Error while activating substitue in UWL
Hello again,
I created a substitue profil "ESS" and a task classification "LEAVE".
I also assigned the classification "LEAVE" to the substitute profil "ESS".
Via TX pftc I made the task TS 12300097 (Approval Process) a "General Task" with classification "LEAVE".
When I switch on the substitution profil "ESS" in the UWL on portal side, I get the following error message:
System: AdhocSystem | Status:failed | Message: System does not support these tasks.
We are using SAP ECC 6.04 and the NetWeaver Portal.
Thank you.
did you check these steps
You can arrange tasks and workflows into various classes within the SAP
System. The classes professional, personal and disciplinary are
standard. The system checks the task class under the field name
TASK_CLASS in the authorization object S_WF_WI. This system uses this
authorization object to check the authorization for carrying out
specific actions on particular work items. The assignment of tasks to
classes is also important in the definition of substitutes. You can
also define that only those classes are displayed which refer to tasks
or workflows of a particular class. Take this into account when you
create new classes and assign tasks or workflows to the classes.
You can set this classification via:
SPRO
=> IMG
=> Basis Components
=> Business Management
=> SAP Business Workflow
=> Basic Settings
=> Maintain Task Classes.
Once the classification has been added as above you can then add this to
your task. Goto PFTS => Enter task ID => Change Mode => Menu: Addition
data => Classification.
See SAP online help at:
http://help.sap.
com/saphelp_nw70/helpdata/en/c5/e4b5eb453d11d189430000e829fbbd/framese
t.htm
[2] Substitute Profile
You can define one or more substitutes for working with the Business
Workplace. The authorizations of a substitute are determined by the
substitute profile which you assign to him/her when you set up the
substitution. A substitute profile comprises specific task classes.
Task classes describe individual tasks or standard tasks. This
assignment is made in the task definition. A user you have specified
can then log on as your substitute. "Your" work items are displayed to
the substitute in their Business Workplace with the restrictions
resulting from their substitute profile.
You can set the substitution profile via:
SPRO
=> IMG
=> Basis Components
=> Business Management
=> SAP Business Workflow
=> Basic Settings
=> Substitute Profile
=> Define Substitute Profile
or
See SAP online help at:
http://help.sap.
com/saphelp_nw70/helpdata/en/c5/e4b5eb453d11d189430000e829fbbd/framese
t.htm
Similar Messages
-
Error while activating a routine "no object list"
hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
NishantTry running program RV80HGEN.
Regards,
Naiimesh Patel -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while Activating / running Bex queries/reports
Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BIGoto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A -
Error While activating 0Material(BI7)
Dear Gurus,
I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
manythanks
arunDear gurus,
We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited". Guys could u help us with this??
manythanks
arun -
Error while activating Infocube
Following error while activating after creating new Infocube:
No active nametab exists for /BIC/DDPCW14DFD1
Termination due to inconsistencies
Table /BIC/DDPCW14DFD1 (Statements could not be generated)
Enhancement category for table missing
The cube is being made as a exact copy of an existing activated and correctly working cube.
Can anyone shed some light on this?
======================================
MORE detailed error:
RED- Error
GREEN-Fine
YELLOW-Warning
RED Error/warning in dict. activator, detailed log --> Detail
GREEN Activate table /BIC/DDPCW14DFD1
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN A table called /BIC/DDPCW14DFD1 exists in the database
RED No active nametab exists for /BIC/DDPCW14DFD1
RED Termination due to inconsistencies
RED Table /BIC/DDPCW14DFD1 (Statements could not be generated)
GREEN Error number in DD_DECIDE (9)
YELLO Flag: 'Incorrect enhancement category' could not be updated
GREEN Table /BIC/DDPCW14DFD1 was not activated
GREEN Activate table /BIC/DDPCW14DFD2
YELLO Enhancement category for table missing
YELLO Enhancement category for include or subtype missing
GREEN Table /BIC/DDPCW14DFD2 must be created in the database
=============
Thanks,
MohnishCan i know in which environment are you working? BW 3.5 OR BI 7?
-
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM -
Error while activation of mapping
Hi experts,
i am getting folowing error while activation of the mapping object. Checked the cache and updated it .
there are no locks by any user also
Version management was unable to execute the last action because a temporary internal lock has been set. Repeat the action
please help if you faced similar issue.
Regards,
srinivasHi,
Did you have a chance to look at this thread?
Internal lock version management : Unable to copy objects
Regards,
Ravi -
Error while activating DTP in BI 7.0
I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK -
Error while activating transformation in BI 7.0
HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
SheelaHi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K -
Error while activating in 3.1H
Hi Guys,
I have an issue, I am copying a standard program for payment advice RFFOD__V into a Z-program ZRFOF__V and is working fine.
Now I have got another copy of RFFOD__V i.e. ZRFOD_B from a portugal system and now when I am try to copy the program ZRFOD_B from Portugal system to my system, I am getting some errors while activating stating that some data elements are not defined. The same data elements are used in the standard program RFFOD__V and is activating correctly, it is also working fine with ZRFOF__V, the problem only lies with ZRFOD_B.
Please note that I am using 3.1H system. Also please let me know how do you activate multiple programs together (i.e. a program and certain includes in 3.1H system).
Awaiting for your reply,
Thanks and Regards.
Mohammed.Mohammed:
It's been a while since I used 3.1H, but when you go to activate your program, doesn't it give you a list of all inactive objects? If so, can't you highlight the program and all related includes and click on the green check mark to activate all programs at the same time?
.. Craig
Maybe you are looking for
-
I just updated my phone to IOS 8.1.3 and I'm having troubles. None of my music is syncing as well as anything else I try to sync. As for the bar at the bottom of the iphone summary screen there is no Music photos, app or anything its just a big yello
-
Limitation of 60 characters for namespace?
Hi, I try to upload an external message definition (XSD) with a message belonging to a namespace with a name longer than 60 characters. Doing this, the Message does not appear on the "Messages" tab. If I manually edit the namespace and shorten it to
-
Hi Experts, This is Suma Mani ,my client having retail stores in India and back support is SAP ECC6.0.My business wants cummulative tax figures would requires post with sales docuemetns not line item wise. Evey busines transaction should be one tax l
-
HT5449 How do I find edit functions such as delete and backspace in mac OX dictation
I can not find delete, backspace or other edits functions. Is there a hands-free alternative to press function key.
-
Hi All, We have two Purchase organizations: 1000 and 2000. Purchase Org is used only for Inter and Intra company stock transport Orders and for the consignment. But, SAP doesn't throw any error when Purchase Org 1000 is used for the Intra-company sto