Error while activating TCT and BI admin. Cockpit (Urgent)

Hi Experts,
                We are configuring NW 04s BI system right now. We have followed the general settings on the system after Basis handed that over to us accrding to Best Practice config. document. Now to install BI administration cockpit, we need to activate the technical content for executing the BI Admin. cockpit. First of all, when we tried to install technical content automatically, we got this error msg no. RSTCO_UT013 and in our 2nd trial we are getting err msg no RSQBW400. First msg was about the job BI_TCO_ACTIVATION failure. Second msg is " There is no A version of Infoset 0RSTT_I07. Because of the errors, we are not able to install any standard business content. Every time we run a background job, it gets cancelled.
We are applying the OSS notes no. 965386 and 934484. If any one has any idea of resolving the issue plz. let us know. Full points will be awarded for the correct answers. Thanks <b></b>

Hi All,
This is best practice in activating BI Statistics and Admin Cockpit.
BI Administration Cockpit and new BI Statistics Content in SAP NetWeaver 2004s - Webinar Details
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
I recomend to use BI CONT 703 SP5.
If not,  you need do manual correction and apply more than 50 notes.

Similar Messages

  • SQL error while activating DSO and loading Mater Data

    Hello Experts,
    we are having process chains which include process activating DSO and loading to Master data,
    while executing achai, we are getting error:
    An error occurred during confirmation of process 000008. See long text
    Message no. RSODSO_PROCESSING024
    Diagnosis
    Note the detailed system message:
    An SQL error occurred when executing Native SQL.
    when i go to T-Code: ST22
    the diagnosis is below:
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          20.05.2010 22:18:02
    What happened?
         The database system detected a deadlock and avoided it by rolling back
         your transaction.
    What can you do?
         If possible (and necessary), repeat the last database transaction in the
          hope that locking the object will not result in another deadlock.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Could you please help me out how can i deal with this issue, .
    Regards
    Sinu Reddy

    it seems that the target you're loading to is already locked by another load...if it concerns a master data is also possible that the master data is locked by a change run. check your scheduling and make sure you don't load the same target at the same moment...
    M.

  • Error while activating transfer structure and communication structure.

    Hi all,
    I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
    I mean same datasource comming from two R/3 instances and connecting to one infosource.
    <b>Maximum length of segment is 1000 characters, current length is 2567</b>
    Please let me know.
    thanks,
    Sabrina.

    Hi Sabrina...
    there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
    Anyway, it suggests:
    "the transfer method in the transfer rules must be set to TRFC with ODS"
    Hope it helps!
    Bye,
    Roberto

  • Error while activating a routine  "no object list"

    hi
    I am getting a error while activating a routine Rv50c601
    "There is no object list for INCLUDEs"  Please suggest on the error and resoulution
    regards
    Nishant

    Try running program RV80HGEN.
    Regards,
    Naiimesh Patel

  • Error while activating transformation  ----   Message no. RSTRAN510

    Hi,
    while I am Extrating Data From Flat File I encountered this Error.
    I am working on <b>ECC 6.0 , BI 7.0.</b>
    I am trying this one in IDES, it is newly installed server.
    For Flat File Extraction I follwed the Steps
    1) I created Data source -
    let us assume I have created a Flat File with 3 fields
    SNO SNAME MARKS
    File is located in workstation
    Data source created successfull , I have checked in preview.
    2) I have created 2 key Figures, 1 characteristic
    3) I have created Infocube
    <b>here I have some doubt</b>
    while I am creating Infocube, the look and Feel is very different to 3.XX
    when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
    when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
    I created Like this
    select
    Info Area -
    > create Info cube   -
    given name of the cube and create (F5).
    the Info cube window displayed on the Right side
    Then I did like this
    select
    key Figures -
    > Info object Direct Input   
    Then I inserted my two key figures SNO,MARKS
    --- continue (F5)
    Dimension 1 -
    >  Info object Direct Input    
    I inserted the 1 char  SNAME
    --- continue (F5)
    Then I saved the Info cube
    Info cube saved successfull and activated successfull
    <b>Is it Right way For create InfoCube ?</b>
    4) I created Transfomation for the Data source
    Data source -
    > create Transfomation
    I have given
    Object Type  : InfoCube
    Name           :YSTU    - i selected which I already created.
    It automaticall taken these parameters
    Obejct Type     : DataSource
    Data source     : YSTU
    source system :PC_FILE
    create Transformation (Enter)
    I got the Error
    <b>Cannot generate proposal</b>
    <b>Message no. RSTRAN017</b>
    Then I try to activate, I got the Error.
    <b>Error while activating transformation</b>
    <b>Message no. RSTRAN510</b>
    Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
    I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
    I did mistake any where.
    Help me to Find the solution...
    sure you can get the points
    Thanks
    prasanna

    Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
    and i created Info Package too for the Data source , created successfully.
    I am struck on Final step  <b>creating DTP</b>
    when I am creating DTP
    Data Transfer Proc  : here I need to give the Dtp name ex: YDTP
    DTP Type               : Standard (Can be sheduled)
    Target of DTP
    <b>Object Type</b>       : Info cube
    <b>Name </b>               : YSTU  (This is my Cube Name)
    Source of DTP
    <b>Object Type</b>     : Data source  (It automatically Taken)
    <b>Data source</b>     : This is Disabled
    <b>Source system</b>:  This is Disabled
    continue (Enter)
    I got the message ?
    <b>Specify Name of source</b>
    and courser is in <b>Data Transfer Proc </b>
    Thanks
    prasanna

  • Error while activating Transformations

    Hi gurus,
    Iam facing a problem while activating Transformations.
    Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL  Data type is Amount, currency is fixed INR.
    But iam getting following errors while activating transformations.
    1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
    2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
    3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
    Regards
    Amar.

    Hi,
    Map it with required Unit filed from your Source .
    Mayank

  • Error while Activating / running Bex queries/reports

    Hello
    I have following ERRORs while activating / running BEx reports/queries.
    1. While Activating BEx reports, I keel getting following ERRORS
    Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
    Error when activating element BX7FOOKQB4588RROCBTC2YVZN
    BEx transport request 'BIDK901352' is not available or not suitable
    2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
    3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
    4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ? 
    Thanks, Sorry I have asked multiple questions, in jst one thread.
    BI

    Goto SE03 -->Search for Objects in Requests/Tasks  option , select the object type and execute it will give all the transports it has collected before ..
    Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
    Thanks,
    Ravi

  • Error while activating transformation

    Hi Experts,
    I need to activate a transformation between a cube and DSO.
    But I am getting an error message while activating the Transformation the messages are as followed.
    1. Error when writing routines
       Message Number. RSAA561
    2. Error while activating transformation
        Message Number. RSTRAN510
    3. Error activating transformation.
       Message number. RSO404
    I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
    Regards
    Shubh Karan

    Might be a problem with the time conversion routines. delete the transformationa nd try again.
    Good luck,
    vijay

  • Error while Activating DSO Data

    Hello
    I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
    "Activation of M records from DataStore object 0FIAR_O03 terminated"
    Thanks

    Hi,
    The activation would have failed due to varies reasons..
    It would be a short dump,check in ST22.
    check the job log in SM37 for better understanding of the issue.
    Have you loaded the respective master data?
    if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
    So if the master data is not loaded then the activation would fail.
    It can also be due to the system performance at that moment.
    Even if the data volume is huge ,there are chances of the activation failing..
    Try repeating the activation once again.it might succeed..
    Else check the logs to understand the actual issue.

  • Error while activating DSO

    Hi,
            I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
    "Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
    Message no. BRAIN290
    Diagnosis
    Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
    Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
    Procedure
    Check the origin of the characteristic value. If possible, change the characteristic value in the source.
    Incorrect source text in update routines and transfer routines can also cause this problem."
    Any thoughts how I should correct/

    Hi Tanu,
    this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
    Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
    Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
    This should correct the issue.
    regards,
    Naveen.A

  • Error While activating 0Material(BI7)

    Dear Gurus,
                     I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
    manythanks
    arun

    Dear gurus,
                     We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
    1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
    2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited".  Guys could u help us with this??
    manythanks
    arun

  • Error while activating Infocube

    Following error while activating after creating new Infocube:
    No active nametab exists for /BIC/DDPCW14DFD1     
    Termination due to inconsistencies     
    Table /BIC/DDPCW14DFD1 (Statements could not be generated)     
    Enhancement category for table missing     
    The cube is being made as a exact copy of an existing activated and correctly working cube.
    Can anyone shed some light on this?
    ======================================
    MORE detailed error:
    RED- Error
    GREEN-Fine
    YELLOW-Warning
    RED     Error/warning in dict. activator, detailed log  --> Detail     
    GREEN     Activate table /BIC/DDPCW14DFD1     
    YELLO     Enhancement category for table missing     
    YELLO     Enhancement category for include or subtype missing     
    GREEN     A table called /BIC/DDPCW14DFD1 exists in the database     
    RED     No active nametab exists for /BIC/DDPCW14DFD1     
    RED     Termination due to inconsistencies     
    RED     Table /BIC/DDPCW14DFD1 (Statements could not be generated)     
    GREEN     Error number in DD_DECIDE (9)     
    YELLO     Flag: 'Incorrect enhancement category' could not be updated     
    GREEN     Table /BIC/DDPCW14DFD1 was not activated     
    GREEN     Activate table /BIC/DDPCW14DFD2     
    YELLO     Enhancement category for table missing     
    YELLO     Enhancement category for include or subtype missing     
    GREEN     Table /BIC/DDPCW14DFD2 must be created in the database     
    =============
    Thanks,
    Mohnish

    Can i know in which environment are you working? BW 3.5 OR BI 7?

  • Error while activating Transformation CO_OM_WBS_3

    Hi everybody,
    i get the following error message while activating the transformation for  CO_OM_WBS_3 in Dev
    Error while activating transformation
    Message no. RSTRAN510
    Error when writing routines
    i checked the routine for co_om_wbs_3 the syntex was correct.
    i have checked in forum am not getting clear picture  please guide me and
    sap component version : SAP EHP 1 for SAP NetWeaver 7.0
    SAP_BW    7010006    SAPKW70106
    BI_CONT    704   0006  SAPK-70406INBICONT
    Regards,
    Sunder

    Dear anand,
    thankyou
    Regards,
    sunder
    Edited by: sundersham on Mar 28, 2010 12:34 PM

  • Error while checking in and storing

    Dear All
    I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
    Error while checking in and storing
    Message no. 26253
    What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
    Regards
    chandra

    Dear Chandra,
    please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
    Best regards,
    Christoph

  • Error while activation of mapping

    Hi experts,
    i am getting folowing error while activation of the mapping object. Checked the cache and updated it .
    there are no locks by any user also
    Version management was unable to execute the last action because a temporary internal lock has been set. Repeat the action
    please help if you faced similar issue.
    Regards,
    srinivas

    Hi,
       Did you have a chance to look at this thread?
    Internal lock version management : Unable to copy objects
    Regards,
    Ravi

Maybe you are looking for

  • End User Can Not Open A Form within Responsibility

    Hi to all, I have an end user who tries to click on a form within a responsibility. And the form does not launch. As matter of fact, the browser green progress bar does not show up. There are other forms within that same responsbility that she is abl

  • Burning an mp3 cd for my car...and having the info read?

    Hi there, i know how to burn an mp3 cd, but i've never made one for the car, which as the mp3 readable player. is there anything special i need to do to the id3 tags to ensure that the artist and/or song comes across the display on the deck? I have a

  • I was wondering if there is a way to have a registration form be triggered when someone tries to download or access a document library

    I have a document library, where I need to have people register their company  info prior to downloading the document(s). I would actually probably like for them to register before they can see or even access the document library items. basically I n

  • IMovie 10 Can NOT Import Files from Older iMovie Projects

    I have older iMovie projects on an external drive and want import/upgrade them to iMovie 10. After choosing the old projects, iMovie 10 examines the old projects for a while and then gave me a list of files that it cannot import. The files I remember

  • Chat Server Help

    I'm developing a chat server and I am handling it with threads. I developed a executable class to handle all and I'm putting all the users in two Hashtables. There are two kinds of users. I need to know how many users do you gurus believe it can supp