ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Similar Messages

  • Error while activating the business content object

    Hi guru,
    We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
    So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
    but once done with the installation when i try to find the object and display it
    that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
    "_settings for material number conversion not found"_*
    so please help me out what is the problem
    Thanks

    Thanks Subash Balakrishnan for replying,
    but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
    Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
    then instead of showing me the object properties screen it gives me the error as mentioned above,
    so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
    now i hope my problem is quiet explanatory so please help me.
    Thanks

  • Error while activating the Business Content

    Hi BI gurus,
    I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
    Can any one give solution for this. This is very urgent,
    With Regards,
    Balachander.S

    And also check whether there are any dumps in ST22.
    Khaja

  • Error in transfer structure while activating the business content

    Hi all
            we got the following error while activating the transfer rules( business content) :
    1)error when determining a number from object BI_TSDTEL and number 01
    2) object name can only contain characters from syntactical character set.
    3) data element for infoobject WAERS 0CURRENCY could not be created.
    can anyone please explain what is this error.

    Hello Tilak,  
    Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
    If the above doesn't fix then try the below
    Goto SE14 -> Transfer Structure Name -> Adjust and activate .
    This will fix if there is any inconsistency in the transfer structure.
    [Thanks|http://chandranonline.blogspot.com/]
    [Chandran|http://chandranonline.blogspot.com/]

  • Error in Activating the Business Content Infocube 0CRM_C08

    Hi Experts,
    when iam trying to activating the business content infocube 0CRM_C08
    iam getting few errors
    Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
    Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
    Error-3:- Authorization field CRM_SALORG still being used in authorization objects
    Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
    Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
    Can anyone please clarify regarding these kind of errors.
    What i have to do for make a successfull activation
    Thanks in Advance
    ARUN

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Error while activating standard business contents e.g : 0SD_C11, 0SD_C12

    Hi Friends,
    I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
    When i stimuldate following are the errors:
    80BP_ID not maintained
    Data source 0DBDUNS_IMPORT_ATTR not maintained
    Error while reading InfoProvider 0SD_O01 etc...
    Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...

    Hello,
    Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
    1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
    2] Check the same is been replicated in BW or not.
    3] The time stamp from both source system & BW system should match, otherwise replicate it again.
    Hope this helps.
    Regards,
    Atul...

  • Errors while transporting the Business Content

    hi all,
    we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
    it says Method Execution - Action Cancelled.
    am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
       Start of the after-import method for object type R3TR IOBJ (Activation Mode)            
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       Interval 01 of number range RS_OBJNUMG is missing   > Long text                         
       InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available 
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
       Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available            
       Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available           
    Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L                
    The errors affect the following components:                                    
        BW-WHM (Warehouse Management)                                               
    Ended with return code:  ===> 12 <===              
    please revert bact at the earliest....
    Thanks
    Manicks

    hi Manicks,
    check if oss note 903291 helps
    Transporting DataSources
    Transport problem ...Urgent
    Transport Issue
    Number range object missing NRIV and cant activate IOBJ during import
    try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
    also try >> all combined tests >> master data >> check master data for characteristics.
    or run program RSDG_OBJNUMG_CREATE_INTERVAL
    have a try oss note 903291 ?
    Manual solution
    Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
    - RS_OBJNUMG: 0000001 - 9999000
    - RSDDAGCUBE: 100000 - 199999
    - RSSBRAUTH: 00000001 - 99999999
    BW 3.0B
    Import Support Package 30 for 3.0B
    BW 3.10 Content
    Import Support Package 24
    BW 3.50
    Import Support Package 16
    BW 7.0
    Import Support Package 07

  • Error while activating PM Business Content DSO 0PM_DS01

    I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
    But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
    Has anybody else also faced a similar error?
    TIA
    Abhishek

    Hi,
    Please stop posting multiple threads for the same post :
    Unable to activate the DSO in PM Business Content
    Suggest you close out one thread and just keep one active.
    Cheers,
    Kedar

  • Error while installing the Business Content 2lis_03_bf Transformation

    Hi,
    I have installed total 0ic_c03 cube and successful.
    Data is populating correct. When ever Releasing the Request error getting which Local objects not captured in request which are there in 2lis_03_bf info source, For this Error I have deleted the objects from info source and activated and activated transformation. But those object are there in the ROUTINES and disturbed. KEYFIGURES Routine are disappeared.
    Again when have installing the BF infosource and transformations from Business content is getting below error. for Ref below screen shot.
    Please advise me : urgent
    Thanks & Regards,
    Srinu.Rapolu

    Hi,
    it seems like issue with ABAP routine.
    Can you try to get detail error by doing syntax check.
    Also if you are in BW 7.31 - I notices while releasing it shows error. I will suggest ignore it and just released. it worked for me.
    You always have option to recapture the transport and resend the same objects, if earlier failed.
    Thank-You.
    Regards,
    VB

  • Error While Installing the Business Content Query

    Dear Friends,
    We are in BI 7.0 and trying to install a business content query "Balance Sheets Profit and Loss Statement" but while activating we are getting the error that some Particular Request has not been found or not suitable. we checked for that request in SE09 and found that there is no such request existing in the system. So what could be the cause of the Error and what to do for successfully Installing the Query.
    Thanks ..
    Anurag

    Are you assigning a new request or  creating a new one? Try to assign to a new request if you are not doing so.
    Thanks
    Wind

  • Error during activation of business content

    Hi
    I am facing problems during the activation of the standard business content.
    I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
    while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
    infoobject XXX is not available in version A
    Error when reading data target XXXX
    Data source XX not mantained
    Key figure XXX is not available in version D
    In order to avoid activating pre-installed objects i have deselected them.
    I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
    thanks in advance!

    Hi Everyone!
    Thanks the responses have been encouraging and i do see a glimmer of hope
    since i am fairly new at this I wanted to know
    1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
    2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf  and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
    thanks in advance!

  • ERROR WHILE ACTIVATING THE DATASOURCE

    Hi Experts,
    I'M WORKING ON BW3.0B.I'M GETTING  ERROR WHILE ACTIVATING THE DATASOURCE
    1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

    Hi,
    where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
    Thanks
    Reddy

  • Error while Activating the Standard DSO

    Hi,
    I am getting the below error while Activating the Standard DSO.
    Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
    I tried searching the forum , but didnt find any answer.
    Any suggestions are welcome.
    Thank you,
    Adhvi.

    Hi,
       Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
      If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
    You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
    Thanks,
    Divya.

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

Maybe you are looking for