Error while activating the datasource [UD Connect]. getting error as '&'

Hi Friends,
I am trying to get the data from a SQL source through UD connect.
I do the proposal and map all the info objects to the respective columns.
When i acticate the data source i am getting the error as
'&' and Error while Error when activating DataSource 'ZEFF_ENTRY                     UD_ECUBE'
Please do tell why such errors occur and also the solution to handle such errors.
Thanks in advance.
Veena

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Similar Messages

  • ERROR WHILE ACTIVATING THE DATASOURCE

    Hi Experts,
    I'M WORKING ON BW3.0B.I'M GETTING  ERROR WHILE ACTIVATING THE DATASOURCE
    1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

    Hi,
    where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
    Thanks
    Reddy

  • Error while activating the datasource during migration

    Hi Guys,
    When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
    Error in activating the datasourc----RSO404
    Has anyone encountered this issue? Your input is highly appreciated.
    Regards,
    Doniv

    Voodi,
    Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
    Doniv

  • Getting error while activating the smart form

    hi guys,
    i am getting the following run time error while activating the smart-form.
    'SQL error in the database when accessing a table'.
    can anyone tell why this error is coming

    Refer to the below link, it may help you to close the thread.
    [SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
    Regards,
    saiRam

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • Error while activating BC datasources

    Hi guys,
    I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
    Error:
    DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
    this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
    how do i rectify this? any help would be highly appreciated.....

    make sure that the server from which ur data source gets the values are also logged on

  • While activating the ODS i'm getting these errrors

    Hi All,
    While activating the ODS i'm getting these errrors,
    1) The creation of the Export Datasource failed
    2) RFC Connection to the source system is damaged --- no metadata upload
    3) Error when activating ODS object
    What would be the reasons.............?
    Plz Reply back me on [email protected]
    Regards,
    Kiran

    Hi,
    Im finding a similar issue but with task SDE_ORA_GLJournals,
    the code is :
    AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
    AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
    the parameters are also fine in the parameters file.
    Has anyone found a solution or an explanation for this?
    Thanks a lot, regards
    Nestor

  • While activating a request in DSO getting error code 10

    While activating a request in DSO getting error code 10
    Hi All,
    I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
    Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
    I have checked the formula in Transformation and it works fine. Still I am not able to load data.
    Please help.
    Thanks and regards
    Vishal Pardeshi

    Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
    Otherwise you can check the error from the monitor screen of the request in Details tab.
    Veerendra.

  • Error while activating the infoobject 0MATERIAL

    Hi Experts,
    Iam trying to activate 0MATERIAL infoobject.
    But while activating the particular infoobject iam getting few errors saying that
    InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIAL
    InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BD) of characteristic 0MATERIAL
    Please help me out in activation of the infoobject.
    Thanks in Advance
    ARUN

    Hi,
    The object has been used in the Material classification Data source as well(1CL_OMAT001_BB) as per ur thread....
    In this case.. u need to make sure that the mapping to this object at the transfer rules are maintained properly or not.. if not try to maintain this object mapping properly in Tranfer rules and check the object is been used in the 0Material as well....
    Activate the Infosource once u does these changes.. and check 0Material gets activated properly or not..
    Also use use this program for activating ur object:
    RSDG_IOBJ_ACTIVATE
    thanks
    Assign points if this helps

  • Error while activating the ods ( prod.issue)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    <b>Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.</b>
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi Rakesh
    The error message
    "Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
    Please check your ODS settings, if 'Unique Data Records' is checked or not.
    Sorry for my late response!
    Regards
    GSK

  • Error while activating the ODS (high priority ticket)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi,
    ODS activation error
    Re: ODS Activation Failed with Status 5
    ODS activation is failing with  incorrect with status 5 erro
    Re: Error Activating the ODS data
    ODS Activation error
    Regards,
    San!

  • Error while Activating the Standard DSO

    Hi,
    I am getting the below error while Activating the Standard DSO.
    Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
    I tried searching the forum , but didnt find any answer.
    Any suggestions are welcome.
    Thank you,
    Adhvi.

    Hi,
       Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
      If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
    You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
    Thanks,
    Divya.

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • While activating  Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting error

    Dear all
    While activating the Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting the following error
    Error when writing routines
    Message no. RSAA561
    Error while activating transformation
    Message no. RSTRAN510
    Error when activating Transformation 0N7SM4TBBDTRG1KKDKS3QRMWAHMV490Q
    Message no. RSO404
    plz guide me seniors
    Regards,
    Sunder

    Hi,
    Make sure your routines are syntatically correct in the transformation before activation.
    still it is giving the same error please elaborate the issue and post it over here.
    Thanks
    Suresh

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

Maybe you are looking for

  • Interactive Report in oracle application Express

    Hello, I am new User in oracle application express apex . I've created interactive report .when i click download option then choose html format. but there are some problem .there are no header and footer in the page. how to add dynamic header and foo

  • Real-Time Data Sync-up between Oracle and MS SQL Server

    Hi All, I am looking for a solution to sync-up the data between Oracle and MS SQL Server in real time. Here, the structure of table is different (in the sense, the data in multiple table in SQL Server should be combined and put it in a single table i

  • Flash Player 10 Crashing/Freezing IE 8

    I've recently upgraded my laptop to Widows 7 and everytime I go to a site supporting Flash Player it crashes my Internet Explore 8 (The browser just freezes and is "not responding).  I've tried the following: 1.  Uninstalling and reinstalling Flash P

  • Error when executing report

    Hello, When trying to run a report on the web, at the execution, when the report should show data, the page appears blank. When debugging the following error appears: An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handle

  • DVD@ccess gor Visto and seven

    can you tell me if you known a software DVD@ccess update for Vista and Windows seven