Error while Activating the Info Source.

Hi Gurus,
We are in BI7 & SP14.
Here I am Activating the Infosource "0CO_OM_OPA_2" which i already assign the datasource "0CO_OM_OPA_2" to "0OPA_C11"Cube.But i am getting the following error message "Data element for InfoObject KOKRS 0CO_AREA could not be created".
Here the whole flow i am doing in old version(3.5).
Any one can help me to solve this issue.
Thanks
Raju.k

Please check your Infoobject is active or not. Even it is active please reactivate and check once again.

Similar Messages

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating the info object.

Hi,
While activating one of the info objects, i am getting the following error message:
Characteristic 0BP_GRP: Cannot switch off InfoProvider property
Message no. R7B289
Diagnosis
The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
Procedure
If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
Thanks and Regards
Niren.

Hi Niren,
Check the below thread..
Howto Remove 0Employee Char from my InfoArea
Hope it helps..
Regards,
Ramki.

Run Time error while activating the cube 0pp_c03

Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
Rohit

Hi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa.

Error when activating the Info set

Hi all,
I have created an Infoset on 2 infocubes, in both of them i am having navigational attributes, but either in infoset backend or front end i am not getting the navigational attributes.
For getting these navigational attributes i added masterdata objects for which i need to get navigational attributes to the infoset and mapped them to the data target objects.
while the infoset is having only cubes the infoset worked fine expect nav attributes.when i added these masterdata objects to the infoset i am getting error while activating the info set.
It does not have any description even to find out the solution.
Please let me know the solution as soon as possible.
thanks in advance,

Hi Sarau,
I think Multiprovider ( Multi Cube ) is the best option than Infoset.......
with hopes
ARS

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Error while activating the request of DSO upload

Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.

hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps.

Error while activating the infoobject 0MATERIAL

Hi Experts,
Iam trying to activate 0MATERIAL infoobject.
But while activating the particular infoobject iam getting few errors saying that
InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIAL
InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BD) of characteristic 0MATERIAL
Please help me out in activation of the infoobject.
Thanks in Advance
ARUN

Hi,
The object has been used in the Material classification Data source as well(1CL_OMAT001_BB) as per ur thread....
In this case.. u need to make sure that the mapping to this object at the transfer rules are maintained properly or not.. if not try to maintain this object mapping properly in Tranfer rules and check the object is been used in the 0Material as well....
Activate the Infosource once u does these changes.. and check 0Material gets activated properly or not..
Also use use this program for activating ur object:
RSDG_IOBJ_ACTIVATE
thanks
Assign points if this helps

Error while Activating the Info Source.

Similar Messages

Maybe you are looking for