Error while activating the ODS "Request No longer Exist in ODS".

Hi All,
I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
But when i am manually activating this it is not giving me any error.
Please suggest solution for the same.
Regards,
Rohan Shah

I had deleted one request from four ODS's before completely loaded from R/3.
Before deleting the request make QM status red and then delete.
when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
Already you have deleted the request. How can you activate the same request?
Have you loaded the data again?
With Regards,
Kishore.
Edited by: Siv Kishore on Apr 22, 2009 3:58 PM

Similar Messages

  • Error coming while activating the data request at DSO level

    Hi to all,
    please can anybody tell me the solution for that.
    While activation the data request at DSO level  , i am getting error .
    Value 'R2S-11.60UML  ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
    Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
    Process 000001 returned with errors
    this error is coming under SID Generation .
    I shall be thnakfull to you for this.
    Regards
    Pavneet Rana

    Hi Rana,
    Activation failed because of the special characters in the Omaterial
    Delete the request in target
    edit it in the specific record in PSA and load it back
    In your case i think its a space problem u can see a space after L
    delete the space for the record and load it again
    Regards,
    MADhu

  • Error while Activating the Standard DSO

    Hi,
    I am getting the below error while Activating the Standard DSO.
    Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
    I tried searching the forum , but didnt find any answer.
    Any suggestions are welcome.
    Thank you,
    Adhvi.

    Hi,
       Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
      If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
    You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
    Thanks,
    Divya.

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • ERROR WHILE ACTIVATING THE DATASOURCE

    Hi Experts,
    I'M WORKING ON BW3.0B.I'M GETTING  ERROR WHILE ACTIVATING THE DATASOURCE
    1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

    Hi,
    where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
    Thanks
    Reddy

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

  • Getting error while activating the smart form

    hi guys,
    i am getting the following run time error while activating the smart-form.
    'SQL error in the database when accessing a table'.
    can anyone tell why this error is coming

    Refer to the below link, it may help you to close the thread.
    [SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
    Regards,
    saiRam

  • Run Time error while activating the cube 0pp_c03

    Hi All,
    I encountered this error while activating the info cube 0pp_c03
      An exception occurred which is explained in detail below.
      The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
      and
      therefore caused a runtime error.
      The reason for the exception is:
      No text available for this exception
    Regards
    Rohit

    Hi,
    Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
    or
    Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
    Regards,
    Marasa.

  • Error while activating the ods ( prod.issue)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    <b>Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.</b>
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi Rakesh
    The error message
    "Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
    Please check your ODS settings, if 'Unique Data Records' is checked or not.
    Sorry for my late response!
    Regards
    GSK

  • Error while activating the ODS (high priority ticket)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi,
    ODS activation error
    Re: ODS Activation Failed with Status 5
    ODS activation is failing with  incorrect with status 5 erro
    Re: Error Activating the ODS data
    ODS Activation error
    Regards,
    San!

  • Error while activating the request of DSO upload

    Hi all,
    While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
    'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
    Is it because no translation exists,if so what should be done for the same.
    Thanks in advance,
    Chintu.

    hi Chintu,
    it seems unit BBL not exist in your bw system,
    you can update the unit master from r/3,
    have you performed 'transfer global setting' ?
    check in r/3 table t006a (t006*), if exist you can
    rsa1->source system->right click r/3 source system
    'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
    this update should be scheduled periodic, menu program->run in background and schedule periodic job.
    if BBL not exist in r/3, you can manualy maintain,
    transaction CUNI.
    hope this helps.

  • Error while activating the ODS

    Dear Experts,
    Please help me out,
    I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
    Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
    Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
    SID determination finished for InfoObject 0DOC_HD_TXT
    I have also read out all the related post & also applied them in this but still the position is same.
    also in RSKC, all the characters are allowed.
    please suggest.
    Thanks in advance
    Neha
    Process 000090 returned with errors

    Hi,
    Pliz go thru below article for restricting Invalid chars.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
    It might give u an idea or solve your issue.
    Thanks,
    Jitender.

  • SID Generation Error while activating the DSO.

    Hello Gurus,
    Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
    In dump error, DBIF_RSQL_SQL_ERROR
                        CX_SY_OPEN_SQL_DB
    SQL error in the database when accessing a table.
    So please advice me to solve this problem would be appreciated and reward points.
    Arun

    Hello Arun kumar,
    That's easy you have errors in the field 0REF_KEY3.
    Since it is a DSO it let's you load everything but in the time of the activation it complains!
    The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
    Try to find that record, change it in PSA and reload the request again.
    TCode-E3//Rec.Typ-CO
    The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
    Try to see if you have more records like those and fix them too.
    That should work.
    Please assign points if it helps,
    Diogo.

  • Error while activating the data source.

    Dear all,
    We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
    0PM_OM_OPA_2 the following error is displayed.
    "No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
    Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
    "You can only edit 3.x DataSources using transfer rule
    maintenance Do you want to create the transfer rules now?"
    What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
    Valid experts comment is expected in this regard.
    Regards,
    M.M

    Hi Magesh,
    Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
    Hope it helps..

Maybe you are looking for

  • HT4847 if i delete camera roll from iCloud to free some space, did i loose my photos?

    if i delete camera roll from iCloud to free some space, did i loose my photos?

  • Why can't I make a change to my template?

    I have a template with editable regions and non-editable. The footer is no-editable but I can't make a change to it. I have the telephone number listed twice in the footer and want to remove one of them but can't do it. I get the circle with a line t

  • SQL INSERT permission denied on object Error

    Hi, I am new to Sql server in fact i've only been using it for the last two hours , the create database and create table statements worked fine, I am now trying to insert, delete, and update some records on SQLSERVER 2000, and i am getting this error

  • Outer join style report - OBIEE 10g

    Hi All, I have a requirement to generate a report for product & sales. I have two dimensions and various fact data elements. Some products may not be sold on a month but still i want to display them in the report with 0 value. I have tried this by cr

  • [Major Problem] Problem with Permissions

    For some reason I cannot save files through most things like: * Safari * Preview * Some other apps It comes up with the following error: The document "BLAH" could not be exported as "BLAH.BLAHBLAH". You do not have appropriate access privileges. I ha