Error while activating the request in DSO

Hi all,
I had loaded the data into the DSO from another DSO.
The load is compeleted successfully and the data came to the new data table, but when i activate the request it turns to red, giving some error that sid has changed. what may b the reason for this
Thanx

Hi,
check threads
ODS Object Activation SID changed
Error in assigning SID and activation of ODS
Maybe this helps.
Regards,
Arek

Similar Messages

  • Error while activating the request of DSO upload

    Hi all,
    While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
    'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
    Is it because no translation exists,if so what should be done for the same.
    Thanks in advance,
    Chintu.

    hi Chintu,
    it seems unit BBL not exist in your bw system,
    you can update the unit master from r/3,
    have you performed 'transfer global setting' ?
    check in r/3 table t006a (t006*), if exist you can
    rsa1->source system->right click r/3 source system
    'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
    this update should be scheduled periodic, menu program->run in background and schedule periodic job.
    if BBL not exist in r/3, you can manualy maintain,
    transaction CUNI.
    hope this helps.

  • Error while activating the Data in DSO

    Hello,
    We moved huge amount of FI data from datasource to DSO. After moving all the data, we tried to activate the data. But the mistake we did is we activated all the requests at one go. (my assumption) It turned all the request to Red. The job log says SQL error.
    Is there any way of solving this issue without deleting the data. Data load will take too much time and we would like to avoid it if possible.
    Waiting for inputs!!!
    Regards,
    Abhishek

    yes a Dump was triggered.
    Database error text........: "ORA-12801: error signaled in parallel query
    server P007#ORA-01652: unable to extend temp segment by 2560 in tablespace
    PSAPTEMP"
    Internal call code.........: "[RSQL/FTCH//BIC/AYEPSPFI140 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "CL_RSODSO_ACTIVATE_REQUESTS===CP" or "CL_RSODSO_ACTIVATE_REQUESTS===CM00D"
    "ACTIVATE_DATA_FROM_QUEUE"
    Edited by: Abhishek Nishis on Oct 12, 2009 10:54 PM

  • Error while activating the data into DSO

    Hi
    My base DSO is used to load 4 other data targets.
    In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
    When loading to other DSO, We have encountered an error
    Object is currently locked by BI Remote
    Lock not set for : Activating data in DSO
    Activation of M records terminated.
    1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
    I know that we cannot load the data into base DSO, when base DSO is sending data into target.
    2. What difference does it make when loading DSO to DSO and cube parallel?
    Thanks
    Annie

    Hi Annie.....
    1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
    I know that we cannot load the data into base DSO, when base DSO is sending data into target.
    Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
    Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
    Is any further targets getting loaded from this 2nd level DSO ?
    Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
    Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
    So check it and atart the activation again..
    2. What difference does it make when loading DSO to DSO and cube parallel?
    The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
    A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
    Regards,
    Debjani....

  • Error While Activating the CO-PA DSO

    Hi Friends
    As i am new to CO-PA . I am facing problems while activating DSO.
    Error : Short dump has not been completely stored (too big)
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
      because it has
    come across a statement that unfortunately cannot be executed.
    Error analysis :
        You attempted to assign a field to a typed field symbol,
        but the field does not have the required type.
    Please Suggest me
    Thanks
    Gowtham

    Hi Fathima
    Here is the screen description
    Short text
        Type conflict with ASSIGN in program "GPDI1O4GBC7CYZNYW1LK35LKP6J".
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "GPDI1O4GBC7CYZNYW1LK35LKP6J" had to be terminated
         because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to assign a field to a typed field symbol,
        but the field does not have the required type.
    Trigger Location of Runtime Error
        Program                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
        Include                                 GPDI1O4GBC7CYZNYW1LK35LKP6J
        Row                                     886
        Module type                             (METHOD)
        Module Name                             EXECUTE
    Thanks
    Gowtham

  • While activating a request in DSO getting error code 10

    While activating a request in DSO getting error code 10
    Hi All,
    I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
    Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
    I have checked the formula in Transformation and it works fine. Still I am not able to load data.
    Please help.
    Thanks and regards
    Vishal Pardeshi

    Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
    Otherwise you can check the error from the monitor screen of the request in Details tab.
    Veerendra.

  • Error while Activating the Standard DSO

    Hi,
    I am getting the below error while Activating the Standard DSO.
    Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
    I tried searching the forum , but didnt find any answer.
    Any suggestions are welcome.
    Thank you,
    Adhvi.

    Hi,
       Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
      If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
    You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
    Thanks,
    Divya.

  • BI7.0 Hexdecimal values problem while activating the data in DSO

    Hi Friends,
                     I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
    Error when assigning SID: Action VAL_SID_CONVERT table
      0DOC_HD_TXT     
    Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
    Process 000037 returned with errors.
                it isn't accepting the values like with numberels and chars together
    ex: 1st disb, 70 cr Gen Hsg.
                   I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
    Regards,
    BalajiReddy

    Hi Anil,
                       Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                          Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
            pls tell me the reason, i'm really thankfull for your quick replay
    Regards,
    BalajiReddy

  • ERROR WHILE ACTIVATING THE DATASOURCE

    Hi Experts,
    I'M WORKING ON BW3.0B.I'M GETTING  ERROR WHILE ACTIVATING THE DATASOURCE
    1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

    Hi,
    where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
    Thanks
    Reddy

  • ERROR while activating the Business Content of Sales Cube 0SD_C03

    Hi,
    iam facing an error, iam getting the  error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB--  objects are not available in the D version. if u have any solution for this please share with use also.
    Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
    Thanks,
    Prabhakar.

    Hi Raj,
    I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
    In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
    While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
    ASSIGN_LENGTH_0 " "
    SAPLSNR3 or "LSNR3F01"
    LOCAL_BUFFER
    please treat this as urgent.
    Thanks
    Prabhakar.

  • Error while activating the function module

    hi,
    am getting error while activating the function module i.e. program or report statement is missing.
    thank you in advance
    karthik

    hii vinu,
    hi there....
    make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting  a program call the function module and test it
    I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
    or
    Its common prob with Function module.
    Goto SE80->Give Function group name->Right click on it->Activate.
    regards,
    Shweta

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • Getting error while activating the smart form

    hi guys,
    i am getting the following run time error while activating the smart-form.
    'SQL error in the database when accessing a table'.
    can anyone tell why this error is coming

    Refer to the below link, it may help you to close the thread.
    [SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
    Regards,
    saiRam

  • Run Time error while activating the cube 0pp_c03

    Hi All,
    I encountered this error while activating the info cube 0pp_c03
      An exception occurred which is explained in detail below.
      The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
      and
      therefore caused a runtime error.
      The reason for the exception is:
      No text available for this exception
    Regards
    Rohit

    Hi,
    Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
    or
    Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
    Regards,
    Marasa.

  • UCCX 8.0.2 - error while handling the request

    Hi Guys,
    My Customer have UCCX 8.0.2. He needed did change prompt and when He try to do upload the new script, appear the message: "error while handling the request". Any have idea who solve this problem?
    Thanks,
    Wilson                 

    I saw this before on 8.0.2, I had to delete the prompt/script/document and the upload it again (instead of overwriting it). I believe this was fixed in SU4.
    Edit: this is the bug id - CSCtq23837 (unable to overwrite scripts) - resolved in 8.0(2) SU4
    Brian
    Please rate helpful posts

Maybe you are looking for