Error while activating the transformation for cube

Hi everyone,
I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and 'unit of measure is not used' even though I hav assigned both the fields to Amount infoobject.
would plz explain in detail.
Thank you.

Hi,
Are you loading from the Flat File or from ECC?
If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
Then when you create the Transformation then the Rules will be created Automatically.
Regards,
rik

Similar Messages

HR Stadard Cube 0PA_C01: error while activating the transformation

Hello,
I have migrated the data source 0HR_PA_0 to version 7.
While activating the transformation to HR standard cube, the start routine has the following error:
E:Field "COMM_STRUCTURE-EMPLOYEE" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Where as the migrated source 0HR_PA_1 to standard cube works fine.
Thanks & Regards,
Savitha

Dear Neelesh,
The infosource Generated from 3.x InfoSource Employee
is part the flow.
The flow has
TRCS BI7_HR_PA_0 -> CUBE 0PA_C01
Generated from 3.x InfoSource Employee
RSDS 0HR_PA_0 NEWSR31007 -> TRCS BI7_HR_PA_0
Data Source : Employee
Thanks & Regards,
Savitha

ERROR WHILE ACTIVATION OF transformation in cube?

hi friends,
i am getting below error while activationg my transformations in cube, please let me know solution, how to assign field to infoobject, which tab i need to use.
Rule (target: S1_SUN, group: 01 Standard Group): Conversion type missing
Rule 2 (target field: S1_SUN): Field /BIC/S1_SUN must be assigned to an InfoObject
Rule (target field: S1_SUN): No source unit assigned
regards
suneel.

Hi Suneel,
Hope u doing good!
Well in case of BW 3.5 if you have worked on it. To extract data to a cube or dso we use the standard process of creating infosource,linking it to datasource and creating infopackage. In infopackage we determine the characteristics of the extraction, for eg: should it be delta or full, what would be the error handling method so and so forth.
Well in case of BI 7.0 and higher we no longer need to use the long way. On the concerned Infocube you can right click and hit on create Data Transfer Process which would pop up with another window asking you where your data is residing, you can choose from the options specify the source system and then create the DTP instance.Which it is being created the system generates some rules automatically. This is what I was talking abt. Once you have created you can configure it as if you were configuring the Infopackage.
The update rules which are automatically generated can be checked by clicking on it and seeing if all the rules are appropriate.
Hope I am making it clear for you.
Good Luck,
Raj

ERROR WHILE ACTIVATING THE TRANSFORMATION

Hello Experts,
I am getting the following error when I am activating the transformation between the source (8ZPROT1) and the target (InfoSource for SEM-BCS(Tcube->Datasource) in BI 7.0
" Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 100 (-> long text)"
When I go into the program: GP_ERR_RSTRAN_MASTER_TMPL, here is the error:
CODE:
*-- Check against the additional field I enhanced in the generate data source
*--8ZPROT1
lField: 0BCS_REFYR Reference Year.
0BCS_REFYR TYPE N LENGTH 4,
ERROR MESSAGE:
Program GP_ERR_RSTRAN_MASTER_TMPL
Names may only consist of the characters "A-Z", "0-9" and "_". In
addition, they may not begin with a number. number. number.
The data should flow from the SAP business content, so the fields should start from 0BCS_REFYR.
Can someone explain this?
Thanks.

Hi Experts,
Thanks for the response, but unfortunately I couldnt understand what to do with the Tcode you specified. Any how in the update rules I found that the field KEY FIELD OF THE STRUCTURE icon is not there for all the added fields. Is ther any thing to be done with this check box to mke it as key field?
Sunitha.

Application Error while activating the feature - for creating list content type, list definition and list instance

Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>

<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathya

redeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Run Time error while activating the cube 0pp_c03

Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
Rohit

Hi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa.

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Error while executing the Job for Objects :null Batch Risk Analysis

Hi All,
We've recently upgraded Virsa to version 5.3_14 . I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles. The job does not complete for some objects and it seems to be sporadic and shows this error: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
I've attached the log for your review.
Thanks in advance for your help.
Linda Lewis
Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
WARNING: Job ID:395 : Failed to run Risk Analysis
java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
FINEST: Lock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
FINEST: Unlock:1004
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
INFO: --- BKG User Permission Analysis (System: P20:020) completed --- elapsed time: 4522 ms
Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
Edited by: Linda Lewis on Feb 9, 2011 9:08 PM

Hi,
Was a solution found for this error?
Thanks,
Glen

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Error in END ROUTINE while activating the transformation.

Hi ALL,
While writing an END ROUTINE IN BI, I got no error while saving the code.
But when Activate the Transformation I got the following Error.
" Syntax Error in GP_ERR_RSTRAN_MASTER_TMPL,row 54(->long text)
Diagnosis:Component called CRM_OBJ_ID already exits "
I have used the above object in the transformation.
Please help me debug the error or highlight on it.

Hi,
i guess u have create two object with same variable name.check.
regards,
rakesh

Syntax Error while activating 2LIS_04_P_ARBPL Transformation

Dear all,
While activating 2LIS_04_P_ARBPL Transformation activation , I am facing following error while checking in Routine
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
please help me out for this
Edited by: tjoshi1982 on May 19, 2011 7:11 PM

Following are error that comes after checking routine
0TGTPROCCAP     -
    E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA" statement.
0TGTSETPCAP      -
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"statement.
0TGTTEARCAP    -
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA" statement.
please tell me what to do next,as i already tried to assign source field

Error while activating the transformation for cube

Similar Messages

Maybe you are looking for