ERROR WHILE ACTIVATING THE TRANSFORMATION

Hello Experts,
I am getting the following error when I am activating the transformation between the source (8ZPROT1) and the target (InfoSource for SEM-BCS(Tcube->Datasource) in BI 7.0
" Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 100 (-> long text)"
When I go into the program: GP_ERR_RSTRAN_MASTER_TMPL, here is the error:
CODE:
*-- Check against the additional field I enhanced in the generate data source
*--8ZPROT1
lField: 0BCS_REFYR Reference Year.
0BCS_REFYR TYPE N LENGTH 4,
ERROR MESSAGE:
Program GP_ERR_RSTRAN_MASTER_TMPL
Names may only consist of the characters "A-Z", "0-9" and "_". In
addition, they may not begin with a number. number. number.
The data should flow from the SAP business content, so the fields should start from 0BCS_REFYR.
Can someone explain this?
Thanks.

Hi Experts,
Thanks for the response, but unfortunately I couldnt understand what to do with the Tcode you specified. Any how in the update rules I found that the field KEY FIELD OF THE STRUCTURE icon is not there for all the added fields. Is ther any thing to be done with this check box to mke it as key field?
Sunitha.

Similar Messages

Error while activating the transformation for cube

Hi everyone,
I m working on BI7, & while activating the transformations the system trrows an error saying that 'amount infoobject is not assained' and 'unit of measure is not used' even though I hav assigned both the fields to Amount infoobject.
would plz explain in detail.
Thank you.

Hi,
Are you loading from the Flat File or from ECC?
If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
Then when you create the Transformation then the Rules will be created Automatically.
Regards,
rik

HR Stadard Cube 0PA_C01: error while activating the transformation

Hello,
I have migrated the data source 0HR_PA_0 to version 7.
While activating the transformation to HR standard cube, the start routine has the following error:
E:Field "COMM_STRUCTURE-EMPLOYEE" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Where as the migrated source 0HR_PA_1 to standard cube works fine.
Thanks & Regards,
Savitha

Dear Neelesh,
The infosource Generated from 3.x InfoSource Employee
is part the flow.
The flow has
TRCS BI7_HR_PA_0 -> CUBE 0PA_C01
Generated from 3.x InfoSource Employee
RSDS 0HR_PA_0 NEWSR31007 -> TRCS BI7_HR_PA_0
Data Source : Employee
Thanks & Regards,
Savitha

ERROR WHILE ACTIVATING THE DATASOURCE

Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDR

Hi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Run Time error while activating the cube 0pp_c03

Hi All,
I encountered this error while activating the info cube 0pp_c03
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Regards
Rohit

Hi,
Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
or
Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
Regards,
Marasa.

Error in END ROUTINE while activating the transformation.

Hi ALL,
While writing an END ROUTINE IN BI, I got no error while saving the code.
But when Activate the Transformation I got the following Error.
" Syntax Error in GP_ERR_RSTRAN_MASTER_TMPL,row 54(->long text)
Diagnosis:Component called CRM_OBJ_ID already exits "
I have used the above object in the transformation.
Please help me debug the error or highlight on it.

Hi,
i guess u have create two object with same variable name.check.
regards,
rakesh

Syntax Error while activating 2LIS_04_P_ARBPL Transformation

Dear all,
While activating 2LIS_04_P_ARBPL Transformation activation , I am facing following error while checking in Routine
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
please help me out for this
Edited by: tjoshi1982 on May 19, 2011 7:11 PM

Following are error that comes after checking routine
0TGTPROCCAP     -
    E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA" statement.
0TGTSETPCAP      -
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"statement.
0TGTTEARCAP    -
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA" statement.
please tell me what to do next,as i already tried to assign source field

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while activating the request of DSO upload

Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.

hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps.

Access dynamic attributes BPM; error while activating the process in sxi

hi everybody,
I have to access dynamic attributs in a BPM condition. I thought I could achive this when I click the radiobutton "contextobject" in the condition editor.
When using the value-help button on the contextobject a huge list of objects is shown for selection.
Strange to me is that also the radionbutton "interface-variable" is checked. I can not uncheck this radiobutton. But this makes the error while activating:
"Containerelement 'IDOC_'MyContainerelement'{XSDSIMPLE::xsd:string;SHeaderSUBJECT:ht' does not exist".
Has anybody expirience using the dynamic attributes/contextobjekts in BPM?
Thanks, Regards Mario

Hi all,
it seems to be impossible to access the attributes:
Technical Context Object in ccBPM
Regards Mario

ERROR WHILE ACTIVATING THE TRANSFORMATION

Similar Messages

Maybe you are looking for