Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

Hi,
I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
1. Transfer structure 0CUSTOMER_TEXT_BA does not exist and
2. Data element for TXTMD could not be created.
Can you please suggest me how to resolve these issues ?

did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

Similar Messages

Error while activating Transfer Structure

Hi Expert,
we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
Message no. EA201
Diagnosis
An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
System Response
The operation was canceled.
Procedure
Please check whether the relevant entry already exists
I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
Regards,

Hi Dubey,
I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix this.
Thanks,
Renu

Error while activating transfer structure and communication structure.

Hi all,
I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
I mean same datasource comming from two R/3 instances and connecting to one infosource.
Maximum length of segment is 1000 characters, current length is 2567
Please let me know.
thanks,
Sabrina.

Hi Sabrina...
there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
Anyway, it suggests:
"the transfer method in the transfer rules must be set to TRFC with ODS"
Hope it helps!
Bye,
Roberto

Error while activating transfer rules needs help.

The error while activating 0FI_AP_6 transfer rules is listed below.
''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

Hi
The problem is with your data source replication.
Activate your data source & replication too.
Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
If not so, Activate your transfer rule manually.
Regadrs
Saravanan.ar

Error while activating transfer structure for 0MATERIAL_ATTR

I am trying to activate the transfer rules of 0MATERIAL_ATTR, but when activating the process end with the following message:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        1,792
Message:    The data object "P_S_COMM" has no component called
I cannot activate the transfer rules of 0MATERIAL_ATTR and 0MATERIAL_TEXT because of the same problem. Could anyone please help me...
Thanks in advance for your valuable help.
Regards
Carlos España.

Ron Silberstein:
I really appreciate your help, thank you very much.
I saw your profile, and i saw that you are an expert in BI.
Congratulations, your help was very important for me.
CONTINUE HELPING OTHER PEOPLE!!!!! T H A N K S!!
God Bless you.
Regards
Carlos España.

Error while activating transfer rules

Transfer method 'TRFC with PSA' is not supported by the source system
Message no. RSAR508
Diagnosis
The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
Procedure
Define the PSA in the source system.

Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
If you still face this error even after changing Transfer method, check below thread.
Transfer method 'TRFC with PSA' is not supported by the source system
Edited by: koundinya karanam on May 22, 2008 12:47 PM

Run time error while activating the Transfer Rules

Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
Kishore

Hi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error while activating DTP in BI 7.0

I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.

Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK

Error while activating standard business contents e.g : 0SD_C11, 0SD_C12

Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...

Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul...

Error while activating Trnasfer rules

I am getting the following error, while activating Infosource. Can you please help me identifying the solution
Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
Diagnosis
"ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or ...

Hi,
Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
1. Drop the Source System
2. Re-Create the Source System.
3. For other than PC Files, "Replicate the DataSources" in the Source System.
4. Try mapping the transfer rules / structure and activate it.
Also check the SAP Note no :147195
Hope this works.
Regards
Pavan Prakhya

Error while activating DTP : database returned a value containing an error

Hi ,
I am getting an error as "The database returned a value containing an error"
while activating the DTP. Can neone suggest any solution for this error .
The system is also not allowing to delete the DTP and giving the same error as above one .

Are you receiving a similar error as below from the log:
Creation of PSA /BIC/B0001995 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4DGGKC0NCCP394FEOOSQC68Y3
If yes then look into SAP Note 1145673 - Extracting from InfoProviders with navigation attributes. Application of this note should resolve the issue.

Hexadecimal Error while activating DSO

Hello Experts,
I'm getting following error while activating DSO. I tried ALL_CAPITAL, ALL_CAPITAL_HEXADECIMAL in RSKC. still i'm facing this problem anyone can suggest anything. Iam using BW3.x flow
Value "CC-5012 TRYPSIN/EDTA SOLUTION 100ML" (HEX 430043002D0035003000310032000A00540052005900500053) of characteristic 0CRM_ITDESC contains an error at position 8
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 8 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem.
Thanks
Ajay.D

Hi Ajay,
There are invalid characters at the specified position. Now you ahve 2 options:
1. Either edit the PSA manually and replace this invalid character
2. Use the Funvtion Module 'RSKC_CHAVL_CHECK' . Pass the data to it & get the invalid char replace it with space. This can be called in the filed level routine if the effected info object is identified .
Check out these threads:
Re: Problem with Characters that have a hexadecimal display between HEX00
Re: Invalid Characters issue
Regards
Raj

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

Similar Messages

Maybe you are looking for