Error while activating transfer structure and communication structure.

Hi all,
I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
I mean same datasource comming from two R/3 instances and connecting to one infosource.
<b>Maximum length of segment is 1000 characters, current length is 2567</b>
Please let me know.
thanks,
Sabrina.

Hi Sabrina...
there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
Anyway, it suggests:
"the transfer method in the transfer rules must be set to TRFC with ODS"
Hope it helps!
Bye,
Roberto

Similar Messages

  • Error while activating Transfer Structure

    Hi Expert,
    we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
    Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
    I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
    Regards,

    Hi Dubey,
    I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix  this.
    Thanks,
    Renu

  • Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

    Hi,
      I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
      1.  Transfer structure 0CUSTOMER_TEXT_BA does not exist and
      2.   Data element for TXTMD could not be created.
      Can you please suggest me how to resolve these issues ?

    did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

  • Error while activating transfer rules needs help.

    The error while activating 0FI_AP_6 transfer rules is listed below.
    ''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

    Hi
    The problem is with your data source replication.
    Activate your data source & replication too.
    Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
    If not so, Activate your transfer rule manually.
    Regadrs
    Saravanan.ar

  • Field mapping in transfer structure and communication structure

    Hi,
    I am able to see the mapping of BW field with R/3 field in the transfer structure.
    By the same time, in the communication structure the same BW field is there with out any mapping (Unmapped).
    Can any one advice what could be the problem. Thanks.
    Regards,
    Abhi.

    Hi Abhi
    In communication structure will not have any mapping, it is just the structure to communicate to Datatarget. Mapping between Source fields and BW fields is done at transfer rules and mapping btwn communication struture and Datatarget will be donein Update rules.
    Regards,
    Kiran.

  • Error while activating transfer rules

    Transfer method 'TRFC with PSA' is not supported by the source system
    Message no. RSAR508
    Diagnosis
    The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.

    Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
    If you still face this error even after changing Transfer method, check below thread.
    Transfer method 'TRFC with PSA' is not supported by the source system
    Edited by: koundinya karanam on May 22, 2008 12:47 PM

  • Error while activating transfer structure for 0MATERIAL_ATTR

    I am trying to activate the transfer rules of 0MATERIAL_ATTR, but when activating the process end with the following message:
    Error generating program
    Message no. RSAR245
    Diagnosis
    An error occurred in the program generation:
    Program / Template:   RSTMPL80
    Error code / Action: 6
    Row:        1,792
    Message:    The data object "P_S_COMM" has no component called
    I cannot activate the transfer rules of 0MATERIAL_ATTR and 0MATERIAL_TEXT because of the same problem. Could anyone please help me...
    Thanks in advance for your valuable help.
    Regards
    Carlos España.

    Ron Silberstein:
    I really appreciate your help, thank you very much.
    I saw your profile, and i saw that you are an expert in BI.
    Congratulations, your help was very important for me.
    CONTINUE HELPING OTHER PEOPLE!!!!! T H A N K S!!
    God Bless you.
    Regards
    Carlos España.

  • Difference between transfer structure and extraction structure?

    Hi Gurus,
    Structurally what is the difference between transfer structure and extraction structure?
    I have observed that both these structures have the same fields.
    Then why do we need two structures in source system?
    Please clarify ...
    Thanks in advance

    These links describe the differences between the two.
    Transfer structure:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62b2e07211d2acb80000e829fbfe/content.htm
    Extraction structure:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a627ee07211d2acb80000e829fbfe/content.htm

  • Run time error while activating the Transfer Rules

    Hi,
    Error when activating Transfer rules for Infosource :
    0FI_GL_1 -
    (General ledger: Transaction figures)
    Run time error : ASSERTION FAILED
    Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
    Thanks,
    Kishore

    Hi,
    As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
    It is always better to import the latest patches avialble in service market to avoid this type of problems.
    Also see tha note 1010672 amd check whether it is applicable to your problem.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

  • Error while activating Trnasfer rules

    I am getting the following error, while activating Infosource. Can you please help me identifying the solution
    Syntax error in GP_ERR_RSAPTM2_____________, row 43 (-> long text)
    Diagnosis
    "ZOXID30058" must be a flat structure. You cannot use internal tables, strings,references, or    ...

    Hi,
    Usually this occurs when even the SOURCE SYSTEM is not configured properly. Recently I had the same issue. If the source system is newly configured, meaning other tran structures / rules are working fine then don't go over this process.
    1. Drop the Source System
    2. Re-Create the Source System.
    3. For other than PC Files, "Replicate the DataSources" in the Source System.
    4. Try mapping the transfer rules / structure and activate it.
    Also check the SAP Note no :147195
    Hope this works.
    Regards
    Pavan Prakhya

  • Error while activating update rule in Inventory

    I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
    Recieved an error while activating update rule  0RT_C17 2LIS_03_BF in Inventory module.
    When I checked the routine ,it shows the following error.
    Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
    I am not usre how to resolve this.
    Kindly reply asap.

    1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
    2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
    3. Then try to migrate you datasource and activate you update rules.
    it may help you
    Regards.
    Rambabu

  • Error while activating the Master Data InfoSource for attributes

    Hai
    Im trying to load the attributes for master data characteristics .
    I created the InfoSource and when im trying to activate it .
      Then it gives the following error like below
    Diagnosis
    An error occurred in the program generation:
    Program / Template:   RSTMPL80
    Error code / Action: 6
    Row:        505
    Message:    The data object "P_S_COMM" has no component called
    Procedure
    If the problem occurred during the data load or transport, activate the transfer rule.
    If the problem persists, search in the SAP note system under 'RSAR 245'
    So please tell the what is the error and how to resolve this issue.
    And pls give the error 'RSAR 245' message from SAP note system.
    I will assign the points
    bye
    rizwan

    hi Rizwan,
    check if helps Note 602318 - RSAR 245 error analysis with RSTMPL80
    Summary
    Symptom
    The process of generating transfer rules or loading data terminates with error RSAR 245.
    The long text for error message RSAR 245 indicates the cause of the generation error.
    1. Error code: 6
    a) Message: The P_S_COMM data object has no component
    This is very likely to be due to an 'obsolete' communication structure.
    b) Message: <table name> is already declared.
    c) Other messages
    2. Error code: 7
    Other terms
    RSAR245, RSAR 245, activate transfer structure, monitor, request
    Solution
    1. Error code: 6
    a) 'Obsolete' communication structure:
                Due to an optimization algorithm, pressing the 'Generating button' does not have any affect on the communication structure. Therefore, use the following workaround:
    Select 'Communication structure' -> 'Change'.
    Add any InfoObject (for example, '0MATERIAL') to the communication structure -> 'ENTER'.
    Communication structure ---> 'Save'
    Selet the InfoObject you inserted and delete it.
    Communication structure ---> 'Save'
    Communication structure -> 'Generate'.
    a) Message: <table name> is already declared. Check whether the local part of your routines contains TABLE statements. TABLE statements always have global validity and should therefore be in the global part of the routine.
    b) If the error occurs when data is being loaded, the transfer rule should be generated using RSA1.
    In many cases, generating transfer rules using RSA1 results in a detailed error message.
    2. Error code:
               Program to be generated is locked by parallel process.
    This error can sporadically occur if parallel processes simultaneously try to generate the same program.
    Unfortunately, you cannot completely prevent the error from occurring since these types of lock situations can still crop up during data loading in parallel processes. We are currently working on improving system stability relating to lock situations during the load task.
    Reloading usually works without any problems.

  • Error while activating transformation  ----   Message no. RSTRAN510

    Hi,
    while I am Extrating Data From Flat File I encountered this Error.
    I am working on <b>ECC 6.0 , BI 7.0.</b>
    I am trying this one in IDES, it is newly installed server.
    For Flat File Extraction I follwed the Steps
    1) I created Data source -
    let us assume I have created a Flat File with 3 fields
    SNO SNAME MARKS
    File is located in workstation
    Data source created successfull , I have checked in preview.
    2) I have created 2 key Figures, 1 characteristic
    3) I have created Infocube
    <b>here I have some doubt</b>
    while I am creating Infocube, the look and Feel is very different to 3.XX
    when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
    when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
    I created Like this
    select
    Info Area -
    > create Info cube   -
    given name of the cube and create (F5).
    the Info cube window displayed on the Right side
    Then I did like this
    select
    key Figures -
    > Info object Direct Input   
    Then I inserted my two key figures SNO,MARKS
    --- continue (F5)
    Dimension 1 -
    >  Info object Direct Input    
    I inserted the 1 char  SNAME
    --- continue (F5)
    Then I saved the Info cube
    Info cube saved successfull and activated successfull
    <b>Is it Right way For create InfoCube ?</b>
    4) I created Transfomation for the Data source
    Data source -
    > create Transfomation
    I have given
    Object Type  : InfoCube
    Name           :YSTU    - i selected which I already created.
    It automaticall taken these parameters
    Obejct Type     : DataSource
    Data source     : YSTU
    source system :PC_FILE
    create Transformation (Enter)
    I got the Error
    <b>Cannot generate proposal</b>
    <b>Message no. RSTRAN017</b>
    Then I try to activate, I got the Error.
    <b>Error while activating transformation</b>
    <b>Message no. RSTRAN510</b>
    Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
    I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
    I did mistake any where.
    Help me to Find the solution...
    sure you can get the points
    Thanks
    prasanna

    Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
    and i created Info Package too for the Data source , created successfully.
    I am struck on Final step  <b>creating DTP</b>
    when I am creating DTP
    Data Transfer Proc  : here I need to give the Dtp name ex: YDTP
    DTP Type               : Standard (Can be sheduled)
    Target of DTP
    <b>Object Type</b>       : Info cube
    <b>Name </b>               : YSTU  (This is my Cube Name)
    Source of DTP
    <b>Object Type</b>     : Data source  (It automatically Taken)
    <b>Data source</b>     : This is Disabled
    <b>Source system</b>:  This is Disabled
    continue (Enter)
    I got the message ?
    <b>Specify Name of source</b>
    and courser is in <b>Data Transfer Proc </b>
    Thanks
    prasanna

  • Error while activating DSO

    Hi,
            I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
    "Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
    Message no. BRAIN290
    Diagnosis
    Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
    Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
    Procedure
    Check the origin of the characteristic value. If possible, change the characteristic value in the source.
    Incorrect source text in update routines and transfer routines can also cause this problem."
    Any thoughts how I should correct/

    Hi Tanu,
    this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
    Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
    Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
    This should correct the issue.
    regards,
    Naveen.A

  • Error while activating DTP in BI 7.0

    I am facing an error while activating DTP between a ODS and CUBE.
    I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
    "Creation of PSA /BIC/B0000XXX failed.
    Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
    Error when activating Data Transfer Process DTP_<Request Number>"
    I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
    Any pointers on the same would be of great help.

    Hi Rupesh,
    Chk these links they may help you
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
    Regards,
    RK

Maybe you are looking for