Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
Srinath
Hi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani..
Similar Messages
-
Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
ThanksWhile we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
-
Hello,
While trying to update Adobe Reader XI 10.0.06 to 10.0.07 on my laptop running W7 Home Premium x 64, I get error message 2203. The same occurs if I try to uninstall before manually install the new version. Can you please help?
PS.- Thank you very much for your Support in trying to solve a problem created by yourselves.
Message was edited by: Juan VeranoIs there anything else beside the number 2203?
Try removing the current Reader using http://labs.adobe.com/downloads/acrobatcleaner.html, then install 11.0.07 from http://get.adobe.com/reader/enterprise/ -
HT201210 i keep getting errors while i try to restore my iphone. can you please help?
Hello. I wanted to restore my iphone but i keep getting errors while i'm at it. 1015 and some others. It is still in recovery mode and i cannot seem to solve anything. Can you please help? I have an iphone 3G which used to work on iOS 4.2.1. Thanks
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?
I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages. -
Hi, i'm trying to update my iphone but this is the msg i'm getting, can you please help me. thank you. "the iphone ''C & M '' could not be restored. An unknown error occurred (3194)"
http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue. -
Hi, I getting a "playback error message" on youtube App. I tried to reinstall the app and to reset and restore the device and all these things didn't help.can you please help me
That's a peculiar one to get in the context of a QuickTime uninstall.
Which particular version of QuickTime for Windows are you currently running? (7.7.5, 7.7.4, something earlier?) -
HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastavHi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish -
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM -
Error while activating transformation in BI 7.0
HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
SheelaHi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K -
Hi
I turned on my laptop this evening to import a new cd but it asked me if i wanted to download the new version of itunes so i went ahead to update it but it failed to update then it failed to open at all, and and runtime error keeps popping up but when i uninstalled it to reinstall it it wont install now and i cant use my ipod or ipad with my laptop without itunes and i never had this problem at all. can you please help?Hey maryncomiskey,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. The following resource may help to resolve your issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Thanks,
Matt M. -
Can you please help me how resolved this issue.
Hi Experts
I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
LDAPRC 010 another server is referenced.
Can you please help me how resolved this issue.
With Regards,
Trinadh BokkaYou may be able to solve by using
Note 1151329 - Depth of LDAP search is only one level below the base entry
Markus -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek
Maybe you are looking for
-
Executing procedures concurrently
Hello All, I am trying to execute the following procedure and got the errors...can anybody please help me out 1 CREATE OR REPLACE PACKAGE BODY SCOTT.PKG_TRY_PAR IS 2 PROCEDURE try_par(num1 IN NUMBER, num2 IN NUMBER) is 3 begin 4 for i in num1..num2 l
-
Sub query results use in main query.
I need to query a specific parameter in one table called parameter_id which will return a list of location id's. Utilizing those i then need to query another table for the max(date_time) values in another table. Select LOCATION_ID FROM TABLE1 WHERE
-
Consuming a web service in Oracle9i with JAX-RPC calling
Hello, i need to generate web service client in oracle9i db using jpublisher. And i found in this tutorial http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm that Oracle 9i is not supporting JAX-RPC web services callin
-
IMessage Error involving a large iMessage that i received
One of my friends sent me a lot of emojis on iMessage and now iMessage doesn't work. When i open the app it looks like i have no messages but its completely frozen. I wait one minute or so and then the app crashes. No matter what i do i cant fix it.
-
I don't see an "eject" or "Safely discdonnect" button.when trying to disconnect iPad 2 using iOS 5.1.1. from iTunes 11.2.