Error while activating Windows 8 Pro using MSDN Key

I installed Windows 8 Pro on my machine with a key from my friend. Now, I've got my own MSDN key for Windows 8 Pro edition. When I try to change the product key using powershell, I get the following error,
Error: 0xC004F069 On a Computer running Microsoft Windows non-code edition, run slui.exe 0x2a 0xC004F069 to display the error text.
tech trends

Similar Messages

Error while activating cube contains non cumulative key figures

Hi all,
when i am trying to activate a cube which contains non cumulative key figure it is showing out the following error:
DDIC Object TABL /BIC/LZATTR1NON has not been activated
Table /BIC/LZATTR1NON could not be activated
Please let me know if any one come across with such error
Help are appreciated

Before activating an infocube with non-cumulative keyfigures, the system
design forces the user to enter at least once the screen: maintain
non-cumulative values (validity table). If that step has been performed, activation will work fine.
In the meantime, please do this step explicitly, at least once, when
configuring such an infocube, then you should not have any problem.
Please follow the same process while activating the infocube
Goto Infocube ->Goto Change mode->Menu ->Extra-> goto the screen:
maintain non-cumulative values once.
Walter Oliveira.

Error while Activating Inventory record in WM

Hi All,
I am getting an error while activating Inventory record using LI02N ,The Inventory record has been created using LICC Cycle Inventory at Quant Level.The error detrails are as below:
Message Text:
Function code cannot be selected
Technical Data
Message type__________ A (Cancel)
Message class_________ BL (Application Log)
Message number________ 001
Message variable 1____ Function code cannot be selected
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 4 (Additional information)
Sort criterion________
Number________________
Thanks you all in Advance.
Regards,
NVK

I am encountering a similar error whils tryng to create or display WM Physical Inventory documents.
Tx: LX16 - Error Message no. BL001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Tx: LI01N and LI03N u2013 Error Message no. L4001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Errors when trying to create or display PIs, but can run reports on u201CWH1u201D and configuration looks ok?
I cannot find anthing n SAP OSS for WM.
Any assistance would be appreciated.

How to upgrade windows 8.1 to Pro using VLSC key?

hi,
How to upgrade windows 8.1 to Pro using VLSC key?
Will this work like a pro pack?
Thanks

Hi MGerio,
Are you going to upgrade several Windows 8.1 machines to Pro with VLSC key ?
It is recommended to ask for help from our
Volume Licensing Service Center. They will offer much more help for you .
Welcome to the Volume Licensing Service Center
https://www.microsoft.com/Licensing/servicecenter/default.aspx
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error while activating transformation ----   Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube   -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name           :YSTU    - i selected which I already created.
It automaticall taken these parameters
Obejct Type     : DataSource
Data source     : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type               : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b>       : Info cube
<b>Name </b>               : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b>     : Data source (It automatically Taken)
<b>Data source</b>     : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna

Getting Runtime Error while Activating Characteristics in BW sandbox system

Hi, i m getting runtime error while activating Characteristics. Error as All InfoObjects Already Saved(locked)
Short Text
SQL error 1691 occurred when accessing program "GP4H8Z73D1WOGH7XBIZ54N5GXEG "
Runtime Errors DBIF_REPO_SQL_ERROR
even if creating a new Characteristics same error is comming.
Key Figures are getting created successfully but problems is comming only with Characteristics. Please Help...
Edited by: kush kumar on Mar 23, 2010 11:56 AM

Hi,
Follow bellow steps:
a) Once check the Lock entries by useing SM13.
Goto SM13--> Select your object lock entries --> Select delete.
b). Acitvate the Infoobject.
Regards.

Error while raising a invoice using VF01

Hi,
I am getting an error while raising a invoice using VF01.
Error as follows
RV_MESSAGE_UPDATE
Update was terminated
System ID....   TIP
Client.......   300
User.....   user1
Transaction..   VF01
Update key...   E66E6454075548D8922BAC091E81F0CB
Generated....   18.07.2007, 18:57:38
Completed....   18.07.2007, 18:57:38
Error info...   TD 443: WRITE_FORM
Pls help
Points will be rewarded.
Thanks

Hi,
This is an ABAP short dump. If you go through the error log, there will be a section where in you can see > What caused the problem.
Try to analyze this log and you can find a solution. Probably, you can also check whether there is any OSS note with this error message.
Thanks
Murali.

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while activating DSO

Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/

Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A

Error while activating in 3.1H

Hi Guys,
I have an issue, I am copying a standard program for payment advice RFFOD__V into a Z-program ZRFOF__V and is working fine.
Now I have got another copy of RFFOD__V i.e. ZRFOD_B from a portugal system and now when I am try to copy the program ZRFOD_B from Portugal system to my system, I am getting some errors while activating stating that some data elements are not defined. The same data elements are used in the standard program RFFOD__V and is activating correctly, it is also working fine with ZRFOF__V, the problem only lies with ZRFOD_B.
Please note that I am using 3.1H system. Also please let me know how do you activate multiple programs together (i.e. a program and certain includes in 3.1H system).
Awaiting for your reply,
Thanks and Regards.
Mohammed.

Mohammed:
It's been a while since I used 3.1H, but when you go to activate your program, doesn't it give you a list of all inactive objects? If so, can't you highlight the program and all related includes and click on the green check mark to activate all programs at the same time?
.. Craig

Access dynamic attributes BPM; error while activating the process in sxi

hi everybody,
I have to access dynamic attributs in a BPM condition. I thought I could achive this when I click the radiobutton "contextobject" in the condition editor.
When using the value-help button on the contextobject a huge list of objects is shown for selection.
Strange to me is that also the radionbutton "interface-variable" is checked. I can not uncheck this radiobutton. But this makes the error while activating:
"Containerelement 'IDOC_'MyContainerelement'{XSDSIMPLE::xsd:string;SHeaderSUBJECT:ht' does not exist".
Has anybody expirience using the dynamic attributes/contextobjekts in BPM?
Thanks, Regards Mario

Hi all,
it seems to be impossible to access the attributes:
Technical Context Object in ccBPM
Regards Mario

Getting error while activating the template in sharepoint2013

Hi,
I am getting the following error while activating template in SharePoint-2013.
Please guide me on this.Thanks in advance.

can you provide error details from ULS logs using correlation Id
http://www.sharepoint-journey.com/powershell.html
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Error while activating update rule in Inventory

I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.

1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu

SAP HANA: Error while activating Graphical Calculation Views

Hello,
I am receiving the below error while activating a Graphical Calculation View.
I am getting this error lately. Not sure what is causing this because the calculation views worked just fine before.
It is failing at the Repository Activation step with the Activation ID 2146.
It says - Repository: Revalidation failed for at least one object.
MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="sflight/GC_AGENCY_REVENUE" schema="_SYS_BIC"><dataSources><tableDataSource name="SBOOK" schema="SFLIGHT" table="SBOOK"><attributes><allAttribute /></attributes></tableDataSource><tableDataSource name="STRAVELAG" schema="SFLIGHT" table="STRAVELAG"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><join name="Join_1" type="inner"><viewAttributes><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="MANDT" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="AGENCYNUM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="FORCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="LOCCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="NAME" /></viewAttributes><inputs><input name="SBOOK"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="FORCURAM" target="FORCURAM"/><mapping source="LOCCURAM" target="LOCCURAM"/></input><input name="STRAVELAG"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="NAME" target="NAME"/></input></inputs><joinAttributes><joinAttribute excludeFlag="false" name="MANDT" /><joinAttribute excludeFlag="false" name="AGENCYNUM" /></joinAttributes></join><aggregation name="finalAggregation" defaultViewFlag="true"><inputs><input name="Join_1"><mapping source="NAME" target="NAME"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="MANDT" target="MANDT"/><mapping source="LOCCURAM" target="LOCCURAM"/><mapping source="FORCURAM" target="FORCURAM"/></input></inputs><viewAttributes><viewAttribute name="NAME"/><viewAttribute name="AGENCYNUM"/><viewAttribute name="MANDT"/></viewAttributes><keyfigures><keyfigure name="LOCCURAM" aggregationType="sum"/><keyfigure name="FORCURAM" aggregationType="sum"/><keyfigure name="row.count" datatype="int" isVisible="false" aggregationType="count"/></keyfigures><calculationNodeHints countStarAttribute="row.count"/></aggregation></calculationViews></calculationScenario></cubeSchema>nVersion: 33n
I am using the SFLIGHT schema which is provided by SAP.
Any pointer is appreciated.

Hi Murali
I met the exactly same issue when I try to activate a graphical calculation views.
I created a new user in HANA db, then create a simple graphical calculation view(just from one table from this user). It doesn't work. All attribute views work fine. There's no related column view under _sys_bic.
HANA database version is 1.00.31 runs on HP DL580 512GB. And here's the error message -
"MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="co-pc-river/CALC_TEST1" schema="_SYS_BIC"><dataSources><tableDataSource name="JEST" schema="GLR" table="JEST"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><projection name="finalProjection" defaultViewFlag="true"><inputs><input name="JEST"><mapping source="MANDT" target="MANDT"/><mapping source="OBJNR" target="OBJNR"/><mapping source="STAT" target="STAT"/><mapping source="INACT" target="INACT"/></input></inputs><viewAttributes><viewAttribute name="MANDT"/><viewAttribute name="OBJNR"/><viewAttribute name="STAT"/><viewAttribute name="INACT"/></viewAttributes></projection></calculationViews></calculationScenario></cubeSchema>nVersion: 64n"
Best Regards
Mao Mingqi

Error while activating Windows 8 Pro using MSDN Key

Similar Messages

Maybe you are looking for