Error while activation of Bi content of Bi cockpit

Hi all,
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I have applied the sap note 1110642 , 1110641 . also ran the program RSSM_SHIPDVERS_CLEANUP but did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
Akash

Akash you may be wrong.
When I tried to install Technical content in my BW system, I faced the same problem what you have mentioned.
What the system does in such cases is gathers certain system specific informations from teh connected sources. In my case, it tried to install teh datasources to the APO system & the CRM system.
However I unchecked the option while installing from Business Content for these two systems and rest went on fine.
Myself source system was perfectly ok and the DS got installed correctly on BW.
So please check if the error is for other Source Systems.
Regards
Anujit Ghosh
Edited by: Anujit Ghosh on Jul 23, 2008 2:03 PM
While installing from Business Content, do one by one(first InfoProviders, then DataSources etc) using the following help
http://help.sap.com/saphelp_nw70/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
You will find a list of all the related objects here.

Similar Messages

ERROR while activating the Business Content of Sales Cube 0SD_C03

Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.

Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar.

Error while activating standard business contents e.g : 0SD_C11, 0SD_C12

Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...

Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul...

Error while activating PM Business Content DSO 0PM_DS01

I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
Abhishek

Hi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar

Error while activating the business content object

Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
Thanks

Thanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks

Error while activating the Business Content

Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.S

And also check whether there are any dumps in ST22.
Khaja

Error while activating TCT and BI admin. Cockpit (Urgent)

Hi Experts,
We are configuring NW 04s BI system right now. We have followed the general settings on the system after Basis handed that over to us accrding to Best Practice config. document. Now to install BI administration cockpit, we need to activate the technical content for executing the BI Admin. cockpit. First of all, when we tried to install technical content automatically, we got this error msg no. RSTCO_UT013 and in our 2nd trial we are getting err msg no RSQBW400. First msg was about the job BI_TCO_ACTIVATION failure. Second msg is " There is no A version of Infoset 0RSTT_I07. Because of the errors, we are not able to install any standard business content. Every time we run a background job, it gets cancelled.
We are applying the OSS notes no. 965386 and 934484. If any one has any idea of resolving the issue plz. let us know. Full points will be awarded for the correct answers. Thanks 

Hi All,
This is best practice in activating BI Statistics and Admin Cockpit.
BI Administration Cockpit and new BI Statistics Content in SAP NetWeaver 2004s - Webinar Details
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
I recomend to use BI CONT 703 SP5.
If not, you need do manual correction and apply more than 50 notes.

Error in transfer structure while activating the business content

Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.

Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Error while activating DTP in BI 7.0

I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.

Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK

SOAP Framework error while activating interactive form in SFP

hi everyone,
I am new to adobe forms, I got an error while activating interactive form
SOAP Framework error: SOAP Runtime Exception: CSOAPExceptionTransport: HTTP response contains unexpected content-type(100,101).
I am unable to trace this error, can anyone plz let me understand for what reason this error occurs.
Thanks in advance.
- Aditya

Its an issue with ADS installation or configuration. Let your BASIS team know about this error with screen print. We had same issue and BASIS fixed it.
Raja

Error during activation of business content

Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!

Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance!

Error while activating a routine "no object list"

hi
I am getting a error while activating a routine Rv50c601
"There is no object list for INCLUDEs" Please suggest on the error and resoulution
regards
Nishant

Try running program RV80HGEN.
Regards,
Naiimesh Patel

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Error while activation of Bi content of Bi cockpit

Similar Messages

Maybe you are looking for