Error while activation of ODS Object.

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

don't post same issue twice. Bhanu working on your thread.
check this ...
Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Similar Messages

  • DBIF_RSQL_INVALID_RSQL Error while activating the ODS Object

    Hello BW Friends,
    We have used the Extractor 2LIS_11_VAHDR and enhanced and coded the user exit to extract the data to the required field. Extractor is working fine and able to get the records but when we tried to schedule a data load in BW the request was shown green in the ODS and when saw it in monitor it is still yellow and zero in PSA and the processing hasn't completed. When i tried to activate it manually there is a short dump generated with this error, DBIF_RSQL_INVALID_RSQL. If any one of you has encountered same problem please let us know. Appreciate your prompt response on this.
    Regards,
    Rajesh

    Raj,
    I misunderstood your question.... check whether source system job is processing or not? what about any blocked TRFC'sin SM58.
    try to find root cause... ODS activation is not a problem... load is not finished you tried to acivate the request still in the process Yellow.
    try to check in Monitor details tab page messages...
    All the best.
    Regards,
    Nagesh Ganisetti.
    Message was edited by: Nagesh Ganisetti
    Message was edited by: Nagesh Ganisetti

  • Error while activation the Datastore Object

    Hi folks,
    I am in SAP BASIS, so not aware of BI very much...can u help me in this,
    One user is getting error while activation the Datastore Object
    below is error log,
    (Green) Activation of Objects with Type DataStore Object
    (Green) Checking Objects with Type DataStore Object
    (Green) Checking DataStore Object DSO_TEST
    (Green) DataStore object DSO_TEST is consistent
    Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
    Change log for DataStore object "DSO_TEST" saved successfully
    Writing of object catalog entries (TADIR)
    (RED) The creation of the export DataSource failed
    (RED) Error during the retrieval of the logon data stored in secure storage
    (RED) Error when creating the export DataSource and dependent Objects
    (RED) Error when activating DataStore Object DSO_TEST
    Thx. in advance
    Yash

    Hi Yash,
    Check out the below thread:
    [activation of the Datastore Object.|error in ODS activation/export datasource;
    Hope it helps you!
    Please reward points if helpful
    Manish

  • Error while activating 0FIGL_O02 ODS

    Hi ,
    It showing error while activating 0FIGL_O02 ODS .I have already allowed all special character "ALL_CAPITAL,.<>?/:;"{}[]||=-)(*&^%$#@!~`"'-_,ALL_CAPITAL_PLUS_HEX",but it's still showing error in particular field  0DOC_HD_TXT .
    Errror:Value 'AMITBHANDARKAR          ' (hex. '41004D00490054004200480041004E004400410052004B0041
    Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
    What is the error in this name.

    Hi rajesh ,
    While activation and creating the SIDs the system will perform the sanity check which will ensure to throgh th error if u trying to load some lower cse letter to IO which doent have the u lowercase check box as checked. You can edit the IO then and also proceed with saveen suggested by processing all capital.
    Thanks,
    Deepak

  • Error while activating the ods ( prod.issue)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    <b>Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.</b>
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi Rakesh
    The error message
    "Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
    Please check your ODS settings, if 'Unique Data Records' is checked or not.
    Sorry for my late response!
    Regards
    GSK

  • Error while activating the ODS

    Dear Experts,
    Please help me out,
    I am facing one problem while activating the ODS of 0FIGL. Data is uploaded successfully into the ODS but while activeting the ODS, it gives the following error message :
    Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0DOC_HD_TXT
    Value 'SWITCH 24 PORT MANAGED -I' (hex. '00530057004900540043004800200032003400200050004F00') of characteristic 0DOC_HD_TXT
    SID determination finished for InfoObject 0DOC_HD_TXT
    I have also read out all the related post & also applied them in this but still the position is same.
    also in RSKC, all the characters are allowed.
    please suggest.
    Thanks in advance
    Neha
    Process 000090 returned with errors

    Hi,
    Pliz go thru below article for restricting Invalid chars.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
    It might give u an idea or solve your issue.
    Thanks,
    Jitender.

  • Error while activating the ODS (high priority ticket)

    Hi BW guru's
    I am facing major issue while activating the ods i am getting this below error.
    Request REQU.....,data package 000002incorrect with status 5
    Request REQU.....,data package 000001 incorrect with status 5.
    If any1 has come across this issue pls help me out .
    I will reward the points surely.
    Cheers,
    Rakesh

    Hi,
    ODS activation error
    Re: ODS Activation Failed with Status 5
    ODS activation is failing with  incorrect with status 5 erro
    Re: Error Activating the ODS data
    ODS Activation error
    Regards,
    San!

  • Error while activating the info object.

    Hi,
    While activating one of the info objects, i am getting the following error message:
    Characteristic 0BP_GRP: Cannot switch off InfoProvider property
    Message no. R7B289
    Diagnosis
    The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
    Procedure
    If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
    Thanks and Regards
    Niren.

    Hi Niren,
    Check the below thread..
    Howto Remove 0Employee Char from my InfoArea
    Hope it helps..
    Regards,
    Ramki.

  • Data Laoded successfully, giving error while activating the ODS

    Hi,
    Process Chain is running daily for  loading and activating the data into the ODS.
    Today the data loaded successfully but the data is not getting activation. I then tried to activate the data manually but still it not trying to get activated.
    I check it the Status tab, it is also giving the same Procedure to activate the data manually.
    I checked in the Details Tab. It is displaying Errors as :
    1. Error getting SID for ODS.
    2. Task 0049 for parallel SID assignments terminated with errors.
    3. Activation of data records from ODS terminated.
    4. System error occured (RFC call)
    Please any one help in this issue.
    Thanks & Regards
    Jagannadha Raju

    Hi,
    This is probably because you loaded transaction data before master data and tried activating it.Load the relevant master data, perform the change run and retrigger activation.
    It should work.
    Else there is a workaround. You can try editing out/blanking out those values in PSA and loading and activating. This will work.
    Also try repairing the ODS object in RSRV.
    When you activate multiple requests tick the activate serially check box.
    thanks,
    JituK

  • Error while activating the ODS "Request No longer Exist in ODS".

    Hi All,
    I had deleted one request from four ODS's before completely loaded from R/3. Now when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
    But when i am manually activating this it is not giving me any error.
    Please suggest solution for the same.
    Regards,
    Rohan Shah

    I had deleted one request from four ODS's before completely loaded from R/3.
    Before deleting the request make QM status red and then delete.
    when i am trying to activate from one of them using process chain it is giving me the error massage "Request No longer Exist in ODS".
    Already you have deleted the request. How can you activate the same request?
    Have you loaded the data again?
    With Regards,
    Kishore.
    Edited by: Siv Kishore on Apr 22, 2009 3:58 PM

  • Error while activating Data Store Object

    Hi Guru's,
    When I try to activate a data store object i get the error message :
         The creation of the export DataSource failed     
         No authorization to logon as trusted sys tem (Trusted RC=2).     
         No authorization to logon as trusted sys tem (Trusted RC=2).     
         Error when creating the export DataSource and dependent      Program ID 4SYPYCOPQ94IXEGA3739L803Z retrieved for DataStore object ZODS_PRA

    Hi,
    you are facing a issue with your source system 'myself', check and repair it. Also check if the communication user (normally ALEREMOTE) has all permissions needed.
    kind regards
    Siggi

  • Error while activating ABAP proxy object

    Hello,
    I can see all the interfaces of PI7.0 in my ECC6.0 system.
    I am able to create abap proxy object of a interface.
    But when I try to activate that I am getting error as
    "RFC system error for destination GTADIR_SERVER".
    Pl can you suggest. appreciate quick help in this.
    thanks in advance,
    Sharada

    Hi,
    For more details take a look at note:  [1063482 - Creating Dictionary objects - RFC error GTADIR_SERVER|https://service.sap.com/sap/support/notes/1063482]
    It is written that: Message SGSUB 104 is not an error message, but is merely irrelevant information for customers. You can continue to create objects nevertheless.
    To get rid of this annoying error you have to implement the corresponding  support package.
    Regards,
    Jakub

  • Error while Activating all the objects?

    Hi Ravi,
    two suggestions:
    1) Delete and import new without automatic generating (a-d)
    2) Fill in dummy values in a-d; then activate change list, then delete a-d
    Regards Mario

    Hi,
    The follwing are the standard adapter created:
    <i>a. GeneratedReceiverChannel_HTTP
    b. GeneratedReceiverChannel_IDOC
    c. GeneratedReceiverChannel_RFC
    d. GeneratedReceiverChannel_XI</i>
    If you are not using the above adapters and have not updated them with allt he paramters. You should delete them and then change the activating list.
    Regards
    Vijaya

  • Error while activating multiple requests in ODS.

    Hi All,
    I get a "ORA-12801:  unable to extend temp segment" error while activating an ODS. The problem is I selected 7 requests for activation and my Basis guy tells me he cannot add any more files to the temp tablespace.
    I guess the solution would be to re-activate one request at a time. However now the dependency has been enforced between the requests and I cannot activate a single without selecting the other requests.
    I even, subsequently, selected "Do not condense option..." AND the "Process Request serially" options. I get the same error.
    Is there a ABAP report that can turn off this inter request dependency ?
    Thanks.
    Dorothy.

    Thank you for the quick reply !
    Dinesh: I looked at the note. It applies to oracle systems < 9.2.0.6. We are at 9.2.0.6. The paramter  COMPNOMERGE is missing in RSADMIN table. The note however is right on the money for the problem I am experiencing.
    Bhanu: I applied your suggestion. The test yielded no errors.

  • Error While activating 0Material(BI7)

    Dear Gurus,
                     I am trying to Activate 0Material Infoobject after deleting a Navigation attribute(Classification characteristics) ,the system throws a error " Error while activating Type Info object".And when i navigated to the Detailed error message it says " error : Internal Activation(info object) - error while converting master data tables .Can anyone help me out with this.
    manythanks
    arun

    Dear gurus,
                     We posted the error message to SAP and they have replied " while we deleted the attributes from the Info object(0material) it broke the D-Version of the Object and so to Transport the Info object from another Working system to the Problem(Dev)system ,Install and then activate".
    1). Does it mean we can install them object in PRODUCTION Server and then transport to the Development.???
    2). Now i tried installing 0Material in RSORBCT in Produciton,but gets a message "Cant make any changes in the repository-changes in this client prohibited".  Guys could u help us with this??
    manythanks
    arun

Maybe you are looking for