Error while activationg transformations
Hi Experts,
When I'm trying to activate the transformations in BI for Asset accounting cube 0FIAA_C12.
its showing following
Internal error: 24 0CHRT_ACCTS 01 Standard Group MASTER - Contact SAP
Message no. RSTRAN000.
please help me out.
chaitu
If u r using any routine..check the following
https://forums.sdn.sap.com/post!reply.jspa?threadID=1209048
Else
https://forums.sdn.sap.com/post!reply.jspa?threadID=877639
Re: Update Rule Migration from ODS to Cube --Error
Go to Rule Details (double-click rule)
Change Rule Type to Direct Assignment
Transfer Values
Go back to Rule Details
Change Rule Type back to Read Master Data
Transfer Values
Activate Transformation
Similar Messages
-
Error while activating transformation ---- Message no. RSTRAN510
Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on <b>ECC 6.0 , BI 7.0.</b>
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
<b>here I have some doubt</b>
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
<b>Is it Right way For create InfoCube ?</b>
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
<b>Cannot generate proposal</b>
<b>Message no. RSTRAN017</b>
Then I try to activate, I got the Error.
<b>Error while activating transformation</b>
<b>Message no. RSTRAN510</b>
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like <b>Basis Guy need to install any Patch</b> or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasannaThank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step <b>creating DTP</b>
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
<b>Object Type</b> : Info cube
<b>Name </b> : YSTU (This is my Cube Name)
Source of DTP
<b>Object Type</b> : Data source (It automatically Taken)
<b>Data source</b> : This is Disabled
<b>Source system</b>: This is Disabled
continue (Enter)
I got the message ?
<b>Specify Name of source</b>
and courser is in <b>Data Transfer Proc </b>
Thanks
prasanna -
Error while activating Transformations
Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.Hi,
Map it with required Unit filed from your Source .
Mayank -
Error while activating transformation
Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
Message Number. RSAA561
2. Error while activating transformation
Message Number. RSTRAN510
3. Error activating transformation.
Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh KaranMight be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay -
Error while activating Transformation CO_OM_WBS_3
Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
SunderDear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM -
Error While Transporting Transformation
Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa -
Error while activating transformation in BI 7.0
HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
SheelaHi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K -
Error while activating transformations? can you please help me
Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
SrinathHi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani.. -
Error while actvating Transformation
Gurus,
I've changed a DSO, i.e., added new InfoObjects . All the fields are mapped properly.
When I'm actvating transformation - its giving me error messages
- Error while activating transformation - RSTRAN510
- Error when writing routines - RSAA561
- Error when activating Transformation 0KC0IK6EYKKG22LW9MN80OV6H9RUZWNR - RSO404
I tried the following:
1. Tried actvating the Transformation after deleting data from DSO.
2. Tried logging off /nrsal and performed Actvation.
To Update:
1. There is no start routine and end routine written for this DSO.
Can anybody help me in fixing this problem.
Regards,
YaseenHi,
InfoObjects: Deleting temporal hierarchy join in target syst, or due to deleting routines or even you can get this msg when you had not assigened the Units.
Go though the below SAP Notes and link for your reference...
[/message/1410802#1410802 [original link is broken];
apply the SAP Notes
SAP Note Number: 1100975
SAP Note Number: 979487
if you had resoved the issue...do let me know the approach...
regards,
NR -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek -
Error while transporting Transformation: Syntax error in Start Routine
Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
RamHi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package). -
Error while creating transformation in BI
Hi Experts,
Could you please help me in sloving the below two points in BI.
1. While creating transformation from Data source to infosource in BI, it was throwing error 'Active version of emulated 3.x DataSource XXXXXXX cannot be displayed'. The source system here is another BW 3.5 system. Please help how to create transformation for this.
2. While adding no-cumulative key figure to infosource it gave error ' non-cumulative key figures can't be added to infosource'. Is there any way to add these type key figures to infosource.
Could you please give solution for the above.
Thanks
Konda ReddyHi,
Check the DataSource is in which version, i mean is it in 3.x or 7. Because we can create the transformations if and only if the DataSource is in 7 version. If it is in 3.x, it will allow u to create Transfer rules. So first migrate the DataSource form 3.x to 7 suing tcode RSDS.
Non-cumulative keyfigures are loaded directly from datasource to data target. System not allows u to maintain at InfoSource level ( I am not sure about this, confirm once).
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy -
Error while creating transformations
Hi,
I am new to BI 7.0, i m getting error while i creating transformations on my cube. i am loading flat file and my file structure is
Sales ord
Customer
Price
Calday
I have assigned the price as Fixed currecy to 'USD'
i`don't think we have to add the currency field in flat file structure
i m getting the following error
Rule 4 (target field: ZRA_PRICE): Field NETPRICE must be assigned to an InfoObject
Rule (target field: ZRA_PRICE): No source unit assigned
pls suggest
Regards,
Suri+Rule 4 (target field: ZRA_PRICE): Field NETPRICE must be assigned to an InfoObject+
Check if you have Direct Assignment set up after the mapping.
RClick - Rule Details - Direct Assignment - Have it mapped.
Rule (target field: ZRA_PRICE): No source unit assigned
How did you define ZRA_PRICE, with currency USD or 0LOC_CURRCY or ??
Just recheck ...and have the 0CURRENCY set to constant to USD in the Target...it need not exist in the Source. -
Error while activating Transformation RSO404
Hi All,
When i am activating a transformation i am getting this error. The transformation was not getting active. Can u please let me know why it was happening. There are no syntax errors in the routine or in the start routine.
regards,
mahesh.Hi Jin,
I also checked that one but it was not showing any errors. Why i got this problem is we have a start routine in this one when i am loading data into that it was getting an error that there was a problem in start routine.
So, what i have done i commented the start routine and again activated the transformation it thrown an error. again i uncommented the start routine and start doing activation it was throwing the same error. Can u please reply if u can understand my question or not.
regards,
mahesh. -
Errors While Transporting Transformations and DTPs
Hi Experts,
Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages. Does anyone know whatu2019s happening and how I can fix this?
Thanks,
Janice
The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
Transformations:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4
No rule exists
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Message no. RSTRAN802
No rule exists
Message no. RSTRAN514
DTPs:
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...
Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...
Activation of Objects with Type Data Transfer Process
Saving Objects with Type Data Transfer Process
Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Message no. RSO843Thanks so much everyone for your suggestions. Iu2019ve tried them all and hereu2019s what I now have:
Anil u2013 Active datasources were included in the original transport. I tried retransporting and got the same error messages.
Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource. I replicated it as a 70 datasource in D and this is what was transported to Q. It is a 7.0 datasource in Q. I got the same error messages when I tried transporting just the transformations.
Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages. I tried retransporting with a new transport request and it failed with the same error messages.
Is there anything else anyone can think of?
Thanks,
Janice
Maybe you are looking for
-
Help in enhancing CRM logon function module
Hello all, We have a situation where in the past we have allowed the creation of multiple Business Partners sharing the same e-mail address. We are about to close this loophole but we have this as a master data issue for some existing Customers/Busin
-
Changing file classification after importing
I've got loads of CDs that contain spoken word and radio plays. When I imported them, the contents were automatically classified as individual songs and put in my Music library. Any way to have them reclassified as Audiobooks? I'd also like to have i
-
How to List User Permissions in CMC XI 3.1?
Hi, Could anyone please let me know that how can we list all users with what permissons they have in CMC XI3.1? Regards Ranjith
-
Mac Book Pro i7 late 2011 Running Slow after installing Mountain Lion
Hi All, Is anyone else experiencing the same issues, since I have updated to Mountain Lion last week my mac is now running alot slower than before on startup, closing down and when opening and shutting programs / apps. Would it pay me to upgrade to 8
-
How to insert from Lob into blob