Error While Adding Node on RAC

Hi Friends,
Environment:SUN Solris 10
Cluster Version:10.2.0.3
database Version:10.2.0.3.0
Due to H/W failure one of our RAC node(prod1) got formatted.
We have deleted the node(prod1) from RAC successfully.
Following the below link..
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/adddelunix.htm#BEIBBADI
But When i am again trying to add the node i am facing the below issue..
while doing Adding an Oracle Clusterware Home to a New Node Using OUI in Interactive Mode
1.Ensure that you have successfully installed Oracle Clusterware on at least one node in your cluster environment. To use these procedures as shown, your $CRS_HOME environment variable must identify your successfully installed Oracle Clusterware home.
2.Go to CRS_home/oui/bin and run the addNode.sh script.
3.The Oracle Universal Installer (OUI) displays the Node Selection Page on which you should select the node or nodes that you want to add and click Next.
4.Verify the entries that OUI displays on the Summary Page and click Next.
5.Run the rootaddNode.sh script from the CRS_home/install/ directory on the node from which you are running OUI.
6.Run the orainstRoot.sh script on the new node if OUI prompts you to do so.when i am doing the step 6 on the new node, i am facing the below error..
bash-3.00# /software/oracle/oraInventory/orainstRoot.sh
Changing permissions of /software/oracle/oraInventory to 770.
Changing groupname of /software/oracle/oraInventory to oinstall.
The execution of the script is complete
bash-3.00# /software/oracle/product/crs/root.sh
WARNING: directory '/software/oracle/product' is not owned by root
WARNING: directory '/software/oracle' is not owned by root
"/opt/oracle/voting/voting1" does not exist. Create it before proceeding.
Make sure that this file is shared across cluster nodes.Please share your views and suggest what to do in this situation...
Regards
Umesh
Edited by: Umesh Gupta on Aug 22, 2011 12:43 PM

Helios- Gunes EROL wrote:
Hi;
Please check your voting disk
See:
http://www.oracledba.org/11g/rac/11g_RAC_Admin_Utilities.html#Viewing_Votedisk_Information:
Regard
HeliosHere are the results..
$./crsctl query css votedisk
0.     0    /opt/oracle/voting/voting1
located 1 votedisk(s).
$ocrcheck
Status of Oracle Cluster Registry is as follows :
         Version                  :          2
         Total space (kbytes)     :     301852
         Used space (kbytes)      :       3016
         Available space (kbytes) :     298836
         ID                       :   66623280
         Device/File Name         : /opt/oracle/ocr/ocr1
                                    Device/File integrity check succeeded
                                    Device/File not configured
         Cluster registry integrity check succeededbut from this i could not identify which raw disk is used as Voting and OCR
Regards
Umesh

Similar Messages

  • Error in installing Oracle Software while adding node in RAC

    Hi All
    Oracle Version: 11.1.0.6.0
    Linux
    In the RAC environment, I am in the process of adding a node to the existing rac environment.
    I have succssfully installed cluster software in the new node. all gsd, ons and vip services are running perfectly for new node in the existing and new nodes.
    Next step, I started installing oracle software by executing the script $ORACLE_HOME/oui/bin/addNode.sh.
    Here after specifying the the new node information (public host, private host and vip details) and when I pressed next,
    OUI is giving following error - "Error occured while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured".
    I ran olsnodes -n, it is giving proper node number.
    Can somebody help me in identifying the problem and solution.
    Thanks

    I am hitting the same issue, my problem was when I added the new node initially it fails because of the hint8-priv1. I followed the link below to remove and cleanup the last install. olsnode show only my existing nodes NOT including the new node.
    http://download-west.oracle.com/docs/cd/B12037_01/rac.101/b10765/adddel.htm
    then I ran
    ./addNode.sh -silent CLUSTER_NEW_NODES={hint-8} CLUSTER_NEW_PRIVATE_NODE_NAMES={hint8-priv1} CLUSTER_NEW_VIRTUAL_HOSTNAMES={hint8-vip}
    I am getting this when use command line:
    Error ocurred while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured.
    SEVERE:Error ocurred while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured.
    also run addNode.sh via GUI, the new node name still listed and can't continue.
    BTW, adding new node should support online, shutdown is not required

  • DACExecutionPlan: Error while loading nodes. Error while loading nodes.null

    Hi There,
    One of my DAC Execution Plan is giving following error: Error while loading nodes. Error while loading nodes.null
    We have restarted DAC services.
    I have reassembled subject area, generated execution plan parameters, and rebuilt execution plan.
    But still its is giving same error.
    Any thoughts pls?
    Thanks,
    Raghu

    Actually while the EP is in a failed state, I added few tasks and assembled subject area and built EP.
    Later when I restarted the failed EP, it was giving below error.
    Sol: I maked EP as completed and ran the EP, it went fine.
    Thanks for yor help,
    Raghu

  • Error while adding A/P Credit Memo!

    Error while adding A/P Credit Memo..........
    'G/L Accounts' (OACT) (ODBC-2028) Message - 131-183
    Please advice me .....
    Thanks...

    Hi
    Check this thread this may help you.
    [Re: AP Invoice - No Matching Account Error]
    Regards
    Balaji

  • Error while adding a connector for SSL..help!!!

    i'm getting this error when i added a connector for SSL and restarted tomcat
    my connector tag is
    <Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
          <Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
        </Connector>
    LifecycleException:  Protocol handler instantiation failed: java.lang.NullPointe
    rException
            at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
    java:1368)
            at org.apache.catalina.core.StandardService.initialize(StandardService.j
    ava:609)
            at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
    a:2384)
            at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
            at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
            at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)

    The question is answered in CRM 7.0 forum:
    Getting error while adding a custom field (with input help) through AET

  • Error while adding a custom field with Input help via AET

    Hi All,
    I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
    One field is required to have the input search help f4 and autopopulates the second field
    I am able to add one field(not requiring help) successfully through AET .
    I have created one Zsearch_help in se11 and its successfully running  and Autopopulating seocnd field while I am testing it
    While adding second field through AET,I need to enter following details as -
    field label,search relevant ,serach help etc.
    When I type the name of my 'Zsearch_help' against field search help it gives me following error
    'Search help is not compatible'.
    Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
    Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
    Please help me out.Kindly be detailed as I am new to SAP CRM.
    Thanks,
    Shivani

    The question is answered in CRM 7.0 forum:
    Getting error while adding a custom field (with input help) through AET

  • Error while adding a record

    I am getting the following error while adding record into the table CM_RECIPE_ITEM :
    <h4> Error </h4>
    ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
         Error      Unable to process row of table CM_RECIPE_ITEM.
    Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
    Thanking You,
    Yogesh
    <h4> CM_RECIPE_ITEM Table </h4>
    CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
    625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
    626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
    <h4>Global temporary table</h4>
    DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
    CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
    ROW_ID ROWID
    ON COMMIT PRESERVE ROWS
    NOCACHE;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
    BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
    BEGIN
    INSERT INTO interim VALUES (:new.rowid);
    END;
    <h4>Trigger to update data on CM_RECIPE table </h4>
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
    AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
    BEGIN
    FOR ds IN (SELECT row_id FROM interim) LOOP
    UPDATE CM_RECIPE
    SET CR_RMC = (
    SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
    FROM CM_RECIPE_ITEM
    WHERE CRI_BOM_CODE = CR_BOM_CODE
    AND rowid = ds.row_id
    UPDATE CM_RECIPE
    SET CR_TOTAL_COST = (
    SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id
    ) + CR_RMC;
    UPDATE CM_RECIPE
    SET CR_GROSS_MARGIN =
    (SELECT CIFG_DP_RATE
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
    END LOOP;
    END;
    /

    The scripts of the tables CM_ITEM_FG, CM_RECIPE, CM_RECIPE_ITEM are as follows :
    <h4>CM_ITEM_FG</h4>
    ALTER TABLE COSTMAN.CM_ITEM_FG
    DROP PRIMARY KEY CASCADE;
    DROP TABLE COSTMAN.CM_ITEM_FG CASCADE CONSTRAINTS;
    CREATE TABLE COSTMAN.CM_ITEM_FG
    CIFG_CODE VARCHAR2(13 BYTE) NOT NULL,
    CIFG_CCG_ID NUMBER NOT NULL,
    CIFG_NAME VARCHAR2(50 BYTE) NOT NULL,
    CIFG_PACKING NUMBER NOT NULL,
    CIFG_OVERHEAD NUMBER NOT NULL,
    CIFG_OTHERS NUMBER NOT NULL,
    CIFG_DP_RATE NUMBER NOT NULL,
    CIFG_CR_BY VARCHAR2(32 BYTE),
    CIFG_CR_ON DATE,
    CIFG_UPD_BY VARCHAR2(32 BYTE),
    CIFG_UPD_ON DATE
    TABLESPACE COST_MANAGER
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_PK_001 ON COSTMAN.CM_ITEM_FG
    (CIFG_CODE, CIFG_CCG_ID)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE UNIQUE INDEX COSTMAN.CM_ITEM_FG_UK_001 ON COSTMAN.CM_ITEM_FG
    (CIFG_CODE)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_ITEM_FG_T1"
    BEFORE UPDATE ON "CM_ITEM_FG"
    FOR EACH ROW
    BEGIN
    BEGIN
    UPDATE CM_RECIPE
    SET CR_TOTAL_COST = (CR_RMC + :NEW.CIFG_PACKING + :NEW.CIFG_OVERHEAD + :NEW.CIFG_OTHERS);
    END;
    BEGIN
    UPDATE CM_RECIPE
    SET CR_GROSS_MARGIN = (:NEW.CIFG_DP_RATE - CR_TOTAL_COST) / CR_TOTAL_COST;
    END;
    END;
    ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
    CONSTRAINT CM_ITEM_FG_PK_001
    PRIMARY KEY
    (CIFG_CODE, CIFG_CCG_ID)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    CONSTRAINT CM_ITEM_FG_UK_001
    UNIQUE (CIFG_CODE)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    ALTER TABLE COSTMAN.CM_ITEM_FG ADD (
    CONSTRAINT CM_ITEM_FG_FK_001
    FOREIGN KEY (CIFG_CCG_ID)
    REFERENCES COSTMAN.CM_COST_GROUP (CCG_ID));
    <h4>CM_RECIPE</H4>
    ALTER TABLE COSTMAN.CM_RECIPE
    DROP PRIMARY KEY CASCADE;
    DROP TABLE COSTMAN.CM_RECIPE CASCADE CONSTRAINTS;
    CREATE TABLE COSTMAN.CM_RECIPE
    CR_ID NUMBER NOT NULL,
    CR_CCG_ID NUMBER,
    CR_EFF_FROM DATE,
    CR_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
    CR_BOM_CODE VARCHAR2(50 BYTE),
    CR_QUANTITY NUMBER,
    CR_RMC NUMBER,
    CR_TOTAL_COST NUMBER,
    CR_GROSS_MARGIN NUMBER,
    CR_CR_BY VARCHAR2(32 BYTE),
    CR_CR_ON DATE,
    CR_UPD_BY VARCHAR2(32 BYTE),
    CR_UPD_ON DATE
    TABLESPACE COST_MANAGER
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_PK_001 ON COSTMAN.CM_RECIPE
    (CR_CCG_ID, CR_ID, CR_CIFG_CODE)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_001 ON COSTMAN.CM_RECIPE
    (CR_ID)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_UK_002 ON COSTMAN.CM_RECIPE
    (CR_BOM_CODE)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_T1"
    BEFORE INSERT ON "CM_RECIPE"
    FOR EACH ROW
    DECLARE
    L_ID NUMBER;
    BEGIN
    IF INSERTING THEN
    IF :NEW.CR_ID IS NULL THEN
    --SELECT CM_RECIPE_SEQ.NEXTVAL INTO L_ID FROM DUAL;
    :NEW.CR_ID := CM_RECIPE_SEQ.NEXTVAL; --L_ID;
    END IF;
    :NEW.CR_CR_ON := SYSDATE;
    :NEW.CR_CR_BY := nvl(v('APP_USER'),USER);
    END IF;
    IF UPDATING THEN
    :NEW.CR_UPD_ON := SYSDATE;
    :NEW.CR_UPD_BY := nvl(v('APP_USER'),USER);
    END IF;
    END;
    ALTER TABLE COSTMAN.CM_RECIPE ADD (
    CHECK ("CR_EFF_FROM" IS NOT NULL) DISABLE,
    CHECK ("CR_CCG_ID" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CHECK ("CR_QUANTITY" IS NOT NULL) DISABLE,
    CONSTRAINT CM_RECIPE_PK_001
    PRIMARY KEY
    (CR_ID)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    CONSTRAINT CM_RECIPE_UK_002
    UNIQUE (CR_BOM_CODE)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    <h4>CM_RECIPE_ITEM</H4>
    ALTER TABLE COSTMAN.CM_RECIPE_ITEM
    DROP PRIMARY KEY CASCADE;
    DROP TABLE COSTMAN.CM_RECIPE_ITEM CASCADE CONSTRAINTS;
    CREATE TABLE COSTMAN.CM_RECIPE_ITEM
    CRI_ID NUMBER NOT NULL,
    CRI_CR_ID NUMBER NOT NULL,
    CRI_BOM_CODE VARCHAR2(50 BYTE) NOT NULL,
    CRI_CIFG_CODE VARCHAR2(10 BYTE) NOT NULL,
    CRI_CIRM_CODE VARCHAR2(10 BYTE) NOT NULL,
    CRI_SEQ NUMBER,
    CRI_QTY NUMBER,
    CRI_RM_COST NUMBER,
    CRI_CR_BY VARCHAR2(32 BYTE),
    CRI_CR_ON DATE,
    CRI_UPD_BY VARCHAR2(32 BYTE),
    CRI_UPD_ON DATE
    TABLESPACE COST_MANAGER
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    CREATE UNIQUE INDEX COSTMAN.CM_RECIPE_ITEM_PK_001 ON COSTMAN.CM_RECIPE_ITEM
    (CRI_ID)
    LOGGING
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOPARALLEL;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T2"
    BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM"
    FOR EACH ROW
    BEGIN
    IF :NEW.CRI_CR_ID IS NULL THEN
    SELECT CR_ID INTO :NEW.CRI_CR_ID
    FROM CM_RECIPE
    WHERE CR_BOM_CODE = :NEW.CRI_BOM_CODE;
    END IF;
    END;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T1" BEFORE
    INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
    DECLARE
    L_ID NUMBER;
    SEQ NUMBER;
    BEGIN
    IF INSERTING THEN
    IF :NEW.CRI_ID IS NULL THEN
    SELECT CM_RECIPE_ITEM_SEQ.NEXTVAL
    INTO :NEW.CRI_ID
    FROM dual;
    END IF;
    :NEW.CRI_CR_ON := SYSDATE;
    :NEW.CRI_CR_BY := NVL(v('APP_USER'),USER);
    SELECT (NVL(MAX(CRI_SEQ),0)+1)
    INTO SEQ
    FROM CM_RECIPE_ITEM
    WHERE CRI_BOM_CODE = :NEW.CRI_BOM_CODE;
    :NEW.CRI_SEQ := SEQ;
    END IF;
    IF UPDATING THEN
    :NEW.CRI_UPD_ON := SYSDATE;
    :NEW.CRI_UPD_BY := NVL(v('APP_USER'),USER);
    END IF;
    END;
    ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
    CHECK ("CRI_RM_COST" IS NOT NULL) DISABLE,
    CHECK ("CRI_QTY" IS NOT NULL) DISABLE,
    CHECK ("CRI_SEQ" IS NOT NULL) DISABLE,
    CONSTRAINT CM_RECIPE_ITEM_PK_001
    PRIMARY KEY
    (CRI_ID)
    USING INDEX
    TABLESPACE COST_MANAGER
    PCTFREE 10
    INITRANS 2
    MAXTRANS 255
    STORAGE (
    INITIAL 64K
    MINEXTENTS 1
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0
    ALTER TABLE COSTMAN.CM_RECIPE_ITEM ADD (
    CONSTRAINT CM_RECIPE_FK_002
    FOREIGN KEY (CRI_CIRM_CODE)
    REFERENCES COSTMAN.CM_ITEM_RM (CIRM_CODE),
    CONSTRAINT CM_RECIPE_ITEM_FK_001
    FOREIGN KEY (CRI_CR_ID)
    REFERENCES COSTMAN.CM_RECIPE (CR_ID));
    Yogesh

  • Error while adding a job to scheduler

    Hello,
    I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
    Thanks.
    [Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
    When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.

    Hi Rizwan Tahir  ,
    Delete the job server associated with the current batch job and recreate it.
    Then try creating a new schedule using the new job server.
    And take care that job server is created in QA environment.
    Hope this should work.
    Regards,

  • Error while adding Image: ORA-00001: unique constraint

    Dear all,
    I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
    Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
    Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
    Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
    Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
    Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
    Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
    Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
    Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
    Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
    Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
    Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
    Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
    Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
    Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
    Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
    Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
    I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
    One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
    BR
    Roman
    Edited by: Roman Becker on Jan 13, 2009 12:59 AM

    Hi Ritam,
    For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
    For now I will close this thread as unanswered.
    SAP SRM Moderators.

  • The external credentials in the SSO database are more recent --- Receiving this error while adding entries to SSO database.

    We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
    error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
    iled unexpectedly.\r
    : error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
    dentials in the SSO database are more recent.\r
     error MSB4018: \r
     error MSB4018:    at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
    ring applicationName, String identifier, IPropertyBag properties)\r
     error MSB4
    018:    at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
    me, String propName, String propValue)\r
     error MSB4018:    at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
    ()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
    askExecutionHost.Execute()\r
     error MSB4018:    at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
    cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
    askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
    sult)
    Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010

    Hi,
    This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
    1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
    2. If this does not works, have a look at this
    link
    Hope this will help.
    HTH,
    Sumit
    Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

  • Getting an error while adding the user in Sharepoint foundation 2010 environment.

    Hi,
    I am having full control access to SharePoint site. Then i tried add user for that site.
    But i am getting following error while adding the user to the site.
    An unexpected error has occurred.
    Troubleshoot issues with microsoft SharePoint Foundation.
    Correlation ID:3035B777-1B7C-4463-B35E-06657B72C2E4
    Can you please help me anyone on this.
    Thanks,
    Ashok

    This could be any one of a number of things.  You need to lookup the Correlation ID in the ULS logs on the SharePoint server.  That should provide the additional information necessary to diagnose and solve the problem.  Here's a blog post
    on how to find the error.
    http://habaneroconsulting.com/Blog/Posts/Get_the_Real_SharePoint_Error_using_the_ULS_Logs.aspx#.UvEuffldWik 
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • HELP --- Error while adding Portlets to the Page. (WWC-44012)

    Hi all,
    I have a pl/sql portlet. It compiles fine and shows up perfectly in portlet repository. But when i add this to the page, I get following error
    Error while adding Portlets to the Page. (WWC-44012)
    An unexpected error occurred: User-Defined Exception (WWC-43000)
    An unexpected error occurred: User-Defined Exception (WWC-43000)
    An unexpected error occurred: User-Defined Exception (WWC-51004)
    (WWC-00000)
    I checked the portlet specification file (.pks) and body file (.pkb) for any mistakes but they seems fine.
    Does anyone know what can cause this error?
    Any pointers in this regards will be highly appreciated.
    Thanks!!!
    Rajesh

    Rajesh,
    Could you provide some more details about your code? I will try to look into possible causes of the error. One thing you may try is subscribing to the Knowledge Exchange on http://portalcenter.oracle.com. Then you could post your code in your community folder and everyone would be able to test it out.
    Of course, this means you must be willing to share your code with everyone.
    James

  • Error while adding portlets

    Error: Internal error (WWC-00006)
    An unexpected error has occurred in pages: ORA-06502: PL/SQL: numeric or value error: character to number conversion error (WWC-44847)
    Couldn't save attribute Content_Owner. (WWV-03005)
    Couldn't save attribute Content_Author. (WWV-03005)
    Hi,
    I am getting this error while adding portlets to my page group..any suggestions?
    Thanks in advance

    No, This is happening with oracle defined portlets. But , I am also not able to add any navigation page as a portlet to any of my page. Is it any database back up issue? as I am testing something in UAT , in dev environment everything is fine.

  • Error while adding principal to a process

    Hi All,
    I am getting the following error while adding security principal to Task Manager for my process,
    Caused by: | [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClie
    nt] errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCExceptio
    n is Null or NOT An Instance of UMException chainedException:ALC-DSC-012-000: co
    m.adobe.idp.dsc.registry.ServiceNotFoundException: Service: DirectoryManagerServ
    ice not found.chainedExceptionMessage:Service: DirectoryManagerService not found
    . chainedException trace:ALC-DSC-012-000: com.adobe.idp.dsc.registry.ServiceNotF
    oundException: Service: DirectoryManagerService not found.
    at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getServic
    e(ServiceRegistryImpl.java:972)
    at com.adobe.idp.dsc.registry.service.impl.ServiceRegistryImpl.getHeadAc
    tiveConfiguration(ServiceRegistryImpl.java:830)
    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.resolveConfiguration(
    ServiceEngineImpl.java:146)
    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:58)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMes
    sage(AbstractMessageReceiver.java:88)
    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessa
    geDispatcher.java:210)
    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(A
    bstractMessageDispatcher.java:57)
    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:2
    08)
    at com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient.
    findPrincipals(DirectoryManagerServiceClient.java:835)
    at com.adobe.repository.ui.aac.commands.FindPrincipalsCommand.execute(Fi
    ndPrincipalsCommand.java:127)
    at com.adobe.repository.ui.aac.commands.CommandProcessor.execute(Command
    Processor.java:56)
    at com.adobe.repository.ui.aac.struts.actions.FindPrincipalsAction.execu
    te(FindPrincipalsAction.java:115)
    at com.adobe.repository.ui.aac.struts.actions.CommandProcessorAction.exe
    Any help is greatly appreciated.
    Thanks
    Raghu

             I am using RHEL 5 - 64 bit Linux on 3-Tera Virtual host with Java 5,MySQL and  adobe pre-configured Jboss 4.2 to install LiveCycle 8.2 and My intension is to get the Rights Management Service Installed  . After configuring the .ear files(using Rights Management alc-lfs not excluded-solution component  in the LCM CLI properties file ) and running the Jboss , I get the Jboss Running but with following Error
    ERROR  [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public  abstract java.lang.Object  com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.do RequiresNew(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.ds c.transaction.TransactionCallback)  throws com.adobe.idp.dsc.DSCException:
    ALC-DSC-000-000:  com.adobe.idp.dsc.DSCRuntimeException: Internal  error.
            at  com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doR equiresNew(EjbTransactionBMTAdapterBean.java:249)
            at  sun.reflect.NativeMethodAccessorImpl.invoke0(Native  Method)
    Caused by:  java.lang.NoClassDefFoundError:  com/adobe/dctmconnector/config/DctmConnectorConfigBean
            at  java.lang.Class.getDeclaredConstructors0(Native  Method)
            at  java.lang.Class.privateGetDeclaredConstructors(Class.java:2357)
            at  java.lang.Class.getConstructor0(Class.java:2671)
            at  java.lang.Class.newInstance0(Class.java:321)
            at  java.lang.Class.newInstance(Class.java:303)
            at  com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$12.doInTransact ion(ComponentRegistryImpl.java:877)
            at  com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doR equiresNew(EjbTransactionBMTAdapterBean.java:218)
            ... 199  more
    2009-06-16 10:23:02,554 ERROR  [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason:  Internal error.
    2009-06-16 10:23:02,554 WARN   [com.adobe.idp.dsc.startup.DSCStartupServlet] Unable to start the  DSCManager
    and upon running the deploy liveCycle Component using LCM CLI task
    ./ConfigurationManagerCLI.sh  deployLiveCycleComponets -f cli_propertyFile.txt
    I see that few of  DSCs (especially the adobe-usermanager-dsc ) were  never started by the installer and It stopped throwing Exceptions While trying to deploy  adobe-rightsmanagement-jboss-dsc.jar.
    Progress: [5%,    DSC already  installed, but is not started  adobe-remotingConnector-dsc.jar]
    Progress: [8%, Deploying DSC    adobe-usermanager-dsc.jar]
    Progress: [8%,    DSC already  installed, but is not started  adobe-usermanager-dsc.jar]
    Progress: [11%, Deploying DSC    adobe-usermanager-util-dsc.jar]
    Progress: [11%,    DSC already  installed, but is not started  adobe-usermanager-util-dsc.jar]
    Progress: [14%, Deploying DSC    adobe-jobmanager-dsc.jar]
    Progress: [14%,    DSC already  running adobe-jobmanager-dsc.jar]
    While LCM CLI tries to install  RightsManagement DSC following exceptions are  thrown
    [2009-06-16 10:47:16,604], INFO,  main, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, DSC not installed.  DSC will now be installed: com.adobe.livecycle.RightsManagement  /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar
    [2009-06-16 10:47:32,227], SEVERE,  main, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Failed to deploy  component  /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar.
    com.adobe.livecycle.lcm.core.LCMException[ALC-LCM-030-200]:  \ to deploy component  /opt/adobe/livecycle8.2/deploy/adobe-rightsmanagement-jboss-dsc.jar.
            at  com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCFiles(DeployDSCs .java:396)
            at  com.adobe.livecycle.lcm.feature.deployment.DeployDSCs.deployDSCs(DeployDSCs.jav a:149)
    Caused by:  com.adobe.idp.common.errors.exception.IDPSystemException: nullorigin: |  [com.adobe.livecycle.usermanager.client.DirectoryManagerServiceClient]  errorCode:16385 errorCodeHEX:0x4001 message:Exception wrapped in DSCException is  Null or NOT An Instance of UMException chainedException:ALC-DSC-012-000:  com.adobe.idp.dsc.registry.ServiceNotFoundException: Service:  DirectoryManagerService not found.chainedExceptionMessage:Service:  DirectoryManagerService not found. chainedException trace:ALC-DSC-012-000:  com.adobe.idp.dsc.registry.ServiceNotFoundException: Service:  DirectoryManagerService not found.
    I tried to look for adobe-usermanager-dsc in the admin UI but did not find one over there . I even tried copying the adobe-usermanager-dsc.jar to pre-configured Jboss server/all/lib directory but that does'nt makes a difference .
    I was suggested to use different combinations of excluded solution  components in the cliProperties file
    When I used the following list of   excludedSolutionComponents  I did not see the (ERROR  [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason:  Internal error.) but still the dobe-usermanager-dsc does not starts and I get the same errors of (com.adobe.idp.dsc.registry.ServiceNotFoundException: Service:  DirectoryManagerService not found.) when the LCM CLI reaches installing the Rights Management DSC.
    excludedSolutionComponents=ALC-LFS-BusinessActivityMonitoring,ALC-LFS-ConnectorI BMContentManager,ALC-LFS-ContentServices,ALC-LFS-PDFGenerator,ALC-LFS-ProcessMan agement
    #,ALC-LFS-RightsManagement,ALC-LFS-BarcodedForms,ALC-LFS-DigitalSignatures,ALC-L FS-Forms,ALC-LFS-Output,ALC-LFS-PDFGenerator3D,ALC-LFS-ReaderExtensions,ALC-LFS- ConnectorEMCDocumentum,ALC-LFS-ConnectorIBMFileNet
    Any help on this issue will be highly obliged.
    Thank you.
    Mohammad

  • Error while adding record

    I am getting the following error while adding record into the table CM_RECIPE_ITEM :
    Error
    ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
    Error Unable to process row of table CM_RECIPE_ITEM.
    Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.
    Thanking You,
    Yogesh
    CM_RECIPE_ITEM Table
    CRI_ID------CRI_CR_ID--------CRI_BOM_CODE--------CRI_CIFG_CODE---------CRI_CIRM_CODE--------CRI_SEQ--------CRI_QTY--------CRI_RM_COST
    625----------464-----------------PRODUCT3001----------FG003----------------------10---------------------------1-------------------60-----------------10
    626----------464-----------------PRODUCT3001----------FG003----------------------12---------------------------2-------------------40------------------10
    Global temporary table
    DROP TABLE COSTMAN.INTERIM CASCADE CONSTRAINTS;
    CREATE GLOBAL TEMPORARY TABLE COSTMAN.INTERIM
    ROW_ID ROWID
    ON COMMIT PRESERVE ROWS
    NOCACHE;
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3"
    BEFORE INSERT OR UPDATE ON "CM_RECIPE_ITEM" FOR EACH ROW
    BEGIN
    INSERT INTO interim VALUES (:new.rowid);
    END;
    Trigger to update data on CM_RECIPE table
    CREATE OR REPLACE TRIGGER COSTMAN."CM_RECIPE_ITEM_T3_AFTER"
    AFTER INSERT OR UPDATE ON "CM_RECIPE_ITEM"
    BEGIN
    FOR ds IN (SELECT row_id FROM interim) LOOP
    UPDATE CM_RECIPE
    SET CR_RMC = (
    SELECT SUM(CRI_QTY * CRI_RM_COST)/SUM(CR_QUANTITY)
    FROM CM_RECIPE_ITEM
    WHERE CRI_BOM_CODE = CR_BOM_CODE
    AND rowid = ds.row_id
    UPDATE CM_RECIPE
    SET CR_TOTAL_COST = (
    SELECT CIFG_PACKING + CIFG_OVERHEAD +CIFG_OTHERS
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id
    ) + CR_RMC;
    UPDATE CM_RECIPE
    SET CR_GROSS_MARGIN =
    (SELECT CIFG_DP_RATE
    FROM CM_ITEM_FG
    WHERE CIFG_CODE = CR_CIFG_CODE
    AND rowid = ds.row_id) - CR_TOTAL_COST) / CR_TOTAL_COST;
    END LOOP;
    END;
    /

    yogeshyl wrote:
    Error
    ORA-20505: Error in DML: p_rowid=626, p_alt_rowid=CRI_ID, p_rowid2=, p_alt_rowid2=. ORA-01410: invalid ROWID ORA-06512: at "COSTMAN.CM_RECIPE_ITEM_T3_AFTER", line 11 ORA-04088: error during execution of trigger 'COSTMAN.CM_RECIPE_ITEM_T3_AFTER'
    Error Unable to process row of table CM_RECIPE_ITEM.
    Kindly suggest if the problem is because of the Global temporary table or the triggers given below. Also suggest the solution.The error message points to the trigger...

Maybe you are looking for