Error while adding Parameter Field to CrossTab report in CR 2008
Hello Experts,
I'm getting an error - "Not supported" while I'm trying to add a paremeter to the Crosstab report. It is a simple report with no further complications.
Is there any special way to add a parameter field to Crosstab? Any help appreciated.
TIA
arjun
Hi,
What version of Crystal Report are you using?
Kindly refer SAP Note 1376117 & 1454192 and verify if you are on the approriate patch.
Regards,
Nakul
Similar Messages
-
ERROR while adding summary field in group footer
Hi all,
i am using CR Server XI R2
i am trying to a subtotal in a group header using the code below
fieldobjCls = new CrystalDecisions.ReportAppServer.ReportDefModel.FieldObjectClass();
fieldobjCls.Kind = CrystalDecisions.ReportAppServer.ReportDefModel.CrReportObjectKindEnum.crReportObjectKindField;
fieldobjCls.FieldValueType = CrFieldValueTypeEnum.crFieldValueTypeInt32sField;
fieldobjCls.Name = "Count";
fieldobjCls.DataSource = "Count({CSP_PROCESS_REPORT.userid})";
fieldobjCls.Left = 1000;
fieldobjCls.Top = 700;
fieldobjCls.Width = 1000;
fieldobjCls.Height = 300;
boSection = rcDoc.ReportDefinition.get_GroupHeaderArea(0).Sections[0];
rcDoc.ReportDefController.ReportObjectController.Add(fieldobjCls, boSection, -1);
as a result i am getting the error as
Cannot find the section in the group area pair of the summary field.
how to solve
Padmanaban VTry adding the summary field in the Report Designer first, then do the same steps in code. If it doesn't work in the deisgner it won't work in code.
-
Error while adding user fields to user table using vb6.0
Hi,
I am adding a user tables using vb6.0 using DIAPI.
I am able to add the user table successfully.
I am getting the following error when i am adding the fields to the table.
"The metadata object for this object cannot be updated, since it's ref count is bigger than 0."
My code is as follows:
oUserFieldsMD.TableName = TABLE_NAME_ITEM_LOCN
oUserFieldsMD.Name = vTableFields(0, lCount)
oUserFieldsMD.Description = vTableFields(1, lCount)
oUserFieldsMD.Type = vTableFields(2, lCount)
oUserFieldsMD.EditSize = CLng(vTableFields(3,lCount))
lRetCode = oUserFieldsMD.Add
This error does not come up when i try to add the field to my table using the vb sample provided by SAP.
Your help will me much appreciated.
Thanks.Hi Satish,
The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
e.g
Dim pUTables As SAPbobsCOM.UserTablesMD
'Do your stuff
Set pUTables = Nothing
Dim pUFields As SAPbobsCOM.UserFieldsMD
'Do your stuff
Set pUFields = Nothing -
Error while adding custom fields in ERP quotation
I am trying to add custom fields to ERP quotation. So picked up ERP_H and added view BTCUSTOMER_H/CustomerH to its views. I have added the relevant custom fields to BTCUSTOMER_H/CustomerH. Now when I try displaying this, I get the following error..
Context generation failed in view BTCUSTOMER_H/CustomerH of UI Component ERP_H
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Initialization of view BTCUSTOMER_H/CustomerH of UI Component ERP_H failed
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Cannot display view ERP_H/HeaderOverviewpage of UI Component ERP_H
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - There is no node text 'BTAdminH' in controller ''.
Method: CL_BSP_WD_CONTROLLER=>DO_CONTEXT_NODE_BINDING
Source Text Row: 39
Window ERP_H/MainWindow of UI Component ERP_H cannot be displayed
An exception has occurred Exception Class CX_BSP_WD_RUNTIME_ERROR - View BTCUSTOMER_H/CustomerH in component ERP_H could not be bound
Method: CL_BSP_WD_VIEW_CONTROLLER=>BIND_VIEW
Source Text Row: 165
I have no prior experiance in UI development. Could someone explain me this error and how to fix this?
Regards,
Amar.closing this unresolved
-
Error While Passing Parameter from Form to Report
I am using Dev 9ids. And i am compiling every forms from form 5 to form 9i. and report too.
Most of reports are running.
in some i am getting problem where i do pass more than 5,6 parameters.
for e.g in one case say
set_report_object_property(rep_id,REPORT_OTHER,'comp_code='||:global.vc_comp_code||' inv='||inv||' invoice_no='||inv_no||' invoice_date='||inv_dt||' vc_name='||cust_name||' Paramform=no');
this will not run and give error FRM-41214
when i exclude vc_name or shorten the value of cust_name report run fine.
length of cust_name and in report vc_name is proper.
I also need to pass more parameters to report.
I do think there might be parameter size in any of report system files to be increased.
Pls help me out how to rectify this problem.
thanks in advance.
rajYou are not getting the result in the report because you have chosen the button event as Query.
Edit the form, for the Execute button, choose the button event Custom and use the same pl/sql code that you have used before.
If the event is Query, then the session object does not have value of A_EMPNO at the point where you have written your code. The session object is populated after the Query event has taken place. -
Error while adding custom fields using EEWB.
Hi
While trying to add custom fields using the transaction EEWB i got an error message
'No Logsys040 transport request exists for system workbench.Please let me know why it happens.
Thanks
sureshpaulclosing this unresolved
-
Error while adding new field in the Segment type thru WE31.
Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 45B. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
Points will be rewarded
regards,
neslin.Hi
You can create a new version. This will not create any problems. You might not be able to cancel the release because of upgrade.
Thanks
Vijay -
EEWB Enhancement Error while adding new field
Hello Experts ,
The requirement is to add the attachment feild in the support desk message screen (CRMD_ORDER) in the Fast track tab , although in the transaction tab already the document option is available for attachments the end user's want it in intial screen.
I have tried this using EASY ENHANCEMENT WORKBENCH - EEWB as per the suggestions given by experts in SDN,now i face a problem in EEWB .
I have created a object and extention in EEWB under a project,the it took me to the wizard automatically ,i followed up the notes in wizard to ADD_NEW_FIELDS and after it is completed, it shows a ERROR message as "Definition CRM_BTX_ADD_NEW_FIELDS is of the type 'TSK' and should run on an external system. This is not permissible. Only definitions of type 'SEQ' may be created for external systems." What does this Error Mean?Should i have to follow any system settings for this?
Note : I have made the system settings in EEWC -System Data Maintenence before enhancement.
Has any one worked with EEWB to ADD new fields,if so then please give me a solution to solve this problem.
Thanks & Regards,
Mohana PriyaHi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj -
Error While Creating New Field thru EEWB
Hello CRM Experts,
I have found following Error while adding New Fields through EEWB. Can any one help to analyse and give the solution?
It gives Error Log as- System type OLTP with role DEV is not specified correctly. System type OLTP with role DEV is not specified correctly
Thanks for your reply in advance.Hi Priya,
We are also facing similar error in EEWB. If you have solved this problem, please update thread.
Thanks
Dhanraj -
Getting error while adding a custom field (with input help) through AET
Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running while I am testing it
While adding fsecond field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Please help me out.Kindly be detailed as I am new to SAP CRM.Thanks for very helpful reply. After implementing the suggested SAP note, I am able to see the getter and setter methods.
So one of my problem has got solved with your kind help:)
As per your another suggestion,I have created the enhanced fields without the search help from AET in the node BTAdminI with names Plant(ZZPLANT) and Storage Location(ZZStoarge_Loc).
Now I am facing below problem:
Since Plant needs to autopopulated by Storage Location (search Help ZOFI_SHLP_STORAGE_LOC),So I need to Implement Getter setter method.
I have written below code into Get_V_ZZStorage_Loc Method:
method GET_V_ZZSTORAGE_LOC.
DATA:
ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'ZZSTORAGE_LOC'.
ls_map-f4_attr = 'STORAGE_LOC'. (Storage_loc is the parameter defined in search help)
APPEND ls_map TO: lt_inmap, lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
EXPORTING
iv_help_id = 'ZOFI_SHLP_STORAGE_LOC1'
iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_callback
iv_input_mapping = lt_inmap
iv_output_mapping = lt_outmap.
endmethod.
But its not working.Should I write some code in Get_P_XX or some other method also?
Kindly suggest . -
Error while adding a custom field with Input help via AET
Hi All,
I need to add two custom field under Service orders at Item level in component BT140I_SRVP.
One field is required to have the input search help f4 and autopopulates the second field
I am able to add one field(not requiring help) successfully through AET .
I have created one Zsearch_help in se11 and its successfully running and Autopopulating seocnd field while I am testing it
While adding second field through AET,I need to enter following details as -
field label,search relevant ,serach help etc.
When I type the name of my 'Zsearch_help' against field search help it gives me following error
'Search help is not compatible'.
Secondly,not getting getter and setter methods for the attrributes in BTAdminI.
Last,please tell me if i create zhelp and activate it,would it automatically appear in the list on AETwhile assiging it to input field?
Please help me out.Kindly be detailed as I am new to SAP CRM.
Thanks,
ShivaniThe question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET -
Error with Dump while adding Currency field in UI
Hello,
I have a requirement to add a custom entity in MDGM with an currency attribute, and encountring dump while adding the field to Web Dynpro component in UI.
Could some one point me a direction and see below :
Custom Entity with attributes
ZTSTOCK data element is type curr (Lenght 13, Dec 2)
Data Model is activated without errors and created custom Web Dynpro Form component. while designing it in UIBB by adding Element TSTOCK_VL encountring a error and dump.
Error: Could not find attribute WAERS and also dump showing below:
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_WD_CONTEXT
ABAP Program CL_WDR_CONTEXT_NODE_INFO======CP
Application Component BC-WD-ABA-RUN
Date and Time 21.05.2014 00:13:32
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
terminated.
Any help please.
BR, SrihariYes, since the release of the current segment is 45 and you are now in a ECC6 system you cannot cancel the release (because there is no ECC6 version). Just use the add version button to create a new version for ECC6. Once you have that you can add fields and set the release to ECC6.
If you later on need to add more segements you can then cancel the release for your ECC6 segment and add the fields and set the release to ECC6 again (because you already have an ECC6 segment)
Hope that explains it,
Michael -
Error while Adding field on Screen Variant
Hi SAP Gurus,
I want to add one field Trading partner in Fast entry screen.
I am getting below error message while adding one field Trading Partner in Screen Variant ES007(O7E6)
FIELD instruction for field BSEG-VBUND missing on template screen
Message no. F4171
Please let me know where do I have to maintain Trading partner field in template screen.
A quick response on this is highly appreciate.
Regards,
SATVIR SINGH
Edited by: Satvir S Digwa on Oct 6, 2010 12:41 PMHi
Go through the below link:
Re: Trading partner in Field Status Group
Rgds
Vani -
Error while adding landed cost G/L account 5207010003 needs DR assignment for dimension 1; fill in DR-related fields
Hi Rajesh
Go to System Initilization => General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
Relase the Block and add the Document it will add.
With Regards
Balaji -
Error while adding a connector for SSL..help!!!
i'm getting this error when i added a connector for SSL and restarted tomcat
my connector tag is
<Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
<Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
</Connector>
LifecycleException: Protocol handler instantiation failed: java.lang.NullPointe
rException
at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
java:1368)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:609)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:2384)
at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET
Maybe you are looking for
-
pleas help me out my iphone 5c is only a month old...i shut it off over night and went to turn it back on the next day and it wouldn't turn on or charge or anything.....
-
T400, External monitor displayed off center.
So I have a Lenovo T400 with the ATI/onboard switchable graphics. When I plug it into my external monitor with the onboard graphics enabled, it displays correctly. When I have it connected with the ati graphics enabled, it displays off center and cut
-
Cant get windows to install in RAID
Hi, I am using a MSI neo3 p45 Express. First i create a RAID set, Then load driver with floopy using f6. everything goes great till i get to the part when it says windows XPSP2 is installing, then BSOD. I then go back , delete he RAID, and set co
-
Hi I can convert pdf in to word it gives me this "#$%!&'!()*+,&+,-!.)/!(#
-
Drive Stopped Burning Audio Discs
My Disc drive (G5 3 years old) seems to have stopped burning Audio discs using Toast. It seems to be doing data discs ok, but it appears domestic and computer players will now no longer accept my audio discs (Even both my Macs). Its always worked fin