Error while Apply Patch 8764069:R12.FND.B (Patch 8764069)
Hii...
im upgrading my oracle apps from 12.0.4 to 12.1.1 and following the metalink document
Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1]
Now while applying the Patch 8764069:R12.FND.B (Required),
it returns a error like
AutoPatch error:
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'fnd' - codeline 'R12.FND.B'.
Your current on-site codeline for the entity 'fnd' is: 'R12.FND.A'.
You should not apply this patch.
Apply an equivalent patch that is compatible with your
current codelines instead.
AutoPatch error:
A fatal error related to codelines or codelevels has occurred.
how can i resolve my issue..??..plz suggestt
Thankss..
Now while applying the Patch 8764069:R12.FND.B (Required),
Patch 8764069 is "POST USERMIGRATE TO HASH PASSWORDS, AFTER 12.1 UPG, FNDCPASS FAILS DECRYPT" and it required R12.FND.B to be installed.
it returns a error like
AutoPatch error:
This patch is not compatible with your current codelines.
This patch is compatible with: entity 'fnd' - codeline 'R12.FND.B'.
Your current on-site codeline for the entity 'fnd' is: 'R12.FND.A'.
You should not apply this patch.
Apply an equivalent patch that is compatible with your
current codelines instead.
AutoPatch error:
A fatal error related to codelines or codelevels has occurred.
how can i resolve my issue..??..plz suggesttYou are on R12.FND.A patchset and you should have R12.FND.B patchset installed in order to apply this patch. This is clearly explained in the patch README file -- https://updates.oracle.com/Orion/Services/download?type=readme&aru=11652182
So, apply R12.AD.B.1 (7461070) as mentioned in the README file then patch 8764069:R12.FND.B using "adpatch preinstall=y".
Thanks,
Hussein
Similar Messages
-
Error while applying 10.2.0.2 patch on Oracle10g.
Hi All,
I am getting the below error while applying the 10.2.0.2 Patch setup on fresh Oracle10g.
"Error in writing to file D:\Oracle\product\10.2.0.2.0\bin\oraevrus10.dll"
I was getting the above error contniously after clicking retry button.But even my installtion was moving ahead and in the end shown the message Installtion Successful.
But after that I am not able to loging using the sqlplus.Getting the below error
"The procedure entry point kglsim_cln could not be located in the dynamic link library orageneric10.dl"
Anybody know this issue please let me know.
MiteshAfternoon,
Thank you for your answer to rename the DLL file. That has worked now and I was able to continue the installation. I had the same problem with upgrade from 10.2.0.1.0 to 10.2.0.4.0.
Regards,
--Sean -
Hi All,
Getting error while applying patch 4440000
cd $AU_TOP/patch/115/driver/u4440000.drv
ERROR:
Failed: XDOLoader.class on worker 1
Failed: CustMigrationTool.class on worker 2
Failed: XDOLoader.class on worker 3
Failed: XDOLoader.class on worker 4
Worker 2 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Worker 1 log file:_
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 3 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 4 log file:_
Start time for file is: Tue Jun 23 2009 00:14:01
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:02
Please let me know any solution
Thanks in advance
Regards,
Bhanu Chander.Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander -
R12 Upgrade (Patch# 8764069:R12.FND.B)
During patch 8764069:R12.FND.B apply there is question to
Is Oracle Applications installed for commercial or for-profit use:
My organisation is non-profit, do I need to enter No or just accept default(Yes)?
This patch required before patch#7303030 (r12.1.1 upgrade)
thanksuser587327 wrote:
During patch 8764069:R12.FND.B apply there is question to
Is Oracle Applications installed for commercial or for-profit use:
My organisation is non-profit, do I need to enter No or just accept default(Yes)?
This patch required before patch#7303030 (r12.1.1 upgrade)
thanksi assume you are applying RUP 6 patch. regarding your query I dont it will matter much if you just let it to be default that is 'Yes'.
GoodLuck -
Error : While applying the Patch 4440000
Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein -
Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
Error while applying patch 3384350
Hi all,
I'm receiving the following error while apply patch 3384350 (Supply Chain Management Family Pack J 11i.SCM_PF.J) to an 11.5.9 instance.
from adpatch.log:
The following Oracle Forms objects did not generate successfully:
inv forms/US INVTDILT.fmx
from worker log:
Compiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignored
I have a SR open, but thought I would ask here as well in case anyone else had ran into this issue. There was only 1 direct hit on metalink for this error and it provided no solution and it's bug # link was not accessible to the public.
thanks in advance,
-ChadCompiling package body CHECK_RESERVATIONS_ALLOCATIONS...
Compilation error on package body CHECK_RESERVATIONS_ALLOCATIONS:
PL/SQL ERROR 358 at line 12, column 9
column 'INVENTORY_ITEM_ID' exists in more than one table; use qualifier
PL/SQL ERROR 0 at line 10, column 2
SQL Statement ignoredA workaround is to precede the column name ('INVENTORY_ITEM_ID') with the table name so that the column reference is unambiguous. Please note that this is only a workaround to fix the issue if you cannot afford waiting to hear back from Oracle support with a proper solution. -
Error while applying patch MLR#4
hi,
I am getting error while applying patch MLR#4. Can you please let me know whats error can be resolved?
Please see below the snapshots from log file.
Thanks,
Vaibhav
Execute perf_wid_pid_pcid.sql
Error: Abort transaction
java.lang.NullPointerException
at oracle.tip.adapter.b2b.data.B2BSchemaUpdate.addAQJMSTransportProtocolToGenericExchange(B2BSchemaUpdate.java:1009)
at oracle.tip.adapter.b2b.data.B2BSchemaUpdate.main(B2BSchemaUpdate.java:509)
Begin Transaction
Inserting DocumentRoutingID into X12_DOCUMENT_TYPE_PARAMETERS
Failure! Error stack:
java.lang.NullPointerException
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.getDocumentTypeParameter(DocumentProtocolWizard.java:819)
at oracle.tip.adapter.b2b.data.B2BParameterSeed.createDocumentTypeParameters(B2BParameterSeed.java:214)
at oracle.tip.adapter.b2b.data.B2BParameterSeed.main(B2BParameterSeed.java:160)
start: update opmn xml
Transaction started
An exception occured during seeding
java.lang.NullPointerException
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.getDocumentTypeParameter(DocumentProtocolWizard.java:819)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.createCustomDocumentTypeParameters(EBMSPatch.java:386)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.seed(EBMSPatch.java:56)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.main(EBMSPatch.java:38)
Seeding successful
Error -: AIP-11001: Transaction closed: Error -: AIP-11001: Transaction closed
at oracle.tip.buslogic.common.Transaction.commit(Transaction.java:72)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.seed(EBMSPatch.java:79)
at oracle.tip.adapter.b2b.exchange.ebms.EBMSPatch.main(EBMSPatch.java:38)
Caused by: Error -: AIP-11001: Transaction closed
at oracle.tip.repos.core.driver.CatalogTransaction.commit(CatalogTransaction.java:1464)
at oracle.tip.buslogic.common.Transaction.commit(Transaction.java:70)
... 2 more
Starting task #1 [AS1SeedTask] ...
Task [AS1SeedTask]: starting ...
EDI X12 over AS1 is being seeded.
create BusinessProtocol EDI-EDI_X12 over AS1....
creating AS Exchange Protocols...
create AS1 1.0
java.lang.Exception: No TransportProtocol found for the given name and revision 'EMail' '1.0'
at oracle.tip.seed.AS1SeedTask.getTransportProtocol(AS1SeedTask.java:342)
at oracle.tip.seed.AS1SeedTask.createAS1(AS1SeedTask.java:483)
at oracle.tip.seed.AS1SeedTask.createAS1ExchangeProtocol(AS1SeedTask.java:423)
at oracle.tip.seed.AS1SeedTask.createBusinessProtocol_EDI_EDI_X12_AS1(AS1SeedTask.java:530)
at oracle.tip.seed.AS1SeedTask.doWork(AS1SeedTask.java:104)
at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
at oracle.tip.seed.AS1SeedDriver.main(AS1SeedDriver.java:80)
java.lang.Exception: No TransportProtocol found for the given name and revision 'EMail' '1.0'
at oracle.tip.seed.AS1SeedTask.getTransportProtocol(AS1SeedTask.java:342)
at oracle.tip.seed.AS1SeedTask.createAS1(AS1SeedTask.java:483)
at oracle.tip.seed.AS1SeedTask.createAS1ExchangeProtocol(AS1SeedTask.java:423)
at oracle.tip.seed.AS1SeedTask.createBusinessProtocol_EDI_EDI_X12_AS1(AS1SeedTask.java:530)
at oracle.tip.seed.AS1SeedTask.doWork(AS1SeedTask.java:104)
at oracle.tip.seed.SeedDriver.processTasks(SeedDriver.java:222)
at oracle.tip.seed.SeedDriver.go(SeedDriver.java:283)
------------------------------------------Make sure that no oracle processes are running on windows, stop all services again and use the task manager to kill any oracle process that is running. But first read de README.txt that you have with your patch, there is all the steps you need to follow to perform that installation.
Message was edited by:
user637951 -
Getting error while applying psu patch on 11.2.0.2.0
Hi All,
I am getting one error while applying psu july patch on top of 11.2.0.2.0
If anybody has the solution please answer:
Below is the code sample:
[oracle@host01 16619893]$ opatch prereq CheckConflictAgainstOHWithDetail -phBase Dir ./16619893
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
PREREQ session
Oracle Home : /u002/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u002/app/oraInventory
from : /u002/app/oracle/product/11.2.0/dbhome_1/oraInst.loc
OPatch version : 11.2.0.3.4
OUI version : 11.2.0.2.0
Log file location : /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/ opatch2013-06-28_02-08-44AM_1.log
Invoking prereq "checkconflictagainstohwithdetail"
Prereq "checkConflictAgainstOHWithDetail" passed.
OPatch succeeded.
[oracle@host01 16619893]$ opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /u002/app/oracle/product/11.2.0/dbhome_1
Central Inventory : /u002/app/oraInventory
from : /u002/app/oracle/product/11.2.0/dbhome_1/oraInst.loc
OPatch version : 11.2.0.3.4
OUI version : 11.2.0.2.0
Log file location : /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/ opatch2013-06-28_02-10-02AM_1.log
Verifying environment and performing prerequisite checks...
Prerequisite check "CheckActiveFilesAndExecutables" failed.
The details are:
Following executables are active :
/u002/app/oracle/product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
UtilSession failed: Prerequisite check "CheckActiveFilesAndExecutables" failed.
Log file location: /u002/app/oracle/product/11.2.0/dbhome_1/cfgtoollogs/opatch/o patch2013-06-28_02-10-02AM_1.log
OPatch failed with error code 73
[oracle@host01 16619893]$ ps -ef |grep libclntsh.so.11.1
oracle 15943 15446 0 02:11 pts/3 00:00:00 grep libclntsh.so.11.1
[oracle@host01 16619893]$
Why I am getting that error? And how to check wheather lobclntsh.so.11.1 is running and how to kill it?
Thanks in advance.See the below link
Oracle DBA and RAC DBA Expert: Reason: Cannot apply patch due to fatal error & CheckActiveFilesAndExecutables failed
I hope it resolves your issue.
Regards,
http://www.oracleracexpert.com -
Oracle Security Patch Error while applying --The filename, directory name,
Hello,
I am running into strange error while applying Oracle Security Patch 68 by using Opatch.
Supposedly, All the environment variables are set properly.
ACTIVE_STATE_PERL=true
DBMS_TYPE=ORA
dbs_ora_tnsname=YBQ
JAVA_HOME=C:\jdk1.3.1_10
OPATCH_DEBUG=TRUE
ORACLE_HOME=E:\oracle\ora92
ORACLE_SID=YBQ
Path=E:\oracle\OPatch;C:\jdk1.3.1_10\bin;E:\oracle\Perl\bin;E:\oracle\ora92\jre\1.4.2\bin\client;E:\oracle\ora92\jre\1.4.2\bin;E:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\Common Files\VERITAS Shared;\NetBackup\bin;C:\Program Files\Windows Resource Kits\Tools\;C:\Program Files\Support Tools\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;E:\usr\sap\YBQ\SYS\exe\run
Installed Active Perl. latest version
downloaded Opatch 1.0.0.50
and the patch number 3738339
I went to that directory and run the command :
perl opatch.pl apply
It started of well.
OPatch version is: 1.0.0.0.50
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = E:\oracle\ora92
Location of Oracle Inventory = E:\oracle\ora92\inventory
Oracle Universal Installer shared library = E:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "E:\oracle\ora92\jre\1.4.2\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = E:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
find under OH/oui/jlib
found OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;.:E:\oracle\ora92\jlib\srvm.jar" opatch/O2O "e:\oracle\ora92" "E:\oracle\ora92\oui" opatch.pl 1.0.0.0.50"
Result:
----- DEBUG is ON -------
oracle.installer.startup_location will be set to E:\oracle\ora92\oui
oracle.installer.oui_loc will be set to E:\oracle\ora92\oui
oracle.installer.scratchPath will be set to /tmp
opatch.local_node_only is OFF
retryOption is ON: 10
delayOption is ON: 30
Few more stuff here .. not pasting the entire contents
System Command: ""E:\oracle\ora92\jre\1.4.2\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2 -Dopatch.debug=true -classpath "E:\oracle\ora92\oui\jlib\OraInstaller.jar;E:\oracle\ora92\oui\jlib\srvm.jar;jlib\opatch.jar;E:\oracle\ora92\oui\jlib\xmlparserv2.jar;E:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "E:\oracle\ora92\oui" "e:\oracle\ora92" opatch.pl 1.0.0.0.50 3738339 "3741539 3528282 3516951 3622875 3668572 3371796 3239873 3356103 3543125 3666502 2800494 2824035 2964252 3617042 3320622 3571233 3253770 3492040 3566469 3354470 3625370 3583686 3150750 3617519 3635177 3597640 3749394 3542588 3698501 2954891 2918138 3559212 3518909 3412818 3430832 3172282 3358490 3637624 3458446 3179637 2810394 3668224 3609791 3566813 3475932 2338704 3412136 3388633 3540576 3571226 3575743 2690205 3240280 3509265 3177513 3575747 3811906 3554319 3752406 3323435 " E:\3738339\etc\config\actions"
Result:
opatch.pl version: 1.0.0.0.50
Copyright (c) 2001-2004 Oracle Corporation. All Rights Reserved.
The filename, directory name, or volume label syntax is incorrect.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.
Now there is no problem with executing the last java program in the same prompt by removing the first and the last double quote "
Please advise.
Thanks in advance.hi somnath,
this is the portal content management forum. for your database question please use the database forums:
http://forums.oracle.com/forums/index.jsp?cat=18
thanks,
christian -
Ad Path worker error while applying patch NO 7429271
Hi All,
I am not able to apply following patch NO 7429271( AD Mini pack) to Oracle application 11.5.9 which is at AD patch level 11i.AD.H
I am getting the following error in ad worker log and the patch does not continue from workers stage here is a log from one of the workers..
*********** Start of AD Worker session *************
AD Worker version: 11.5.0
AD Worker started at: Sat Sep 18 2010 15:53:34
APPL_TOP is set to d:\oracle\prodappl
Worker id = 1
Started by: adpatch
NLS_LANG value from the environment is : AMERICAN_AMERICA.AR8ISO8859P6
NLS_LANG value for this AD utility run is : AMERICAN_AMERICA.AR8ISO8859P6
AD Worker error:
aiurcl(): Discrepancy detected in restart file:
d:\oracle\prodappl\admin\PROD\restart\adpinit.rf9
Line 4 from file = 'Prompt for mailto'
Line to compare = 'Apply mode Setting'
You should check the file
d:\oracle\prodappl\admin\PROD\log\adwork001.log
for errors.
I followed these metalink documents with no use
Note: 358943.1 - Ad Worker Error:Aiurcl():Discrepancy Detected In Restart File:Adpinit.rf9
Note: 159127.1 - Discrepancy Detected in Restart File
Note: 362581.1 - Restart discrepancy in aidrrl3() error while applying a Patch
Note: 736623.1 - How To Take Quick Action On The Relink Failed On The Windows Platform? Adrelink.Sh Adpatch And Adworker Exiting With Status 1
I am trying to apply AD mini pack for my installtation...
Early Repose is highy appreciated.................................
Regards
DVS Shiv Kumar
Edited by: user6650876 on Sep 18, 2010 8:02 AMHi,
Any other error messages in the failed worker log file?
Have you tried to apply the patch from the beginning and see if it works?
Please see --> How To Take Quick Action On The Relink Failed On The Windows Platform? Adrelink.Sh Adpatch And Adworker Exiting With Status 1 [ID 736623.1]
If none of the docs helps, please log a SR.
Thanks,
Hussein -
Error while applying LM-tools patch using JSPM
hi all,
I got error while applying LM-Tool patch using JSPM. following is the error log. How can i rectify it. please help.
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE"
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE"
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE"("NODE_ID" RAW(16) NOT NULL, "PARENT_I
D" RAW(16) , "NODE_TYPE" NUMBER(10) DEFAULT 0 NOT NULL, "NAME" NVARCHAR2(30) DE
FAULT ' ' NOT NULL, "TS" TIMESTAMP NOT NULL, "USER_ID" NVARCHAR2(30) )
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE"("NODE_ID" RAW(16) NOT NULL, "PARENT_I
D" RAW(16) , "NODE_TYPE" NUMBER(10) DEFAULT 0 NOT NULL, "NAME" NVARCHAR2(30) DE
FAULT ' ' NOT NULL, "TS" TIMESTAMP NOT NULL, "USER_ID" NVARCHAR2(30) )
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_R" ON "BC_MID_TREE"("PARENT_ID")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_R" ON "BC_MID_TREE"("PARENT_ID")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE UNIQUE INDEX "BC_MID_TREE_U" ON "BC_MID_TREE"("PARENT_ID",
"NAME")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE UNIQUE INDEX "BC_MID_TREE_U" ON "BC_MID_TREE"("PARENT_ID",
"NAME")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE" ADD PRIMARY KEY ("NODE_ID") NOT DEFERRA
BLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE" ADD PRIMARY KEY ("NODE_ID") NOT DEFERRA
BLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Next archive objec
t : dbtables/BC_MID_TREE_ITEM.gdbtable
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Next archive objec
t : dbtables/BC_MID_TREE_ITEM.gdbtable
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: <<< Analyze table
BC_MID_TREE_ITEM >>>
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: <<< Analyze table
BC_MID_TREE_ITEM >>>
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: predefined action
is: >>>DROP_CREATE<<<
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: predefined action
is: >>>DROP_CREATE<<<
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Action: DROP_CREAT
E
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Action: DROP_CREAT
E
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: DROP TABLE "BC_M
ID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: CREATE TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "NODE_ID" RAW(16) NOT NULL,
Mar 29, 2010 12:49:57... Info: "ITEM_ID" RAW(16)
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TRE
E_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "ITEM_ID"
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: ALTER TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: ADD PRIMARY KEY ("NODE_ID")
Mar 29, 2010 12:49:57... Info: NOT DEFERRABLE INITIALLY IMMEDIATE ENABLE VALIDAT
E
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: DROP TABLE "BC_M
ID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: CREATE TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "NODE_ID" RAW(16) NOT NULL,
Mar 29, 2010 12:49:57... Info: "ITEM_ID" RAW(16)
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TRE
E_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "ITEM_ID"
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: ALTER TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: ADD PRIMARY KEY ("NODE_ID")
Mar 29, 2010 12:49:57... Info: NOT DEFERRABLE INITIALLY IMMEDIATE ENABLE VALIDAT
E
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE_ITEM"("NODE_ID" RAW(16) NOT NULL, "ITE
M_ID" RAW(16) )
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE_ITEM"("NODE_ID" RAW(16) NOT NULL, "ITE
M_ID" RAW(16) )
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TREE_ITEM"("ITEM_ID"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TREE_ITEM"("ITEM_ID"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE_ITEM" ADD PRIMARY KEY ("NODE_ID") NOT DE
FERRABLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE_ITEM" ADD PRIMARY KEY ("NODE_ID") NOT DE
FERRABLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Analysis and adjus
tment of tables successfully executed
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Analysis and adjus
tment of tables successfully executed
Mar 29, 2010 12:49:57... Info: Finished successfully: development component 'tc/
slm/mid/dd'/'sap.com'/'MAIN_APL70P18_C'/'2712380'/'0', grouped by
Mar 29, 2010 12:49:57... Info: Starting to save the repository
Mar 29, 2010 12:49:57... Info: Finished saving the repository
Mar 29, 2010 12:49:57... Info: Starting: Update: Selected development component
'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_APL70P18_C'/'2712383'/'0' u
pdates currently deployed development component 'tc/archtech/browser/viewer/loca
tor'/'sap.com'/'MAIN_APL70VAL_C'/'1496536'/'0'.
Mar 29, 2010 12:49:57... Info: SDA to be deployed: /usr/sap/IRX/DVEBMGS02/SDM/ro
ot/origin/sap.com/tc/archtech/browser/viewer/locator/MAIN_APL70P18_C/0/2712383/t
carchtechbrowserviewerlocator.sda
Mar 29, 2010 12:49:57... Info: Software type of SDA: J2EE
Mar 29, 2010 12:49:57... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE A
pplication) *****
Mar 29, 2010 12:49:58... Info: Starting cluster instance processes.
Mar 29, 2010 12:50:03... Info: Starting the instance JC_PRDCIXI_IRX_02 running o
n host PRDCIXI_svc
Mar 29, 2010 12:50:03... Info: Starting the instance JC_PRDCIXI_IRX_02 processes
. The instance is running on host PRDCIXI_svc
Mar 29, 2010 12:50:03... Info: Starting the process dispatcher
Mar 29, 2010 12:50:03... Info: Starting the process server0
Mar 29, 2010 6:49:58 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE App
lication) *****
Mar 29, 2010 6:49:58 PM Error: Aborted: development component 'tc/archtech/brow
ser/viewer/locator'/'sap.com'/'MAIN_APL70P18_C'/'2712383'/'0', grouped by softwa
re component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P19_C'/'1000.7.00.19.0.200904271432
29''/'0':
SDM could not start the J2EE cluster on the host PRDCIXI! The online deployment
is terminated.
A timeout occured during the cluster running verification.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
oyerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Mar 29, 2010 6:49:58 PM Info: Starting to save the repository
Mar 29, 2010 6:49:59 PM Info: Finished saving the repository
Mar 29, 2010 6:49:59 PM Info: Starting: Update: Selected software component 'LM
-TOOLS'/'sap.com'/'MAIN_APL70P19_C'/'1000.7.00.19.0.20090427143229''/'0' updates
currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P14_C'/'1
000.7.00.14.1.20080124101556''/'0'.
Mar 29, 2010 6:49:59 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'
/'MAIN_APL70P19_C'/'1000.7.00.19.0.20090427143229''/'0':
Failed deployment of SDAs:
development component 'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_APL70
P18_C'/'2712383'/'0' : aborted
Please, look at error logs above for more information!
Mar 29, 2010 6:49:59 PM Info: Starting to save the repository
Mar 29, 2010 6:49:59 PM Info: Finished saving the repository
Mar 29, 2010 6:49:59 PM Info: Restoring the state of the instance (JC_PRDCIXI_I
RX_02) process server0 from Stopped to Running
Mar 30, 2010 12:50:00... Error: Received exception when restoring Engine state:
A timeout occured during the cluster state restore verification.
Mar 30, 2010 12:50:00... Error: -
At least one of the Deployments
failed -
Regards,
PriyaHi Priya,
As per your error message, there is problem with the SDM is not starting after finishing deployment on SAP J2EE Engine Deployment. Development component are not deployed properly due to error message
> SDM could not start the J2EE cluster on the host PRDCIXI! The online deployment is terminated. A timeout occured during the cluster running verification. P
Please check the default timeout and increased as requred.
Please check the below thread to rectify this issue.
SDM Troubleshooting : http://help.sap.com/saphelp_nw04/helpdata/de/76/fb72ec091f4bf8a2d8ba321bb7e8d9/frameset.htm
SDM Troubleshooting : https://cw.sdn.sap.com/cw/docs/DOC-29627:
Hope it helps
Regards
Arun -
Relinking failed while Applying VCP 12.1.3.8 PATCH (Patch -14247039)
Hi Hussain/All,
Apps : 12.1.3
DB : 11.2.0.3
OS : Linux 64bit
While Applying VCP 12.1.3.8 PATCH (Patch -14247039), got relinking failed.... continued by typing Yes as of now.
========================
adrelink is exiting with status 1
End of adrelink session
Date/time is Sat Feb 16 22:24:43 EDT 2013
Line-wrapping log file for readability ...
Done line-wrapping log file.
Original copy is /d01/oracle/apps/apps_st/appl/admin/oracle/log/adrelink.lsv
New copy is /d01/oracle/apps/apps_st/appl/admin/oracle/log/adrelink.log
An error occurred while relinking application programs.
Continue as if it were successful [No] :
=============================
Thanks,
AbdullahAs it is a big file.. pasting some part of it.. adrelink.log file
collect2: ld returned 1 exit status
make: *** [d01/oracle/apps/apps_st/appl/msc/12.0.0/bin/MSCXGCAL] Error
1
Done with link of msc executable 'MSCXGCAL' on Sat Feb 16 22:24:34 EDT 2013
Relink of module "MSCXGCAL" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /d01/oracle/apps/apps_st/appl/msc/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'msc' on Sat Feb 16 22:24:34 EDT 2013
Starting link of product 'mso' on Sat Feb 16 22:24:34 EDT 2013
Current product is mso
Current product TOP is $MSOTOP
Current prodarea is /d01/oracle/apps/apps_st/appl/mso/12.0.0
Relinking module 'MSONEW' in product mso ...
make -f /d01/oracle/apps/apps_st/appl/admin/oracle/out/link_mso_14501.mk
/d01/oracle/apps/apps_st/appl/mso/12.0.0/bin/MSONEW
Starting link of mso executable 'MSONEW' on Sat Feb 16 22:24:34 EDT 2013
g++ -m32 -L/d01/oracle/apps/tech_st/10.1.2/lib
-L/d01/oracle/apps/tech_st/10.1.2/lib/stubs -lclntsh -o
/d01/oracle/apps/apps_st/appl/mso/12.0.0/bin/MSONEW \
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/msonew.o \
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
/d01/oracle/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
/d01/oracle/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a \
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libschedule.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolveriim.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcertext.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolver.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcert.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libilocplex.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libcplex.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libcplex.a \
/d01/oracle/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a
-lsql10 -lclntsh `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
`.gnu.linkonce.t._ZN17SCOProfileOptionsC1Ev' referenced in section `.rodata'
of /d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdl.o):
defined in discarded section `.gnu.linkonce.t._ZN17SCOProfileOptionsC1Ev' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdl.o)
`.gnu.linkonce.t._ZN7OmValue3setEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomitemorgbkt.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3setEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomitemorgbkt.o
`.gnu.linkonce.t._ZN7OmValue3setEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3setEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomprodresuse.o
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresourcebkt.
o): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresourcebkt.
o)
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomsupplierbkt.
o): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomsupplierbkt.
o)
`.gnu.linkonce.t._ZN7OmValue3setEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdemandsatflo
w.o): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3setEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomdemandsatflo
w.o)
`.gnu.linkonce.t._ZN7OmValue3addEd' referenced in section `.rodata' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresconsume.o
): defined in discarded section `.gnu.linkonce.t._ZN7OmValue3addEd' of
/d01/oracle/apps/apps_st/appl/mso/12.0.0/lib/libmso.a(msopomresconsume.o
collect2: ld returned 1 exit status
make: *** [d01/oracle/apps/apps_st/appl/mso/12.0.0/bin/MSONEW] Error 1
Done with link of mso executable 'MSONEW' on Sat Feb 16 22:24:39 EDT 2013
Relink of module "MSONEW" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /d01/oracle/apps/apps_st/appl/mso/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'mso' on Sat Feb 16 22:24:39 EDT 2013
Starting link of product 'wip' on Sat Feb 16 22:24:39 EDT 2013
Current product is wip
Current product TOP is $WIPTOP
Current prodarea is /d01/oracle/apps/apps_st/appl/wip/12.0.0
Relinking module 'WICMEX' in product wip ...
make -f /d01/oracle/apps/apps_st/appl/admin/oracle/out/link_wip_14543.mk
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
Starting link of wip executable 'WICMEX' on Sat Feb 16 22:24:39 EDT 2013
g++ -m32 -L/d01/oracle/apps/tech_st/10.1.2/lib
-L/d01/oracle/apps/tech_st/10.1.2/lib/stubs -lclntsh -o
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wimcmex.o \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wicmex.o \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/wps/12.0.0/lib/libwps.a \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libschedule.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolveriim.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcertext.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolver.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcert.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/eng/12.0.0/lib/libeng.a \
/d01/oracle/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a \
/d01/oracle/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a \
/d01/oracle/apps/apps_st/appl/inv/12.0.0/lib/libinv.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a \
-lsql10 -lclntsh `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
chmod 755 /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
echo mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMEX
echo
Done with link of wip executable 'WICMEX' on Sat Feb 16 22:24:42 EDT 2013
Done relinking module WICMEX in product wip
Relinking module 'WICMLX' in product wip ...
make -f /d01/oracle/apps/apps_st/appl/admin/oracle/out/link_wip_14572.mk
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
Starting link of wip executable 'WICMLX' on Sat Feb 16 22:24:42 EDT 2013
g++ -m32 -L/d01/oracle/apps/tech_st/10.1.2/lib
-L/d01/oracle/apps/tech_st/10.1.2/lib/stubs -lclntsh -o
/d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wimcmlx.o
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/wicmlx.o \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/wps/12.0.0/lib/libwps.a \
/d01/oracle/apps/apps_st/appl/wip/12.0.0/lib/libwip.a \
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libschedule.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolveriim.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcertext.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libsolver.a
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/ilog/6.2/libconcert.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/eng/12.0.0/lib/libeng.a \
/d01/oracle/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a \
/d01/oracle/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a \
/d01/oracle/apps/apps_st/appl/inv/12.0.0/lib/libinv.a \
/d01/oracle/apps/apps_st/appl/bom/12.0.0/lib/libbom.a \
/d01/oracle/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a \
-lsql10 -lclntsh `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 `cat /d01/oracle/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10 -lncrypt10
-lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10
-lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10
-lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10
-lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/d01/oracle/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so
/d01/oracle/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
chmod 755 /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
echo mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
mcs /d01/oracle/apps/apps_st/appl/wip/12.0.0/bin/WICMLX
echo
Done with link of wip executable 'WICMLX' on Sat Feb 16 22:24:43 EDT 2013
Done relinking module WICMLX in product wip
Done with link of product 'wip' on Sat Feb 16 22:24:43 EDT 2013
adrelink is exiting with status 1
End of adrelink session
Date/time is Sat Feb 16 22:24:43 EDT 2013
********************************************************** -
Error while applying the Service Policy
Hi,
I am getting the below error while applying the service policy to the Interface.
I have set the mpls exp 4 as well as want to limit the bandwidth to 1Mbps
PE#sh policy-map setexp-GBoIP
Policy Map setexp-GBoIP
Class GBoIP-traffic
set mpls experimental imposition 4
police cir 1024000 bc 32000
conform-action transmit
exceed-action drop
PE(config-if)#int vlan 2007
PE(config-if)#service-policy input setexp-GBoIP
QoS-ERROR: Addition/Modification made to policymap setexp-GBoIP and class GBoIP-traffic is not valid, command is rejected
As well as I have created new clas--map with priority and Bandwidth and applied in output direction, I got the belwo error while applying the Service policy in
PE(config-if)#service-policy out TEST
bandwidth command is not supported in output direction for this interface
PE(config-if)#service-policy output TEST
priority command is not supported in output direction for this interface
Any idea why so ?
Thanks in Advance.
Regards,
NileshCheck the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein -
Error while applying J2EE SP14 for 640 system
Hi,
I am facing issue while applying J2EE SP14 for 640 system. The current level is SP9. Below is the error. Can you recommand any resolution for the same.
ERROR 2005-03-04 14:23:47
CJS-20076 Error while retrieving the mode of the J2EE Engine. See output of logfile C:\Program Files\sapinst_instdir\PATCH\MSS/getEngineMode.log: 'Error while loading BatchConfig C:\Program Files\sapinst_instdir\PATCH\MSS/getSafeMode.xml definition file.
java.lang.Exception: Unknown Task information
at com.sap.engine.configtool.batch.descriptor.BatchConfigDescriptorDocument.readDescriptorFromDocument(BatchConfigDescriptorDocument.java:121)
at com.sap.engine.configtool.batch.descriptor.BatchConfigDescriptorDocument.readDescriptorFromDocument(BatchConfigDescriptorDocument.java:94)
at com.sap.engine.configtool.batch.descriptor.BatchConfigDescriptor.loadFromFile(BatchConfigDescriptor.java:66)
at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:74)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:78)
WARNING 2005-03-04 14:23:47
The step checkIfSafeModeIsEnabled with step key ApplySupportPackage|ind|ind|ind|J2EE_Engine|6.30|0|PatchJ2eeEngine|ind|ind|ind|J2EE_Engine|6.30|0|checkIfSafeModeIsEnabled was executed with status ERROR.hi Atul,
Welcome to SDN!
This problem occurs due to unexpectedly high CPU usage. Check the SAP OSS Notes (from Service Market Place) <a href="https://websmp203.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200000309362004">743207</a> and <a href="https://websmp203.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200000300342004">742395</a>
They will help you to solve the problem.
Regards
ak
Maybe you are looking for
-
SX280 HS no longer recognized as connected to any computer/ device
I purchased the brand new PowerShot SX280 HS three weeks ago. Being a person that actually reads directions and owners manuals, I followed the Getting Started booklet exactly as stated to connect the camera to my Win 7 (64-bit) PC, and it worked well
-
[SOLVED]kdeplasma-applets-menubar doesn't work.
I've just installed the following applications: kdeplasma-applets-menubar, libdbusmenu, libdbusmenu-qt, appmenu-gtk, appmenu-qt. But kdeplasma-applets-menubar doesn't work on my KDE4.10. The menu still show in the window and the a
-
HOw do I reinstall itunes after error message "mobile devise failed"?
-
Unloading point and Goods recipient in Purchase Requisition
Hi, I have a requirement to update Good Recipient and Unloading point in Purchase requisition. I am using BAdI ME_PROCESS_REQ_CUST and PROCESS_ACCOUNT Method. in PROCESS_ACCOUNT method I am using IM_ACCOUNT_REF and GET_DATA and SET_DATA methods. and
-
been a long time since i have posted or even read anything here. sort of fallen off the photography wagon. ran into a problem today that was familiar to me, so thought i would give it a shot here. i have a canon EOS 1D MkII, a venerable body that has