Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
        Ahmad

Similar Messages

  • Assign Business System in Integration Directory

    Hi all,
    i have basic question.
    in my ID, there are some configuration scenarios.
    for example, the left side look like,
    in case,one of Business System created on SLD was assigned to one of configuration scenarios,
    i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
    can i assign BS1 to several configuration  scenarios?
    or should i create Main scenario in order to define communication channel?
    thanks in advance
    venjamin

    Hi venjamin
    Yes, you can assign the same business system to different configuration scenarios.
    to do this there are 2 ways.
    1. Open the cofiguration scenario to which the business system has already been  assigned.
    Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
    assign your business system.
    2. Select the objects tab>service without party> business system> your business system> right click-->
    assign to scenario and then select your scenario.
    Hope this helps,
    Regards,
    bhavesh
    Message was edited by: Bhavesh Kantilal

  • No business system in integration directory error...urgent pl

    Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
    When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
    What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
    Thanks.

    Hi,
    make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
    If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
    Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
    Did this fix the problem?
    Regards,
    Hans Christian

  • Importing new business systems into Integration Directory PI 7.1

    Team SDN,
    Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version).  There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
    Please share with members if wht are the new changes in PI 7.1 work proceses  like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
    Thanks SDN.

    Hi Madhu,
    If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
    refer below link..
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
    Regards,
    Raj

  • CIM_ERR_ALREADY_EXISTS: Error while creating Business System

    Hi,
    I am getting following error while creating Business System in SLD, the Technical System is already created from RZ70 transaction in the IDES system
    Error Creating business system: CIM_ERR_ALREADY_EXISTS: Instance already exists://inbbssun01/sld/active:SAP_LogicalALESystem.CreattionClassName="SAP_LogicalALESystem", Name = "LSIDES800.SystemName.800.SystemName.IDS.SystemNumber.0020224902.SystemHome.idesecc"
    Thanks,
    RP

    Hi,
    This error means that a business system with this name(or associated with this technical system) is already there in SLD.
    You need to check that before you try creating it (might be someone else have created it before)
    Updated
    If you have created and deleted a business system and then trying to recreate one then you need to delete all the instance of it from Content Management (in SLD)
    Regards
    Suraj
    Edited by: S.R.Suraj on Nov 9, 2009 12:34 AM

  • Business Service (vs) Business System in Integration Directory.

    Hi to all,
    I want to know the best practice for using Business Service and Business System, Then
    When we should go for Business Service instead of Business System in Integration directory? Can any one give me suggestion for me .
    Thanks,
    Vikram.C.

    Hi Vikram,
    >>Business System: It represent a specific application System in the SLD.
    Business Service: It represents an abstract service and are used in Cross    Company Process.
    >>When we should go for Business Service instead of Business System in Integration directory?
    Its purely used in the Cross Company Process, i.e. whenever you are communicating with external system.
    regards

  • Not able to import business system in Integration Directory

    Dear all,
    Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
    Now in the post instalaltion activites.
    I have changed the exchange profile parameter
    SLD connection.
    And other post installation activites succesfully.
    But I am not able to import the business system in Integration director. It throws an error by mentioning.
    *Access to object list of type business system using the internalEOA service business system accessor failed *
    Here we are maintaing a central SLD and hence i created the service users with specific roles.
    SLDcheck is working fine and it dispalying the businees system as well.
    I confirmed that the user and password are same in XI and SLD system,
    But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
    Is this the problem or am i missing out somewhere?
    FYI: The users are not locked.
    Kindly suggest me and it will be greatful if i get immediate reply.
    Thanks and regards
    Vijay kumar G

    Hi Vijay,
    It looks like the problem is with the SLD.
    Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
    Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
    Regards,
    Lim...

  • Cannot see business system in integration directory.

    Hi all,
    I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
    I have configured the scenario as given in the exercise scenario in the integration repository.
    In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
    p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
    Thanks,
    Joe.

    Looks like the much abused points system is having a bad day on SDN
    I am glad actually - will keep the spammers away
    A Thank You is all that drives and should drive SDN
    Regards
    Bhavesh

  • Error while assigning Logical System to Client

    Hi,
    I am trying to perfomr data transfer suing Idoc from SAP R/3 to PI.
    For this, I have created a logical system PD1CLNT100.
    But when I try to assign the client 100 to this Logical system through SALE, I ge the following error
    "An entry already exists with the same key SALE"
    but I am unable to see this entry in the client list in SALE.
    Please tell me where is it picking the entry from?
    regards,
    Piyush

    Hi  Piyush Mathur SAP   
    Check once again for Client 100 ... there willl be entry  (Assign the Logical System to Client)
    Check in table  V_TBDLS  for Logical Systems..
                             T000         for Clients
    Log out from the system and log in once again and check it....
    i hope Above info helps you
    Thanks
    Ramesh

  • Error while assigning source system to SAP Remote cube

    I need to do a query using remote cube and the source sys is flat file.
    it wont let me assign the source system to the remote cube.
    the r/3 system icon is seen next to the remote cube technical  name...
    I can't  see my flatfile source system
    can somebody help me.

    Hello Kiran,
    I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
    You can use Virtual Providers in these different scenarios
    Virtual Providers based on DTP => used for SAP source systems
    Virtual Providers based on BAPI => used for non-SAP or external systems
    Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
    Use InfoObects as Virtual Providers
    Your case is none of these.
    More details can be found under this link:
    http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm

  • Problem Assigning Business Systems

    Hi,
      Landscape: New XI 3.0 SR1 Installation, W2K, oracle.
    SLD: on a separate server with ABAP+J2ee. ABAP datastore for UME. Updated with new CIM, CR content.
    Followed oss note: 768148 - Using a separate SLD for XI
    We completed all the settings as per post-installation guide and XI configuration guide. We were able to connect & create the technical and business systems for XI and R.3 ECC 5.0 in the SLD.
    SLDCHECK in XI server is fine, and shows the correct information about the SLD.
    But when I am trying to assign a business system in Integration Directory - Service without third party, in the following wizard I am getting an error message
    "Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed"
    Any help would be appreciated

    Hi Rao,
    The following links u may find it useful.
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    http://www.sap-press.com/downloads/h982_sample_chapter.pdf
    *Please Reward points if u find it useful.
    regards,
    gyanaraj

  • Integration Server not found while creating  Business system

    Hi all,
    I m facing following problems in XI.
            While creating Business system, "integration server" name  is not displayed in the drop down box. and
    I m getting the error  "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
    thanks and regards
    vijay

    Hi Vijay
    Please check if you have assigned the correct Integration server to the business system in SLD.
    and for the the software component error check if the user has required access (roles assigned) for importing the software component.
    Thanks
    -Mitesh

  • I have error while testing the system created from a sap business objects template in SAP portal

    I have error while testing the system created from a sap business objects template in SAP portal. Error text:
    com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
    I configure integration SAP portal and SAP BW system. All system requirements are complied.
    Environment
    SAP Business Objects 4.0
    SAP BW 7.31
    1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
    2.     Next I setting integration SAP PORTAL with SAP BW system
    3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
    4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
    5. Select Export entry button and binary format file certificate for download. Press download.
    6.     Save certificate file in local PC folder
    In next step need export certificate file to SAP system. Sequence of step:
    1.       Run STRUSTSS02 transaction .
    2.       Chose certificate ->import.
    3.       Select downloaded certificate file
    4.       Select Add to certificate list button and Add to ACL button
    5.       Inter System ID and Client(000)
    6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
    7.       Result – downloaded iview.
    8.       In next step I create system from template. System administration->system landscape.
    9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
    10.   When I created the system and test the connection error occurred: See screen_3
    This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

    Did you find a solution?

  • Idoc adapter -  No service for a system in Integration directory

    Hi,
    I'm trying to send a custom IDOC from an R3 system to an XI instance.
    All settings that I can see using transactions IDX1 IDX2 and IDX5 seems to be correct, but the IDOC doesn't reach the IS.
    SM58 in the sender system reports the error:
    "No service for system SAPXXX, client nnn in Integration Directory".
    Do I have to create the service? How?
    Thanks for any suggestion.
    Simona

    Hi Simona,
    you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
    In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
    Regards, Udo

  • How to add buisness system in Integration directory -objects

    Hi All,
    I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
    so in the integration directory,
    objects--->service without party >buisness system>
    in the buisness system , whatever buisness system i created the  is not found.
    how to add buisness system into integration directory -- objects.
    Regards,
    vinoth.

    Hi,
    go to integration directory,
    objects--->service without party >buisness system>
    select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
    If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
      and do the same process again..
    Regards,
    Venu.

Maybe you are looking for