Error while assigning Operating concer to Controlling Area

Hi...
while I am trying to assign operating concern to controlling area, the system is showing the following error message.
Diagnosis
Controlling area 7500 and operating concern 7500 have different fiscal year variants (01 and K4). However, for cost center assessment, settlement, and many other types of postings to Profitability Analysis, the controlling area and the operating concern must have identical fiscal year variants, otherwise error messages or serious data inconsistencies can occur.
But i already changed fiscal year variant from K4 to 01 in Operating concern and i run the generate operating concern environment also. still the system is showing the same error message.
Is there anything more i need to do after changing fiscal year variant in Operting concern.
Please help me.
Thank you,
Regards,
Santosh

I have got the solution.
Thank you,
Regards,
Santosh

Similar Messages

Error while assign doc type to sale area

hi,
     while assigning a sale area to a doc type i am getting the following error, " define the sale area(XXXX/YY/zz) as a general sale area? i have alreadly done "set up sale area" what is general sale area and how to do it? need help.
regards
leo

hi
The Assignment of Sales Areas to Sales Documents
There may be a need to assign sales documents to specific sales areas. For example, a different
sales document is used for all sales orders from a specific sales organization.
Transaction Code OVAZ
You may assign reference sales organizations as well as reference distribution channels and divisions. Do not confuse this referencing with the assignment of common distribution channels and common divisions. The referencing done here is only used by the system to determine which sales documents are permitted for which sales areas.
If all sales document types can be used by all sales areas, leave the assignment fields blank.
check your sales area in
Set up sales area - Enterprise Structure ® Assignment ® Sales and Distribution ® Set up sales area
T-code: OVXG
Also check the following setting
OVAM - To Combine distribution channels Sales Document Types     -- Sales and Distribution ® Sales ® Sales Documents ® Sales Document Header ® Assign Sales Area To Sales Document Types -
choose Combine distribution channels.
OVAN - To Combine division to Sales Document Types      - Sales and Distribution ® Sales ® Sales Documents ® Sales Document Header ® Assign Sales Area To Sales Document Types -
choose Combine divisions
OVR1 - Define Common Distribution Channels - Sales and Distribution ® Master Data ® Define Common Distribution Channels
OVR2 - Define Common Divisions - Sales and Distribution ® Master Data ® Define Common Divisions
Regards
Vishal
Edited by: WISH on May 6, 2008 7:57 AM

BCD_FIELD_OVERFLOW error while assigning value to dynamic work area

Hi guys,
            I am trying following code --it uses dynamic table concept.
       LABSTD2 TYPE P DECIMALS 1,
       LABST_2 TYPE P DECIMALS   1,
       LABST_12 TYPE P DECIMALS 1,
       T_ARTMAS-LABST_12 = T_ARTMAS-LABSTD1 + T_ARTMAS-LABSTD2.
       ASSIGN COMPONENT 'LABST_12' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
       <DYN_FIELD> = T_ARTMAS-LABST_12.
Value in T_ARTMAS-LABST_12 in debug was 14690.0....still it gave following error-----
Runtime Error       BCD_FIELD_OVERFLOW
Except.                CX_SY_CONVERSION_OVERFLOW
Even i changed decleartion as follows
LABST_12 TYPE P lenght 10 DECIMALS 1,
Still it is giving same problem ...
Kindly help.

Hi, I think it has nothing to do with an overflow but something with the code. Try this simple (rather stupied) code:
TYPES: BEGIN OF ty_line,
        fld1      TYPE p DECIMALS 1,
        fld2      TYPE p DECIMALS 1,
        fld3      TYPE p DECIMALS 1,
      END OF ty_line.
DATA lv_rec       TYPE ty_line.
DATA lv_count(1) TYPE n.
DATA lv_fld1      TYPE p DECIMALS 1.
DATA lv_fld2      TYPE p DECIMALS 1.
DATA lv_fld3      TYPE p DECIMALS 1.
DATA lv_field     TYPE string.
FIELD-SYMBOLS: <fs_fld> TYPE any.
BREAK-POINT.
lv_fld1 = 15211444 / 10.
lv_fld2 = 54879072 / 10.
lv_fld3 = lv_fld1 + lv_fld2.
DO 3 TIMES.
lv_count = lv_count + 1.
CLEAR lv_field.
CONCATENATE 'lv_rec-fld' lv_count INTO lv_field.
CONDENSE lv_field NO-GAPS.
ASSIGN (lv_field) TO <fs_fld>.
<fs_fld> = lv_fld3.
ENDDO.
BREAK-POINT.
Succes.

Error while assigning Decimal Attribute to PA

Hi,
I am receiving an error while assigning a decimal attribute to the planning area. I am attaching the screen shot below . Can anybody shade some light on this error, what could be the reason ?
Thanks in advance.
Regards,
Chandan

One cannot have a decimal attribute as the 'attribute' in planning. A decimal attribute can always be marked as a key figure.
For eg: Price. It cant be a attribute of planning area (like Plant, product).

Error: EDI: Error while assigning IDoc number

Hi Everybody,
using XI 3.0 on Linux 64 bit SLES9 with Oracle I got some probleme sending messages from mq series to sap:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>EDI: Error while assigning IDoc number</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: EDI: Error while assigning IDoc number</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What is missing here?
Kind regards,
Michael

Hi Jayakrishnan,
thanks a lot for your answer.
SM59 is working finde. In IDX1 I got the the correct RFC destination entered and a double click works fine also.
The other way around R3 -> XI -> mq series is working fine. Here we are trying mq -> XI -> R3 and it stops sending from XI to R/3.
How to check the IDOC type?
Regards,
Michael

Error while assignment of Paying Co Code in FBZP

HI friends,
I am getting the following error while assigning Paying Co Code in FBZP -
Company code 7144 is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.bold**
The reason for the same isCompany code 7144 is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
The scenario is that one company code is making the payments for the other. However, the 2 companies are based in different countries. Hence, system is not allowing this assignment.
Has anyone come across this scenario? Is there any other wayaround for this which can result in Intercompany postings.
If we assign the Paying Company Code in the Variant screen in F110( instead of FBZP), will that work? I have tried the same but it doesnt work that way.
Any help on this will be highly appreciated.
Thanks in advance,
Hrishi

- i am not sure if its possible; help on FBZP clearly states this
+++++++++++++++++
The paying company code and the company code to which payment is made must be in the same country and have the same local currency and parallel currencies. In addition, both company codes must have the same settings for enhanced withholding tax functions (active or not active).
Only the valid company codes for the paying company code are included in the possible entries.
+++++++++++++++++
Rgds.

JMS sender cc error: Error while calling operation 'setChannel' for object

Hi guys,
I'm getting following error in my sender JMS adapter which tries to connect to Websphere MQ:
Error while calling operation 'setChannel' for object '| com.ibm.mq.jms.MQQueueConnectionFactory
it is then followed by connection and system parameters.
Any idea, what could be wrong?
I also doubt about cc's connection parameters:
- transport network protocol: should I use TCP/IP or WebsphereMQ?
- JMS compliant: non-JMS or JMS compliant?
thanks for your help,
olian

Hi Olian,
the configuration of a JMS adapter requires close working with the MQ team. they are best people to tell you what is the correct parameter value.
depending on the "transport protocol" he will be able to help you complete the configuration.
if you have chosen "websphere MQ (non-jms)", the transport/network protocol and Jms-compliance depends on the configuration made on the network and MQ.
Raghu

ORAMED-01002:[Metadata error in assign operation]

Im using the Oracle Mediator component to assign an expression to a property. The assign expression uses the dvm:lookupValue() function to assign the outcome of the function to the property. When I invoke a message from e.g. SoapUI or the em testfeature it all works perfect. But when I use a testsuite with an initiate message that is similar to the request from SoapUI, the message fails with the following error:
Non Recoverable System Fault:
ORAMED-01002:[Metadata error in assign operation]Metadata Error occurred while assigning to target "$out.property.jca.db.XADataSourceName" using invalid expression "dvm:lookupValue("oramds:/apps/dvm/RegioCode.dvm","RegioCode",$in.request/sadr:GetHoofdaanvragerAdressenRequest/ns6:PersoonKey/ns5:RegioCode,"Datasource","jdbc/DoNotUse")".Possible Fix:Fix the expression. Cause:internal xpath error
Invoke via SoapUI results in the following instance message fragment:
<message>
Assigned "dvm:lookupValue("oramds:/apps/dvm/RegioCode.dvm","RegioCode",$in.request/sadr:GetHoofdaanvragerAdressenRequest/ns6:PersoonKey/ns5:RegioCode,"Datasource","jdbc/DoNotUse")" to "$out.property.jca.db.XADataSourceName"
</message>
Any suggestions.
Regards,
Melvin

Hi Clemens,
We've reported a service request on metalink regarding this issue. See : 3-1154677691
I've summarized the messages for you:
A SoapUI message that works:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:adr="http://www.xyz.nl/Services/AdresService"
xmlns:geb="http://www.xyz.nl/Contracten/Gebruiker"
xmlns:elem="http://www.xyz.nl/Contracten/Common/Elementen" xmlns:obj="http://www.xyz.nl/Contracten/Aanbod/Object">
<soapenv:Header/>
<soapenv:Body>
<adr:GetObjectAdresRequest>
<geb:Autorisatie>
<elem:Gebruikersnaam>xxx</elem:Gebruikersnaam>
<elem:Locale>nl-NL</elem:Locale>
<elem:Kanaal>1</elem:Kanaal>
</geb:Autorisatie>
<obj:ObjectKey>
<geb:Autorisatie>
<elem:Gebruikersnaam>xxx</elem:Gebruikersnaam>
<elem:Locale>xxx</elem:Locale>
<elem:Kanaal>x</elem:Kanaal>
</geb:Autorisatie>
<elem:RegioCode>xxx</elem:RegioCode>
<elem:Type>0</elem:Type>
<elem:Reference>xxx</elem:Reference>
</obj:ObjectKey>
</adr:GetObjectAdresRequest>
</soapenv:Body>
</soapenv:Envelope>
The testsuite initiate message which fails :
<GetObjectAdresRequest xmlns="http://www.xyz.nl/Services/AdresService">
<Autorisatie xmlns="http://www.xyz.nl/Contracten/Gebruiker">
<Gebruikersnaam xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xxx</Gebruikersnaam>
<Locale xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xxx</Locale>
<Kanaal xmlns="http://www.xyz.nl/Contracten/Common/Elementen">x</Kanaal>
</Autorisatie>
<ObjectKey xmlns="http://www.xyz.nl/Contracten/Aanbod/Object">
<RegioCode xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xx</RegioCode>
<Type xmlns="http://www.xyz.nl/Contracten/Common/Elementen">x</Type>
<Reference xmlns="http://www.xyz.nl/Contracten/Common/Elementen">xx</Reference>
</ObjectKey>
</GetObjectAdresRequest>
The composite Test.xml file
<?xml version="1.0" encoding="UTF-8" ?>

<compositeTest compositeDN="Adres" xmlns="http://xmlns.oracle.com/sca/2006/test">
<about/>
<initiate serviceName="AdresService_ep" operation="GetObjectAdres" isAsync="false" delay="PT0S">
<message>
<part partName="request">
<content>
<GetObjectAdresRequest xmlns="http://www.xyz.nl/Services/AdresService" xmlns:ns2="http://www.xyz.nl/Contracten/Gebruiker" xmlns:ns3="http://www.xyz.nl/Contracten/Aanbod/Object">
<ns2:Autorisatie xmlns:ns4="http://www.xyz.nl/Contracten/Common/Elementen">
<ns4:Gebruikersnaam>xxx</ns4:Gebruikersnaam>
<ns4:Locale>xxx</ns4:Locale>
<ns4:Kanaal>x</ns4:Kanaal>
</ns2:Autorisatie>
<ns3:ObjectKey xmlns:ns5="http://www.xyz.nl/Contracten/Common/Elementen">
<ns5:RegioCode>xxx</ns5:RegioCode>
<ns5:Type>x</ns5:Type>
<ns5:Reference>xxx</ns5:Reference>
</ns3:ObjectKey>
</GetObjectAdresRequest>
</content>
</part>
</message>
</initiate>
</compositeTest>
Regards,
Melvin

Error in assigning hierarchy variant to FM area

Dear Sapians
Iam getting the folllowing error while assigning hierarchy variant to an fm area
Hierarchy variant MPL is incomplete with regard to fiscal year 2011
Message no. F6508
Diagnosis
In hierarchy variant MPL
not all funds centers of fiscal year 2011 have been assigned
not just funds centers of fiscal year MPL are assigned
System Response
The entry has not been transferred.
Procedure
Assign all funds centers of fiscal year 2011 in hierarchy variant MPL.
Check whether funds centers have been assigned that are not valid in fiscal year 2011 in hierarchy variant MPL.
As per this i have assigned the variant to all the fund centres available in the PRD but no use.Its still showing error.Please help as my client have bills to do GR/IR for those POs which apparently done before activating Funds Mangement

I have got the solution.
Thank you,
Regards,
Santosh

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number

Hi,
I'm attempting to create a simple interface which converts cutomer data from a flat file and loads it into a SAP enterprise system as an DEBMAS06 IDoc type. I am getting the error message Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number in the XI message monitor.
Has anyone come accross this error before and if so, what is the resolution???
Thanks, in advance,
Pete

Hi Peter,
did you fixed it?
How did you?
got the same problem
Kind regards,
Michael

Error while assigning dates to associative array of date type

Hi All,
I am facing the issue while assigning dates to associative array of date type:
Oracle Version:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Stored procedure i am trying to write is as following
create or replace procedure jp1 (
p_start_date date default trunc(sysdate,'MM')
, p_end_date date default trunc(sysdate)
is
l_no_of_days number;
type t_date_id is table of date
index by pls_integer;
l_date_id_arr t_date_id;
begin
l_no_of_days := p_end_date - p_start_date;
for i in 0
.. l_no_of_days - 1
loop
    l_date_id_arr := p_start_date + i;
    dbms_output.put_line(p_start_date + i);
end loop;
end;
I am getting error at line 14 while compiling this. and the error message is as following:
Errors for PROCEDURE JP1:
LINE/COL ERROR
14/5     PL/SQL: Statement ignored
14/22    PLS-00382: expression is of wrong type
So while investigating this i tried to output the value of (p_start_date + i) using dbms_output.put_line and the output is date itself.
create or replace procedure jp1 (
p_start_date date default trunc(sysdate,'MM')
, p_end_date date default trunc(sysdate)
is
l_no_of_days number;
type t_date_id is table of date
index by pls_integer;
l_date_id_arr t_date_id;
begin
l_no_of_days := p_end_date - p_start_date;
for i in 0 .. l_no_of_days-1
loop
    --l_date_id_arr := p_start_date + i;
    dbms_output.put_line(p_start_date + i);
end loop;
end;
output of the
exec jp1
is as following:
01-DEC-13
02-DEC-13
03-DEC-13
04-DEC-13
05-DEC-13
06-DEC-13
07-DEC-13
08-DEC-13
09-DEC-13
10-DEC-13
11-DEC-13
12-DEC-13
13-DEC-13
14-DEC-13
15-DEC-13
16-DEC-13
17-DEC-13
18-DEC-13
I see the output as date itself. so why it is throwing error while assigning the same to associative array of date type.
I tried to google also for the same but to no avail.
Any help in this regard is appreciated or any pointer some other thread on internet or in this forum.
Thanks in advance
Jagdeep Sangwan

Read about associative arrays :
create or replace procedure jp1 (
p_start_date date default trunc(sysdate,'MM')
, p_end_date date default trunc(sysdate)
) is
l_no_of_days number;
type t_date_id is table of date
index by pls_integer;
l_date_id_arr t_date_id;
begin
l_no_of_days := p_end_date - p_start_date;
for i in 0..l_no_of_days - 1
loop
    l_date_id_arr(i) := p_start_date + i;
    dbms_output.put_line(p_start_date + i);
end loop;
end;
Ramin Hashimzade

Error : profit center is locked for controlling area

Hi Experts
profit center is locked for controlling area. Like this error is comning while doing MIRO, excise invoice. Please let me know the solution. Profit center mentioned in material master is different.

Dear,
This profit center is locked in its master under Indicators tab. Use transaction KE52 to unlock it if you want.
Your concern to Profit Center being picked up is different then Material Master then use transaction OBBH and notice the substitution assigned to your compay code for call up point 2. Then use transaction GGB1 and check any profit center derivation is done.
Regards,
Chintan Joshi

Error While Assigning Ad insert contract from Ad insert orders.

Hi Experts,
While performing the transaction for u2018Assigning Ad inserts Contracts from Ad Insert ordersu2019, Iu2019m getting the following error.
Message no. JVSD056
I did the following steps.
a) Created a geographical unit.
b) Assigned that geographical unit in the BP master of the retailer with a newly created assignment type.
c) Linked the geographical unit in the booking unit for Ad inserts in MAM .
d) Created an Ad insert order in MAM by using the booking unit which has the geographical unit assignment.
Then tried to execute the u2018Assign Ad inserts Contracts from Ad insert orders. The error message is JVSD056.
Appreciate if anyone can help me in this. This is the first time we are doing this.
Regards,
Suresh

Hi Helios,
I hav egone through the document.However i have resolved the error ar: illegal option -- F by following the doc id Doc ID 785828.1
Now i am facing error while relinking
Relinking module 'FNDCORE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this FNDCORE.dll
gnumake -f E:/oracle/apps/apps_st/appl/admin/PROD/out/link_fnd_5136.mk fndcore.LIST
E:/oracle/apps/apps_st/appl/admin/PROD/out/link_fnd_5136.mk:760: *** target pattern contains no `%'. Stop.
Unable to get the objects for module "FNDCORE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
Please advice
Regards,
SRK

Error while assigning external event

Hi Guys!
I'm getting error, while trying to assign an external event on table output.
I've got a button with action POSTPO, that is residing in standalone form. That action should send data form some form and a table to BAPI.
When I try to configure connector line and assign that *event (from event scope 'any element'), I recieve Internet Explorer's script error " 'length' is null or not an object".
Here are two screenshots: [1|http://www.dennisk.org/tmp/SAP/event_err.jpg], [2|http://www.dennisk.org/tmp/SAP/event_err_mod.jpg].
At the same model I can assign that event to different form and table. The only difference is that before that faulty elements there is a chain of two directly connected BAPIs.
Is there a way to fix it?
Thanks in advance!
Regards,
DK

anybody?

Error while assigning Operating concer to Controlling Area

Similar Messages

Maybe you are looking for