Error while assigning Payload to container variable, Activate SXI_Cache

Hi experts,
I have a BPM-Szenario. There is a ContainerOperation where I want to fill a Container Variable with a Payload variable. Unfourtunately I get an error in TA sxi_cache: "The value of expression "&.....&" cannot serve as the source of an Assignment.
My question is, is it really unpossible to do this?
By the way: After them my bpm in sxi_cache is blocked. Also if i delete the container operation it is a lot of luck to activate my bpm.
My actions to activate the BPM are:
IR - F7 = all is ok
ID - Delete IP and Create the IP new
SLD-Cache - Activate in IR and ID
SXI_Cache - Delta and Full Cache Refresh
TA SWWL - There are no error work items
All actions do have no influence to the sxi_cache.
Are there any ideas from the experts?
Best
Mathias

Hello Mathias,
How do you assign the container varaible? Are you sure, that your XPath-expression is correct? Is your target container a simple typed container?
Best regards
Joachim

Similar Messages

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number

Hi,
I'm attempting to create a simple interface which converts cutomer data from a flat file and loads it into a SAP enterprise system as an DEBMAS06 IDoc type. I am getting the error message Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number in the XI message monitor.
Has anyone come accross this error before and if so, what is the resolution???
Thanks, in advance,
Pete

Hi Peter,
did you fixed it?
How did you?
got the same problem
Kind regards,
Michael

Error while assigning Decimal Attribute to PA

Hi,
I am receiving an error while assigning a decimal attribute to the planning area. I am attaching the screen shot below . Can anybody shade some light on this error, what could be the reason ?
Thanks in advance.
Regards,
Chandan

One cannot have a decimal attribute as the 'attribute' in planning. A decimal attribute can always be marked as a key figure.
For eg: Price. It cant be a attribute of planning area (like Plant, product).

Error: EDI: Error while assigning IDoc number

Hi Everybody,
using XI 3.0 on Linux 64 bit SLES9 with Oracle I got some probleme sending messages from mq series to sap:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>EDI: Error while assigning IDoc number</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: EDI: Error while assigning IDoc number</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What is missing here?
Kind regards,
Michael

Hi Jayakrishnan,
thanks a lot for your answer.
SM59 is working finde. In IDX1 I got the the correct RFC destination entered and a double click works fine also.
The other way around R3 -> XI -> mq series is working fine. Here we are trying mq -> XI -> R3 and it stops sending from XI to R/3.
How to check the IDOC type?
Regards,
Michael

Error while assigning dates to associative array of date type

Hi All,
I am facing the issue while assigning dates to associative array of date type:
Oracle Version:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Stored procedure i am trying to write is as following
create or replace procedure jp1 (
p_start_date date default trunc(sysdate,'MM')
, p_end_date date default trunc(sysdate)
is
l_no_of_days number;
type t_date_id is table of date
index by pls_integer;
l_date_id_arr t_date_id;
begin
l_no_of_days := p_end_date - p_start_date;
for i in 0
.. l_no_of_days - 1
loop
    l_date_id_arr := p_start_date + i;
    dbms_output.put_line(p_start_date + i);
end loop;
end;
I am getting error at line 14 while compiling this. and the error message is as following:
Errors for PROCEDURE JP1:
LINE/COL ERROR
14/5     PL/SQL: Statement ignored
14/22    PLS-00382: expression is of wrong type
So while investigating this i tried to output the value of (p_start_date + i) using dbms_output.put_line and the output is date itself.
create or replace procedure jp1 (
p_start_date date default trunc(sysdate,'MM')
, p_end_date date default trunc(sysdate)
is
l_no_of_days number;
type t_date_id is table of date
index by pls_integer;
l_date_id_arr t_date_id;
begin
l_no_of_days := p_end_date - p_start_date;
for i in 0 .. l_no_of_days-1
loop
    --l_date_id_arr := p_start_date + i;
    dbms_output.put_line(p_start_date + i);
end loop;
end;
output of the
exec jp1
is as following:
01-DEC-13
02-DEC-13
03-DEC-13
04-DEC-13
05-DEC-13
06-DEC-13
07-DEC-13
08-DEC-13
09-DEC-13
10-DEC-13
11-DEC-13
12-DEC-13
13-DEC-13
14-DEC-13
15-DEC-13
16-DEC-13
17-DEC-13
18-DEC-13
I see the output as date itself. so why it is throwing error while assigning the same to associative array of date type.
I tried to google also for the same but to no avail.
Any help in this regard is appreciated or any pointer some other thread on internet or in this forum.
Thanks in advance
Jagdeep Sangwan

Read about associative arrays :
create or replace procedure jp1 (
p_start_date date default trunc(sysdate,'MM')
, p_end_date date default trunc(sysdate)
) is
l_no_of_days number;
type t_date_id is table of date
index by pls_integer;
l_date_id_arr t_date_id;
begin
l_no_of_days := p_end_date - p_start_date;
for i in 0..l_no_of_days - 1
loop
    l_date_id_arr(i) := p_start_date + i;
    dbms_output.put_line(p_start_date + i);
end loop;
end;
Ramin Hashimzade

Error while assignment of Paying Co Code in FBZP

HI friends,
I am getting the following error while assigning Paying Co Code in FBZP -
Company code 7144 is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.bold**
The reason for the same isCompany code 7144 is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
The scenario is that one company code is making the payments for the other. However, the 2 companies are based in different countries. Hence, system is not allowing this assignment.
Has anyone come across this scenario? Is there any other wayaround for this which can result in Intercompany postings.
If we assign the Paying Company Code in the Variant screen in F110( instead of FBZP), will that work? I have tried the same but it doesnt work that way.
Any help on this will be highly appreciated.
Thanks in advance,
Hrishi

- i am not sure if its possible; help on FBZP clearly states this
+++++++++++++++++
The paying company code and the company code to which payment is made must be in the same country and have the same local currency and parallel currencies. In addition, both company codes must have the same settings for enhanced withholding tax functions (active or not active).
Only the valid company codes for the paying company code are included in the possible entries.
+++++++++++++++++
Rgds.

Error While Assigning Ad insert contract from Ad insert orders.

Hi Experts,
While performing the transaction for u2018Assigning Ad inserts Contracts from Ad Insert ordersu2019, Iu2019m getting the following error.
Message no. JVSD056
I did the following steps.
a) Created a geographical unit.
b) Assigned that geographical unit in the BP master of the retailer with a newly created assignment type.
c) Linked the geographical unit in the booking unit for Ad inserts in MAM .
d) Created an Ad insert order in MAM by using the booking unit which has the geographical unit assignment.
Then tried to execute the u2018Assign Ad inserts Contracts from Ad insert orders. The error message is JVSD056.
Appreciate if anyone can help me in this. This is the first time we are doing this.
Regards,
Suresh

Hi Helios,
I hav egone through the document.However i have resolved the error ar: illegal option -- F by following the doc id Doc ID 785828.1
Now i am facing error while relinking
Relinking module 'FNDCORE.dll' in product fnd ...
Removing any existing temp directory
rm -rf temp
creating the temp directory
mkdir temp
changing permissions for the temp directory
chmod 777 temp
Getting the object file names for this FNDCORE.dll
gnumake -f E:/oracle/apps/apps_st/appl/admin/PROD/out/link_fnd_5136.mk fndcore.LIST
E:/oracle/apps/apps_st/appl/admin/PROD/out/link_fnd_5136.mk:760: *** target pattern contains no `%'. Stop.
Unable to get the objects for module "FNDCORE.dll".
See error messages above (also recorded in log file)
for possible reasons for the failure.
adrelink is exiting with status 1
Please advice
Regards,
SRK

Error while assigning group

Hi friends,
1. Iam getting the following error when assigning the group to a user.
<b>An error occurred while adding group assignments; to see the correct status, perform a new assigned groups search</b>
2. When uploading the template also its throwing the java.null exception..
template contains , user name, password, roles , mail_id, group..
after uploading the template all the above information is created except group
when i search for the user which is created based on uploading template ,
the group is not assigned.
I need to send users list asap with groups assigned. but its giving problem...
can anyone suggest me on this..
Thanks & regards
Sireesha.

Hello Sireesha,
Have u followed standard format while uploading the text file....
If not use this format while preparing the groups and users etc.....
http://help.sap.com/saphelp_nw04/helpdata/en/ae/7cdf3dffadd95ee10000000a114084/content.htm
Rgds
Pradeep

Error while assigning objects to Transport Request

Hi All,
while assigning a Transfromation to a Treq i am getting an error saying
Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Kindly advice how to rectify this error

Hi,
You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
See OSS Notes:
Note 613581 - Transfer structure does not exist in version 'D'
Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
Thanks
Reddy

Error while assigning Handling Unit to Delivery

Hi Friends,
I am facing the problem while assigning(manually) the HU to Delivey in VL02N.
Plant/St.Loc are not manged by WM.
It gives the following error:
HU XXXXXXX is in the warehouse. Assignment only possible through transf.order
Note:Warehouse Management is not active.
kindly guide me..
With Regards
Azeez.Mohd

Hi,
Activate lean warehouse management,
Logistics execution>>>shipping>>>picking>>>lean warehouse.
kapil
Edited by: Kapildev Farakte on Nov 24, 2009 9:56 AM

ALSB 3.0 error while Assign-copy proxy req 2 business req in transformation

Hi,
I'm getting the following error while i'm mapping proxy service request to business service request in split-join using 'assign,copy'
@compile time it's showing this warning.
Warning: [Assign, Copy] Element {http://www.abcd.com}objGetStateLstTyp not allowed on schema type E=getStateProvinceList|D=getStateProvinceList@http://www.abcd.com/test for From.
Hence causing the following error @runtime.
The invocation resulted in an error: [selectionFailure] Expression 'Variable getStateProvinceListRequest.parameters, nested expression ns1:objGetStateLstTyp/ns1:businessLine' returned 0 items when exactly 1 is required..
Please help.
Edited by ganeshgadi at 05/29/2008 10:20 PM

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Error while assigning external event

Hi Guys!
I'm getting error, while trying to assign an external event on table output.
I've got a button with action POSTPO, that is residing in standalone form. That action should send data form some form and a table to BAPI.
When I try to configure connector line and assign that *event (from event scope 'any element'), I recieve Internet Explorer's script error " 'length' is null or not an object".
Here are two screenshots: [1|http://www.dennisk.org/tmp/SAP/event_err.jpg], [2|http://www.dennisk.org/tmp/SAP/event_err_mod.jpg].
At the same model I can assign that event to different form and table. The only difference is that before that faulty elements there is a chain of two directly connected BAPIs.
Is there a way to fix it?
Thanks in advance!
Regards,
DK

anybody?

Error while assigning constant to infoobject in open hub transformation

While assigning constants(in rule details) to infoobject in a transformation in a open hub I am getting an error "The Object Name is not allowed to be empty"
Can anyone tell my why this is happening? What should I do now?

Hi,
In the transformation, have you connected that rule to any target field of your destination? If not, then do that and then try to create the routine.
Regards,
Vaibhav

Error while assigning an application to a user

Hi All,
I am new to Oracle Database Lite. I have created a new user and i want to assign a Sample application which comes while installing the mobile server. But while assigning the Sample application to a user through the application page, i got "ERROR: VIRTUAL PATH IS NULL" and when i wanted to assign the Sample application to a user through the user page, i got "Error in executing " Save application ":oracle.lite.web.resource.ResourceException: CONS-10050: Rollback failure: java.sql.SQLException: Io exception: Connection reset by peer: socket write error "
So can any one help me how to resolve this error so that i can assign the application to a user?
Any help is welcomed.
Shrikant

Thanks Scott. I've also been looking for a pattern of consistency that would point to the cause of the problem but have been unable to find one. I was hoping that others may have experienced the same error and could help to shed some light here.
I dug around some and found that the wwv_flows_alias_idx constraint is a unique index on the alias and security_group_id columns of wwv_flows. My application has an alias that is the same for all installations so I thought that somehow a previously used value for security_group_id was being generated causing the unique constraint violation. Can you tell me how that value is generated during the install process? Is it some sort of hashing function?
Thanks

Error while assigning Payload to container variable, Activate SXI_Cache

Similar Messages

Maybe you are looking for