Error while assigning source system to SAP Remote cube

I need to do a query using remote cube and the source sys is flat file.
it wont let me assign the source system to the remote cube.
the r/3 system icon is seen next to the remote cube technical name...
I can't see my flatfile source system
can somebody help me.

Hello Kiran,
I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
You can use Virtual Providers in these different scenarios
Virtual Providers based on DTP => used for SAP source systems
Virtual Providers based on BAPI => used for non-SAP or external systems
Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
Use InfoObects as Virtual Providers
Your case is none of these.
More details can be found under this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm

Similar Messages

Error while creating SOURCE SYSTEM

Hi All,
I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
<b>Error in source system RXX_100
Message no. RSAR502
Diagnosis
With Remote Function Call to system RXX_100 error Screen output without connection to user. ccurred.
Procedure
Remove the cause of the error.</b>
Kindly provide me suggestions and DOCS related to the same.
Suitable points will be awarded for replies.
Expecting your kind reply,
Vineeth

Hi ,
In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
973555 - System must be open for creating/connecting source systems
Thanks,
Shanaka

Error while activating source system

Dear friends,
I am getting Error ' Basic type does not exit' while activating source system in RSA1.
please give the solution .
Regards,
D.prabhu

Hello,
this is due to incomplete partner profiles;
When createing your source system you have to ensure that your source system is open for modifications (transaction SCC4) and that you have administrative rights in this system. Indeed the creation of a source system will create all partners profiles in both systems thus the source system needs to be open for modification.
ensure this and "restore" your source system from RSA1
hope this helps...
Olivier.

Error after restoring source system in SAP BI side

Dear all,
i am getting issue while restoring sap source system through sap bI
"Connection LA is used in the 'LD1CLNT010'
source system as a connection 'LB1CLNT400' to BW."
Do you want to delete this connection in the source system?
Connection Is Restored After It Has Been Deleted Successfully
it asked me delete or do not delete
what to do next

hi,
you need to ensure that source system to BW is restored properly .
check in TABLE RSBASIDOC in BW through transaction se11/se16.every source system entry must be here with repect to BW.
If source system entry is missing then there are issues.Normally BASIS Team makes entry.restores system
you cn also check in RSA1-->SOURCE SYSTEM.Here u must find your R3 system name.
hope it helps
thanks,
nilesh

Error while creating source system entry in SAP BW system

Hi,
I am creating source system entry in SAP BW system for ECC system.In T-Code RSA1 i entered all the details of source system and BW system like RFC destination of source system and RFC user passowrd.
After clicking on enter system is promting me to enter into the souce system using administrator user.but i don't have admin user with SAP_ALL and SAP_NEW profiles because in my organisation they don't assign these profiles to any user.
So can you please update me what are the authorization required for dialog user in source system.
Regards,
Gaurav

I would recommend to create a USER ID as COMMUNICATION type and assign SAP_ALL for it... this way, it can never be misused..
This will ensure that the user ID will have correct authorization in the source system and will not face any authorization related errors later on

Error while creating source system in BI: Modification not possible

Hi All,
We are about to move to production, and therefore it's necessary to create in BI the source system related to our ECC (R/3). While trying to perform this action from BI side we received the error message:
SAP system has status 'not modifiable'. Because of this, and following with known consultants practices we've changed the client to customazing but it still not working although the message at this time is: Changes to repository or cross-client Customazing are not permitted. We have also verified transaction SE06 but it's not possible to change the Cross-Application Component to Modifiable.
Did someone face with this same problem before?
Thanks to all in advance,
Regards,
José.-

Hi Rick,
I really appreciate your quick response. We followed your recommendation and could create the source system without problems. Thanks once again!
Best Regards,
José.-

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Error while loading source system data

BW unknown in source system
The BW IDoc type ZSBA003 is not the same as the source system IDoc type
The following errors occurred in the source system:
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found

hi Steve,
check with transaction we20, if your bw myself source system exist under 'partner type ls' (ls = logical system).
it should exist with
outbound parameter
message type-RSRQST
inbound parameter
message type-RSINFO RSSEND
check also for r/3 source system
you may ask basis for help.

Error while assigning Logical System to Client

Hi,
I am trying to perfomr data transfer suing Idoc from SAP R/3 to PI.
For this, I have created a logical system PD1CLNT100.
But when I try to assign the client 100 to this Logical system through SALE, I ge the following error
"An entry already exists with the same key SALE"
but I am unable to see this entry in the client list in SALE.
Please tell me where is it picking the entry from?
regards,
Piyush

Hi Piyush Mathur SAP
Check once again for Client 100 ... there willl be entry (Assign the Logical System to Client)
Check in table V_TBDLS for Logical Systems..
T000 for Clients
Log out from the system and log in once again and check it....
i hope Above info helps you
Thanks
Ramesh

Error in Assigning Source System

Hi All,
I am getting an error saying that
<b>Communication structure 0ACCNT_GRPV does not exist
Message no. RSAR309</b>
This is after I have created an Infosource and trying to assign a datasource .
Pls Suggest ..what can be done..
Thanks in Advance,
Ashish.

Hi Ashish,
Have you successfully installed the infoobject 0ACCNT_GRPV from business content?
The name implies that it was a standard business content object, hence should be installed from the business content. Since this infosource is with direct update, you should also get the underlying communication structure with the Business content activation. I checked in our system, and this infosource is assigned to the datasource 0ven_accnt_grp_text.
Also, you might want to run the program RS_COMSTRU_ACTIVATE_ALL by specifying the name of the infosource i.e. 0ACCNT_GRPV for activating the inactive communication structure, if any.
Hope it helps,
Sree

Assign Source System to Source System ID

Hello Experts,
I am loading master data from flat file (which is an export from another BI system Info Object) in which one of the attribute is SourceSytem ID (0SOURSYSTEM). But in the flat file some of the records for this particular attribute are blank and some are with R3. So the records which are without any sourcesystem ID are not getting loaded.
Error is as follows: No source system ID exists for source system (logical system) FLAT_FILE.
Detail Error: Procdure: Assign source system ID to logical source system FLAT FILE. To do this go to TOOLS--> Assign source system to source system ID from main menu of DWB.
Can anyone tell me what exactly I need to give at this place. Any two digit char or do I need to contact basis to follow any specification?
Thanks for your time.
Experts please let me know how I can proceed loading flatfile data which i got from another BI system.
Edited by: saptrain on Apr 5, 2010 7:52 PM
Edited by: saptrain on Apr 5, 2010 7:53 PM
Edited by: saptrain on Apr 5, 2010 7:53 PM
Edited by: saptrain on Apr 5, 2010 11:07 PM

Hi,
What exactly does this attribute does while reporting?
Usually if you have 2 source system then this attribute is used to differentiate between to source systems. You have to use this is report to restrict to particular source system
I am assuming it will just differentiates the data that we loaded either from R/3 or FF or something else. Is that right?
Yes, You are right
Apart from that is there anything useful in reporting point of view?
Everything is based on reporting. Mostly you will use this when you are having two source systems. Ex: ECC and CRM for 0BPARTNER info object
It doesnt matter if I give any two chars(as u said) right?
No it doenst matter. You have button called something "Suggest ..." you can use that. Other wise you can give your own name
thanks
Srikanth

I have error while testing the system created from a sap business objects template in SAP portal

I have error while testing the system created from a sap business objects template in SAP portal. Error text:
com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
I configure integration SAP portal and SAP BW system. All system requirements are complied.
Environment
SAP Business Objects 4.0
SAP BW 7.31
1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
2.     Next I setting integration SAP PORTAL with SAP BW system
3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
5. Select Export entry button and binary format file certificate for download. Press download.
6.     Save certificate file in local PC folder
In next step need export certificate file to SAP system. Sequence of step:
1.       Run STRUSTSS02 transaction .
2.       Chose certificate ->import.
3.       Select downloaded certificate file
4.       Select Add to certificate list button and Add to ACL button
5.       Inter System ID and Client(000)
6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
7.       Result – downloaded iview.
8.       In next step I create system from template. System administration->system landscape.
9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
10.   When I created the system and test the connection error occurred: See screen_3
This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

Did you find a solution?

Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number

Hi,
I'm attempting to create a simple interface which converts cutomer data from a flat file and loads it into a SAP enterprise system as an DEBMAS06 IDoc type. I am getting the error message Error - ATTRIBUTE_IDOC_METADATA - EDI: Error while assigning IDoc number in the XI message monitor.
Has anyone come accross this error before and if so, what is the resolution???
Thanks, in advance,
Pete

Hi Peter,
did you fixed it?
How did you?
got the same problem
Kind regards,
Michael

How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
Regards

DEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information.

Regarding problem while assigning logical system

Hi Friends,
I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
Regards,
Madhu

Hello Madhusree,
I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
Regards, Anil.

Error while assigning source system to SAP Remote cube

Similar Messages

Maybe you are looking for