Error while assigning the Position through Hiring

Dear all,
I am getting error "Time constraint" while assigning a newly created Position.
it says "Position cannot be assigned to two employees".
However when I checked through PO13 no person is assigned to that position.
so please suggest.
Regards,
Krishna.

Hi Krishna,
Please check first only one org unit is assigned to positon. Check in PP01 if the position has any A008 relationship.
The time constraint set up for relationships between persons and positions (subtype A008) only allows you to assign one position to on person at a time.
Set the time constraint for relationships between person and position (subtype A008) to 3.
Check the time constraints of the object type through table T77ZR.
Regards,
Supriya

Similar Messages

Bank Analyzer - Error while creating the Position Structure

Hi,
We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
We facing an Error while creating the Position Structure,
Error Message: Status of structure S40CURRACC is "New"
Anyone has an idea how to fix this?
Thank you,
John Crawford

Hi,
1.Run Transaction - /BA1/F0_SGS_START
2.Entered the name of the structure and try to "activate".
3.It will get Active without any inconsistency.
Regards
Phani

Error While terminating the employee through API

Hello Group,
I am facing the error while terminating the employee through standard api. The error is "You cannot create an entry past the termination rule date" The element entry I have are type "Recurring" and Termination at "Final Close" I have gone through the thread
" http://forums.oracle.com/forums/thread.jspa?messageID=3794867 " Which is partial complete.
Will be looking forward for the response.
Thanks,
Nitin Singh

This doc directs to apply a patch.
I have gone through. Just want to cross check if this required. I am able to terminate the employee through the application. There it just throws the warning saying " Element Entry has been changed for the Employee as the result of the termination do you wish to go with the termination"
Srini let me know your opinion.
Thanks
Nitin Singh

Error while compiling the composite through custom ant script

Hi,
I am getting the following error while compiling the composite through custom built ant scripts which are intern call the ant-sca-package.xml. And the composite is created by upgrading the 10g bpels. But the same composite is successfully compiling from Jdeveloper (11.1.1.4).
oad of wsdl "oramds:/soa/shared/workflow/NotificationService.wsdl" failed
oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/NotificationService.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:555)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:417)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:241)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:304)
     at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:388)
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
     at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
     at java.net.URL.openStream(URL.java:1010)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
     ... 9 more
Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
And in the following blog, its recommended to check for the adf-config.xml. But when upgrading the bpels from 10g to 11.1.1.4, I don't see any such file created by Jdeveloper.
http://orasoa.blogspot.com/2010/08/ant-and-mds-composite-compile-error.html
Not sure if I am missing some properties to add in by custom script while compiling.
Thanks
Sree
Edited by: Sree on Jul 4, 2011 7:25 AM

Hi Hussain,
Thanks for the reply.
Were you able to compile the form at the client side successfully?
1) Were you able to compile the form at the client side successfully?:
Ans: Yes, I was able to compile the form successfully at client side.
2) Are you logged in as applmgr user? Have you sourced the application env file before compiling the form?
Ans: No, I have not logged by applmgr user, i am using my own login. Yes I have sourced the application env file before compiling the form
3) What does "echo $FORMS_PATH" return?
Ans: echo $FORMS_PATH on server gives this path
/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource:/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource/stub
Can you please advise?
Thanks,

Error while executing the payroll through transaction code PC00_M40_CALC

Dear Sir/ Madam,
While executing the payroll through the transaction code PC00_M40_CALC , i am getting the error as mentioned below :
"Division by zero not performed "
Calculation rule X0133****5 RTE = ISDIVP DIVID ARR ZERO=A ADD
I am not able to resolve this error. So request to guide me on this.
Thanks & regards,
vijaya.s.c.
Moderator message: wrong forum, please have a look in the (I guess) ERP HCM forums.
Edited by: Thomas Zloch on Jan 24, 2012

Hi,
Maintain have you changed any x013 rule?
If not, just maintain attendance/time events then process the payroll.

System error while opening the timesheet through Portal

Hi Experts,
I am getting the below error message while opening the timesheet through Web Portal. But I am not getting any error if I book time through back end i.e. CAT2 Transaction.
System error: No receiver could be determined
This error comes in Portal only (not in backend) once I enable "HR Enables CATS" option in Data entry profile through CAC1 transaction. There is no error if the same option is disabled. But we need this option to be enabled.
Can anybody help me ASAP for the same?
Thanks,
Atin

Hi Atin,
Can you please let me know how was that problem with HR Enabled Cats is Solved as w are facing the exact same issue.
thanks
Gaurav

Error while testing the webservice through SOAMANAGER

Hi All,
I have created a webservice from a Function module ( RFC enabled). I am getting an error while testing the webservice from the SOAMANAGER but the function module is working fine giving proper output.
The error is
REQUEST:
POST /sap/bc/srt/rfc/sap/zws_test_cms_bp_fac/600/zws_test_cms_bp_fac/zws_test_cms_bp_fac HTTP/1.1
Host: ed1app.corp.fcc.ca:49000
Content-Type: text/xml; charset=UTF-8
Connection: close
Authorization: <value is hidden>
Content-Length: 654
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZSRAV_TEST_CMS_BP_FAC xmlns:ns1='urn:sap-com:document:sap:rfc:functions'><IT_BP_LIST><item><BP_NUMBER>9999990013</BP_NUMBER></item></IT_BP_LIST><IV_COMPANY_CODE>FCC</IV_COMPANY_CODE></ns1:ZSRAV_TEST_CMS_BP_FAC></SOAP-ENV:Body></SOAP-ENV:Envelope>
RESPONSE:
HTTP/1.1 500 CX_ST_REF_ACCESS:XSLT exception.An error occurred during serialization in the simple transformation program /1BCDWB/WSSE2B50F3FDFC9C2A94B7.Access to the table ref. node 'ZSCMS_FAC_CAG_DETAILS' outside a loop
Set-Cookie: <value is hidden>
content-type: text/xml; charset=utf-8
content-length: 0
accept: text/xml
sap-srt_id: 20100202/041112/v1.00_final_6.40/4B67E41A4BC41B7CE10000000A013104
server: SAP Web Application Server (1.0;700)
please do the needful.
Thanks in advance

Hi,
Here is a very smart tool for webservice test:
[soapUI|http://www.soapui.org/]
It works fine for me!
bg,
attila

Error while assigning the user to orgunit and position

Hi,
We are having the below issue :
1.       Obtain the HR master record (P Ids) created by interface - ECC
2.       Assign a valid user to this HR master record -ECC
3.       Do the position/Org assignment against this P Id or personnel master record - ECC
4.       Transfer the Org Id, then the position ID and then the personnel master ID (P Id) to SRM u2013 ECC
5.       Check if the user is in SYNC in SRM - Ideally he should inherit the mandatory parameters from the above Orgs in the structure without which he shall not be able to shop in SRM u2013 step executed in SRM
Please let us know if this process is as per the expectation.
If so, we are ending up with error in the third step where the assignment is not allowed since the personnel master record is created with prior date than the position and the Org units.
Actually we are getting the idoc with user alone from other system, org and position ids are blank. So we are assigning the user in the system and we are getting above error.
Is this the correct process to bring the users alone into the system and doing the position/organization assignment in ECC now?
Or the Idoc comes with this data as well?
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Mar 5, 2012 5:33 AM

Thank you vikas for your reply.
So we should bring all the data in the idoc(O,S,P). Even though O, S are present in the receiving sytem?
Regards
Venkatesh P

Error while assigning the fallowing role to the user

Hi,
ERROR 2007-01-18 14:13:25
CJS-30196 Role SAP_BC_JSF_COMMUNICATION_RO is not assigned to user SAPJSF
i am getting the fallowing error while trying to assigning the fallowing role to the user any body through some light in to it.
Thanks
kiran.B

Hi,
Standard roles are not assigned to users directly.Make sure that copy the role from standard roles then change naming convention like your company specification.
Ex: standard role : SAP_BC_JSF_COMMUNICATION_RO
Step:1: go to t-code: PFCG and give the role name in role tab SAP_BC_JSF_COMMUNICATION_RO
Step:2: press copy button and change the naming convention.
Step:3: Assign to the user.
I hope it will help you.
kiran kumar.v

Getting error while reading the positional flat files

Hi,
I have a requirement to read a Positional Flat file and convert into XML through oracle B2B. I have created a positional flat file .ecs, XSD and parser .ecs file using the blog http://anuj-dwivedi.blogspot.in/2011/10/handling-positionaldelimited-flat-files.html and updated the same in the server.
I have created a agreemnt for inbound scenario But while testing the inbound scenario i am getting an error in B2B as :
Error Code     B2B-50083
Error Description     Machine Info: Description: Document protocol identification error.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Document protocol identification error.
I have tried all the possible ways but getting the same error.
Please guide me to overcome this.
Thanks,
Nishanth

Nishanth,
Have you followed the step#2 correctly -
Copying the parser ecs in the installation directory and adding an entry in XERegistry.xml (of all machines if domain is spanned across multiple machines)
Also make sure that you have provided Identification Value, Identification Start Position and Identification End Position correctly in Document Defintion. Please remember that start position starts from 1 (instead of 0)
Regards,
Anuj

Error while assigning the role to the user

Hi,
error : CJS-30196. SAPBC JSF Communication role is not assigned to the user SAPJSF.
i am getting the fallowing error in installation with NW04S. while trying to assign the above role to the user.any body help me with the solution.
Thanks & Regards
kiran.B

Duplicate Post

Error while updating the records through a DB link

Hi ,
I am getting the below error while updating around 15 thousands records, i suspect it to be timeout but not sure.Please can you let me know what solutions needs to be taken.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Not Found
The requested URL /pls/htmldb/wwv_flow.show was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at htmldb.oraclecorp.com Port 80
Object Type TABLE Object GWB_GRN_GRP_COUNTRIES_LU
Table Column Data Type Length Precision Scale Primary Key Nullable Default Comment
GWB_GRN_GRP_COUNTRIES_LU NAME Varchar2 720 - - - - - -
ALIAS Varchar2 720 - - - - - -
ACTIVE Varchar2 3 - - - - - -
REGION Varchar2 300 - - - - -
1 - 4
Thanks & Regards,
Ramu

Hi Sangu,
See if the following notes help you:
Error when calling API from SQL*Developer, eg. ORA-01403 in API OE_ORDER_PUB.PROCESS_ORDER (Doc ID 1054295.1)
Cancellation Of Transfer Orders Is Not Possible - ORA-01403: no data found in Package OE_Order_PVT Procedure Process_Order (Doc ID 391307.1)
Thanks &
Best Regards,

Error while assigning the persons to the Project activities

Dear Experts,
In Workforce planning, I am facing the below error
No requirements were found for the selection criteria
Message no. C#043
I have created a project and assigned the work center to the activities, the work center is having the persons assigned. I have maintained other formula as SAP007 in the work center capacities tab.
In the network activity when I choose the option to calculate work, the work is calculated correctly, and in the network header Capacity requirements tick is enabled. But still I am not able to assign the persons in Trnx CMP2.
Can you please advise on the above to resolve the issue.
Note: The project status is CRTD.
Thanks and Regards,
Praveen

Hi,
This problem mainly arises when scheduling is not done. Schedule the WBS under which these activities fall. The WBS should not have the status as NTUP. Note that these comments are in addition to what Ahmed has mentioned in his post.
Also check you workforce planning profile if need be. Try this and revert.
Regards,
Gokul

RemoteInvokable Error while executing the sqls through weblogic connection object

Hi, We are getting the following error while trying to execute the sps or sql using
the weblogic connection pool.
1. The client is a simple java program (not Bean).
2. It is processing lots of records (more than 6000). When we are having less no.
of records we are not getting this error. i.e. 200/600 records.
java.sql.SQLException: weblogic.rmi.extensions.RemoteRuntimeException - with nested
exception:
[java.rmi.NoSuchObjectException: RemoteInvokable - id: '334'
Start server side stack trace:
java.rmi.NoSuchObjectException: RemoteInvokable - id: '334'
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:627)
I am also attaching here the source file.
Please advise.
Mishra
[UpdateTransWork.java]

Hi Surya,
Which weblogic version/ service pack are you using?
Meanwhile, the source of this error could be places
where you close allocated JDBC objects twice. AFAIR
it was fixed in the latest service packs.
Regards,
Slava Imeshev
"Surya Narayan Mishra" <[email protected]> wrote in message
news:3cce522e$[email protected]..
>
Hi, We are getting the following error while trying to execute the sps orsql using
the weblogic connection pool.
1. The client is a simple java program (not Bean).
2. It is processing lots of records (more than 6000). When we are havingless no.
of records we are not getting this error. i.e. 200/600 records.
java.sql.SQLException: weblogic.rmi.extensions.RemoteRuntimeException -with nested
exception:
[java.rmi.NoSuchObjectException: RemoteInvokable - id: '334'
Start server side stack trace:
java.rmi.NoSuchObjectException: RemoteInvokable - id: '334'
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:627)
I am also attaching here the source file.
Please advise.
Mishra

Error while loading the dimension through ODI

Hi ALl,
Here iam facing the different error,actually , i migrated all the cubes from dev server to integration server,and again i loaded and saved my rulefiles wen i loaded dimension its loading perfetly , so wen we arre loading the dimension through ODI package , but its all are fine for dev server we are getting the problem::::
"Cannot build dimension. Analytic Server Error(1007083): Dimension build failed. There are many possible causes (for example, problem allocating memory). Check the server log file and the dimension build error file to locate the error that caused the failure..""
then i tried in essbase , now its giving error cannot open object in the arbor path .otn file
its not opening the .otn file, can any one help , it would be appriciated..
Thanks

The .otn file is created when essbase is restructuring and once completed renamed to otl, if it does not complete it can leave the .otn file.
You should be able to delete the otn (maybe stop the application first) and open the outline.
I would also check the logs generated from ODI and also the essbase app logs to troubleshoot the issue.
Cheers
John
http://john-goodwin.blogspot.com/

Error while assigning the Position through Hiring

Similar Messages

Maybe you are looking for