Error while attempting to publish in RH7

Hi everyone,
We just recently upgraded from RH6 to RH7 and in attempting
to publish one of my converted projects I have received an error
message during the first few seconds of the publication process
which reads "Publishing has been canceled. Failed to create file:
cshdat_robohelp.htm." I could not locate any other occurences of
this message in the forums nor out on the www, any suggestions? I
am running on my local machine and still have RH6 on my other
system which publishes this same project without error, very
slowly, but without a problem.
Thanks,
Dan

Thanks Peter,
That appears to have been the problem, I was attempting to
publish my projects from RoboHelp 7 as part of a test to a test
intranet environment rather than our companies live intranet to
ensure that our projects which have been extremely problematic over
the past year in RoboHelp 6 would run smoothly in version 7. After
numerous failed attempts of using this testing environment,
changing the output folders in RH, etc, I changed the server
information in RH to the live region and published without a hitch.
I will be so glad when I can finally get rid of RH 6 and move over
to RH 7 permanently
So far I'm very impressed with RH 7's response time
as I did a side by side comparision of the two programs with my
same project file (both backup copies of it) and what took me 6.5
hours in RH6 only took me 40 mins in RH7.
Thanks again,
Dan

Similar Messages

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
ErrorEventID : 4126
In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
is 1 and the SCOM alert is still active.
The version is Exchange 2010 SP3 UR5
Any clues???

Hi,
From your description, this issue only affect one mailbox datatabase.
Please use the Update-MailboxDatabaseCopy command to check result.
If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
Best regards,
Belinda Ma
TechNet Community Support

Getting error while installing BI publisher desktop 64 bit

Hi ,
I'm getting the following error while installing BI publisher desktop 64 bit.
"Please use BI Publisher Desktop installer 32 bit"
My Machine OS is : Windows 7 , 64 bit.
If I go with BI publisher desktop 32 bit, I'm not getting the "BI Publisher" tab in Microsoft Word. (MS word version : 2010) .
Kindly help to solve the installation issue.
Regards,
Vanitha

Hello Vanitha,
After you install BI Publisher Desktop 32bit, you are not seeing the BIP ribbon on MS Word but can you see the BI Publisher Add-In
in Word Options > Add-Ins > Inactive Applications Add-Ins?
Bogdan

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind

What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind and i alreeady cheack my DNS settings and everything

Has this worked before, or is this a new configuration?
On the server, launch Terminal.app from Applications > Utilities and post the output of the following harmless diagnostic command — and you'll need to enter an administrative password when requested:
sudo changeip -checkhostname
On the OS X (presumably) Mavericks client, please post the IP address(es) of the DNS server(s) you're referencing. These are available via the System Preferences > Network > Advanced > DNS settings.
To check the console logs, launch Console.app from Applications > Utilities on both the client and the server, and then attempt the binding, and then post a (short! no more than ~25 to 50 lines!) of any errors related to the binding error.
If you're not in a position to post configuration details here — which is perfectly reasonable, and entirely your prerogative — or if I'm getting too confusing or too technical with some of the questions here, which would be my error of course — then (assuming these systems are under warranty) I'd suggest contacting the folks at the local Apple Store and having a chat with the local Geniuses about this, or checking directly with the Apple Support folks via telephone.

"Unknown Error" when attempting to publish through Muse

I recently updated my log in information to better organize log in credentials that I currently have deployed. I edited just the basic email and password as well as adding another one of my alternate email addresses. When I did that the ability to manage the site I have published through muse disappeared through the website interface. I also am receiving an "Unknown Error" when attempting to publish from the Muse application itself. Log in credentials are definitely updated and correct, just not sure where the others went.
Any help in the right direction is appreciated!

Hello,
I'm having this exact same issue. Same popup. Could I get some help resolving it as well?
I am an admin on the site in question, not the owner. I updated my BC email address to match my adobe CC username/email, but it still doesn't seem to be working.
Chris Mayer
The site I'm trying to upload my muse file to is http://popsleep.businesscatalyst.com/ (it should be the only BC I have access to I believe)

IWocountered an error while attempting to create the attachment data.

Hi I have created an invoice on pages,then saved it.
When i click on share to send document via email as a PDF file this message comes up "IWORK ENCOUNTERED AN ERROR WHILE ATTEMPTING TO CREATE THE ATTACHMENT DATA" can anybody help it very frustrating,i recently wiped my mac book pro and since i put iwork back on it hasnt worked.
Thanks Tasha

Pages 5 has a complex and unique file bundle format. Designed to make it impossible to extract any contents when the inevitable goes wrong.
GMail, Amazon, Dropbox etc (almost any non-Apple Server software) just don't understand them.
Send the files via Apple Mail.
Peter

Error: SharePoint Workspace encountered an unknown error while attempting to create this list

Hi,
I am using Sharepoint workspace to offline synchronize a document library.
In the workspace, I provided the site name. All but one document library was downloaded.
I selected the document library, which did not get downloaded. I am getting the below message:
SharePoint Workspace encountered an unknown error while attempting to create this list. Ask your site administrator to resolve the issue and then click Resolve Error in the Resolve tab.
If I click on Resolve error, the sharepoint workspace crashes and opens again.
How to fix this?
Thanks

Hi,
For troubleshooting your issue, you can take steps as below:
Running groove.exe /clean from command prompt
Running groove.exe /clean /all from the command prompt
Removing the library from sharepoint workspace and re-adding it
Deleting the users folder from c:\users\username\appdata\local\microsoft\office\groove\user
Running a repair on Office 2010
Uninstalling and reinstalling the Sharepoint Workspace tool from the computer
Verifying all updates are installed
Reference:
https://support.office.com/en-in/article/Resolving-conflicts-and-errors-in-SharePoint-Workspace-70928d16-1cff-4931-b693-f5e346a7bf99?ui=en-US&rs=en-IN&ad=IN#bm1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

"Error while attempting to save event log" On VPN3000

My VPN have started to e-mail the following problem.
54438 03/29/2008 14:55:06.660 SEV=2 EVENT/14 RPT=288
Error while attempting to save event log (operation: fopen, code:
Anybody have any idears, I have tried to reboot but need not fix anything.
When I try click on "Save Needed", I get the following errror "Unable to Save
File Write Error".
I can see that my event log is getting updated with other stuff like "IKEDBG/79" - "Phase 1 failure against global IKE proposal".

Try re-naming the existing files, and then do the save. I had a similar problem, and I think it was a corrupt file that the system could not overwrite, but could rename. Then you can delete the old one.

Error When Attempt to Publish Pages

Hello -- I'm re posting this as the problem continues to
exist for this customer of mine, and still have not been able to
determine a solution. Hopefully someone out there will be able to
shed some light this time?
Thank you.
Original Post:
Hello -- I've just built a new site for a customer who wants
to maintain their own content, and we're set up to use Contribute 3
for that.
I've sent the customer their key for editing, and, during
early training, they're able to connect to the site and edit pages.
However, when they attempt to publish an edited page, after
Contribute displays the "Publishing your draft to the server..."
message window, they report a fairly lengthy delay (i.e. at least a
couple of minutes), then Contribute indicates that the "operation
was cancelled" and displays the error message: "Contribute could
not connect because the server is down or not accepting
connections. Please contact your administrator."
I am able to successfully edit and publish pages to the site
while on the phone with the customer at the same time they're
working, using Contribute 3.11 (they're running at least 3
something - waiting to get exact version info. from them), the same
connection key and roughly the same general environment as the
customer (as far as I know). The main difference I know of is that
I'm on a fast cable broadband connection and they're on what I
believe is a slower DSL (exact speeds unknown). They're on Windows
XP (probably the Home version). I don't know yet what their setup
is re. things like firewalls, etc., although its a home office, and
they're not a high tech user. They report no other problems
accessing the Web.
The server is up and as far as I can tell accepting
connections, at least from my vantage point, during this time (as
indicated, I can do a Publish of pages I edit while troubleshooting
on the phone with the customer, and can access the server in other
ways as well during this time).
I've emailed a new key to them (which I tested locally before
sending), to see if perchance something might've been amiss with
their copy of the first key, but without success. I'm fairly sure
it' s not related to permissions on the FreeBSD/Apache server, as
ones I've tested seem to generate different error conditions, and
haven't yet been able to configure any of my firewalls to cause
this error, searched and haven't found anything quite related in
the forums or online support so far.
I've also tried changing various settings in XP related to
internet security and so on but haven't been able to reproduce the
problem here that way either.
Anyone have any ideas what might be causing these symptoms,
and/or what else I should be looking for, how to resolve?
Thanks in advance.
JD_Cat

CS3 has a fix for the timeout problem. You can set the length
before Contribute times out and says it can't connect to the
server. But they didn't fix the underlying problem--that it takes
so long in the first place.

Error while trying to publish 2013 workflow via designer. Probably a workflow manager backend user account issue?

Hello, I am getting error while publishing the 2013 workflow via designer. Also, under sharepoint designer if I try to delete any workflow then the page just refreshes and the workflow does not get deleted.
I checked the services.msc and found that the workflow backend service was stopped. (this happened as the password of the user under which this serivce was running had changed).
So, the network admin changed the service user to LOCAL SYSTEM and started the service.
Now, the workflow backend service is started. We have run the iisreset also.
However, I am still getting the same error:-
System.IO.InvalidDataException: A response was returned that did not come from the Workflow Manager. Status code = 503:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
Client ActivityId : ee94689c-4e08-b055-fe9c-268d7a94
Please find attached snapshot.
Is the error as a result of the change in service user? Can you tell me what priviledges should the account running the workflow backend service must have?
UPDATE 1:-
We have set the workflow service backend account user as farm admin and also tried to set it to site admin. The service is re-started. Now, for a new web application,
I can delete workflows. However, for existing site, I am not able to delete the existing workflows.. Also, I am not able to publish workflows (present under new and previous sites) and the error is same as described earlier.

Hi Nachiket,
According to your description, my understanding is that you got an error while publishing the 2013 workflow via SharePoint 2013 Designer.
As you have changed the password of this service. Please open IIS and make sure identify of the WorkflowMgmtPool is correct, you can re-type the identify. Then make this pool is started.
Open Services, find Service Bus Message Broker service and Windows Fabric Host Service. Make sure they are running. If not, firstly, start Windows Fabric Host Service, then start Service Bus Message Broker service. If Service Bus Message Broker service is
started, stop and re-start it.
Here are some similar posts for you to take a look at:
http://developers.de/blogs/damir_dobric/archive/2012/10/23/deploying-sharepoint-workflows.aspx
http://developers.de/blogs/damir_dobric/archive/2012/09/18/servicebus-message-broker-service-is-starting-and-starting.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error while installing BI Publisher Desktop - Plz Help

Hi all,
Getting following error while trying to install Oracle BI Publisher desktop
Template Builder Installer failed: Unexpected Error
-> I've downloaded "BI Publisher Desktop 10.1.3.4.2 for Windows" software from the following link
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
-> OS: Windows 7 Enterprise (64-bit)
-> Microsoft Office Professional Plus 2010
-> I googled for answers, but none of the suggestions i found were working.
Please help..
Regards,
Srini

>
-> OS: Windows 7 Enterprise (64-bit)
-> Microsoft Office Professional Plus 2010
>
why not BI Publisher Desktop > 11
say BI Publisher Desktop 11.1.1.5.0
for BI Publisher Desktop 10.1.3.4.2 see System Requirements for BI Publisher Desktop Tools http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12690/T434820T487781.htm
>
Client Operating System
Windows 2000
Windows 2003 SP1 (32-bit only)
Windows XP SP2 and later
Windows Vista
>
so win7 may be rise an error because it's "Unexpected Error" :)

Error while previewing BI Publisher Report Output form Desktop

Hi,
i am getting below error while previewing Report Output form Desktop:
javaw -Xmx256M -jar "C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib\RTF2PDFv2.jar" "C:\Users\mahlawat\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tb_param.xml"
File not found.
Please suggest
Regards,
Meetu

Hi ,
are u able to login into the bipublisher...check once..
http://10.81.200.102:7777/xmlpserver
generaly while connection to the desktop we will give the url at the bottom.
the vpn is connected or not..
Thanks,
Ananth

T60 - Error while attempting to read the boot configuration data

Hello,
My wife just got an IBM-certified "pre-owned" T60 (type 2007 66U) running XP a few days ago. I updated all the drivers & patches and handed it over to her in good working order.
This morning when she turned it on, she encountered a message from the Windows Boot Manager:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1) Insert your Windows installation disc
2) Language settings
3) Repair your computer
If you do not have this disc....
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data
It almost goes without saying that we do not having our Windows installation disc as it was pre-installed by Lenovo. I've tried using F11 (after enabling it per other threads on this site) to access the recovery partition but it only takes me directly to the Windows Boot Manager error screen.
How do I go about repairing this BCD/Windows installation so we can continue our life?
Thanks...

You said that the computer is running Windows XP, but unless i'm wrong BCD (Boot Configuration Data) is a new feature starting with Windows Vista and also used by Windows 7. Windows XP use NTLDR (NT Loader) so if BCD is corrupted it sounds to me like someone tried to install Vista og Win7 on the computer or there might have been some leftovers from the previous owner. I don't think you have any other option but to use a Windows CD/DVD to fix this problem since you won't be able to boot from this computer. There might be some 3part utilities available that should be able to fix this, but i wouldn't know what that might be. My recommendation would be to get a Windows CD/DVD.
-gan

Error while attempting to publish in RH7

Similar Messages

Maybe you are looking for