"Error while attempting to save event log" On VPN3000

My VPN have started to e-mail the following problem.
54438 03/29/2008 14:55:06.660 SEV=2 EVENT/14 RPT=288
Error while attempting to save event log (operation: fopen, code:
Anybody have any idears, I have tried to reboot but need not fix anything.
When I try click on "Save Needed", I get the following errror "Unable to Save
File Write Error".
I can see that my event log is getting updated with other stuff like "IKEDBG/79" - "Phase 1 failure against global IKE proposal".

Try re-naming the existing files, and then do the save. I had a similar problem, and I think it was a corrupt file that the system could not overwrite, but could rename. Then you can delete the old one.

Similar Messages

Error while attempting to save new zone entries into DNS

Some configuration data is invalid: The automatic client Bonjour browsing domain must either be a fully qualified domain name (it must end with a dot) or be @ (special symbol for the current domain).
mac mini
2.66
4gb memory
mac ox server 10.6.7 (build 10j869)
any ideas on how to save my entries?

I'm far from proficient in DNS, but I've been able to use the GUI for simple DNS configuration. If you provide info on what exactly you're trying to do, there are folks here who may be able to help you out. Have you successfuy configured DNS via the GUI in the past? If so, what are you trying to change? If not, what are you trying to accomplish?
If you're new at this altogether, you need to configure a zone - you'll want to name it with a domain that you've registered. If not, you can try using a "fake" domain. You're probably best off avoiding .local. .lan or .private would be better, but the cost of registering a domain is pretty cheap, so that would be the best bet. Once you have a domain, you need to name your server - this will give you a FQDN for your server - something like myserver.mydomain.something.
Here's one place to look for tips
http://labs.hoffmanlabs.com/node/1436
If you've set up DNS by hand, using the GUI tools can break stuff.
Jeff

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

An error occurred while attempting to save your User information!

hi, when i try to update my address / tshirt size in my profile, i am getting this error..
An error occurred while attempting to save your User information! Please try again later
i have been trying this for the past 10 days,..
can anyone help??
Regards,
Pradhiba

please contact [email protected]

The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

Last night, some of our systems installed updates released on 11/13/2014.
KB3021674
KB2901983
KB3023266
KB3014029
KB3022777
KB3020388
KB890830
Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
Log Name:      Security
Source:        Microsoft-Windows-Eventlog
Date:          1/15/2015 11:12:39 AM
Event ID:      1108
Task Category: Event processing
Level:         Error
Keywords:      Audit Success
User:          N/A
Description:
The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
Servers running Windows Server 2008 that also installed the updates are not experiencing the problem. It looks like one of the updates may have introduced this problem with Server 2008 R2.

...Did you for sure confirm that:
https://technet.microsoft.com/library/security/MS15-001
is the cause?
I did. I had a VM that was not experiencing the problem. I took a snapshot and tested the patches one by one. Installing only KB3023266 immediately caused the issue to occur (after reboot). A similar process was used to confirm that
installing KB2675611 resolved the problem.
Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems. We had installed this patch a few months ago on a couple of servers and it was always quick to install. But,
it seems like installing it on a symptomatic system can cause it to take a long time.

Internal Error: 8004, 4867936, 4920984, 4921436 while attempting to save as XML

Hi,
I get the following error while trying to save fm files as XML.
=== Header Begin ===
Internal Error: 8004, 4867936, 4920984, 4921436
FrameMaker 8.0.0 for Intel
Build: 8.0p266
Window System: MSWindows
Operating System: Windows NT 6.1 (major.minor.build: 6.1.7600 )
Generated on: Tuesday, November 26, 2013 2:01:40 PM
To file: c:\program files\adobe\framemaker8\FrameLog_13.11.26_14.01.40.txt
=== Header End ===
-ramesh

Yes .. definitely get the latest FM8 patch, that may solve the problem.
http://www.adobe.com/support/downloads/product.jsp?product=22&platform=Windows
However, if this is a structured document, you should also be sure to validate (Element > Validate) the file before saving. Also check for graphics that are referenced from a reference page, and you may want to delete any cross-refs that aren't resolved (or resolve them). FM can crash for a variety of reasons when saving to XML, anything that's slightly amiss is likely to cause a problem.
Cheers,
...scott

Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
ErrorEventID : 4126
In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
is 1 and the SCOM alert is still active.
The version is Exchange 2010 SP3 UR5
Any clues???

Hi,
From your description, this issue only affect one mailbox datatabase.
Please use the Update-MailboxDatabaseCopy command to check result.
If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
Best regards,
Belinda Ma
TechNet Community Support

What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind

What are solutions to the "Unexpected error while attempting to bind. Operation cancelled." message when trying to bind and i alreeady cheack my DNS settings and everything

Has this worked before, or is this a new configuration?
On the server, launch Terminal.app from Applications > Utilities and post the output of the following harmless diagnostic command — and you'll need to enter an administrative password when requested:
sudo changeip -checkhostname
On the OS X (presumably) Mavericks client, please post the IP address(es) of the DNS server(s) you're referencing. These are available via the System Preferences > Network > Advanced > DNS settings.
To check the console logs, launch Console.app from Applications > Utilities on both the client and the server, and then attempt the binding, and then post a (short! no more than ~25 to 50 lines!) of any errors related to the binding error.
If you're not in a position to post configuration details here — which is perfectly reasonable, and entirely your prerogative — or if I'm getting too confusing or too technical with some of the questions here, which would be my error of course — then (assuming these systems are under warranty) I'd suggest contacting the folks at the local Apple Store and having a chat with the local Geniuses about this, or checking directly with the Apple Support folks via telephone.

Error while trying to save layout:Console layout (Access is denied)

Got an error while trying to save changes made in the layout,
The error message is
1) 'Preference.properties' (Access is denied), In the details button 'java.io.FileNotFoundException...'
2) and on continuing futher, another message displayed is - 'Error while trying to save layout:Console layout (Access is denied)
There is no Oracle Error Number associated with this message. It is a Oracle Warehouse Builder Error
I have checked that
1) this file exist in owb home/owb/bin/admin/Preference.properties
2) It is not read only
3) tried to set a parameter REPOS_DB_VERSION_ALLOWED=Oracle 10g
as specified in the Installation and Admin Guide
Please can you help?

Also, not that you shouldn't get to the bottom of this, but you should be aware that any of your development or mapping changes are likely still being saved to the respository.
In other words, you could continue working and just ignore these errors. We ran into this situation (it was indeed simply file permissions on the owb directories), but we noticed right away that at least our actual OWB work was in fact still being committed to the respository every time.

Error while trying to save a crystal report via the Add-ins

Hi All,
I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
When I'm trying to save the report via the Add-ins I'm getting the next error :
Unknown error accured failed to get the internal key of the current user.
Thanks for your help,
Eyal

Hi Eyal,
Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
What is your B1 version and PL?
Thanks,
Gordon

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

IWocountered an error while attempting to create the attachment data.

Hi I have created an invoice on pages,then saved it.
When i click on share to send document via email as a PDF file this message comes up "IWORK ENCOUNTERED AN ERROR WHILE ATTEMPTING TO CREATE THE ATTACHMENT DATA" can anybody help it very frustrating,i recently wiped my mac book pro and since i put iwork back on it hasnt worked.
Thanks Tasha

Pages 5 has a complex and unique file bundle format. Designed to make it impossible to extract any contents when the inevitable goes wrong.
GMail, Amazon, Dropbox etc (almost any non-Apple Server software) just don't understand them.
Send the files via Apple Mail.
Peter

Error: SharePoint Workspace encountered an unknown error while attempting to create this list

Hi,
I am using Sharepoint workspace to offline synchronize a document library.
In the workspace, I provided the site name. All but one document library was downloaded.
I selected the document library, which did not get downloaded. I am getting the below message:
SharePoint Workspace encountered an unknown error while attempting to create this list. Ask your site administrator to resolve the issue and then click Resolve Error in the Resolve tab.
If I click on Resolve error, the sharepoint workspace crashes and opens again.
How to fix this?
Thanks

Hi,
For troubleshooting your issue, you can take steps as below:
Running groove.exe /clean from command prompt
Running groove.exe /clean /all from the command prompt
Removing the library from sharepoint workspace and re-adding it
Deleting the users folder from c:\users\username\appdata\local\microsoft\office\groove\user
Running a repair on Office 2010
Uninstalling and reinstalling the Sharepoint Workspace tool from the computer
Verifying all updates are installed
Reference:
https://support.office.com/en-in/article/Resolving-conflicts-and-errors-in-SharePoint-Workspace-70928d16-1cff-4931-b693-f5e346a7bf99?ui=en-US&rs=en-IN&ad=IN#bm1
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

We got some error while fetching your calendar events.

We got some error while fetching your calendar events. Please try again. Please try again.
Suddenly I receive the above message and cannot access my calendar list of events although the calendar itself is displayed. I have closed down several times but the message persists.I am using MAC OSX Snow Leopard/ Firefox 4.01

I have this same problem. Using XP Home SP3 and Firefox 8.0

Getting Error while deploying the autohosted event receiver in office 365 ( ErrorDetail: There was a problem registering the app principal.):

Hi,
I was successfully able to deploy my auto hosted event receiver in office 365 and it was working. I did some changes on code and try to deploy it again but now it through same error always wheneven i deploy it.
CorrelationId: 2ef8a311-f1cf-4ee7-be1a-1125c5231e1c
2> ErrorDetail: There was a problem registering the app principal.
2> ErrorType: Configuration
2> ErrorTypeName: Configuration
2> ExceptionMessage: An error occurred while attempting to execute a principal management operation. Please contact your administrator.
2> Source: RemoteWebSite
2> SourceName: Remote Web Site Deployment
2>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
Please help me on this. Not sure what this error is indicating.
Regards:
Sanjay Joshi

Hi All,
I have tried same thing in different different environment. Different environment mean different azure account and office 365 account. But still the issue persists.
i feel some issue in my office network or in servers. Because couple of days back same thing was working in my private virtual machine in my private network instead of office.
For me i observe a basic problem in this network.
The pop up to provide trust to the app (that come with title "Grant permission to app") comes while i deploy the solution and gets close automatically without clicking trust.
Might be this could be the reason for me ?. because closing of pop up is not providing authentication to my app.
This happens in every server in my office network.
Any suggestions on that. Thanks in advance.
Regards:
Sanjay Joshi

"Error while attempting to save event log" On VPN3000

Similar Messages

Maybe you are looking for