Error while binding the model with the custom controller
Hi All,
I first started with a dummy project and in that binded the model with the custom controller.
For some reason, I deleted the project and created a new one. I have deleted the whole project from the workspace.
Now, when I am trying to bind the model again , I am getting an error when selecting the response parameters saying that DUPICATE ENTRIES.Ideally it should not happen when I am deleting it completely.
I am using a Webservice Model. Can any one help me out to resolve the same.
Looking forward for your response.
Regards
Dipendra
Hi Raman,
I did that and even I have Installed the IDE again.
Still I have that error.
Regards
Dipendra
Similar Messages
-
Error while creating the custom controller
Hi experts,
I am working on a web dynpro object where i need to create an application configuration.I created a custom controller context.I mapped it to main view.I am using the attribute of custom controller context in main view so that another view view1 is displayed based on this attribute.
custom controller context
node1 --> display_view1
mapped above node to main view.
view1 is triggered in main view onaction method based on display_view1 value.
Presently i am getting the dump " node1.1.main doesnot have elements."
Please help.
Edited by: ch_ravi_sap on Nov 22, 2011 2:11 PMHi I get rid off the error.
Changes i have made are cardinality from 0:n to 1:n. selection 0:n
But presently i am changing the attribute of custom controller in component configuration browser.I am not able to see the changed value in main view ( where i have used this attribute ).
Any help is appreciated
Edited by: ch_ravi_sap on Nov 23, 2011 12:17 PM -
Error while opening the custom forms-''function not available to this respo
Error: Function not available to this responsibility , change responsibility or contact ur system administrator
Hiiiii,
While accessing the custom forms in release 12i we are facing the popup error and the form is not getting opened up: "Function Not available to this responsibility. Change Responsibilities or Contact your System Administrator"...
I check the custom top path in $APPL_TOP/admin/adovars.env... its fine there..
but the $Apache_top is not there...
can u plz tell me the solution....
Thanks
Meenakshi Vermauser609981 ,
If ur referring to forms, u need to search in appropriate forum, as this forum is only for OAF queries, and if its realted to OAF page, check the the function of oa page is attached to the specific responsibilty .
--Mukul -
Application error while testing the custom application
Hello Experts,
I've an Enterprise Apllication project named TEST (which is of standard source code of icss)
The test.EAR file is deployed successfully.
While testing the custom application link I'm getting the below error,
like,
https://host:50001/test/indexStandalone.jsp
Kindly let me know how to resolve this.
Any pointers will be appreciated.
bold
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.
Could not initialize XCM configuration in Database.
Check if you have deployed the Software Component 'SAP JAVA DATA DICTIONARY 5.0'].
Exception id: [001372F65D2500570000008900000F6C000462B4700DAC9F]
bold
Thanks & Regards,
Senthil.Hi senthil,
I think it is application.xml file. for example it should be look like this after modification.
<application>
<display-name>home/(customAppName)</display-name>
<description>EAR description</description>
<module>
<web>
<web-uri>sap.comcrmicsswebicss_b2b.war</web-uri>
<context-root>customAppName</context-root>
</web>
</module>
</application>
check this once.......
Regards,
Anil. -
Error while releasing the custom table
Hi Everyone,
Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
Rgds,Hi Sailatha,
After modifying, you need to re-generate everything so that, the changes come in effect.
Trying to release without re-generating will surely result in error.
Regards,
Raj -
Java Script Error while deploying a Model with Value Help
Hi,
I am using EP 7.0 SP 10.
I am trying to deploy a model which includes the Value Help for an Input field, and i am trying to deploy this model.
The model compiles successfully, but gives a Java Script Error while deploying the model,
! Error on Page
When Click on this java script error, it shows that ,
Line:14985
Char 1: Error
object does n't support this property or method.
code
URL: <serverhost>/VCRes/WebContent/VisualComposer6.0/bin/223334.htm?24102006.1712.
The Same model works in dev server, and it fails in the production server.
Thanks and Regards,
SekarHi jakob,
Thankyou for your quick response.
I did a basic model with the help of a documentation which i got from this forums.I created a iView and from there i used Bapi "BAPI_SALESORDER ".
I created a Input Form and a outpot form (table view).I tested model and am able to get the output.but when i try to deploy it is giving me the error.
And i think am not paring any formulas here.
Please guide me.
thanks and regrads
Pradeep.B -
Direct store Delivery : Error while posting the customer payment in FSR
Dear Experts,
We are in the process of DSD implementation at customer place. We are facing the following isuse , your help will be highly appriciated
This is with respect to an error we are facing when the collection clearing
process iin final settlement Run.
The details of the same are as follows:
Transaction code: /DSD/SL_COCKPIT
Area: Payment Posting
Error: Balancing field "Profit Center" in line item 001 not filled
The customer line item of the invoice being cleared has been assigned
the profit center as part of the document splitting at the stage of
invoicing to the customer.
The bank account/cash account to be posted at the time of clearing in
DSD settlement process is not capable of being provided as input nor
available for configuration in the DSD section in IMG.
regards
NeleeshHi
Did you find the solution to this error. We are also facing the same issue while posting payment against the payment method 'Check'.
Kindly help please.
Regards
Noman Rasheed -
Error while compling the custom agent
I am trying to develop custom agent for ifs using jdeveloper. I have attached following .jar file with project.
repos.jar,vbjorb.jar,release.jar,xmlparser2.jar, util.jar, tools.jar, adk_1081.jar, lclasess1.jar
I am getting following error while compiling.
Error: (50) constructor IfsAgent() not found in class oracle.ifs.agents.common.IfsAgent.
Error: (86) method required, but value found.
Can anybody help me to fix this error?
Thanks
SanjayLooks like the call to your agent is missing some parameters.
Here is the constructor for IfsAgent:
IfsAgent(java.lang.String name, java.lang.String[] args,
java.lang.String parameterTableSection, oracle.ifs.agents.manager.ServerManager manager)
This is the description from the iFS Online Resources whitepaper section on creating a simple agent.
The constructor for an Agent always contains these 4 arguments. The arguments are stored in the ServerManager definition file and are
passed to the Agent class when it is instantiated at runtime.
name is the name of this Agent.
args are any custom arguments you want
to pass to your Agent.
sectionName identifies the section
specfic to this Agent in the common
ParameterTable. In practice, it is
the name of this Agent.
manager is the name of the ServerManager
that hosts this Agent at runtime.
I hope this helps.
-D -
Error while Migrating the custom routines in Transformations
Dear All,
I am in the process of migrating BW 3.5 to BI 7.0.I migrated the Standard cubes and DSO's from BW3.5 to BI 7.0 flow successfully.
But while migrating the transformations which are having the custom routines,I am facing the below errors.
The data object "COMM_STRUCTURE" does not have a component called BIC/ZGROSSPRI".But the routine contains BIC/ZGROSSPRI.
I tried to change the BW 3.5 terminology to BI 7.0 terminology.(Like COMM_STRUCTURE replaced by SOURCE_FIELDS).But unable to solve.There are nearly 20 custome routines written in all transformations.
Can any one guide me who faced the same tyepe of problem?
Thanks & Regards,
DinakarHI,
We need to include Source and Target see the below article.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
How to Correct Routines in Transformations
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20correct%20routines%20in%20transformations.pdf
Thanks
Reddy -
Error While Submitting the Custom Report
Hello,
We have requirement on reports 6i to customise a standard report 'Sales Journal By Customer'. Requirement is we need to add a new fields in the layout.
We have copied the standard program and parameters and defined a new custom program and also added the required additional parameters. But when we are trying to submit the custom program it is giving the following error:
APP-FND-00806: The default value RTT is invalid for the Reporting Context segment. Your default value will be ignored. Please inform your system administrator that:
Add the value RTT to the value set for segment Reporting Context, or choose another default value in the Key Flexfield Segments form or Descriptive Flexfield Segments form. Use the Edit Concurrent Program or Define Report Set form for Standard Report Submission report defaults.
Value RTT for the flexfield segment Reporting Context does not exist in the value set FND_MO_REPORTING_ENTITY.
Standard report call a query inside the rdf.
written in parameter sql stmt.
SELECT ENTITY_NAME, ENTITY_ID
FROM FND_MO_REPORTING_ENTITIES_V
WHERE REPORTING_LEVEL = $FLEX$.FND_MO_REPORTING_LEVEL
AND ROWNUM = 1;
now we are change this to
SELECT ENTITY_NAME, ENTITY_ID FROM FND_MO_REPORTING_ENTITIES_V WHERE ENTITY_NAME = 'RTT';
we are making hard code.
we are making a request and attach that report to that request and run the request.
We have done this customisation at our local instance but we are facing the same issue .We are unable to figure out the issue.
Does any of you have any idea why we are getting this error.
It would be great if you can help us regarding this issue.
Thanks in Advanceas this is an eBuiness-related error, you have more chance to get an answer in an eBusiness-related forum, maybe here OA Framework
-
Error while uploading the custom app 2nd time
Hi All,
when i am uploading the custom application through the program /UI5/UI5_REPOSITORY_LOAD for 1st time it is getting properly uploaded, if we do any changes again uploading then i am not able upload the file of the app.
following error are shown in the output.
Help me out in this issue.
Thanks & Regards
Rakesh RaparthiHi,
It seems that you have solved your issue, thanks for your posting.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
IRQ timeout error while executing the custom personality fpga in veristand
Hi,
I have gone through the below link and created a custom fpga code to write analog output and digital output through NI 9269 and NI 9472 card respectively.
NI Veristand add on - fpga configuration editor.
https://decibel.ni.com/content/docs/DOC-35499
i was able to import the .fpgaconfig file in veristand system definition window.
When i execute the code, i am getting IRQ timeout error.
Could any one help me how do i debug this error?
i am interested to see how the veristand host code is executing it.
Hi,
Have you tried to simplify the FPGA code? If the issue is related to the VCE, you should post there :
- https://decibel.ni.com/content/message/67188#67188
The developers of this tool will answer you.
Posting the error message or the FPGA code will also help us
Regards,
--Eric -
Error while transporting the Custom Selection Screen to Production
Hi All ,
I have created a custom selection screen based on selecting the HR REPORT CATEGORY which gets selected under attributes section of an Executable Program.
Every selection screen got replicated till quality but at Production unable to see the same selection screen
Please provide any suggestion to resolve my probs...
Regards,
DheerajHi,
This happened to me once.
I have checked my transport logs and found that everything was successfully transported in order and without errors. But the selection screen was not coming in Productio system. So i have tried activaing and generating the program once which solved my problem.
Hope it helps you too.
Thanks,
Venkatesh. -
Error while saving the custom list created in visual studio 2010
Dear all,
when I am saving the list; I am getting the following error. I do not know where this could be wrong.
Any inputs will help. Now I am recreating a new list - thinking that the objects used in the earlier projects might conflict. Also few lists in the list tab - were throwing error of the same type - which is not functioning well.
warm regards,
sathyaTo give more information on the code
Registration list
//Reference this Feature's parent object, which is SPWeb in this case
SPWeb currentWeb = properties.Feature.Parent as SPWeb;
//Reference the lists we need to manipulate.
SPList tList = currentWeb.Lists["TrainingTrainers"];
SPList rList = currentWeb.Lists["TrainingRegistration"];
//Reference the fields in the lists
SPFieldCollection rFields = rList.Fields;
SPFieldCollection tFields = tList.Fields;
//changes to the Trainers List
SPField fullNameField = tList.Fields["Full Name"];
SPField emailAddressField = tList.Fields["E-mail Address"];
SPField firstNameField = tList.Fields["First Name"];
SPField lastNameField = tList.Fields["Last Name"];
fullNameField.Required = true;
emailAddressField.Required = true;
firstNameField.Required = true;
lastNameField.Required = true;
fullNameField.Update();
emailAddressField.Update();
firstNameField.Update();
lastNameField.Update();
//Changes to the Registrations List
//Change the Display Name of the Title Field
SPField titleField = rFields["Title"];
titleField.Title = "RegistrationID";
titleField.Update();
//Add additional fields as necessary
rFields.Add("First Name", SPFieldType.Text, true);
rFields.Add("Last Name", SPFieldType.Text, true);
rFields.Add("E-mail Address", SPFieldType.Text, true);
rFields.Add("Phone Number", SPFieldType.Text, false);
rFields.Add("ClassID", SPFieldType.Text, false);
rList.Update();
//Make the ClassID column read-only because i will set this later
SPField classIDField = rList.Fields["ClassID"];
classIDField.ReadOnlyField = true;
classIDField.Update();
//Remove the Attachments column from the default view of the Trainers list
SPView tDefaultView = tList.DefaultView;
tDefaultView.ViewFields.Delete("Attachments");
tDefaultView.Update();
//Add new fields to the default view of the Registrations list
SPView rDefaultView = rList.DefaultView;
rDefaultView.ViewFields.Delete("Attachments");
rDefaultView.ViewFields.Add("First Name");
rDefaultView.ViewFields.Add("Last Name");
rDefaultView.ViewFields.Add("E-mail Address");
rDefaultView.ViewFields.Add("Phone Number");
rDefaultView.Update();
Classes list
//Reference the newly created Classes list and perform the following
//1. Set the display name of the "Title" column to "ClassID" and hide it from the New and Edit Forms
//2. Make the "ClassID" column not required
//3. Set the default value of the Registrations column to 0 and do not display it on the new form
//4. Add the built-in "Start Date" and "End Date" columns
//Reference the newly created classes list
SPWeb currentWeb = properties.Feature.Parent as SPWeb;
SPList classesList = currentWeb.Lists["Classes-List"];
//Title column update
SPField titleField = classesList.Fields["Title"];
titleField.Required = false;
titleField.ShowInNewForm = false;
titleField.ShowInEditForm = false;
titleField.Title = "ClassID";
titleField.Update();
//Registrations column updates
SPField registrationField = classesList.Fields["Registrations"];
registrationField.DefaultValue = "0";
registrationField.ShowInNewForm = false;
registrationField.Update();
//Add the Start Date and End Date columns to the list, ensure they both display Date and Time, and add them to the default view of the list
SPFieldDateTime startDate = currentWeb.Fields["Start Date"] as SPFieldDateTime;
startDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
SPFieldDateTime endDate = currentWeb.Fields["End Date"] as SPFieldDateTime;
endDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
classesList.Fields.Add(startDate);
classesList.Fields.Add(endDate);
SPView defaultView = classesList.DefaultView;
defaultView.ViewFields.Add(startDate);
defaultView.ViewFields.Add(endDate);
defaultView.Update();
classesList.Update();
To my sense - when I add the classes list - the error pops up.
the classid is tied to both these lists. -
Siebel -00284 Error while editing the Custom object Data
I have created one custom object and when i tried to edit the data which i have entered , i am not able to edit the data on Custom object. Could you please suggest me on this. Please find the below error.
You do not have permission to edit the record. Click cancel or Back link to continue.(SBL-DAT-00284)
Edited by: Subbu on Jun 29, 2010 1:57 AMHi Shyam,
Try with this code.
*-----Adding the Condition Types at item level
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KSCHL(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=V69A_KONY'.
PERFORM bdc_dynpro USING 'SAPMSSY0' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR' '05/04'.
PERFORM bdc_field USING 'BDC_OKCODE' '=PICK'.
*----1. Unitprc ( ZPR0 )
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KSCHL(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=V69A_KOAN'.
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_CURSOR' 'KOMV-KBETR(02)'.
WRITE x_item-unitprc TO v_unitprc CURRENCY komv-waers NO-SIGN.
PERFORM bdc_field USING 'KOMV-KSCHL(02)' 'ZPR0'.
PERFORM bdc_field USING 'KOMV-KBETR(02)' v_unitprc.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
*-----End of Addition
PERFORM bdc_dynpro USING 'SAPMV45A' '5003'.
PERFORM bdc_field USING 'BDC_OKCODE' '/EBACK'.
Regards,
Aman
Message was edited by:
Amandeep Kumar
Maybe you are looking for
-
Print Module - Set Explicit Font Sizes
In the Print Module Identity Plate can Lightroom set font size explicitly instead of using only a % scale factor? The scale factor is a great idea but it would be a lot more convenient at times to set the font size explicitly to 10 or 12 or whatever
-
I just updated my 3GS to the 6 and everything has turned out well, but when i started signing up for the imessage i ran into some problems. I went through each step as it asked and then it sent a verification link to my email and thats where im lost
-
i keep getting an error message ''dbghelp.dll is missing. please reinstall itunes'' did that 3 times and same results. i can't sync my iphone and i can't open itunes how do i resolve this issue?
-
In PO script values not flowing in Print out ( print preview is ok)
hi, I am modifying MEDRUCK so that I can place a new Window to display <i><u>PO text</u></i> . I am using FM 'READ_TEXT' to get the <i><u>PO text</u></i> . In <b>print preview</b> I can display the <u><i>PO text</i>,</u
-
Update terminate during return sales order creation (Delivery processing)
Hi, I have having issues with a scenario while creating delivery in a 4.7 system. When creating a return order (using FM SD_SALESDOCUMENT_CREATE) our system is configured to automatically generate deliveries for the return SO. The scenario we are fac