Error while Booking and Prebooking course

Dear Experts,
I have tried to prebook a course from the Portal. Upon clicking the prebook link, the system throws the error,
"Error when creating the prebooking with the data entered. Check and, if necessary, change your entries and try again. "
Also when I try to book the course, the system gives the following error,
"Transport connection is active; no changes possible"
Am I missing any configurations. Please guide me on this issue.
Thanks and regards
Saravanan K

Hi Saravanan,
Regarding the first error on prebooking, there always are the start date and end date for each location displayed on the list of entries found. That's why the administrator can choose from this list the right object, which is valid within the period he has already entered on the 'prebook participation' popup or is going to enter. It also depends which from selection's criteria will be entered as first on the popup: location first and the period might be changed afterwards or the period and then the location.
Anyway the system delivers the above error when the invalid location has been selected and the further processing will be stopped.
Regarding the second error, check the SAP Notes 33582, 819656, 163897 and 746917.
In many cases, the transport connection in the back-end system is active. You can then proceed as follows: In the table T000, change the transport settings for the corresponding client. If this is not possible, you can use the TRSP/CORR switch in the T77S0 table to deactivate the transport connection for HR-PD objects.
I hope the above helps.
Li

Similar Messages

  • Error while copying and pasting group of activities

    Hi,
    I am getting an error while copying and pasting a group of activities. Can anyone let me know why I am getting this message.
    type : EStringListError
    Event Code : SLDNA-0655-B
    Description : String list does not allow duplicates
    thank you.

    I had the same error and reported it to Oracle. They requested an XER copy and I am waiting for thier response. This problem is for that particular project only. To work around it do the following:
    Create a new project, open both projects, go to wbs view, copy all wbs's from the correpted project to the new project. The new project will work fine and get rid of the correpted one.
    Good Luck.

  • HT201210 ITUNE IS SHOWING AN ERROR WHILE RESTORING AND UPDATING MY IPHONE 3G 8GB

    Itune is showing n error while restoring and updating my iphone please tell me now what to do

    usama1133 wrote:
    Itune is showing n error...
    And this ERROR would be...?

  • LMS - Error while booking Attendee for a Course

    Hi All,
    I am getting a strange error while trying to book employees to a Course (E). When I right click on Participation menu>Select Book> Select any Employee and then click on the 'Book' icon I get the following error  -
    "USER CANCELED MAINTENANCE;NO CHANGE EXECUTED'.
    I am getting this error for any course or any employee. What may be the reason ?
    Thanks
    Sanghamitra

    This is due to a missing number range.
    Check your configuration under SPRO :
    Learning Solution --> Training Management --> Basic Settings -->Number Range Maintenance --> Define Number Range for Course Participation Document
    hope it helps and let me know if it works:)

  • LSO Check Booking and Prebooking

    Is there a BApi that is to be modified to validate booking or prebooking personnel when you've created a new prerequisite (object type C) for course type in LSO?  Or, is this a configuration change only?  We've created the relationship and the intotype is correct, however, when you test the action the system is not checking for the prerequisite and issuing an error.

    Hi James,
    You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
    Learning Portal:
    The framework of the existing design of the Learning Portal does not
    allow customer specific error messages to be displayed in the portal.
    Only a generic message will be displayed when prebooking in the learning
    portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
    application does not expect to raise an exception from the BADI. If the
    BADI processing is assumed to be unsuccessful, the messages filled by
    the BADI will be ignored and a general error message will be displayed
    in the portal.
    So this is basically a design limitation.
    Administrator Portal:
    Have you tried e.g. the following notes?
    SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
    SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
    Regards,
    Agnes

  • Error While creating OLM - catalog - course

    Dear All,
    I am facing an error while creating OLM COurse.
    There error i am getting is ' The mandatory column TAV_INFORMATION1 ( also known as ACTUAL TRAINING COST ) has not been assigned a value.
    I checked in the page but there is no field named after actual training cost to enter the information. And also we are not using financial costing.
    Request you to kindly suggest on how to remove this error.
    Regards
    Sowmya.

    Hi,
    What is the application release?
    Please see if these docs help.
    OLM: Copying a Courses Errors out With "The mandatory column TAV_INFORMATIONXX (also known as %) has not been assigned a Value" [ID 403721.1]
    Ota.I Not Able To Create Category & Class in OLM [ID 364237.1]
    Cannot Create Offering & Course From Learning Object If Mandatory Dff On Course [ID 458178.1]
    OLM: How To Manage One Common Catalog In A Global Business Group With Several HR Employees Business Groups ? [ID 423186.1]
    Thanks,
    Hussein

  • Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

    Hi All,
    I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
    lessage. But When I try to install SharePoint 2013. I am getting the following error:
    trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
    I am unable to find solution for this issue. what is the solution for this?
    Thanks in Advance..
    Prem Kumar

    To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Error while creating and opening a ERP sales order in SAP CRM

    Hi,
    I am getting an error while creating or opening a ERP sales order from SAP CRM.
    "Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
    Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
    The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
    please help..
    Thanks
    Krishna

    Hello Krishna,
    Did you get a solution to this? I have the same dump message.
    As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
    Thanks a lot,
    Luis.

  • Error while loading and adding IC Transaction

    I received the following error while loading IC Transaction through Load Tasks utility and adding IC Transaction through Process IC Transaction option
    Transactions Load - log:
    *'Cell does not support inter-company transaction details*
    Rajhi Holding; Falcon; 4110100;[NONE];[NONE];[NONE];[NONE];CF1234; 1; 01/01/2006; SAR; 2000; 2000; 1; FC1234; Grant;OWE
    Kindly tell me what it is and how I can resolve this issue.

    Hello
    The probleme is that you have to include in your rule the transactions rule, to allow the acount where you whant to load icp transaction.
    If you are working with YTD that you should use a diferent acount to load the icp transaction and then make the ajustment.
    Becuse the program would not allow to load data and if you have already data it will give you an error, if you load your rule with the integrity box check
    Sub Transactions()
         Hs.SupportsTran "A#Modulo_ICP_Ventas"
         Hs.SupportsTran "A#Modulo_ICP_Costos"
         Hs.SupportsTran "A#Modulo_ICP_Deudores"
         Hs.SupportsTran "A#Modulo_ICP_Acreedores"
    End Sub
    hope it helps

  • Error while opening and creating HFM application (11.1.2.2)

    Hi All,
    I am getting below error message while opening and creating the HFM application in workspace (11.1.2.2).
    Error while opening Application:
    An error has occurred in the application.
    Details
    The following exception has occurred in ApplicationInternal.OpenApplication(): oracle.epm.fm.common.exception.HFMException with message: {6C2736D0-5AE6-4839-91CB-726E21D5C7F7}admin@Native Directory1-2147214848011/15/2012 7:22:10 AMHYPHFMCHsxServerImpl.cpp216911.1.2.2.000.3609-2147214848011/15/2012 7:22:20 AMHYPHFMCHsxServerImpl.cpp250511.1.2.2.000.3609-2147214848011/15/2012 7:22:21 AMHYPHFMCHsxServerImpl.cpp650211.1.2.2.000.3609-2147214848111/15/2012 7:22:21 AMHYPHFMCHsxServer.cpp163611.1.2.2.000.3609OpenApplication: TEST-2147214848011/15/2012 7:22:21 AMHYPHFMCHsxClient.cpp262911.1.2.2.000.3609
    Error while creating Application:
    An error has occurred in the application.
    Details
    The following exception has occurred in ApplicationInternal.CreateApplication(): oracle.epm.fm.common.exception.HFMException with message: {3EE1C8C2-4C07-416E-B4AC-EE2730E9BDD3}1-2147220955111/15/2012 7:33:32 AMHYPHFMCHsxServerImpl.cpp566711.1.2.2.000.3609-2147220955011/15/2012 7:33:42 AMHYPHFMCHsxServer.cpp128511.1.2.2.000.3609-2147220955011/15/2012 7:33:42 AMHYPHFMCHsxServer.cpp85611.1.2.2.000.3609-2147220955011/15/2012 7:33:42 AMHYPHFMCHsxClient.cpp230211.1.2.2.000.3609
    Could please suggest what needs to be done to over come this issue.
    Thanks in Advance.
    Edited by: 913531 on Nov 20, 2012 5:43 AM
    Edited by: 913531 on Nov 20, 2012 5:44 AM

    Hi,
    Please find below for HSVEvent.log details.
    Error*11*hypadmin*11/26/2012 11:50:39*CHsxServer.cpp*Line 1636*<?xml version="1.0"?>
    <EStr><Ref>{29FE8B3D-2E03-4266-8B7F-B327064C7E9E}</Ref><AppName/><User>admin@Native Directory</User><DBUpdate>1</DBUpdate><ESec><Num>-2147214848</Num><Type>0</Type><DTime>11/26/2012 11:50:29 AM</DTime><Svr>HYPHFM</Svr><File>CHsxServerImpl.cpp</File><Line>2169</Line><Ver>11.1.2.2.000.3609</Ver></ESec><ESec><Num>-2147214848</Num><Type>0</Type><DTime>11/26/2012 11:50:39 AM</DTime><Svr>HYPHFM</Svr><File>CHsxServerImpl.cpp</File><Line>2505</Line><Ver>11.1.2.2.000.3609</Ver></ESec><ESec><Num>-2147214848</Num><Type>0</Type><DTime>11/26/2012 11:50:39 AM</DTime><Svr>HYPHFM</Svr><File>CHsxServerImpl.cpp</File><Line>6502</Line><Ver>11.1.2.2.000.3609</Ver></ESec><ESec><Num>-2147214848</Num><Type>1</Type><DTime>11/26/2012 11:50:39 AM</DTime><Svr>HYPHFM</Svr><File>CHsxServer.cpp</File><Line>1636</Line><Ver>11.1.2.2.000.3609</Ver><DStr>OpenApplication: DEMOAPP</DStr></ESec></EStr>
    Edited by: 913531 on Nov 26, 2012 9:07 AM

  • Timeout error while reading and updating in batches in a single transaction

    Problem:-
    In a transaction I do read and update to the database in batches. First batch it runs fine and for second batch it get hanged at
    sqlCommand.ExecuteReader(). The following is not my complete code but required bits of it which will give more information about the problem. At the end of this post please find the error log. Please help me.
    My guess:-
    The problem i see here is with the locks acquired while reading and update still remain when it comes for the second batch which is blocking the next read. But could not find a way to solve it.
    Get connection and open it.
    Begin Transaction.
    sqlUpdateTransaction = sqlUpdateConnection.BeginTransaction(String.Format("UpdateUsageDetailTransaction{0}", storageClassId))
    Get application lock.
    GetApplock
    const String sqlText = @"DECLARE @result int EXEC @result = sp_getapplock Resource=@resourceName,@LockMode='Exclusive',@LockOwner='Transaction',@LockTimeout=@timeout select @result";
    using (SqlCommand sqlCommand = sqlTransaction.Connection.CreateCommand())
    sqlCommand.CommandText = sqlText;
    sqlCommand.Parameters.AddWithValue("@resourceName", resourceName);
    sqlCommand.Parameters.AddWithValue("@timeout", milliSecondsTimeout);
    sqlCommand.CommandTimeout = secondsTimeout;
    sqlCommand.Transaction = sqlTransaction;
    Int32 lockResult = (Int32) sqlCommand.ExecuteScalar();
    Seek and read the range of records.
    using (var sqlReadConnection = new SqlConnection(_connectionString))
    sqlReadConnection.Open();
    SqlTransaction sqlTransaction = _sqlUpdateTransaction;
    _cdrList = CdrOps.FetchByrecordsIdRange(_yearMonth, firstSkid, firstSkid + count - 1, sqlReadConnection);
    sqlReadConnection.Close();
    return _cdrList.Count > 0;
    static public Dictionary FetchByrecordsIdRange(Int32 yearMonth, Int64 startCdrId, Int64 endCdrId, SqlConnection sqlConnection)
    Dictionary cdrList = new Dictionary();
    using (SqlCommand sqlCommand = sqlConnection.CreateCommand())
    sqlCommand.CommandText = "EXEC P_GetCDRData @yearMonth, @startCdrId, @endCdrID";
    sqlCommand.Parameters.AddWithValue("@yearMonth", yearMonth);
    sqlCommand.Parameters.AddWithValue("@startCdrId", startCdrId);
    sqlCommand.Parameters.AddWithValue("@endCdrID", endCdrId);
    sqlCommand.CommandTimeout = DbOps.TwoHourTimeoutValue;
    using (SqlDataReader sqlDataReader = sqlCommand.ExecuteReader())
    FetchrecordPieces(sqlDataReader, cdrList);
    return cdrList;
    Update the records to the list by using a loop Go and check if the number of records read is equal to the batch size then write and flush.
    update()
    _tollUpdatedList.Add((Toll) record);
    _legacyUpdateCount++;
    Dispose.
    Dipose()
    if (_sqlUpdateTransaction != null && _sqlUpdateTransaction.Connection != null)
    sqlUpdateTransaction.Rollback(String.Format("UpdateUsageDetailTransaction{0}", _storageClassId));
    _sqlUpdateTransaction.Dispose();
    _sqlUpdateTransaction = null;
    Commit.
    commit()
    if(_sqlUpdateTransaction != null)
    _sqlUpdateTransaction.Commit();
    _sqlUpdateTransaction.Dispose();
    _sqlUpdateTransaction = null;
    Error log.
    Error: [0x80004005] MonthlyFileDb::Seek - Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

    Thank you, I used beta_lockinfo and observed the following
    spid=59/0/2
    command = SELECT  
    appl=.Net SqlClient Data Provider
    hostprc= 3640
    dbname = DEV_ECAP_P_CAP_ENT_CMN
    prcstatus= SUSPENDED
    spid_ =
    59/0/2
    blklvl = 1
    blkby = 55
    rsctype = 
    locktype =
    lstatus =
    ownertype =
    rscsubtype =
    waittime = 785.139
    waittype = LCK_M_IS
    spid__ = 59/0/2
    nstlvl = 3
    inputbuffer = (@yearMonth int,@startCdrId bigint,@endCdrID bigint)EXEC P_GetCDRData @yearMonth, @startCdrId, @endCdrID
    current_sp = DEV_ECAP_P_CAP_ENT_CMN.dbo.P_GetCDRData
    spid=55
    command = NULL
    appl=.Net SqlClient Data Provider
    hostprc= 3640
    dbname = DEV_ECAP_P_CAP_ENT_CMN
    prcstatus= sleeping
    spid_ =  55
    blklvl = !!
    blkby = 
    rsctype = APPLICATION
    locktype = X
    lstatus = grant
    ownertype = transaction
    rscsubtype = 
    waittime = 
    waittype = 
    spid__ = 55
    nstlvl = 
    inputbuffer =UPDATE UsgDetailCommon SET RunId = t2.RunId FROM UsgDetailCommon t1 INNER JOIN #UsgDetailCommon_Update t2 ON t1.YearMonth = t2.YearMonth AND t1.CdrId = t2.CdrId ;DROP TABLE #UsgDetailCommon_Update
    current_sp = 
    But what is the solution for this...? I am googling and I found similar post but with no solution, here it is not allowing me to post html link 

  • Getting errors while booking the orders.

    hello all,
    please can any one help on following errors while boking the orders.
    1)invalid header id
    2)orkflow activity Schedule has failed. Please fix the errors and retry the activity from the Order Form or the Workflow Monitor.
    3)ORA-01403: no data found.
    what might be the cause for these errors.
    Please help me
    Thank You.

    Hi
    This error is due to wrong apps initilaization in the code.
    thank you.

  • Lost sync data - said error while syncing, and next time, everything was gone

    Hey,
    I was using sync with my sync account chrisbuchholz (this chrisbookwood is an old support account i had) and it worked fine. Had about 24 bookmarks synced. But then I noticed it said - down in the corner of the statusbar - "error while syncing". I didnt think much of it, but the next time I opened firefox, all my bookmarks was gone, and i was left with the default set of bookmarks. I tried pressing the "sync now" button and whatnot but it didnt help.
    Then I tried reinstalling firefox and setting up sync again, but i still only get the default set up bookmarks.
    Can you please recover my bookmarks and tell me what is wrong?
    By the way, I am using Firefox 4 beta 6 on Fedora 14.
    Sincerely,
    Chris Buchholz

    I had the same problem and I fixed it as following (See if it's the same case for you) :
    1. Goto Tools > Options.
    2. Under Advanced, select the Network Tab.
    3. Click on Settings in the "Connection" box (open connection settings).
    4. Check if "Automatic Proxy Configuration URL" is selected. If it is so, select "No proxy" instead or manually enter your proxy if you are using one.
    The option "Automatic Proxy Configuration URL" was the culprit for me and some others as well and selecting "No proxy" instead cured our problems. It is a bug and has already been reported on Bugzilla as you can see here :
    https://bugzilla.mozilla.org/show_bug.cgi?id=734828

  • Error while booking sales order

    Hi All,
    I am getting below message while booking sales order.
    Please suggest on how to solve this
    Order header level sales credit must be equal to 100%
    Thanks,
    Sam

    Hi Sandeep,
    Thanks or the answer. Actually there are 350 orders. so we can not update them from front end individually..
    Infact i am looking for the API code to update this. it will be very helpful if anyone can provide me the API code to update the sales order header salesrep_id field from backend.
    Thanks,
    Samir
    Edited by: user11998096 on Apr 20, 2011 12:01 PM
    Edited by: user11998096 on Apr 20, 2011 12:02 PM

  • Getting XI error-while booking web course

    Hi,
    I am working on LSO (learning sloution) and while doing a booking via t-code LSO_PSV1 for web based course , I am getting a error "Problems have occured with the external course provider 9000.
    I used a debugger to find out the problem and i have got a  message " system not configured as XI Integeration engine'.
    As booking is indepenedent activity for we don't need XI interface.
    Please provide your reply on this how to book an employee on to a web based course.
    Regards,
    Nilesh.

    For PI and backend system: go to TS SXMB_ADM - Integration Engine Configuration.
    For PI: role of business system MUST be Integration Server
    For backend system: role of business system should be Application System and the corresponding Integration Server should point to you PI system.

Maybe you are looking for