Error while booting: SIOCADDRT: File Exists

I have a Toshiba laptop with two nics built in, one 100mb ethernet plug, one wireless.  I do not use the wireless nic.  When my laptop boots I get the "Starting Network" message then a [FAIL] with a "SIOCADDRT:: File Exists" error, however, the network starts and works fine.  How can I go about clearing this error message?
Thanks.

SIOCADDRT = Socket I/O Control Address Route F<something>. 
Give that it tells you a file exist, I take it 'a file' means that there's some kind of route in place. Check if you have any routes defined in /etc/rc.conf or if any odd routes are defined in /proc/net/routes

Similar Messages

  • Installing Arch Linux on USB key: error while booting

    Hello,
    first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
    So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
    Waiting 10 seconds for device /dev/sdc/
    Root device '/dev/sdc' doesn't exist. Attempting to create it.
    ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
    You are being dropped to a recovery shell
    Type 'exit' to try and continue booting
    /bin/sh: Can't contact tty; job control turned off
    [ramfs /]#
    To summarize I'll show you my conf files that could help you to resolve my problem:
    /etc/fstab.conf
    /dev/sdc1 /boot ext2 defaults 0 1
    /dev/sdc2 / ext3 defaults 0 1
    /dev/sdc3 /home ext3 defaults 0 1
    So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
    I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
    /etc/mkinitcpio.conf
    HOOKS="base udev usb autodetect pata scsi sata filesystems"
    I've added to here, "usb" to the hooks
    installed GRUB on my sdc, here is the menu.ist:
    # (0) Arch Linux
    title Arch Linux (USB)
    root (hd0,0)
    kernel /vmlinuz26 root=/dev/sdc ro vga=773
    initrd /kernel26.img
    So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
    I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
    I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

    1. What I did is re-installing entirely from my installation disk or USB to test out different setting in  my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
    2. Yes, same error.
    3. Tested out by-id/by-path and uuid = no difference
    4. Didn't know about larch, it seems to be a nice tool, I'll check it out

  • Error while booting maverick

    error while booting maverick

    The most likely causes of this error are:
    1) Failing to execute tmloadcf after updating the UBBCONFIG file.
    2) Failing to set TUXDIR correctly in the UBBCONFIG file.
    3) Failing to set TUXCONFIG, PATH, or
    LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
    enviroment.when executing tmboot or tlisten.
    You should verify that your environment is set correctly and you should
    execute tmunloadcf to see the contents of the configuration file that has
    been loaded.
    Ed
    <Kaustubh Deoghare> wrote in message news:[email protected]..
    Hello,
    I am getting following error while booting tuxedo
    exec TMS_ORACLE8I -A :
    TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
    kgsmp789_compat_
    CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
    Though I have installed Oracle9i, in ubbconfig it is still taking
    TMS_ORACLE8I and hence trying to access Oracle8i library files.
    Pl suggest in this regard
    Thanx in advance

  • Error while deleting a file which is in a folder which inturn in workspace

    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    --- Problem summary: ---
    12:20:42.309  DELETE  (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied])  Hello.java   (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
    I am getting above error while deleting a file which is in a folder which inturn in workspace

    Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
    <b>EDIT  (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources])  comp   (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)</b>
    If I try the same from the DTR shell, I get this following error:
    <b>Unexpected problem occurred during executing command.Lockfile "C:\Documents and
    Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.</b>
    I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
    Thx
    Bhaskar

  • Error while writing wsdl file

    Hi,
    i' m working on jdeveloper 10.1.3.1.0 and when i want to add a partner link to my BPEL project i get 'error while writing wsdl file' 'exception null' error then i couldn't create file.
    so how can i solve this problem?
    HELP:)

    Once the wrapper procedure is created by the adapter, the adapter does a second search to obtain the information about the wrapper (i.e. parameters, their data types, etc.). What's likely happening here is that the wrapper is getting created, but the adapter can't find it. The XSD is based on the wrapper, so if it can't be found, then no XSD can be generated. Try removing the existing wrapper package or choose that option in the wizard when it generates a new one.

  • Getting BSOD error while booting

    Hi,
    I am getting BSOD error while booting using bootable pendrive.
    Could you guys please provide the possible solution
    Regards,
    Chandan

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Pcipsy error while booting

    I have installed a PCI audio card and its driver. While booting
    I am getting following error
    pcipsy: WARNING: pcipsy0: ino 23 is invalid
    pcipsy: WARNING: pcipsy0: ino 10 is invalid
    Can any one tell me what is causing this pci error?
    Thanks

    The most likely causes of this error are:
    1) Failing to execute tmloadcf after updating the UBBCONFIG file.
    2) Failing to set TUXDIR correctly in the UBBCONFIG file.
    3) Failing to set TUXCONFIG, PATH, or
    LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
    enviroment.when executing tmboot or tlisten.
    You should verify that your environment is set correctly and you should
    execute tmunloadcf to see the contents of the configuration file that has
    been loaded.
    Ed
    <Kaustubh Deoghare> wrote in message news:[email protected]..
    Hello,
    I am getting following error while booting tuxedo
    exec TMS_ORACLE8I -A :
    TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
    kgsmp789_compat_
    CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
    Though I have installed Oracle9i, in ubbconfig it is still taking
    TMS_ORACLE8I and hence trying to access Oracle8i library files.
    Pl suggest in this regard
    Thanx in advance

  • BSOD Error while booting Thinkpad L440

    Link to image
    Hi All, 
    I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system. 
    Please help.
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    Hello,
    To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
    Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • USB error while booting

    I'm getting this error while booting:
    Waiting for UDev uevents to be processed
    [ 3.631701] usb 1-1.1: unable to read config index 0 descriptor/all
    [ 3.631811] usb 1-1.1: can't read configurations, error -32
    [ 3.643141] hub 1-1:1.0: unable to enumerate USB device on port 1
    I saw other thread in this forum but i can't find any solutions because I have no USB plugged in. Any suggestions?
    Last edited by quiro91 (2012-06-26 09:17:08)

    rc.conf -> http://pastebin.com/eJTXVt1L
    mkinitcpio.conf -> http://pastebin.com/u90UQ8kt
    udev is actually after base. I'm going to try linux-lts now, I'll let you know, and obviously thanks for your help
    EDIT: using lts kernel, I rebooted 5 times and everything works fine, no error message at all
    DSpider wrote:
    Post these files (preferably using pastebin.com):
    /etc/rc.conf
    /etc/mkinitcpio.conf
    "udev" should be after "base". For example:
    HOOKS="base udev autodetect pata scsi sata usbinput filesystems fsck"
    Then regenerate your initramfs:
    # mkinitcpio -p [your linux preset, since you're using linux-ck... I don't know]
    For the kernel from the [core] repo, it's:
    # mkinitcpio -p linux
    Speaking of kernels, does it happen with linux-lts too?
    Last edited by quiro91 (2012-06-26 15:52:15)

  • Error while retreiving xml file from database

    Hi-
    I am trying to configure Planning and getting the following error message at instance configuration step:
    "Error while retreiving xml file from database"
    We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
    Here is the contents of the configtool error file:
    (Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    (Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
    (Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
    (Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
    Thanks for any help.

    After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
    Here is another quote from SharedServices_Security.log
    2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
    2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
    2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
    2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
    2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
    2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
    2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
    2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
    2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
    2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
    2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
    2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
    2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

  • UCCX 8.0 "Error while uploading the file. Please try again."

    I was on UCCX  version 8.0.2.11003-10 and i was able to upload an script with the same name as an old one (overwrite).
    Upgrade to  UCCX 8.0.2.11004-12 and now I am receiving the error: "Error while uploading the file. Please try again."
    There was a bug CSCth09248 that affected version 7 but supposed to be fixed on version 8 and was fixed on an earlier version. But after moving to a minor patch, problem came back...
    Any ideas?

    Hi,
    I belive the bug was initially opened to fix the issue when uploading script fails when using wizard to configure uccx.
    But now they have re-opened the same bug instead of opened a new one for the issue that you have.
    I looked at the case attached to that bug, case # 617145545. Below is the problem description that customer has which is same as yours and this bug has been re-opened to fix this particular problem.
    When I tried to upload a modified script with an existing file name, the message "script file already exists.
    Overwrite existing script file, continue?" comes up and when I select "OK" then,
    it dispaly Status "Error while uploading the file.  Please try again".
    If I remove an existing file first, it will upload fine.  
    Using UCCX Admin 8.0.2.11004-12 and UCCX Editor 8.0(2.0).
    Thanks
    Ankita

  • Error while creating control file

    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sql
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1  CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS  froce logging NOARCHIVELOG
    2      MAXLOGFILES 32
    3      MAXLOGMEMBERS 2
    4      MAXDATAFILES 32
    5      MAXINSTANCES 16
    6      MAXLOGHISTORY 1752
    7  LOGFILE
    8  GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA'  SIZE 50M,
    9    GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA'  SIZE 50M,
    10   GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG'  SIZE 25M,
    11*   GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG'  SIZE 25M
    SQL>

    CHETAN YADAV wrote:
    hi
    i am getting following error while creating controll file
    QL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area  629145600 bytes
    Fixed Size                  1250548 bytes
    Variable Size             171969292 bytes
    Database Buffers          452984832 bytes
    Redo Buffers                2940928 bytes
    SQL> @c:\study\rose\c.sqlWe can't debug what we can't see. And what we can't see is the contents of "c:\study\rose\c.sql".
    SP2-0042: unknown command "DATAFILE" - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "'C:\ORACLE..." - rest of line ignored.
    SP2-0734: unknown command beginning "CHARACTER ..." - rest of line ignored.
    SP2-0044: For a list of known commands enter HELP
    and to leave enter EXIT.
    1 CREATE CONTROLFILE SET DATABASE "ROSE" RESETLOGS froce logging NOARCHIVELOG
    2 MAXLOGFILES 32
    3 MAXLOGMEMBERS 2
    4 MAXDATAFILES 32
    5 MAXINSTANCES 16
    6 MAXLOGHISTORY 1752
    7 LOGFILE
    8 GROUP 1 'C:\oracle\product\10.2.0\oradata\rose\LOG1ROSE.ORA' SIZE 50M,
    9 GROUP 2 'C:\oracle\product\10.2.0\oradata\rose\LOG2ROSE.ORA' SIZE 50M,
    10 GROUP 3 'C:\oracle\product\10.2.0\oradata\rose\LOG06.LOG' SIZE 25M,
    11* GROUP 4 'C:\oracle\product\10.2.0\oradata\rose\LOG07.LOG' SIZE 25M
    SQL>

  • Error while converting class file to exp and jca file

    error while converting *.class file to *.exp and *.jca file
    =====================================================================================================================
    linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
    error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
    error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
    conversion completed with 2 errors and 0 warnings.
    =====================================================================================================================

    i compile a file javacard use this command:
    ===
    javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
    ===
    and try to convert this class use this command
    ===
    /home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    ===
    result convert:
    ===
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
    converting com.sun.javacard.samples.Identity.Identity
    error: export file framework.exp of package javacard.framework not found.
    conversion completed with 1 errors and 0 warnings.
    ===
    why ??
    please your comment for this problem.
    thank 4 all.

  • EXPORT XFA error while writing XFA files

    Hello Experts,
    We are facing an error while exporting to PDF from BEx report.
    We are on EP7 SP14. BI on SP16.
    After the report is displayed and Export to PDF button is clicked, a new window opens which shows following:
    1. Error:
    Message: No message was provided.
    Stack trace: java.lang.NullPointerException
    at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
    at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
    at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
    at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
    :33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Message: EXPORT XFA error while writing XFA files
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA error while writing XFA files
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:311)
    at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
    :33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: java.lang.NullPointerException
    at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
    at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
    at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
    2. Message:
    No metadata is available for "DISABLE_NAVIGATION":
    <parameterList>
      <param name="BI_COMMAND_TYPE" value="OPEN_DIALOG_DISABLE_NAVIGATION"/>
      <param name="TARGET_DIALOG_REF" value="DISABLE_NAVIGATION"/>
    </parameterList>
    In this window, complete screen of report is displayed as an image instead of PDF.
    Please let me know if anybody faced similar issue earlier.
    It was working perfect earlier, but suddenly error started.
    regards
    Kedar Kulkarni

    No proper findings, but issue resolved.
    Problem i found that we got a domain change and service values were not refreshed until we apply new patch.
    So when we applied patch level 6 on BI WEBAPP& BI BASE S URL for ADS got refreshed and we faced the issue.
    After resetting the URL to new domain problem got resolved.
    Regards
    Kedar Kulkarni

  • Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments  Trying to download My Photos and movie 3 items so i can delete them all

    I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them?  Onece they get into my downloads i can do something with them as i understand.    That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac?    How much better is iLife11 then iPhoto08 and iMovie08 .  Thanks Greg

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

Maybe you are looking for

  • Schedule Lines generated for expired Scheduling agreements

    Hi All, We are facing problems in Scheduling agreements. Schedule lines are getting generated for those agreements whose validity has expired(i.e Validity in Past). Is there any check to restrict those Scheduling Agreements?? Please Help. Regards, Ri

  • SQL Injection on CallableStatement

    I will try to post this all in one line, as the tags are not working today. I know that one should use PreparedStatement over Statement to obviate the thread of a SQL injection attack. Is CallableStatement vulnerable as well? For reference, this woul

  • How do I report on which release code released a Requisition?

    I need to create a report that shows all the requisitions created last month and which release code approved them.  I know I can join EBAN and T16FS to see the codes that CAN approve, but I need to know which one DID approve.  We only require one of

  • Deploy Office 365 Pro Plus using MDT 2013

    Hello, I'm currently evaluating O365 E3 and am specifically looking into what my options are for deploying Office 2013 Pro Plus when rolling out a new PC image.  Currently I use MDT 2013 to deploy the image to new PCs and install Office 2010 along wi

  • How to create an index for bi-lingual text column

    I have a column that keeps the full file name of the attachment document file of a record. I need to build an index on the column so that we can search the attachment document file. The content of the file will be in English or French, but we don't k