Error while building application installer and exe

i had tried to build an installer and exe for my appication which application and exe building is successfull. but when we install it over the system it does not read analog input and digital inputs and showing NaN in the indicator,I have treid many a ways and this works after disabling the counter reading section which is used to read the pulses from the quadrature encoder. when i again include that particular section it shows the same error. also this entire code works beautifully without any error from our source code, what might be the possible cause , please help me,

Hi Kodee,
1) Are using error handling in your code? Are you getting any errors?
2) What version of LabVIEW are you using? If you are using 8.0 or newer, then you can build a debuggable executable:
Debugging Applications and Shared Libraries
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/debug_apps_dlls/
Regards,
Elizabeth S.
Applications Engineer
National Instruments

Similar Messages

Error while building the installer

Hello,
I got following Error while building installer. Can anybody please tell me what is going wrong. Thanks
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_BuildDevPart.vi >> NI_MDF.lvlib:MDFBuildDevPart_Open.vi
Loading product deployment information
Loading product deployment information
Adding files to installer
*** Error: Windows SDK function returned an error. (Error code -12)
Error accessing build path "D:\Project\QDAS \Builds\QDAS\".
Error creating directory "D:\Project\QDAS \Builds\QDAS\".
The system cannot find the path specified.
*** End Error Report

Hi labviewer,
This error can be due to many different reasons, can you give more details as to what you are attempting to do in your application, what software, if any, you are using in addition to LabVIEW, any additional installers etc.
Message Edited by TMC-NI on 04-27-2008 09:06 PM

Error while building the DC and deploying it.

Hi,
I have done all the while Post Installation Steps of Usage Type DI.
The SAP Link followed was :
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/68d64260752a78e10000000a155106/frameset.htm
This is first time, I am configuring SAP NEWDI.
The server installed is: sap.com/SAP-JEECOR 7.01 SP4 (1000.7.01.4.0.20090417015900
which looks SAP NetWeaver 7.0 EHP1 SP4.
The DB installed is: DB2/NT64 (SQL09050)
The Java Virtual Machine details in the server is:
VM system properties...
Name: Java HotSpot(TM) 64-Bit Server VM
Vendor: Sun Microsystems Inc.
Version: 1.4.2_21-b03
Now, I also installed SAP NWDS 7.01.04 which is SAP NWDS 7.0 EHP1 SP4, I think.
I did some mistakes while doing Post DI Steps.
The track and sc can be successfully imported to SAP NWDS
and I am able to build dcs on that sc.
Now, while doing the step build from Java WebDynpro perspective,
I am getting the build error.
I am pasting the errors.
Kind     Status     Priority     Description     Resource     In Folder     Location
Warning               [Warning]: Path in Classpath for file webdynproadmin.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproclientserver.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynpromodel_dynamicrfc.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynpromodelimpl.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproprogmodel.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproruntime_designtime_coupling_api.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproruntime_designtime_coupling.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproruntime_repository_pmr.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproruntime_repository.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file webdynproservices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file SapDictionaryTypeServices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file SapDictionaryTypesRuntime.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Path in Classpath for file SapMetamodelWebdynproContent.zip not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproadmin.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproclientserver.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynpromodel_dynamicrfc.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynpromodelimpl.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproprogmodel.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproruntime_designtime_coupling_api.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproruntime_designtime_coupling.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproruntime_repository_pmr.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproruntime_repository.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file webdynproservices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file SapDictionaryTypeServices.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file SapDictionaryTypesRuntime.jar not found.     DJ1_DEV_Dhometestarpita~sap.com
Warning               [Warning]: Version for file SapMetamodelWebdynproContent.zip not found.     DJ1_DEV_Dhometestarpita~sap.com
Error               com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.logger     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 29
Error               com.sap cannot be resolved     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 30
Error               com.sap cannot be resolved     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 37
Error               com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.wdControllerAPI     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 72
Error               com.sap cannot be resolved (or is not a valid type) for the field TestApplArpita.wdComponentAPI     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 81
Error               wdControllerAPI cannot be resolved or is not a field     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 87
Error               The method wdGetAPI() is undefined for the type IPrivateTestApplArpita     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 87
Error               wdComponentAPI cannot be resolved or is not a field     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 88
Error               The method wdGetAPI() is undefined for the type IPrivateTestApplArpita     TestApplArpita.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp     line 88
Error               Location cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 25
Error               com.sap cannot be resolved (or is not a valid type) for the field InternalTestApplArpitaInterfaceView.wdAlterEgo     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 30
Error               IWDNode cannot be resolved (or is not a valid return type) for the method wdGetRootNode     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 41
Error               IWDAction cannot be resolved (or is not a valid return type) for the method wdCreateAction     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 51
Error               wdAlterEgo cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 52
Error               IWDAction cannot be resolved (or is not a valid return type) for the method wdCreateNamedAction     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 61
Error               wdAlterEgo cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 62
Error               com.sap cannot be resolved (or is not a valid type) for the argument alterEgo of the method InternalTestApplArpitaInterfaceView     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 70
Error               com.sap cannot be resolved (or is not a valid return type) for the method wdGetAPI     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 78
Error               com.sap cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 79
Error               wdAlterEgo cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 79
Error               logger cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 86
Error               logger cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 87
Error               logger cannot be resolved     InternalTestApplArpitaInterfaceView.java     DJ1_DEV_Dhometestarpita~sap.com/gen_wdp/packages/com/vmp/wdp/wdp     line 94
Info               TextView DefaultTextView: UIElement does not have a label     TestApplArpitaView.wdview     DJ1_DEV_Dhometestarpita~sap.com/src/packages/com/vmp/wdp
After that it is possible to successfully deploy the application after that,
but while running the application, I am getting runtime error.
500   Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for com.vmp.appl.Test_dev_comp: no suitable constructor. (Hint: Does the generation version match the runtime version?)
    at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:103)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
    ... 23 more
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create delegate for com.vmp.appl.Test_dev_comp: no suitable constructor. (Hint: Does the generation version match the runtime version?)
     at com.sap.tc.webdynpro.progmodel.generation.ControllerHelper.createDelegate(ControllerHelper.java:103)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:51)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:382)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Now some points I need to tell about the NWDI:
In the , Post Installation Steps of Usage Type DI:
I need some points to be clarified in:
Preparing the System Landscape Directory.
1. Activate the SLD Server
While doing this step,
      1.      Open the SLD Web UI under the URL http://<server>:<port>/sld.
       2.      Open the initial page of the SLD Web UI and log on as an administrator.
       3.      On the initial page, choose Administration and in the section Server u00AE Profile.
The system displays the Parameters screen.
       4.      ChooseSection u00AEServer Settings.
       5.      Enter a reserved SAP NetWeaver namespace in the input field Object Server. Keep the preset working directory in the input field Working Directory. Select the values for persistency and write protection. Save your entries.
The object server name was localhost. I think this needed to be changed to the FQDN
of the server were the J2EE Engine is running say hclprd09.hcltech.com (or it would be the SID of the J2EE Server, that is DJ1).
The other values are now set to:
Persistence Type: Database
Working Directory: E:\usr\sap\DJ1\SYS\global\sld
Write Protection: None
Then the next step is:
Import the SAP Master Component Information.
1.      On the SLD initial page, choose Administration and in the section Content u00AE Import.
       2.      Choose Import CR Content (this switch appears only before the content import has been executed once. By default, this is a step during installation).
The SLD server starts the import of the SAP Master Component Information. This process can take some time.
For this we have to use the file:
F:\usr\sap\DJ1\SYS\global\sld\model\CR_Content.zip
Is this step mandatory?
If I do the step will I have to recreate the users, roles, worksets and iviews again.
As some developments are already there.
So, importing the CR_Content.zip will overwrite or destroy all those roles, iviews etc.
Now, also in giving the name prefix for the development component for user kaba
has been given by me as sap.com.*
I think this is wrong as the DC is produced by my company and not by SAP.
Then I followed all other steps as written.
Give me your suggestions where I might be wrong.
Regards
Kaushik

Hi Neha,
Yes, till now; you are right.
The Product and sc has been created in
http://<host name>:<port>/devinf
The steps followed are written below:
1> Now Click on System Landscape Directory and create Product.
2> After entering Name, Vendor and Version for Product. Click on Create..
3> Product is created now it will ask for name of Software Unit.
4> Specify name and click on Create.
S/w Unit is created now it will ask inputs for S/w Components.
Provide all the necessary inputs for S/w Components and keep Production State as released.
Click on create.
Now select your Software Component and click on the Dependencies tab in the lower half of screen.
Select Build Time as Context and click on Define Prerequisite Software Components Versions
Now on next page search for three basic dependencies those are.
SAP J2EE ENGINE 7.00
DI BUILD TOOL 7.00
SAP JAVA TECH SERVICES 7.00
This is screen shot for SAP JAVA TECH SERVICES 7.00
Repeat the same process for the other two steps also search word will be *DI* for DI BUILD TOOL 7.0
*SAP J2e* for SAP JAVA TECH SERVICES 7.00
Domain Configuration and Track Creation
Now navigate to Landscape Configurator and click on Domain Data.
Enter all the required inputs in the screen below Click on Save and Update CMS.
Update CMS is very important step do not forget it.
Now click on Track Data and click on New.
Enter all the required inputs in the screen below
On the next page, search for your Software Component and click on ADD.
Click on Runtime Tab on the Top and Select System as per your requirement.
Enter the required Inputs and click on Save.
Now click on Transport Studio on top and select Check In now select all three Dependencies and click on Check In Button.
Now Click on Development Tab on top and Select All 3 Dependencies and Click on Import
Look at the status now it should say Import finished.
Your track is now created, configured & ready to use for development component in NWDS.
But mistake,
I should have added
SAP J2EE ENGINE 7.00
DI BUILD TOOL 7.00
SAP JAVA TECH SERVICES 7.00
Also, I removed prequisite software dependicies from SAP J2EE ENGINE.
Now what to do?
Do I need to import CIM Model Data?
Would it help?
Regards
Kaushik

Error while building application

Hi all,
I'm getting the following errors when I'm trying to build my application. Interestingly, it builds now and then but the application doesn't run.
Any suggestions.
Thanks in advance.
Attachments:
Build error.png ‏517 KB
Blue arrow.png ‏135 KB

Hi Ramrammy,
we have a good KB for that which might fix your problem. Please have a look.
http://digital.ni.com/public.nsf/allkb/705C2ECA081F3C7986256C0F00559B02?OpenDocument
Best regards
Anoj Mubarak
National Instruments

Migration issue--Error while building application in Weblogic Server10.3

We are doing migration in from Weblogic 8.1 SP6 to Weblogic 10.3.
When we are trying to build the applicaiton in Weblogic 10.3 environment it is giving following error.
[java] Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
[java] at
weblogic.application.compiler.Appc.prepare(Appc.java:54)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:192)
[java] at weblogic.appc.main(appc.java:14)
[java] Caused by: java.lang.ClassNotFoundException:
weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
[java] at java.net.URLClassLoader$1.run(Unknown Source)
[java] at java.security.AccessController.doPrivileged(Native
Method)
[java] at java.net.URLClassLoader.findClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
[java] ... 5 more
[java] Java Result: 1[java] Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
[java] at
weblogic.application.compiler.Appc.prepare(Appc.java:54)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:192)
[java] at weblogic.appc.main(appc.java:14)
[java] Caused by: java.lang.ClassNotFoundException:
weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
[java] at java.net.URLClassLoader$1.run(Unknown Source)
[java] at java.security.AccessController.doPrivileged(Native
Method)
[java] at java.net.URLClassLoader.findClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
[java] ... 5 more
[java] Java Result: 1
[java] Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
[java] at
weblogic.application.compiler.Appc.prepare(Appc.java:54)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:192)
[java] at weblogic.appc.main(appc.java:14)
[java] Caused by: java.lang.ClassNotFoundException:
weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
[java] at java.net.URLClassLoader$1.run(Unknown Source)
[java] at java.security.AccessController.doPrivileged(Native
Method)
[java] at java.net.URLClassLoader.findClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
[java] ... 5 more
[java] Java Result: 1
[java] Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/j2ee/descriptor/wl/WeblogicApplicationBean
[java] at
weblogic.application.compiler.Appc.prepare(Appc.java:54)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:192)
[java] at weblogic.appc.main(appc.java:14)
[java] Caused by: java.lang.ClassNotFoundException:
weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
[java] at java.net.URLClassLoader$1.run(Unknown Source)
[java] at java.security.AccessController.doPrivileged(Native
Method)
[java] at java.net.URLClassLoader.findClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
[java] ... 5 more
[java] Java Result: 1
[java] Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/j2ee/descriptor/wl/WeblogicApplicationBean[java] at
weblogic.application.compiler.Appc.prepare(Appc.java:54)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:122)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:115)
[java] at weblogic.application.compiler.Appc.main(Appc.java:192)
[java] at weblogic.appc.main(appc.java:14)
[java] Caused by: java.lang.ClassNotFoundException:
weblogic.j2ee.descriptor.wl.WeblogicApplicationBean
[java] at java.net.URLClassLoader$1.run(Unknown Source)
[java] at java.security.AccessController.doPrivileged(Native
Method)
[java] at java.net.URLClassLoader.findClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at sun.misc.Launcher$AppClassLoader.loadClass(Unknown
Source)
[java] at java.lang.ClassLoader.loadClass(Unknown Source)
[java] at java.lang.ClassLoader.loadClassInternal(Unknown Source)
[java] ... 5 more
[java] Java Result: 1
[java] Exception in thread "main" java.lang.NoClassDefFoundError:
weblogic/j2ee/descriptor/wl/WeblogicApplicationBeanWe have all the required jar's in classpath.
it would be very helpful if anyone gives any suggestion...
Thanks in advance
Edited by: user2928342 on Nov 23, 2009 10:02 PM

Hi Pratik,
Would suggest you to create a "*wlfullclient.jar*" by going through the below link and add it in your weblogic workshop and then try to deploy your application. Also it is always recommended that you should compile the old application again with the new JDK version your new weblogic sever is using.
Tpoic:*Creating a wlfullclient.jar for JDK 1.6 client applications*
http://download.oracle.com/docs/cd/E15051_01/wls/docs103/client/jarbuilder.html#wp1078098
Hope this would help you.
Regards,
Ravish Mody

Error "Please wait while the application opens: BlackBerryLink.exe - Application Error"

After several installations, disinstalls and reinstallations I am completely unable to use BlackBerryLink on my Windows7 PC: The error message provided immediately after launch of BlackBerryLink is with the title
   "Please wait while the application opens: BlackBerryLink.exe - Application Error"
with detailed message:
   "The exception unknown software exception (0xe0434352) occurred in the application at location 0x75cf812f."
Please provide any advice! My brand new Blackberry Z10 like this is only useful at 50% (since the encrypted SD card is not recognizeable as a normal SD card by my PC), and I would prefer not being forced to byuy other smartphones...
thanks for any advice
Knut

Hi Kodee,
1)     Are using error handling in your code? Are you getting any errors?
2)     What version of LabVIEW are you using? If you are using 8.0 or newer, then you can build a debuggable executable:
Debugging Applications and Shared Libraries
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/debug_apps_dlls/
Regards,
Elizabeth S.
Applications Engineer
National Instruments

Error while building sample application "Developing an Order Application"

hi ,
I tried to create a simple Mobile application using the instructions for "Tutorial: Developing an Order Application for Handhelds" given at :-
http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/7294498d870ad3e10000000a11466f/frameset.htm
For the same , by using TCdoe SDOE_WB i created a new SWCV named ORDER_TAKER,
with a Data Object - > ORDER
added Data Object header node -> ORDERHEADER
The ORDERHEADER contains the following fields:
ORDERID          CHAR8
CUSTID             CHAR4
LONGTEXT       CHAR32
SERVICEUNIT   CHAR32
CREATED_ON DATS
CREATED_AT TIMS
As per the tutorial I created Mobile Service Component as "order_sv". under which created Data Objects , and a service name orderService . Now when I copied the code of Defining the Custom Methods , I am getting following error while building the MSC........
Line: -----
* [javac] Compiling 8 source files to C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\classes
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
     [javac] ERROR: symbol : class Order_svModel
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:           if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
     [javac] ERROR:                   ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
     [javac] ERROR: symbol : class Order_svModel
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:           if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
     [javac] ERROR:                                                                ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
     [javac] ERROR: symbol : variable OcaRoot
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:           if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
     [javac] ERROR:                                 ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
     [javac] ERROR: symbol : class OrderOrderheader
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:               ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
     [javac] ERROR: symbol : class Order_svModel
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
     [javac] ERROR: symbol : class Order_svModel
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
     [javac] ERROR: symbol : variable OcaRoot
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:                                                        ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:49: cannot find symbol
     [javac] ERROR: symbol : method valueOf(java.lang.String)
     [javac] ERROR: location: class java.util.Date
     [javac] ERROR:               order.setCreatedOn(Date.valueOf("2007-06-30"));
     [javac] ERROR:                                      ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:50: cannot find symbol
     [javac] ERROR: symbol : variable Time
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               order.setCreatedAt(Time.valueOf("08:45:00"));
     [javac] ERROR:                                  ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
     [javac] ERROR: symbol : class Order_svModel
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:                         ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
     [javac] ERROR: symbol : class Order_svModel
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:                                                                      ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
     [javac] ERROR: symbol : variable OcaRoot
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
     [javac] ERROR:                                       ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:77: cannot find symbol
     [javac] ERROR: symbol : method valueOf(java.lang.String)
     [javac] ERROR: location: class java.util.Date
     [javac] ERROR:               order.setCreatedOn(Date.valueOf("2007-07-05"));
     [javac] ERROR:                                      ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:78: cannot find symbol
     [javac] ERROR: symbol : variable Time
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               order.setCreatedAt(Time.valueOf("10:00:00"));
     [javac] ERROR:                                  ^
     [javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:80: cannot find symbol
     [javac] ERROR: symbol : variable OcaRoot
     [javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
     [javac] ERROR:               OcaRoot.getInstance().commit();
     [javac] ERROR:               ^
     [javac] 30 errors *
Line: -----
Please help...........
Ekam
Edited by: Ekam Preet Singh on Sep 29, 2011 10:32 AM

Hi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K

Error while building SUP based iphone client application

Hi,
I am getting the following error while building the application for iphone simulator. I tried by changing search path settings and added libraries to Link binary search path.I really stuck here. Any body please help me how to solve it.
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_SUPMessageClient", referenced from:
objc-class-ref in SUP101AppDelegate.o
"_OBJC_CLASS_$_MBOLogger", referenced from:
objc-class-ref in SUP101AppDelegate.o
objc-class-ref in SUP101CallbackHandler.o
Thanks in advance
Bala

Hi Rockky/Wang
                I have added the following libraries to "Link Binary with Libraries" . I am using xcode 4.0.2 , SDK 4.3 and MAC-OS 10.6 . Libraries are belongs to SUP 1.5.5. simulator-- iphonesimulator 4.3
AddressBook.framework
CoreFoundation.framework
QuartzCore.framework
Security.framework
libicucore.A.dylib
libstdc++6.dylib
libz.1.2.3.dylib
libclientrt.a
libMO.a
libSUPObj.a
After adding all these libraries automatically added path to "Link search path" as follows
$(inherited)
"$(DEVELOPER_DIR)/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.3.sdk/usr/lib"
"$(SRCROOT)/../../../libs/Debug-iphonesimulator"
Header search path i have given as following
"/Users/RavuriB/includes/**"
"/Users/RavuriB/TravelRequestMAP/Generated Code/**"
Still i am getting the same error
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_MBOLogger", referenced from:
      objc-class-ref in SUP101CallbackHandler.o
"_OBJC_METACLASS_$_SUPDefaultCallbackHandler", referenced from:
      OBJCMETACLASS_$_SUP101CallbackHandler in SUP101CallbackHandler.o
"_OBJC_CLASS_$_SUPDefaultCallbackHandler", referenced from:
      OBJCCLASS_$_SUP101CallbackHandler in SUP101CallbackHandler.o
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
i tried by changing paths differently but no luck.
is that SUP 1.5.5 version is suitable for the xcode version and SDK?. Am I forgot to add any frameworks ? or any thing i need to change. I am really stuck at this problem . Can you Please help me to come out of this problem.
Thanks & Regards
Bala

Error while building Webdynpro application

Hi all,
I am getting error while building web dynpro application.
Error is as :
Error Web Dynpro Generation: Metadata constraint of Component ExtraShifts is violated: ViewElementAggregation "//WebDynpro/View:dk.cph.sec.wd.extrashifts.application.ExtraShiftsView/RootUIElementContainer/Child:OuterGroup/Child:TuesdayGroup/Child:TuesdayTable/OutgoingAggregation:GroupedColumns", Role "Definition": A minimum of 1 object(s) is required ExtraShifts.wdcomponent WD_CPH_SEC_ExtraShift/src/packages/dk/cph/sec/wd/extrashifts/application
Please help me to resolve it.
Thanks,
Devender V

Hi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K

Error while deploying application to j2ee engine

HI,
I am getting the following error while deploying application to j2ee engine.
PluginName: WebDynpro Archive Builder
Plugin Id: com.sap.ide.webdynpro.archivebuilder
class: com.sap.ide.webdynpro.archivebuilder.PARBuilder
method: run()
message: problems encountered while deleting resources
excepton: org.eclipse.core.internal.resources.ResourceException:
problems encountered while deleting resources.
How to resolve this?
Please help me.
regards,
satish

Hi,
Check whether your workspace has any other .ear files. If yes, just delete those ear files and try creating the ear file for your application again. I had a similar problem and it got resolved by the above method.
Regards,
Mayuri

Error while building in LV8.2.1

I have a .bld file from LabVIEW 7.1. I'v converted this build script into a LV8.2 project. and I can run my program's VIs. When I try to make an exe build, LabVIEW goes through the build process. It's a large project and takes about an hour to build. After it loads and adds all the VIs and support VIs it finally get to the "Building Application" step and after a few minutes atthat step I get the following error:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 2 occurred at Invoke Node in ABAPI Dist Build App from LLB.vi->ABAPI Build Application.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Build_Invoke.vi->EBUIP_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Memory is full.
=========================
NI-488: No Listeners on the GPIB.
Method Name: Build:Application
I googled it and found some information and increased my virtual memory to 4GB and tried to build again, to the same results. Has anyone else run into as issue such as this? The build worked in LV7.1 just fine and the conversion process was about as painless as could be expected. Are there any known causes and, more importantly, fixes to this?
Gary

I can't give any specific help, but can offer a couple random musings. First, this error looks suspiciously like the one you get when you do unprotected division and then use the result to do something like initialize a buffer or set the number of iterations for a loop that is autoindexing one or more outputs. What happens is that because of an error or similar situation, the division ends up doing a divide by 0 operation which results in NaN. When this output hits a node expecting an integer (like the N on a FOR loop) this NaN is converted to a Very Large Number - something like 2.4 billion. In any case, LV then tries to preallocate enough memory for 2.4 billion iterations, runs out of memory and blows up.
My suspicion is that given the massive size of your application, you hit a limit in the builder that generated a similar scenario to the one above. BTW; how many VIs are there in your build?
A second alternative is that there is something in the code itself (besides its size) that the builder doesn't like - perhaps a remnant of the conversion from 7.1 to 8. This has caused problems in past migrations. (Version 5 was an absolute nightmare...)
Unfortunately, because NI locks the code for the builder about the only thing you can really do is report the problem to NI and hope they can duplicate it and get around to fixing it. In the mean time, you can do some experimenting and remove portions of the code until you get something that builds. The resulting application doesn't need to be able to actually run, just build successfully. Once you have something that builds, start adding stuff back in a bit at a time and try to gauge whether the failure occurs as a function of the number of VIs in your application to the presence of a particular VI in your build.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Error while running application

I am getting the following error while running application...Any help to fix this?
thanks
DeepaKarun
Application lmts-local is already deployed on other targets. Please use create-application-ref command to create reference to the specified target; requested operation cannot be completed
Exception=Deployment failed.
Deployment failed.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:210)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
C:\Creator\Projects\lmts-local\nbproject\build-impl.xml:530: Deployment failed.
BUILD FAILED (total time: 2 seconds)

I am able to identify and fix the problem....Some how even after re-installing the IDE the default server user and password fields are empty. I need to give them manually.

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

Error starting the Application Server and Deployment Tool in Windows 2000

After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?

Error While build: Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden

Hello,
There is an error while build EXE:
"Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden"
(in english like: a non-executable vi can not be saved without the corresponding block diagram)
the full message:
Beim Speichern folgender Datei trat ein Fehler auf:
C:\dev\...\xxx.vi
Informationen zum Lösen dieses Problems finden Sie auf der Seite ni.com/ask für Supportanfragen. Verwenden Sie folgende Informationen als Referenz:
Fehler 1502 bei AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclassave.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Mögliche Ursachen:
LabVIEW: Ein nicht ausführbares VI kann nicht ohne das dazugehörige Blockdiagramm gespeichert werden.
What is the problem? Should I remove checkbox to remove block diagram code?
Thanks
Eugen Wiebe
Bernstein AG
CLAD - Certified LabView Associate Developer

The exact wording of the error 1502 is:
"LabVIEW: Cannot save a bad VI without its block diagram."
Let me guess:
You have now a build script with "Enable Debugging" disabled. If you enable this option, building the EXE is possible, but the EXE will most likely not run. Correct?
It seems to me, that you either have a faulty LV installation or some of your VIs are corrupt. This is something which can happen randomly when upgrading projects from older LV versions. Masscompile/Force compile of the affected VIs CAN help, but it is no promise.
Please try to break down the issue to a set of VIs (maybe a 3rd party instrument driver?).
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Error while building application installer and exe

Similar Messages

Maybe you are looking for