Error while building report
I need to create a report that have 2 columns, which are sum of sales and count of customer (from 2 difference tables).
where i create a caculation-->COUNT_DISTINCT(customer_id)
and sum of sales. I hit the below error :-
"Invalid Combination of joins using different join keys - query cannot be resolved."
Is there any way to solve the error without using partition? I dont wan to use partition, because I need to create a new calculation when i create a new report.
Thanx for any suggestion or solution.
It is do with the fact that you have two different join conditions joining this table. Try disabling the
"the multiple join path detection option" in Discoverer Plus or Discoverer Desktop.
Similar Messages
-
Timeout error while running Report
Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
VishalAs Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30. -
IP Resource Errors While Building a Windows Failover Cluster on Azure
I have setup a failover cluster in Microsoft Azure on four VMs. I have two nodes in one subnet/region, one node in another subnet/region and a final node in a third subnet/region. The cluster passed the validation wizard and was successfully built, but the
two nodes in other subnets will not go online, reporting "Failed to bring the resource 'IP Address x.x.x.x' online".
Azure Vnet Setup
Vnet 1 - South Central US - 10.16.16.0/16 - Nodes 1 & 2 - Online
Vnet 2 - West US - 10.116.16.0/16 - Node 3 - Offline
Vnet 3 - East US - 10.216.16.0/16 - Node 4 - Offline
All three IP Address resources are DHCP. I've attempted to make them static but they still failed while coming online. If I click "Information Details" on the error I get:
Error code: 0x80071397
The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.
It seems to be an issue with the way Azure DHCP works, but I'm stalled. There must be a way to get his working. What am I missing?Hi Michael Lapidakis,
Starting in Windows Server 2008, a feature called an “OR dependency” was added to Failover Clustering which gave admins the ability to have nodes with a Network Name that
could use one IP Address OR another IP Address .In a multisite cluster, it is expected that 1 IP address is offline as it is an OR relationship.
You can refer the following related article to realize more detail settings of multi-site site cluster IP settings.
IP Resource Errors While Building a Windows Failover Cluster on Azure
https://social.technet.microsoft.com/Forums/en-US/ca2cbf5e-abef-4c23-9cff-7b6ca44acc23/ip-resource-errors-while-building-a-windows-failover-cluster-on-azure?forum=winserverClustering
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Error while building execution plan
Hi, I'm trying to create an execution plan with container EBS 11.5.10 and subject area Project Analytics.
I get this error while building:
PA-EBS11510
MESSAGE:::group TASK_GROUP_Load_PositionHierarchy for SIL_PositionDimensionHierarchy_PostChangeTmp is not found!!!
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.getExecutionPlanTasks(ExecutionPlanDesigner.java:818)
com.siebel.analytics.etl.execution.ExecutionPlanDesigner.design(ExecutionPlanDesigner.java:1267)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:169)
com.siebel.analytics.etl.client.util.tables.DefnBuildHelper.calculate(DefnBuildHelper.java:119)
com.siebel.analytics.etl.client.view.table.EtlDefnTable.doOperation(EtlDefnTable.java:169)
com.siebel.etl.gui.view.dialogs.WaitDialog.doOperation(WaitDialog.java:53)
com.siebel.etl.gui.view.dialogs.WaitDialog$WorkerThread.run(WaitDialog.java:85)
Sorry for my english, I'm french.
Thank you for helping meHi,
Find the what are all the subjectarea's in execution plan having the task 'SIL_PositionDimensionHierarchy_PostChangeTmp ', add the 'TASK_GROUP_Load_PositionHierarchy ' task group to those those subjectares.
Assemble your subject area's and build the execution plan again.
Thanks -
Error while building sample application "Developing an Order Application"
hi ,
I tried to create a simple Mobile application using the instructions for "Tutorial: Developing an Order Application for Handhelds" given at :-
http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/7294498d870ad3e10000000a11466f/frameset.htm
For the same , by using TCdoe SDOE_WB i created a new SWCV named ORDER_TAKER,
with a Data Object - > ORDER
added Data Object header node -> ORDERHEADER
The ORDERHEADER contains the following fields:
ORDERID CHAR8
CUSTID CHAR4
LONGTEXT CHAR32
SERVICEUNIT CHAR32
CREATED_ON DATS
CREATED_AT TIMS
As per the tutorial I created Mobile Service Component as "order_sv". under which created Data Objects , and a service name orderService . Now when I copied the code of Defining the Custom Methods , I am getting following error while building the MSC........
Line: -----
* [javac] Compiling 8 source files to C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\classes
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:43: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: if( !(((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).getOrderOrderheaders().size() > 0))
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class OrderOrderheader
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:45: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OrderOrderheader order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:49: cannot find symbol
[javac] ERROR: symbol : method valueOf(java.lang.String)
[javac] ERROR: location: class java.util.Date
[javac] ERROR: order.setCreatedOn(Date.valueOf("2007-06-30"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:50: cannot find symbol
[javac] ERROR: symbol : variable Time
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order.setCreatedAt(Time.valueOf("08:45:00"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : class Order_svModel
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:73: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order = ((Order_svModel)OcaRoot.getInstance().getModel(Order_svModel.class)).createOrderOrderheader();
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:77: cannot find symbol
[javac] ERROR: symbol : method valueOf(java.lang.String)
[javac] ERROR: location: class java.util.Date
[javac] ERROR: order.setCreatedOn(Date.valueOf("2007-07-05"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:78: cannot find symbol
[javac] ERROR: symbol : variable Time
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: order.setCreatedAt(Time.valueOf("10:00:00"));
[javac] ERROR: ^
[javac] ERROR: C:\workspace.jdi\LocalDevelopment\t\13A34929B4F509E8F4914E0DFB74D38E\gen_oca\com\sap\demo\order_sv\service\impl\OrderService.java:80: cannot find symbol
[javac] ERROR: symbol : variable OcaRoot
[javac] ERROR: location: class com.sap.demo.order_sv.service.impl.OrderService
[javac] ERROR: OcaRoot.getInstance().commit();
[javac] ERROR: ^
[javac] 30 errors *
Line: -----
Please help...........
Ekam
Edited by: Ekam Preet Singh on Sep 29, 2011 10:32 AMHi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K -
Error while generating report in RAR
Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DKHello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant -
Failed to commit objects to server. Error while publishing reports from BW
Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-) -
I am getting following error while displaying report in sap business one-
<b>Internal error (-101) occured [Message 131-183]</b>
I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.Hi Yogesh,
I haven't installed any patch on my client machine.
Regards,
Dilip Kumbhar -
Error while instantiating report Z_RD_ABSENCE_REPORT
Hi Guys,
we have just patched BWD, and while testing the broadcast setting i came across the following error.
Error while instantiating report Z_RD_ABSENCE_REPORT
Notification Number RSBOLAP 014
I am opening report designer and when i publish via Bex Broadcaster this message is shown. I have checked SDN and sap market place but most of the soultion seem to focus on WAD.
My feeling is that it is a JAVA error and is somethng basis might be able to fix.
Please can anyone let me know if they have come across this problem before, and help would be much appriciated.
Thanks
ForhadHello Forhad,
RSBOLAP 014 is a issue regarding communication between ABAP (backend ) VS BI Java side.
Read the note 937697 and follow his manual instructions.
This note will start the BI Diagnostics. There you will see a red mark with RSBOLAP issue. COrrect this red mark following the recommendation on "Action" field.
Good luck.
Edward S. John -
Error while opening report in Infoview
I am getting following error while opening report in Infoview.
Following is error generated in tomcat,
com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at javax.xml.parsers.SAXParser.parse(Unknown Source)
at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
Please help me to resolve the above problem
Reagrds,
RameshHi Ramesh,
It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
You need to give some more info and even then it would probably be a good idea to call support.
Can you tell us;
Which version are you on?
Can you open de document from another desktop intelligence machine, not only the one that it was built on?
- This checks ; you can import the document; the structure of the document is fine (not corrupted).
Can you refresh the document on that other machine?
- This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
What is your preference as a BOE user to view Deski documents?
- Try a few others, so you know if the problem is with one type only (and which).
Now you will have a few more pointers more as to where the problem lies.
Even then it can be sheer size of the document, complexity of it, etc.
Good luck,
Marianne -
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
Error while running report 10g
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(1000);
rep_status VARCHAR2(2000);
BEGIN
repid := find_report_object('REPORT2');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(repid, report_comm_mode, 1);
set_report_object_property(repid, report_destype, cache);
set_report_object_property(repid, report_desformat, 'PDF');
set_report_object_property(repid, report_server, 'myserver');
v_rep := run_report_object(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
message(rep_status);
IF rep_status = 'FINISHED'
THEN
web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
|| '?server = myserver');
ELSE
message('error while running reports-object ' || error_text);
message(' ');
clear_message;
END IF;
EXCEPTION
WHEN OTHERS THEN
message('error while running reports-object' || error_text );
END;
I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.Hi,
Check this link...How to call a report in Forms 10g ?
Hope this works...
Hamid -
Error while building SUP based iphone client application
Hi,
I am getting the following error while building the application for iphone simulator. I tried by changing search path settings and added libraries to Link binary search path.I really stuck here. Any body please help me how to solve it.
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_SUPMessageClient", referenced from:
objc-class-ref in SUP101AppDelegate.o
"_OBJC_CLASS_$_MBOLogger", referenced from:
objc-class-ref in SUP101AppDelegate.o
objc-class-ref in SUP101CallbackHandler.o
Thanks in advance
BalaHi Rockky/Wang
I have added the following libraries to "Link Binary with Libraries" . I am using xcode 4.0.2 , SDK 4.3 and MAC-OS 10.6 . Libraries are belongs to SUP 1.5.5. simulator-- iphonesimulator 4.3
AddressBook.framework
CoreFoundation.framework
QuartzCore.framework
Security.framework
libicucore.A.dylib
libstdc++6.dylib
libz.1.2.3.dylib
libclientrt.a
libMO.a
libSUPObj.a
After adding all these libraries automatically added path to "Link search path" as follows
$(inherited)
"$(DEVELOPER_DIR)/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator4.3.sdk/usr/lib"
"$(SRCROOT)/../../../libs/Debug-iphonesimulator"
Header search path i have given as following
"/Users/RavuriB/includes/**"
"/Users/RavuriB/TravelRequestMAP/Generated Code/**"
Still i am getting the same error
Undefined symbols for architecture i386:
"_OBJC_CLASS_$_MBOLogger", referenced from:
objc-class-ref in SUP101CallbackHandler.o
"_OBJC_METACLASS_$_SUPDefaultCallbackHandler", referenced from:
OBJCMETACLASS_$_SUP101CallbackHandler in SUP101CallbackHandler.o
"_OBJC_CLASS_$_SUPDefaultCallbackHandler", referenced from:
OBJCCLASS_$_SUP101CallbackHandler in SUP101CallbackHandler.o
ld: symbol(s) not found for architecture i386
collect2: ld returned 1 exit status
i tried by changing paths differently but no luck.
is that SUP 1.5.5 version is suitable for the xcode version and SDK?. Am I forgot to add any frameworks ? or any thing i need to change. I am really stuck at this problem . Can you Please help me to come out of this problem.
Thanks & Regards
Bala -
hi ,
I m getting an error while building flex application
Error Description
"An internal Build Error has occured" Right click for more
information"
In my flex application there are around 5000 line of code .
i am binding 2000 Xml to the application
this much line of code causing a error
Please Help Me out
ThanXCode Snippet could be useful here in us understanding the issue.
-
Error while building Webdynpro application
Hi all,
I am getting error while building web dynpro application.
Error is as :
Error Web Dynpro Generation: Metadata constraint of Component ExtraShifts is violated: ViewElementAggregation "//WebDynpro/View:dk.cph.sec.wd.extrashifts.application.ExtraShiftsView/RootUIElementContainer/Child:OuterGroup/Child:TuesdayGroup/Child:TuesdayTable/OutgoingAggregation:GroupedColumns", Role "Definition": A minimum of 1 object(s) is required ExtraShifts.wdcomponent WD_CPH_SEC_ExtraShift/src/packages/dk/cph/sec/wd/extrashifts/application
Please help me to resolve it.
Thanks,
Devender VHi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K
Maybe you are looking for
-
So I tried to upgrade to Mavericks today and it failed (same error as in this post which seemed to be a common problem). It wouldn't let me repair the disk, and after trying all sorts I rebooted my computer in recovery mode - it wouldn't let me reins
-
Hello. I have been attempting to remove a blank page from a document that I have created in the Pages v 4.3. I have turned on invisibles, thumbnail view, etc and other fixes that have been offered to other individuals with this same conundrum. Nothin
-
Profit cebter and copany code configuration issue
i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company code in profit segment as GB03, but now i am getting as GB01. is this related to any configuration issue, please let me know.
-
Maximum number of st unit in single bin
Hi All, Can anybody tell me maximum how much storage unit can be present in the Bin. Dev
-
[SOLVED] KDE4 kdm symbol lookup error in libQtSvg.so.4
Hello, I'm running 32-bit. After pacman updated KDE, kdm doesn't start anymore. kdm.log shows this error: /usr/lib/kde4/libexec/kdm_greet: symbol lookup error: /usr/lib/libQtSvg.so.4: undefined symbol I tried reinstalling kdebase-workspace and qt to