Error while calculating the net present value
Dear experts,
Please help me in solving the following error.
I am trying to do project vaibility analysis through pre investment analysis in appropriation request, interm I'm trying to calculate the IRR for the project.
I have created the appropriation request and given all the data in that including the planed values for the project.
In Variants tab of appropriation request, preinv. analysis sub tab, i have clicked the button Calculate preinvestment analysis figures , ( I hvae not mentioned any values in that screen, its picking the plan cost from the planed values of the appropriation request) there I'm getting an error saying
Error while calculating the net present value
If I open the message it is as follows:
Error while calculating the net present value*
*Message no. AO215*
Diagnosis
An error occurred during calculation of the net present value.
The yield curve for determining the net present value is not completely maintained. Possible causes are:
1. Evaluation type IM01 does not exist (table ATSYC).
2. Yield curve types 9990 (bid) and 9991 (ask) have not been created (table JBD14) for the currency of the controlling area of the appropriation request.
3. Reference interest rates have not been created for the yield curves (tables T056R and JBD15).
4. Interest rates are not maintained for the complete planning time period for the reference interest rates.
5. Under certain circumstances, the standard exchange rate types 'G' and 'B' may be inconsistent.
Procedure
Check your Customizing settings:
1. SAP supplies the evaluation types.
Remember, SAP supplies the evaluation types in client 000. You have to copy them into your working clients. If you do not have them in your system, you can create them in Customizing for the Treasury component (Treasury Management -> Market Risk Management -> Evaluations -> Define Default Settings). Create evaluation type IM01 with bid yield curve type 9990 and ask yield curve type 9991.
2. In Customizing for appropriation requests (under Planning), create a bid yield curve type 9990 and an ask yield curve type for the currency of the controlling area of the appropriation request.
3. Create at least one reference interest rate for each yield curve.
4. Maintain the reference rates, starting at the minimum fron the point at which you you have planned costs or revenue.
5. Check Customizing of the exchange rate types 'G' and 'B' in the IMG under Global Settings -> Currencies.
I have checked all the procedures of the said customization and the values are similar to that of the error message, but still I'm unable to proceed further.
I have goe through the note 160375, but did not succeed on this issue.
Can any one help me out in solving the above error and also can any one explain me the process in SAP to calculate IRR?
Is there any more customization missing or whats wrong going in that process?
Please help me out...
Thanks in advance..
Regards,
Praveen.
Are you installing a Demo version of NetWeaver? If so please post your questions and search for answers here: SAP NetWeaver Application Server
If this a real full blown system please contact the OSS, via the Marketplace (service.sap.com) or by OSS transaction in your SAP System.
Similar Messages
-
Error while changing the PO BOX value for a Business partner
Hi Friends,
We are getting an error when we try to change the PO Box value for a Business Partner.
We have the dependency like when we give the value for the PO Box we also need to give the postal code value. And also we have a specific format for the Postal code. We gave both the values (a valid postal code) and try to save the details, then error message "The attribute GUID of Organization (a Contact Person is assigned to) of the Business Object contact person is not valid" is displayed. We have no clue why there is a conflict for the contact person details.
Can any one suggest the reason for this?
Thanks & regards,
Swarna SeetaHi Swarna,
You are getting this message not because you have entered wrong Post code .It will come even if you try to change some other field and save it. This is because on saving a business object, the framework tries to validate all the associated objects depending on the relation.In this case the data in the mobile client is either not present or is no longer valid.
Check if the field of the Business object which is being shown as invalid, has some data in the table. Check the combo associated to it and from where the combo is doing the validation. The table from where the combo is doing the validation does not have that data and so the value is invalid.
Also compare the number of entries in smokna1sht table in ides and in CDB.
Regards
Vivek -
Calculation View computing 1 million net present values using BFL procedure
Hi,
i have around 1 Million financial positions in a position table and for each of them i want to calculate the net present value using SAP HANA BFL procedure _SYS_AFL.AFLBFL_NETPRESENTVALUE_PROC. The necessary cash flows, interests, etc. (used as input for the BFL procedure reside in a cash flow table
To make it nice i would like to use a HANA calculation view, which provides the position table together with a calculated field NETPRESENTVALUE
Now my question: How can i do this the fastest way? The challenge i see is, that the BFL procedure allows only the calculation of one net present value result at a time (based on the cash flows of one financial position).
So i am afraid i have to use
DECLARE CURSOR l_position_cursor ...
FOR l_position_row as l_position_cursor DO
CALL _SYS_AFL.AFLBFL_NETPRESENTVALUE_PROC ...;
END FOR;
Do you have any better / more performant ideas?
Thanks for any idea,
GuntherDoes the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj -
How salvage value will be treated while calculating the depreciation
Hi,
while calculating depreciation how salvage value will be treated depreciable base?
Thanks & Regards
Sap GuruIf APC value is 10000 and salvage Value is 500 then the depreciation will be calculated as net of these two values and calcluates the depreciation.
| am not able to understand the your doubt correctly.
sarma -
Getting the following error while parsing the values usng xml parser
Hi
I am getting the following error while parsing the values using the code in r12 instance on linux
declare
XML_PARSER XMLPARSER.PARSER;
DOC XMLDOM.DOMDOCUMENT;
DOCELEMENT DBMS_XMLDOM.DOMELEMENT;
BEGIN
-- NEW PARSER
XML_PARSER := XMLPARSER.NEWPARSER;
-- SET SOME CHARACTERISTICS
XMLPARSER.SETVALIDATIONMODE(XML_PARSER, FALSE);
IF P_DIR IS NOT NULL AND P_FILENAME IS NOT NULL
THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,'DIRECTORY FOUND'||'-'||P_DIR);
XMLPARSER.SETBASEDIR(XML_PARSER, P_DIR);
-- PARSE INPUT FILE
FND_FILE.PUT_LINE(FND_FILE.LOG,'FILE FOUND'||'-'||P_FILENAME);
XMLPARSER.PARSE(XML_PARSER, P_DIR || '/' || P_FILENAME);
-- GET DOCUMENT
DOC := XMLPARSER.GETDOCUMENT(XML_PARSER);
LOAD_SUPP(doc);
ELSE
DBMS_OUTPUT.PUT_LINE('DIRACTORY/FILENAME CANNOT BE NULL');
END IF;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('DATA NOTINSERTED'||sqlerrm);
ROLLBACK;
END
I am getting the following error
DIRACTORYL-/home/appldevORA-0000: normal, successful completion
FILE NAME-suppliersample_data.xmlORA-0000: normal, successful completion
DATA NOTINSERTEDORA-31001: Invalid resource handle or path name "/home/appldev/suppliersample_data.xml"
ORA-06512: at "SYS.XDBURITYPE", line 11
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 142
ORA-29280: invalid directory path
ORA-29280: invalid directory path
ORA-29280: invalid directory path
It could be great if some one could give a suggestion/solution.
Thanks
AjeshBesides this is not the correct forum try to google the error message first before posting:
http://ora-29280.ora-code.com/
cheers -
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
I activated all 0* objects in BTMP and checked that they are all activated, but I found errors when opening the BEx Web Analyzer
Error messages :
Error while loading the Web template "0ANALYSIS_PATTERN" (return value "4")
ERROR: Command type SWITCH_AXES of object not recognized
ERROR: Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
So I ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version D report to check and choose validate.
Error messages :
Template Include Item HEADER_TEMPLATE unresolved or empty. Close and reopen template.
Template Include Item FOOTER_TEMPLATE unresolved or empty. Close and reopen template.
Width of object item:GROUP_ITEM:GROUP_ITEM_1 is very small (1amp;1)
Query does not exist in the BI System (Object QU )
Cannot instantiate data provider
I also ran RS_TEMPLATE_MAINTAIN_70 (0ANALYSIS_PATTERN) version A and got the following errors:
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Command type SWITCH_AXES of object not recognized
Parameter GENERAL_TEXT_ELEMENT not recognized; check your metadata
Parameter GENERAL_TEXT_ELEMENT of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command type SWITCH_AXES of object item:GROUP_ITEM:GROUP_ITEM_1 not recognized
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Command SWITCH_AXES cannot be located in parameter ACTION
Parameter GENERIC_TEXT_BINDING of object item:GROUP_ITEM:GROUP_ITEM_1 cannot be higher-level node of GENERAL_TEXT_ELEMENT
Item item:GROUP_ITEM:GROUP_ITEM_1 of type DROPDOWN_ITEM cannot be a parent node of DATA_PROVIDER_REF
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_POSITION
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_VISIBLE
Item item:GROUP_ITEM:GROUP_ITEM_1 of type CHART_ITEM cannot be a parent node of LEGEND_ONLY
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
Invalid parameter value for parameter ACTION in object item:GROUP_ITEM:GROUP_ITEM_1
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
bi-Tag bi:item has unknown attribute key. Please check your spelling
What could be the problem?hi,
Please look into this note let me it helps...url=https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=917950&_NLANG=E]Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web[/url]
check this link as well for [<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943">Bex Web Configuration</a>
wht is the SP Level?
Nagesh Ganisetti. -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Fatal error while executing the DQS installer on SQL Server 2014
Hi all.
I am receiving the following error when attempting to install DQS on the following platform:
Windows Server 2012
Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
(no entries in event viewer)
Error is:
[4/15/2015 8:45:04 AM] Fatal error while executing the DQS installer.
Microsoft.Ssdqs.Proxy.ImportExport.ImportExportException: Error occurred in a server proxy call during the import/export process. ---> Microsoft.Ssdqs.Proxy.ImportExport.ImportProcessFailedException: System.NullReferenceException: Object reference not set
to an instance of an object.
at System.Security.Cryptography.CryptoStream..ctor(Stream stream, ICryptoTransform transform, CryptoStreamMode mode)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportReader..ctor(Stream stream)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportManager.Import(Stream input)
at Microsoft.Ssdqs.ImportExportManagement.Calibrator.ImportKnowledgebaseCalibrator.Calibrate(IMasterContext masterContext, CalibrationMode calibrationMode, ConfigurationDomParameter calibratorConfiguration)
at Microsoft.Ssdqs.Core.Service.Calibration.Impl.ExecuteCalibratorFlow.Process(IMasterContext context)
--- End of inner exception stack trace ---
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.WaitUntillProcessCompletes(Int64 processId, Int64 knowledgebaseId, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.KnowledgebaseImport(String kbName, String kbDescription, String fileName, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.LoadOutOfTheBoxDataAction.Execute()
at Microsoft.Ssdqs.DqsInstaller.Logic.ActionExecuter.ExecuteAllActions()
at Microsoft.Ssdqs.DqsInstaller.Logic.Installer.Main(String[] args)
Thanks for any advice you can give.
Full log below:
Microsoft (R) DQS Installer Command Line Tool
Copyright (c) 2014 Microsoft. All rights reserved.
[4/15/2015 7:58:20 AM] DQS Installer started. Installation log will be written to C:\Program Files\Microsoft SQL Server\MSSQL12.DW01\MSSQL\Log\DQS_install.log
[4/15/2015 7:58:20 AM] Setting the collation to default value: SQL_Latin1_General_CP1_CI_AS
[4/15/2015 7:58:20 AM] Using instance: DW01, catalog: DQS.
[4/15/2015 7:58:20 AM] Executing action: Validate collation argument.
[4/15/2015 7:58:20 AM] Action 'Validate collation argument' finished successfully.
[4/15/2015 7:58:20 AM] Executing action: Check whether system reboot is pending.
[4/15/2015 7:58:20 AM] Action 'Check whether system reboot is pending' finished successfully.
[4/15/2015 7:58:20 AM] Executing action: Create data quality event source.
[4/15/2015 7:58:20 AM] Action 'Create data quality event source' finished successfully.
[4/15/2015 7:58:20 AM] Executing action: Request Database Master Key password from user..
Microsoft (R) DQS Installer Command Line Tool
Copyright (c) 2014 Microsoft. All rights reserved.
[4/15/2015 8:39:59 AM] DQS Installer started. Installation log will be written to C:\Program Files\Microsoft SQL Server\MSSQL12.DW01\MSSQL\Log\DQS_install.log
[4/15/2015 8:39:59 AM] Parsing DqsInstaller command line arguments.
[4/15/2015 8:39:59 AM] Setting the catalog to default value: DQS
[4/15/2015 8:39:59 AM] Setting the collation to default value: SQL_Latin1_General_CP1_CI_AS
[4/15/2015 8:39:59 AM] Using instance: DEV01, catalog: DQS.
[4/15/2015 8:39:59 AM] Executing action: Validate collation argument.
[4/15/2015 8:39:59 AM] Action 'Validate collation argument' finished successfully.
[4/15/2015 8:39:59 AM] Executing action: Check whether system reboot is pending.
[4/15/2015 8:39:59 AM] Action 'Check whether system reboot is pending' finished successfully.
[4/15/2015 8:39:59 AM] Executing action: Create data quality event source.
[4/15/2015 8:39:59 AM] Action 'Create data quality event source' finished successfully.
[4/15/2015 8:39:59 AM] Executing action: Request Database Master Key password from user..
[4/15/2015 8:41:05 AM] Action 'Request Database Master Key password from user.' finished successfully.
[4/15/2015 8:41:05 AM] Executing action: Approve removal of data quality services previous schema.
[4/15/2015 8:41:05 AM] Action 'Approve removal of data quality services previous schema' finished successfully.
[4/15/2015 8:41:05 AM] Executing action: Load Installation Scripts.
[4/15/2015 8:41:05 AM] Extracting script to: C:\Users\SqlServiceAcct\AppData\Local\Temp\3mo2vwbu.xch
[4/15/2015 8:41:06 AM] Extracting script: db\create_core_db_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\create_logic_db_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\create_transient_db_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\static_data.sql
[4/15/2015 8:41:06 AM] Extracting script: db\drop_dq_databases.sql
[4/15/2015 8:41:06 AM] Extracting script: db\db_version.sql
[4/15/2015 8:41:06 AM] Extracting script: helper\DeleteSchemaDs.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_all_assemblies.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\create_databases.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_databases.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_all_tables.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_database_properties.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\master_create.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\master_recreate.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\register_assemblies.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\register_assemblies_tsql.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\register_dq_assemblies.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\create_service_broker_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: sql\drop_service_broker_objects.sql
[4/15/2015 8:41:06 AM] Extracting script: db\set_dq_databases_single_user.sql
[4/15/2015 8:41:06 AM] Extracting script: db\set_dq_databases_multi_user.sql
[4/15/2015 8:41:06 AM] Extracting script: db\upgrade_all_versions.sql
[4/15/2015 8:41:06 AM] Extracting script: recreate_schema.bat
[4/15/2015 8:41:06 AM] Extracting script: upgrade_schema.bat
[4/15/2015 8:41:06 AM] Extracting script: upgrade_version_tables.bat
[4/15/2015 8:41:06 AM] Extracting script: drop_databases.cmd
[4/15/2015 8:41:06 AM] Extracting script: register_dlls.cmd
[4/15/2015 8:41:06 AM] Extracting script: unregister_dlls.cmd
[4/15/2015 8:41:06 AM] Extracting script: assembly_paths_retail.txt
[4/15/2015 8:41:06 AM] Extracting script: DQS_Data.dqs
[4/15/2015 8:41:06 AM] Extracting script: DefaultKbs.xml
[4/15/2015 8:41:06 AM] Total scripts extracted: 31
[4/15/2015 8:41:06 AM] Action 'Load Installation Scripts' finished successfully.
[4/15/2015 8:41:06 AM] Executing action: Create data quality schema.
[4/15/2015 8:41:06 AM] Script: 'recreate_schema.bat CMTSQLSVR04\DEV01 DQS SQL_Latin1_General_CP1_CI_AS'
[4/15/2015 8:41:06 AM] . Trying to connect using Windows Authentication and db name...
[4/15/2015 8:41:06 AM] Run create_databases.sql to create Data Quality Service databases if they do not exist.
[4/15/2015 8:41:07 AM]
[4/15/2015 8:41:07 AM] --> Running File: create_databases.sql
[4/15/2015 8:41:07 AM] ---[ Creating databases ]---
[4/15/2015 8:41:07 AM] Changed database context to 'master'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_dq_database.sql
[4/15/2015 8:41:10 AM] ---[ Dropping Data Quality Databases ]---
[4/15/2015 8:41:10 AM] Creating DQS databases (DQS_MAIN, DQS_PROJECTS, DQS_STAGING_DATA)...
[4/15/2015 8:41:10 AM] Configuring DQS databases
[4/15/2015 8:41:10 AM] Configuration option 'clr enabled' changed from 0 to 1. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Configuration option 'xp_cmdshell' changed from 0 to 1. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Creating Master Key for database DQS_MAIN...
[4/15/2015 8:41:10 AM] Creating Module Signing Certificate for database DQS_MAIN...
[4/15/2015 8:41:10 AM] Exporting Certificate from DQS_MAIN
[4/15/2015 8:41:10 AM] Importing Certificate into DQS_PROJECTS
[4/15/2015 8:41:10 AM] Configuration option 'xp_cmdshell' changed from 1 to 0. Run the RECONFIGURE statement to install.
[4/15/2015 8:41:10 AM] Creating DQS roles
[4/15/2015 8:41:10 AM] Run master_recreate.sql to recreate Data Quality Service Main and Projects Databases and drop all tables including known temporary tables.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running master_recreate.sql
[4/15/2015 8:41:10 AM] ---[ Recreate DQS Main and Projects Databases ]---
[4/15/2015 8:41:10 AM] Changed database context to 'DQS_STAGING_DATA'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_database_properties.sql
[4/15/2015 8:41:10 AM] ---[ Dropping Database Properties]---
[4/15/2015 8:41:10 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_all_tables.sql
[4/15/2015 8:41:10 AM] ---[ Dropping all SSDQS Database objects and KB schemas ]---
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all Symmetric Keys ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all Certificates ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all FK constraints ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all views ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all tables and synonyms ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all database triggers ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all stored procedures in Knowledge Base schemas ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all types in Knowledge Base schemas ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --[ Drop all Knowledge Base schemas ]
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_database_properties.sql
[4/15/2015 8:41:10 AM] ---[ Dropping Database Properties]---
[4/15/2015 8:41:10 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:10 AM]
[4/15/2015 8:41:10 AM] --> Running File: drop_all_tables.sql
[4/15/2015 8:41:10 AM] ---[ Dropping all SSDQS Database objects and KB schemas ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all Symmetric Keys ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all Certificates ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all FK constraints ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all views ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all tables and synonyms ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all database triggers ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all stored procedures in Knowledge Base schemas ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all types in Knowledge Base schemas ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --[ Drop all Knowledge Base schemas ]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: drop_database_properties.sql
[4/15/2015 8:41:11 AM] ---[ Dropping Database Properties]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running master_create.sql
[4/15/2015 8:41:11 AM] ---[ Creating and Populating Main DQS DB ]---
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_STAGING_DATA'.
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: create_core_db_objects.sql
[4/15/2015 8:41:11 AM] ---[ Creating Certificates ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] ---[ Creating Symmetric Keys ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] ---[ Creating Tables ]---
[4/15/2015 8:41:11 AM] Creating Table: A_TEST
[4/15/2015 8:41:11 AM] Creating Table: A_TEST2
[4/15/2015 8:41:11 AM] Creating Table: A_FLOW
[4/15/2015 8:41:11 AM] Creating Table: A_FLOW_ANSWER
[4/15/2015 8:41:11 AM] Creating Table: A_EXECUTION_UNIT
[4/15/2015 8:41:11 AM] Creating Table: A_CODE_GROUP
[4/15/2015 8:41:11 AM] Creating Table: A_CODE_MEMBER
[4/15/2015 8:41:11 AM] Creating Table: A_CONFIGURATION
[4/15/2015 8:41:11 AM] Creating Table: A_PROCESS
[4/15/2015 8:41:11 AM] Creating Table: A_SERVICE_BROKER_TASK
[4/15/2015 8:41:11 AM] Creating Table: A_KNOWLEDGEBASE
[4/15/2015 8:41:11 AM] Creating Table: A_KNOWLEDGEBASE_AUDIT
[4/15/2015 8:41:11 AM] Creating Table: A_KNOWLEDGEBASE_ACTIVITY
[4/15/2015 8:41:11 AM] Creating Table: A_PROFILING_ACTIVITY_ARCHIVE
[4/15/2015 8:41:11 AM] Creating Table: A_CLIENT_SESSION
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_PROVIDER
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_PROVIDER_SCHEMA
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_CACHE
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_CACHE_SUGGESTION
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_CACHE_SUGGESTION_PARSED
[4/15/2015 8:41:11 AM] Creating Table: A_REFERENCE_DATA_AUDIT
[4/15/2015 8:41:11 AM] Creating Table: A_IMPORTED_PROJECT
[4/15/2015 8:41:11 AM] Creating Table: A_SPELLER_DICTIONARY_VALUE
[4/15/2015 8:41:11 AM] Creating Table: A_SPECIAL_CHARACTER_RULE
[4/15/2015 8:41:11 AM] Creating Table: A_PERSISTENT_CACHE
[4/15/2015 8:41:11 AM] Creating Table: A_TEMPLATE_OBJECTS
[4/15/2015 8:41:11 AM] Creating Table: A_TEMPLATE_FOREIGN_KEYS
[4/15/2015 8:41:11 AM] Creating Table: A_TEMPLATE_COLUMNS
[4/15/2015 8:41:11 AM] ---[ Creating Views ]---
[4/15/2015 8:41:11 AM] Creating View: V_A_FLOW
[4/15/2015 8:41:11 AM] Creating View: V_A_KNOWLEDGEBASE
[4/15/2015 8:41:11 AM] Creating View: V_A_KNOWLEDGEBASE_AUDIT
[4/15/2015 8:41:11 AM] Creating View: V_A_REFERENCE_DATA_PROVIDER
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: static_data.sql
[4/15/2015 8:41:11 AM] ---[ Inserting Data ]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Cleansing configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Logging settings section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Logging settings section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Association configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert DataValueService configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Association rules configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert IndexService configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Knowledgebase configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Notification configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert Interactive Cleansing configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Reference Data configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert client paging configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Insert client process sampling configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Matching configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Profiling configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Process configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[FileStorageManager configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[ImportExportManager configuration section]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Reference Data Add provider]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Reference Data Add provider schema]---
[4/15/2015 8:41:11 AM] ---[Add Special characters for term normalization]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] --> Running File: db_version.sql
[4/15/2015 8:41:11 AM] ---[ Running version related work ]---
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION_INFO
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION_UPGRADE_SCRIPTS
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION_UPGADE_SCRIPT_PATH
[4/15/2015 8:41:11 AM] Creating view: V_DB_VERSION
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version information]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (0 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts path]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] ---[Add DB Version upgrade scripts path]---
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] (1 rows affected)
[4/15/2015 8:41:11 AM] Changed database context to 'DQS_PROJECTS'.
[4/15/2015 8:41:11 AM] Creating Table: A_DB_VERSION in PROJECTS database
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM]
[4/15/2015 8:41:11 AM] Action 'Create data quality schema' finished successfully.
[4/15/2015 8:41:11 AM] Executing action: Register data quality assemblies and stored procedures.
[4/15/2015 8:41:11 AM] Script: 'register_dlls.cmd CMTSQLSVR04\DEV01 DQS'
[4/15/2015 8:41:12 AM] . Trying to connect using Windows Authentication and db name...
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Running File: drop_all_assemblies.sql
[4/15/2015 8:41:12 AM] ---[ Dropping all SSDQS Executable Objects ]---
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all SSDQS Types
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all SSDQS Assemblies
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all SSDQS Schemas
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop all CLR Assemblies
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Drop DQ startup stored procedure DQInitDQS_MAIN
[4/15/2015 8:41:12 AM] Changed database context to 'master'.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Running File: drop_service_broker_objects.sql
[4/15/2015 8:41:12 AM] ---[ Dropping all SSDQS Service Broker Objects ]---
[4/15/2015 8:41:12 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:12 AM] Dropping Service Broker Services.
[4/15/2015 8:41:12 AM] Dropping Service Broker Queues.
[4/15/2015 8:41:12 AM] Dropping Service Broker Contracts.
[4/15/2015 8:41:12 AM] Dropping Service Broker Messages.
[4/15/2015 8:41:12 AM] Completed - Service Broker objects dropped.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Running register_assemblies.sql
[4/15/2015 8:41:12 AM] ---[ Registering Assemblies ]---
[4/15/2015 8:41:12 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] --> Registering Assemblies
[4/15/2015 8:41:12 AM] The following Warnings are benign to DQSInstaller and may be ignored.
[4/15/2015 8:41:12 AM]
[4/15/2015 8:41:12 AM] * Register .NET dependency assemblies
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.management, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.configuration.install, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'smdiagnostics, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.windows.forms, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.drawing, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'accessibility, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.serialization.formatters.soap, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the
SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:25 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.jscript, version=10.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:26 AM] Warning: The Microsoft .NET Framework assembly 'system.management.instrumentation, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:27 AM] Warning: The Microsoft .NET Framework assembly 'system.messaging, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:27 AM] Warning: The Microsoft .NET Framework assembly 'system.directoryservices, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.enterpriseservices, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=amd64.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.remoting, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.web, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=amd64.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.framework, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.xaml, version=4.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.runtime.caching, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.utilities.v4.0, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.directoryservices.protocols, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server
hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.design, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.drawing.design, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.web.regularexpressions, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.build.tasks.v4.0, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted
environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] Warning: The Microsoft .NET Framework assembly 'system.serviceprocess, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:44 AM] * Register Microsoft.Practices assemblies
[4/15/2015 8:41:47 AM] Warning: The Microsoft .NET Framework assembly 'microsoft.csharp, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:47 AM] Warning: The Microsoft .NET Framework assembly 'system.dynamic, version=4.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in the SQL Server hosted environment
and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
[4/15/2015 8:41:47 AM]
[4/15/2015 8:41:47 AM] The preceding Warnings are benign to DQSInstaller and may be ignored.
[4/15/2015 8:41:48 AM]
[4/15/2015 8:41:48 AM] --> Running register_dq_assemblies.sql
[4/15/2015 8:41:48 AM] ---[ Registering Data Quality assemblies ]---
[4/15/2015 8:41:49 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.infra, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:50 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.core, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:51 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.dataservice, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:51 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.referencedata, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:52 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.index, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:52 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.associationrules, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:53 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.datavalueservice, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:54 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.domainrules, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:54 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.cleansing, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:55 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.association, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:55 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.flow, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:56 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs.matching, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:57 AM] Warning: The SQL Server client assembly 'microsoft.ssdqs, version=12.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
[4/15/2015 8:41:57 AM] Resource file was not copied
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] --> Running register_assemblies_tsql.sql
[4/15/2015 8:41:57 AM] ---[ Registering Assemblies for TSQL]---
[4/15/2015 8:41:57 AM] Changed database context to 'master'.
[4/15/2015 8:41:57 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Clear the Code Member Table A_CODE_MEMBER.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] (0 rows affected)
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Clear the Code Group Table A_CODE_GROUP.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] (0 rows affected)
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Register assemblies T-SQL executable objects
[4/15/2015 8:41:57 AM] - Creating assemblies T-SQL registeration stored procedure.
[4/15/2015 8:41:57 AM]
[4/15/2015 8:41:57 AM] * Creating the internal_core schema
[4/15/2015 8:41:57 AM] - Registering Microsoft.Ssdqs.Infra T-SQL executable objects.
[4/15/2015 8:42:05 AM] - Registering Microsoft.Ssdqs.Core T-SQL executable objects.
[4/15/2015 8:42:11 AM] - Registering Microsoft.Ssdqs.DataService T-SQL executable objects.
[4/15/2015 8:42:16 AM] - Registering Microsoft.Ssdqs.ReferenceData T-SQL executable objects.
[4/15/2015 8:42:21 AM] - Registering Microsoft.Ssdqs.Index T-SQL executable objects.
[4/15/2015 8:42:26 AM] - Registering Microsoft.Ssdqs.Cleansing T-SQL executable objects.
[4/15/2015 8:42:32 AM] - Registering Microsoft.Ssdqs.Association T-SQL executable objects.
[4/15/2015 8:42:37 AM] - Registering Microsoft.Ssdqs.Flow T-SQL executable objects.
[4/15/2015 8:42:42 AM] - Registering Microsoft.Ssdqs T-SQL executable objects.
[4/15/2015 8:42:51 AM] - Registering Microsoft.Ssdqs.DataValueService T-SQL executable objects.
[4/15/2015 8:42:56 AM] - Registering Microsoft.Ssdqs.DomainRules T-SQL executable objects.
[4/15/2015 8:43:01 AM] - Registering Microsoft.Ssdqs.AssociationRules T-SQL executable objects.
[4/15/2015 8:43:06 AM] - Registering Microsoft.Ssdqs.Matching T-SQL executable objects.
[4/15/2015 8:43:12 AM] - Creating refresh assemblies stored procedure.
[4/15/2015 8:43:12 AM] Changed database context to 'master'.
[4/15/2015 8:43:12 AM] - Creating refresh assemblies helper linked server.
[4/15/2015 8:43:12 AM] - Creating and registering [dbo].[DQInitDQS_MAIN] (calls internal_core.InitServer) as startup stored procedure.
[4/15/2015 8:43:12 AM]
[4/15/2015 8:43:12 AM] --> Running File: create_service_broker_objects.sql
[4/15/2015 8:43:12 AM] ---[ Registering Service Broker Objects ]---
[4/15/2015 8:43:12 AM] Changed database context to 'DQS_MAIN'.
[4/15/2015 8:43:12 AM] - Creating SB dispatcher stored procedure, messages and contract
[4/15/2015 8:43:13 AM] - Creating parallel execution SB queues and services
[4/15/2015 8:43:13 AM] - Creating calibration SB queues and services
[4/15/2015 8:43:13 AM] - Creating parallel calibration SB queues and services
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM] Successfully registered all assemblies.
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM]
[4/15/2015 8:43:13 AM] Action 'Register data quality assemblies and stored procedures' finished successfully.
[4/15/2015 8:43:13 AM] Executing action: Set product version property.
[4/15/2015 8:43:13 AM] Action 'Set product version property' finished successfully.
[4/15/2015 8:43:13 AM] Executing action: Create MDS user (if MDS login exists).
[4/15/2015 8:43:13 AM] Action 'Create MDS user (if MDS login exists)' finished successfully.
[4/15/2015 8:43:13 AM] Executing action: Load out of the box data.
[4/15/2015 8:43:22 AM] Started loading knowledgebase 'DQS Data'
[4/15/2015 8:45:04 AM] Starting installation rollback...
[4/15/2015 8:45:04 AM] Installation rollback completed successfully.
[4/15/2015 8:45:04 AM] Fatal error while executing the DQS installer.
Microsoft.Ssdqs.Proxy.ImportExport.ImportExportException: Error occurred in a server proxy call during the import/export process. ---> Microsoft.Ssdqs.Proxy.ImportExport.ImportProcessFailedException: System.NullReferenceException: Object reference not set
to an instance of an object.
at System.Security.Cryptography.CryptoStream..ctor(Stream stream, ICryptoTransform transform, CryptoStreamMode mode)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportReader..ctor(Stream stream)
at Microsoft.Ssdqs.ImportExportManagement.ImportExport.ImportExportManager.Import(Stream input)
at Microsoft.Ssdqs.ImportExportManagement.Calibrator.ImportKnowledgebaseCalibrator.Calibrate(IMasterContext masterContext, CalibrationMode calibrationMode, ConfigurationDomParameter calibratorConfiguration)
at Microsoft.Ssdqs.Core.Service.Calibration.Impl.ExecuteCalibratorFlow.Process(IMasterContext context)
--- End of inner exception stack trace ---
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.WaitUntillProcessCompletes(Int64 processId, Int64 knowledgebaseId, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.Proxy.ImportExport.ImportAsProcessManager.KnowledgebaseImport(String kbName, String kbDescription, String fileName, ImportExportCancellationToken cancelToken)
at Microsoft.Ssdqs.DqsInstaller.Logic.Actions.LoadOutOfTheBoxDataAction.Execute()
at Microsoft.Ssdqs.DqsInstaller.Logic.ActionExecuter.ExecuteAllActions()
at Microsoft.Ssdqs.DqsInstaller.Logic.Installer.Main(String[] args)
Microsoft (R) DQS Installer Command Line Tool
Copyright (c) 2014 Microsoft. All rights reserved.Thank you for the quick response.
Unfortunately running cmd as admin had no effect on the result. Same exact error.
After the rollback indicated in the log above, only the DQS_STAGING_DATA database remains in the sql server instance. -
Error, while pushing the data from Oracle to MSSQL.
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view. -
Error : While applying the Patch 4440000
Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein -
Dear all,
I am getting application error while enabling the feature. if any body can point out the issue - that will be helpful.
content type
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns"/>
<!-- Parent ContentType: Item (0x01) -->
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9"
Name="TrainingCourses"
Group="Training Content Types"
Description="Defines a Course"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE"/>
</FieldRefs>
</ContentType>
</Elements>
List definition
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<!-- Do not change the value of the Name attribute below. If it does not match the folder name of the List Definition project item, an error will occur when the project is run. -->
<ListTemplate
Name="TrainingCourses"
Type="10100"
BaseType="0"
OnQuickLaunch="TRUE"
SecurityBits="11"
Sequence="410"
DisplayName="TrainingCourses"
Description="Training Courses List Definition"
Image="/_layouts/images/itgen.png"/>
</Elements>
List instance
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="TrainingCourses"
OnQuickLaunch="TRUE"
TemplateType="10100"
Url="Lists/TrainingCourses"
Description="Training Course List Instance">
</ListInstance>
</Elements>
schema
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="TrainingCourses" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/TrainingCourses-LD_TrainingCourses" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100d57ecc53fde34177b096abd0ec90a8f9" Name="TrainingCourses" Group="Training Content Types" Description="Defines a Course" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{4C1B0A21-FCE0-4CFE-8742-A250672AFE4F}" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{4c1b0a21-fce0-4cfe-8742-a250672afe4f}" Type="Note" Name="CourseDesc" DisplayName="Course Description" Required="TRUE" Group="Training Site Columns" />
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseDesc">
</FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
I am applying the feature to SPWeb level.
cheers
Sathyaredeployed a new solution; since I was getting this error. I would have done typo errors etc.
https://naveengopisetty.wordpress.com/2011/09/10/error-occurred-in-deployment-step-activate-features-invalid-file-name-the-file-name-you-specified-could-not-be-used-it-may-be-the-name-of-an-existing-file-or-directory-or-you-may-not-have-pe/
Cheers
Sathya -
Error while invoking the WSDL service of EBS from BPEL process
Hi Team,
when we are calling webservice client to call WSDL service which is published in Oracle EBS integrated SOA Gateway from BPEL process.
After invoking, we are getting the below error
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</summary></part><part name="detail"><detail>oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : FND_SOA_SERVICE_EXECUTION_ERR:oracle.apps.fnd.soa.util.SOAException: ServiceExecutionError: Error while executing the service Exception returned from JCA Service Runtime. Exception returned from JCA Service Runtime. null :Please see service monitor logs for full error trace</detail></part><part name="code"><code>{http://schemas.xmlsoap.org/soap/envelope/}Server</code></part></remoteFault></bpelFault>
API Name : OE_ORDER_PUB.PROCESS_ORDER
could you please let me know the exact problem and provide the solution.
Thanks
Phani Ch.Hi Phani,
Are you able to reproduce issue as below:
1. Login to Application as sysadmin.
2. Navigate to Intergrated SOA Gateway > Integration Repository.
3. Click on search on right hand side of the page.
4. In the Internal Name type "FND_USER_PKG" and click Go.
5. Click on the User link.
6. Under the "Web Service - SOA Provider", click in the "View WSDL". Copy the complete URL "http://test:8003/webservices/SOAProvider/plsql/fnd_user_pkg/?wsdl"
7. Open the soapUI.
8. Click File > new soapUI Project.
9. Test the web service.
If yes,
I think you might be need to execute a patch:
solution:
To implement the solution, please execute the following steps:
1. Download and review the readme and pre-requisites for iAS Patch 18855074.
Note: Above Merge Label Request (MLR) is build for EBS 12.1.3 having OC4J 10.1.3.5.
2. Enable the profile option "EBS Adapter for BPEL, Function Security Enabled".
a. Login as SYSADMIN user and Navigate to System >Profile and Search for "EBS Adapter for BPEL, Function Security Enabled" (Internal name :EBS_ADAPTER_FUNCTION_SEC_ENABLED)
b. Set the Value to 'Y' at SITE level . This means function security feature is enabled and all API calls for PL/SQL APIs, Oracle e-Commerce Gateway, and concurrent programs will be checked for user security before they are invoked.
3. Retest the issue by Generating and Deploying the required package.
4. Migrate the solution as appropriate to other environments.
Thanks
Ranjan -
Error while executing the rule session
Hi, I am using Oracle Business Rules Engine 10.1.3.3.0.I am developing rules using XML Facts.I am using a complex type array schema and binding it to define XML facts.Earlier the depth of the schema is 1 and it worked fine,now our schema's depth is 2 and while binding this schema is also working fine.The sample structure of the present schema I am binding is
<xsd:schema>
<xsd:element name = 'ruleRepository' type = 'RuleRepositoryType'/>
<xsd:complexType name='RuleRepositoryType'>
<xsd:sequence>
<xsd:element ='ruleFacts' type='RuleFactsType' minOccurs='0' maxOccurs='unbounded'/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name='RuleFactsType'>
<xsd:sequence>
<xsd:element name='fact1' type='xsd:string'/>
<xsd:element name='fact2' type='xsd:string'/>
<xsd:element name='fact3' type='xsd:string'/>
<xsd:element name='fact4' type='Fact4' minOccurs='0' maxOccurs='unbounded'/>
<xsd:sequence/>
</xsd:complexType>
<xsd:complexType name='Fact4'>
<xsd:sequence>
<xsd:element name='element1' type='xsd:string'/>
<xsd:element name='element2' type='xsd:string'/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Earlier I have binded the similar schema as above but without 'fact4'.It went well and the rules were executing fine.
However when I am trying to bind a similar schema like the above one, its binding fine but when executing from the BPEL Process,its giving errors like,
"Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12",
Please note that I am using fact1 and fact2 only for defining the rules , I am niether using fact3 which is a simple type nor fact4 which is a complex type.
I have asserted Package.RuleRepositoryType in the definitions of the rule author.I have tried with different combinations of assertions but no one worked.
The above error(
"Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12") is coming for the first run of the decision service only,in the next runs its giving another error,which is like
<2008-04-10 07:52:30,772> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-36333
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Error while executing the rule session.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> The rule session {0} failed to execute.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:251)
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
<2008-04-10 07:52:30,801> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> Caused by: java.lang.NullPointerException
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> ... 26 more
<2008-04-10 07:52:30,803> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
08/04/10 07:52:30 pFaultMessage is org.collaxa.thirdparty.apache.wsif.base.WSIFDefaultMessage@6e0e5f name:operationErroredFault
08/04/10 07:52:30 QName string is operationErroredFault
where 'BookOrderDecision' is the name of the decision service I am using in BPEL.
I dont understand why I am getting two errors for the same BPEL Process.
Kindly help me in this problem.I am stuck with this for about a week but could not get to the solution.
Thanks in advance.
Regards,
Venkat.Hi Venkat,
Whenever you do schema changes, you need to go through the cycle of
re-importing the XML schema in the rule repository, re-create the decision
service partnerlink, re-deploy the decision service.
I suspect you have maybe imported the entire XML fact type model (with fact3 and
fact4) instead of just fact1 and fact2 (might want to check in rule author).
So even if you don't use fact3 and fact4 in decision service, they are part of the rules
datamodel.
Regards,
Ralf -
Error while creating the HTTP client with destination GB_DPSRetrieve
Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
KishoreHi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar -
Error while creating the structure
hello friends,
i have two doubts
1)
i am getting the error while creating the structure in se11.
well i am creating the structure in the following way
in component i am giving the values as bom and in component type i am giving the value as meins.
i am getting the status warning message as the below
'field name does not agree with the proposed name base_bom for bapi table'
2)
and more over can we create the structure as the follwing in se11.
component = f1 and
component type = tablename-fieldname
when i am doing in the second way i am getting the error as the following table is not active though the table is activehi guru,
just component name as --- your field name.
where as component type as give just data element k.
no need to give tablenme-fieldname k.
component component type .
f1 matnr----
data element
thanks anji.
Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM
Maybe you are looking for
-
Exit for role determination via exit for scheduling agreement and contract?
Hi.. I have a requirement to fetch the agents in run-time for PO,PR,SCHEDULE AGREEMENT, CONTRACT.. For PO i am using EXIT : - M06E0005 For PR release i am using EXIT :- M06B0001 By using above 2 exits i am getting the agents at run-time... Same way i
-
Peformance on complete refresh of a Materialized View
We are currently doing a complete refresh of a materialized view (35 mil rows) on a monthly basis. My question is would it be faster to disable all the indexes prior to refresh? if so, should we enable the indexes or simply rebuild and which would be
-
HT1689 how do i swap my sim from an i phone to a new i phone but keep all my numbers
Can anyone tell me how to keep all my numbers etc from old i phone to new, the old phone has not been updated as in the past it has lost everything so i havent dared do it again !
-
What is the Universal Product Code and International Article Number of HP power bank F4C80AA????
what is the Universal Product Code and International Article Number of HP power bank F4C80AA????...how to check whether this product is authentic!
-
Prevent remote database access
we cannot change easily our passwords and we must prevent remote access to SYS and SYSTEM accounts. Is there a way to prevent remote database access on SYSTEM account without changing password ?