Error while calling a super class public method in the subclass constructor
Hi ,
I have code like this:
CLASS gacl_applog DEFINITION ABSTRACT.
PUBLIC SECTION.
METHODS:
create_new_a
IMPORTING pf_obj TYPE balobj_d
pf_subobj TYPE balsubobj
pf_extnumber TYPE string
EXPORTING pfx_log_hndl TYPE balloghndl
EXCEPTIONS error
ENDCLASS.
CLASS gacl_applog IMPLEMENTATION.
METHOD create_new_a.
DATA: ls_log TYPE bal_s_log.
Header aufsetzen
MOVE pf_extnumber TO ls_log-extnumber.
ls_log-object = pf_obj.
ls_log-subobject = pf_subobj.
ls_log-aluser = sy-uname.
ls_log-alprog = sy-repid.
ls_log-aldate = sy-datum.
ls_log-altime = sy-uzeit.
ls_log-aldate_del = ls_log-aldate + 1.
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_log
IMPORTING
e_log_handle = pfx_log_hndl
EXCEPTIONS
OTHERS = 1.
IF ( sy-subrc NE 0 ).
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error.
ENDIF.
ENDMETHOD.
CLASS gcl_applog_temp DEFINITION INHERITING FROM gacl_applog.
PUBLIC SECTION.
DATA: log_hndl TYPE balloghndl READ-ONLY
, t_log_hndl TYPE bal_t_logh READ-ONLY
METHODS: constructor
IMPORTING pf_obj TYPE balobj_d
pf_subobj TYPE balsubobj
pf_extnumber TYPE string
EXCEPTIONS error
, msg_add REDEFINITION
, display REDEFINITION
ENDCLASS.
CLASS gcl_applog_temp IMPLEMENTATION.
METHOD constructor.
CALL METHOD create_new_a
EXPORTING pf_obj = pf_obj
pf_subobj = pf_subobj
pf_extnumber = pf_extnumber
IMPORTING pfx_log_hndl = log_hndl.
IF ( sy-subrc NE 0 ).
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error.
ENDIF.
ENDMETHOD.
A public method of Super class has been called from the constructor of the sub class. we are getting the syntax error :
' In the constructor method, you can only access instance attributes, instance methods, or "ME" after calling the constructor of the superclass
'
Can you please suggest how to change the code with out affecting the functioanlity.
Thank you ,
Lakshmi.
Hi,
Call that method by instance of Subclass. OR
SUPER-->method.
Read very useful document
Constructors
Constructors are special methods that cannot be called using CALL METHOD. Instead, they are called automatically by the system to set the starting state of a new object or class. There are two types of constructors - instance constructors and static constructors. Constructors are methods with a predefined name. To use them, you must declare them explicitly in the class.
The instance constructor of a class is the predefined instance method CONSTRUCTOR. You declare it in the public section as follows:
METHODS CONSTRUCTOR
IMPORTING.. [VALUE(]<ii>[)] TYPE type [OPTIONAL]..
EXCEPTIONS.. <ei>.
and implement it in the implementation section like any other method. The system calls the instance constructor once for each instance of the class, directly after the object has been created in the CREATE OBJECT statement. You can pass the input parameters of the instance constructor and handle its exceptions using the EXPORTING and EXCEPTIONS additions in the CREATE OBJECT statement.
The static constructor of a class is the predefined static method CLASS_CONSTRUCTOR. You declare it in the public section as follows:
CLASS-METHODS CLASS_CONSTRUCTOR.
and implement it in the implementation section like any other method. The static constructor has no parameters. The system calls the static constructor once for each class, before the class is accessed for the first time. The static constructor cannot therefore access the components of its own class.
Pls. reward if useful....
Similar Messages
-
Error when calling a Webservice's public method in Forms10g
Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
CarlosI understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM -
Error while calling badi using class cl_exithandler with getInstance
hi experts...we are using SAP ECC 6.0 version
I have created BADI Def and Implementation using se18 and se19 with some interface methods..
Problem:
I'm writing a report to call that using class CL_EXITHANDLER but it shows an Exception..
" Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised."
Report example:
DATA: CL_EXIT TYPE REF TO CL_EXITHANDLER,
IF_USER_INSTANCE TYPE REF TO ZIF_EX_USER_MAILID1.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
EXIT_NAME = 'ZBADI_USERMAIL_DEF'
* NULL_INSTANCE_ACCEPTED = SEEX_FALSE
* IMPORTING
* ACT_IMP_EXISTING =
CHANGING
instance = IF_USER_INSTANCE
* EXCEPTIONS
* NO_REFERENCE = 1
* NO_INTERFACE_REFERENCE = 2
* NO_EXIT_INTERFACE = 3
* CLASS_NOT_IMPLEMENT_INTERFACE = 4
* SINGLE_EXIT_MULTIPLY_ACTIVE = 5
* CAST_ERROR = 6
* EXIT_NOT_EXISTING = 7
* DATA_INCONS_IN_EXIT_MANAGEM = 8
* others = 9
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
so i found that all EXITs are in the Table " SXS_ATTR"
but what i have created BADI has not exist in that Table so that it gets an Exception(while i'm debugging found this)
so kindly tel me whats problem my BADI "ZBADI_USERMAIL_DEF" not maintained that Database table
but in Implentation class its working fine..yes i have created badi in Enhancement spot so regarding what u told i'm using GET BADI and CALL BADI
DATA:W_HANDLE TYPE REF TO ZBADI_USERMAIL_DEF.
GET BADI W_HANDLE.
CALL BADI w_handle->get_user_mailid
EXPORTING
uname = UNAME
changing
mailid = W_EMAIL
WRITE: / 'UNAME:',UNAME.
WRITE: / 'EMAIL ID',W_EMAIL.
CALL BADI w_handle->get_user_address_data
EXPORTING
uname = UNAME
changing
addrdata = W_ADDRDATA
IF W_ADDRDATA IS NOT INITIAL.
WRITE: / W_ADDRDATA-BNAME,W_ADDRDATA-NAME1,W_ADDRDATA-NAME2,W_ADDRDATA-TELPR,W_ADDRDATA-TELNR,W_ADDRDATA-TEL01.
ENDIF.
but here BADI are not called
Interface implementation class methods not executed so kindly tel me whats problem here.
Thanks in Advance
sivakumar -
Access denied Error while calling Web Service form Infopath Form 2010.
Hi Dear All,
I have been facing an error while calling an GetUserProfileByName() web service method from InfoPath 2010 from.
i have FBA(Forms Base Authentication )configured . After Infopath form published to site collection when i select an user from people picker control i want to get Email Id of Selected user for that i am calling getUserProfileByName() Web Method, but
i am getting Access denied error code 500.
Any Help would be more than welcome.
Thanks.Hi,
Greetings. Please check
Check the IE settings. Click Internet Options> Security>Custom level. Make sure that the ‘Access data source across domains’ is enabled. Make sure that you have permission to the web service and to the content which the web service tries to modify.
For more information, please refer to this site:
"Access is denied." error in Infopath 2007 form + ASMX: http://us.generation-nt.com/answer/access-denied-error-infopath-2007-form-plus-asmx-help-65808252.html
Please remember to click 'Mark as Answer' on the answer if it helps you -
Error while calling a method on Bean (EJB 3.0)
I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan -
Operation not found error while calling AM methods from managed bean
Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
SatyaHi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan -
Calling the super class method from the subclass
Hi all,
I have a question about inheritence and redefinition of methods. Is it possible to call the superclass implementation of a method which is redefined in the subclass in another method of the subclass?There are possbilities like creation of an explicit super class instance or delegating the super class method implementation to another method which is also protected etc. What i mean is, is there a direct way of calling it?We have ,me, as the reference for the instance we have(which is the subclass instance in this case), is there also a way of pointing the superclass implementation(with super we can reference in the subclass redefinition, my question is if we have such a parameter in other methods of the subclass too)
Thanks in advance
SukruHi,
The super reference can only be used in redefined methods to call superclass implementation . So probably what you can do is use upcasting and access the required superclass implementation. I can think of only this way...;-)
Ex data lr_super type ref to cl_superclass
lr_super = lr_subclass.
lr_super->method().
~Piyush Patil -
Error while calling the Mapping function module for BW Extraction
Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
<b>Short text</b>
Type conflict during structure parameter transfer at CALL FUNCTION.
<b>What happened?</b>
Error in the ABAP Application Program
The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
<b>Error analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
LeonDear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
typed in such a way
that only actual parameters are allowed, which are compatible in Unicode
with respect to the fragment view. However, the specified actual
parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 876
Module type (FORM)
Module Name PDF
Trigger Location of Exception
Program ZDLROUTSTANDING_COPY
Include ZDLROUTSTANDING_COPY
Row 894
Module type (FORM)
Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks -
Error while calling WebService inside ISchedulerTask.
Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
<property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
<service name="RFServiceWrapper">
<service-config>
<property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
<property name="startup" value="true"/>
</service-config>
</service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
VinodFollowing is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file. -
Error while calling RFC adapter(FILE-XI-RFC scenario)
Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere -
Error while calling RFC when using BSP Web Interface
Hi,
we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
R_AREA
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
R_STS_PT
R_STS_SUP
R_WEBITF
S_RS_ADMWB
S_RS_AUTH
S_RS_COMP
S_RS_COMP1
S_RS_DAS
S_RS_ICUBE
but we still get the error message: "Error while calling RFC".
When using a user with SAP_ALL, it works.
What can we do?
Thx for your time.
JoergActually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded. -
Finding an error while calling an RFC
Hi,
My requirement is as follows.
The internal table(ITAB) which i am using has a field X of length 20 and the Internal table(RFCITAB) field Y found the RFC is of length 10. Here i am creating another 3rd internal table(ITAB1) with field Z of length 10 and i am moving the content of field X from ITAB to ITAB1 and i am passing Z value of ITAB1 to the RFC.
While executing it i am getting the error 'Interface data error'.
please let me know why this error is getting populated.
Regards,
SumiHi,
I have a field lenght of 20 digits in BKPF-AWKEY and it has value of only 10 digits.
I am moving this 10 digits to a new field in a new internal table and i am passing this value to the RFC.
I am getting error while calling the RFC.
Regards,
Yamini.A -
Error while calling up RFC Message No. UPC202
Hi Experts,
Calling Thru Trans code : BPS0 in ECC6.
Getting This Error :
Error while calling up RFC message No. UPC202.
After i check in BW with Trans code : ST22
Following this error message:
Category Internal Kernal Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC.
More details Please find attached file.
Thanks & Regards,
Mohammed Kaleem.Hi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS -
Hi GuRuS,
I am working on BI 7.0. When I open the BPS workbench using Transaction bps0 and select the planning area 4TPM9000, and click on either "Variables" tab or "Master Data" tab or when I click on "Adhoc Package", I get this error " You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated: Error while calling up RFC. "
FYI I have done RFC connections between my CRM 2007 system and BI 7.0 system using Tr.SM59 and checked the connections from both the ends and it is working fine. So, pls show me the way out.
Thanks in advance,
RaghuHi...
The roles SAP_ALL and SAP_NEW are assigned for the RFCUser.
Regards,
Raghu -
Error while calling COM routines via application prog(return code 1028533-)
Hello Expert,
In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
'Error while calling COM routines via application program (return code 1028533-)' is encountered.
In my selection id, i have only two locations....there is no material selection.
When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
Any advise to fix this issue would be much appreciated.
Thanks.
TomHi Tom,
Please see if below exiting threads help you.
COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
Error for COM Routine application program (return code 40028)
Thukral
Maybe you are looking for
-
Div not at same level as logo image
I imagine I am missing something basic on this the end of my first leg of my css journey. I have added a new div into my page call "whatwedo" which is in the header div and meant to be at the same level as the logo on the righthand side (where it is
-
How do setup the URL alias without the port number 7001?
Hi all, I am using Weblogic 8.1 and have the following url http://solutions.company.com:7001/application. I would like to simplify this URL by removing the port number to http://solutions.company.com/application. (ie., configuring the system such tha
-
Hey, Just a comment on features that stop working. After 'some' time I find that the pinch gesture that zooms pdfs inside a safari window just stop working. The only way to fix it I believe is a restart of safari. That is all. thx
-
It says: "Could not save preferences because the file is locked or you do not have the necessary access privileges. Use the Get Info Command in Finder to unlock the file or change permissions on the file or enclosing folders." This comes up every
-
Ac3 audio strange dipping in and out
Hello: Audio sounds/looks great in FCP 4.5, exoprt it into aif file, drop aif into Apack using 2 channel stereo, -31 dbfs, 256 kbps, compressoin preset = NONE...when aif plyed back, sounds great, when ac3 played back in DVD SP 2simulator AND on burne