Error while calling application?

Hi all,
I m getting a error while i m testing my application...
Error:WebDynpro Exception: ICF service node for application /sap/public/myssocntl does not exist
Note
The following error text was processed in the system CGQ : WebDynpro Exception: ICF service node for application /sap/public/myssocntl does not exist
The error occurred on the application server cgslsvr1_CGQ_30 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Plz help to resolve,
Thanks
Ravi

There are certain other services, beside just the ones for your application, that must be present and active. They are documented in this help link:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
Normally you get an error message if the standard nodes are not active. From this message, it would appear that one of the standard nodes is actually missing - not just deactivated. This is a serious problem and likely would only present if some intentionally deleted an SAP delivered Service Node.

Similar Messages

Error while calling COM routines via application prog(return code 1028533-)

Hello Expert,
In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
'Error while calling COM routines via application program (return code 1028533-)' is encountered.
In my selection id, i have only two locations....there is no material selection.
When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
Any advise to fix this issue would be much appreciated.
Thanks.
Tom

Hi Tom,
Please see if below exiting threads help you.
COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
Error for COM Routine application program (return code 40028)
Thukral

Error while calling COM routines via application program (return code 40028

Hi ,
When i am doing these steps i am getting the following error.
1.from SAP menu...Demand Planning>Planning>Interactive Demand planning
 2.after the transaction gets loaded...click on the 2nd button that is selection window from the left ALV menu..on the top.
 3.type the below
show - Material
APO Planning Version - K01
Material - 12345
4.Material 12345 will be loaded
5.Double click and i am getting ''error Error while calling COM routines via application program (return code 40028)''
Note : Observed that this is not happening everytime, but happening alternatively.
Can any one say what is the problem for Error.
Thanks
Gerard

Hello Gerard, Hello Krishna,
-> The liveCache application failed with COM error::
 40028 Illegal timestamp in rough timegrid
More details about COM error 40028 you will see in TA /n/sapapo/om10
 -> Return code: 40028 -> execute ::
Invalid time stamp in the time buckets profile relation
( om_ts_tgrelinvalidstamp )
 < click on '?' mark >
-> Open an OSS message in accordance with SAP note 167280 if further help
 needed to solve the issue on your system.
Thank you and best regards, Natalia Khlopina

Error while deploying application on portal domain

Hi All,
I am getting following error while deploying application on portal domain :( :( Not sure what I am missing.......
Anyone has any idea on this???
<Oct 6, 2010 7:49:03 AM EDT> <Warning> <com.bea.wlw.netui.pageflow.internal.WebLogicURLTemplateFactory> <BEA-000000> <In webapp <Workshop Application>, the url template <http://{url:domain}:{url:port}/{url:path}?{url:queryString}{url:currentPage}> uses the {url:port} token. The system may not pick up the correct ports if you are using a proxy server. Consider hardcoding the ports in a production environment.>
<Oct 6, 2010 7:49:05 AM EDT> <Error> <com.bea.p13n.util.jdbc.internal.JdbcSequencer> <BEA-000000> <Cannot allocate sequence block:
java.sql.SQLException: Cannot call commit when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:349)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.allocateSequenceBlockNewTx(JdbcSequencer.java:626)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.getNext(JdbcSequencer.java:456)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionDelegate.createMarkupDefinition(MarkupDefinitionDelegate.java:785)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManagerImpl.createMarkupDefinition(MarkupDefinitionManagerImpl.java:161)
Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 7:49:05 AM EDT> <Error> <netuix> <BEA-423147> <Exception [javax.transaction.TransactionRolledbackException: EJB Exception: : javax.ejb.EJBException: SQL Error while trying to createMarkupDefinition: SQL [insert into PF_MARKUP_DEFINITION ( MARKUP_DEFINITION_ID, MARKUP_NAME, MARKUP_TYPE, WEBAPP_NAME, MARKUP_FILE) values (?,?,?,?,?)] database error code [0] SQL state [null]. Possible markup duplication of [
MarkupDefinition:
webAppName = plassPortalWeb
type = Menu
name = multiLevelMenu
file = /framework/markup/menu/multilevel.menu
beginXml = <netuix:multiLevelMenu $(markupType) $(markupName)>
endXml = </netuix:multiLevelMenu>
MarkupDefinitionId = null].; nested exception is: java.sql.SQLException: Cannot call commit when using distributed transactions
java.sql.SQLException: Cannot call commit when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:349)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.allocateSequenceBlockNewTx(JdbcSequencer.java:626)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.getNext(JdbcSequencer.java:456)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionDelegate.createMarkupDefinition(MarkupDefinitionDelegate.java:785)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManagerImpl.createMarkupDefinition(MarkupDefinitionManagerImpl.java:161)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManager_twpn9c_EOImpl.createMarkupDefinition(MarkupDefinitionManager_twpn9c_EOImpl.java:138)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.onNewFile(MenuFilePersistenceManager.java:160)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.createUpdateMenuDefinitions(MenuFilePersistenceManager.java:267)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.startupSync(MenuFilePersistenceManager.java:529)
at com.bea.netuix.servlets.repository.AbstractFilePersistenceManager$StartupSync.run(AbstractFilePersistenceManager.java:155)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.netuix.servlets.repository.AbstractFilePersistenceManager.startup(AbstractFilePersistenceManager.java:97)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.onNewFiles(MenuFilePersistenceManager.java:228)
at com.bea.netuix.poller.FrameworkPoller.newFiles(FrameworkPoller.java:256)
at com.bea.netuix.poller.NetuixFilePoller.start(NetuixFilePoller.java:172)
at com.bea.netuix.servlets.manager.PortalServlet.reinitInternal(PortalServlet.java:390)
at com.bea.netuix.servlets.manager.PortalServlet.initInternal(PortalServlet.java:261)
at com.bea.netuix.servlets.manager.PortalServlet.access$100(PortalServlet.java:125)

Hello Everybody,
I solved this error by myself as follows:
So, what I did was; I started the RemoteGui.bat (C:\usr\sap\J2E\JC00\SDM\program) and from the Undeployment tab, I selected mainapp01 and com.sap.engine.docs.examples.
The reason I undeployed the above applications was because when I was trying to deploy the mainapp01 application, it gave an error saying that : Cannot deploy application pcbp.com/mainapp01.. Reason: Application alias [/] for application [pcbp.com/mainapp01] already exists in the HTTP Provider Service. The application that holds this alias is [sap.com/com.sap.engine.docs.examples .
And, then I restarted the J2EE engine and from the SAP Netweaver Developer Studio, I again deployed the mainapp01 application on the local J2EE engine and it was deployed successfully.
Oct 10, 2006 9:45:30 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Finished Deployment
Settings
SDM host : RPIKOER
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp9270pcbp.com~mainapp01.ear
Result
=> successfully deployed : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp9270pcbp.com~mainapp01.ear
Thank You
With Regards,
Krunal Rana.

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Error while calling WebService inside ISchedulerTask.

Hi,
Env: NW 2004s
I have a requirement of calling webservice frequently. I developed a portal project with scheduler, where the application gives a runtime error while calling/reading the property file (which is generated during the webservice proxy generation, without it webservice call is impossible).
I have varified the ear file which contains all the required class files and config files including property file.
fyi:
portalapp.xml file looks like this.
+
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
 <property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal"/>
</application-config>
<components/>
<services>
 <service name="RFServiceWrapper">
 <service-config>
 <property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
 <property name="startup" value="true"/>
 </service-config>
 </service>
</services>
</application>
+
Any input will be highly appreciated.
Thanks,
Vinod

Following is the error message:
msg1:
at <package>.AFFERAAFWSServiceImpl.<init>(AFFERAAFWSServiceImpl.java:10)
msg2:
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ServiceBase.loadProtocolsFromPropertyFile(ServiceBase.java:238)
Reporting from Logs and Traces.
Error Located @ following code inside AFFERAAFWSServiceImpl.java, which is a proxy class generated using apache axis
input = this.getClass().getClassLoader().getResourceAsStream("<package>/protocols.txt");
loadProtocolsFromPropertyFile(input);
protocols.txt is another config file generated along with AFFERAAFWSServiceImpl.java, which is been used @ run time.
FYI: All these files are present on ear file.

Error while calling RFC when using BSP Web Interface

Hi,
we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
R_AREA
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
R_STS_PT
R_STS_SUP
R_WEBITF
S_RS_ADMWB
S_RS_AUTH
S_RS_COMP
S_RS_COMP1
S_RS_DAS
S_RS_ICUBE
but we still get the error message: "Error while calling RFC".
When using a user with SAP_ALL, it works.
What can we do?
Thx for your time.
Joerg

Actually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded.

Error while calling up RFC Message No. UPC202

Hi Experts,
Calling Thru Trans code : BPS0 in ECC6.
Getting This Error :
Error while calling up RFC message No. UPC202.
After i check in BW with Trans code : ST22
Following this error message:
Category Internal Kernal Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC.
More details Please find attached file.
Thanks & Regards,
Mohammed Kaleem.

Hi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS

Error while calling the EAI Viewer

Dear all,
I am working on Document Management System ECC 6.00
I am able to upload a PDF document in to the system, but when i save it and try to call the document back it is giving me the folllowing error."Error while calling the EAI Viewer" But when i try to open the same in the next PC it is opening. the work station application which i have defined is EAIWeb.webviewer2D.1 %SAP-CONTROL% for the application .pdf.
Kindly suggest what will be the problem as it is not opening in my PC but opening in an different PC with the same user name.
Kindly suggest.

Hi Kishuz ,
ECL Viewer comes with SAP
It is Engineering client viewer, which works for files like *.jt(jupiter technology), *.pdf(acrobat), *.dwg(autocad), *.step, *.iges
with ECL viewer you can view files like dwg without having Autocad Installed on your machine.
Alos it gives redlining feature...
thus layers help in indicating the modifications needed or commenting on the drawings...
Now the procedure for installation,
1. Install the latest SUN JAVA version. The path could be c:\program files\java\
2. While installing SAP GUI, ensure that the ECL component is not selected from R/3 Add On.
4. Install ECL Viewer 5.1.2 on local machine.
5. Ensure the path is as follows :(C:\Program Files\Common Files\SAP Shared\System or C:\Program Files\Common Files\SAP Shared\System\Java )
6. Ensure that the following files are in the c:\program files\java\1.5.0_08\lib\ext
folder:
- VisWebS.jar,
- VisWeb.jar,
- eaisupport.jar,
- eaisupportS.jar
- version.ini
- vctk.ini
In case, please copy the mentioned files from <ECL Install DIR>\java.
(C:\Program Files\Common Files\SAP Shared\System or
C:\Program Files\Common Files\SAP Shared\System\Java )
Reward points if useful...
regards
Niranjan

Error While calling getListItem Webservice : Server was unable to process request. --- Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

Hi All,
we are calling sharepoint webservice from our web application but we are getting below error while calling webservice.
Server was unable to process request. ---> Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Our code is as below.
We used below 2 options but we got same error for both scenario,
1)
            ListService.Lists objLists = new ListService.Lists();
            NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
            objLists.Credentials = objNetworkCredential;
            System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
2)         ListService.Lists objLists = new ListService.Lists();
            objLists.Proxy = new WebProxy("proxyaddress",true);
            NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
            objLists.Credentials = objNetworkCredential;
            System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
Please help me what is the problem while calling this service.
Thanks in advance.
Regards,
Kaivan Shah

Hi ,
Here is a similar case ,you can have a look at this .
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) -Accessing the sharepoint site:
http://social.msdn.microsoft.com/Forums/en-NZ/sharepointworkflow/thread/5eab2116-7d7c-4bf3-bfa1-48bd8992dded
Thanks,
Entan Ming

Error while calling BAPI_PARTNEREMPLOYEE_CREATE

Hi All,
I am trying to call BAPI_PARTNEREMPLOYEE_CREATE BAPI in my java application using JCO But internally this BAPI calls VAP1 screen so currently i am getting error while calling this BAPI.
please suggest to overcome this error
Thanks in advance,
Arati

Hi,
The issue has to be resolved by ABAPers. The process they have to follow is
a) Record screens for transaction VAP1 - BDC(If I am not wrong)
b) Create Custom BAPI(fucntion modle)- Embed the code of screen recording and include functionality of BAPI_PARTNEREMPLOYEE_CREATE in this
The above option I used. There can be possibility of alternatives to this.
regards,
ganga

System error while calling webservice adapter

Hello Experts
I am configuring a synchronous proxy to webservice scenario.I have created a webservice from a custom function module. while executing the interface i am getting the following error in the sxmb_moni.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

ya I have checked the wsdl and even called the wsdl using Altova XmlSpy and getting back the response.Could anyone please throw light on this.
thanks
sabyasachi

Error while calling a method on Bean (EJB 3.0)

I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan

Error while web application deployment in NetBeans5.5

Error while web application deployment in NetBeans5.5. I am always getting Tomcat deployment error. using Netbeans 5.5.1 with bundeld tomcat. But in some machines its working fine.
regards
jossy v jose

What is the error message you see?
Are there any stacktraces or other relevant messages in the ide log file? (The ide log file is [userdir]/var/log/messages.log. On userdir: http://blogs.sun.com/karthikr/entry/jse_directories)
You can also check the server log file to see if there are more detailed messages.
You can also try setting ant's verbose level to debug or verbose (Tools | Options | Miscellaneous | Ant | Verbosity Level) and check the output.

Error while loading application

Hi,
I'm not sure this is the right forum, but I try anyway.
I'm trying to use a 3rd party Java application Unico (just use it, I don't develop anything of that) that after working for weeks, suddenly refuses to load at startup, and returns an error like "Error while loading application" (no error code number no other hint about the problem).
The tests that did not work: 1. I installed the Unico again, 2. I created a new login and installed Unico in that login, 3. I started in safe mode (pressing shift at startup) - I always had the same message and loading aborted.
The only workaround I found is to use an external startup disk, that I fortunately had available to face cases like this: when starting the system up from that disk Unico WORKS, not only, but I can even use the same application in my internal disk that does not load otherwise.
My first conclusion is that something wrong happened to my system on the startup disk that prevents loading a Java application. The user Library seems to make no difference.
So my questions to the Java experts are:
- what in the system could suddenly block the loading of a Java application ? where should I look in the system (I can use the terminal and know something about UNIX) to fix this ? could this be caused by a permission problem ? (it looks a lot alike, but repairing permissions in Disk Utility didn't help) if so where are the Java support files stored in the Library and System Library to check and compare between the good and the bad system ?
- is there a better workaround to this problem, other than starting up from a different disk ?
Some additional info:
- the application Unico is freely provided by the Italian tax organization, so there is basically no support to use it...
- Unico requires Java 1.3.1: my system is constantly updated/upgraded and it runs the most recent release that is 1.4.0 (I guess...) and anyway worked very well till a week ago.
- since the last time the application had worked I installed two (non Apple) packages: the TomTom (GPS navigator) setup application, and new Epson printer drivers for my new printer.
- in all cases I repaired permissions and I also verified the disk with the disk utility
- Unico does not uses printers (it creates pdf files instead) and does not use USB, which in turn is used by both the Epson driver and the TomTom app.
So I cannot connect the Unico malfunctioning to this new SW except for the fact that I cannot find any other answer...
Thanks to anybody having any suggestion about
Piero

I made some research: it seems to me that most (if not all) the Java machine is in the /System/Library/Framework/JavaVM.framework folder: but I found no evident difference in the file permissions between the good and the bad system (see my previous posts).
There are other locations where there are java related files: eg in Javaconfig.plist (in /System/Library/Java) that seems to name the locations for all components of the java machine. I checked some files in /usr/bin referenced in the .plist: again no difference.
Something "could" be a clue; just before the crashing point the Unico (java) program causes a message in the Console:
"[JavaAppLauncher Warning] Specifying a specific version for JVMVersion 1.3.1 is deprecated. Use the more general 1.3* instead."
This would be a clue... except that this message appears also when the program loads without problem (in the "good" system where it works). So it is more a warning.
Another clue is the message that appears in the console in the "good" system when the Unico loads correctly; and this seems really an error message (whateve it means):
"Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
Attempted to read past end of 'pxm#'(2062) resource"
The funny thing is that when this message appears, Unico loads with no probem, while in the "bad" system it doesn't even get to this point.
So in my opinion both messages are irrilevant to identify the problem.
Or not ?
And again my main question is: what in the system could suddenly block the loading of a Java application ?
Thanks for any hint
Piero

Error while calling application?

Similar Messages

Maybe you are looking for