ERROR WHILE CFREATING MB1C

HI ,
         I AM USING ECC 6.0.
I AM GETTING THE PROBLEM WHILE CREATING MB1C.
*" PARAMETERS FOR PLANT C NOT MAINTAINED IN INVENTORY MANAGEMENT "*
CAN ANYONE PLS FORWARD ME THE SOULTION.

Dear Nabi,
As already suggested by Other Elite Members:
When you want to post any material movements, You have to maintain Plant Parameters from Inventory side as well in consumption based planning side.
SPRO>Materials Management>Consumption Based Planning-->Plant Parameters,
And,
SPRO>Materials Management>Inventory Magnt and Phy inv. -->Plant Parameters.
Best Regards,
Amit.
Note: Copy, from existing Plant.

Similar Messages

  • Error while doing MB1C

    Hi All,
    I'm working on IDES, I got a error while doing MB1C with movement type 561. Error is "Error accessing functional module : FMFK_FIKRS_READ. Parameter : IP_FIKRS, IP_FMA_OBJNR"
    Regards
    Nagendra

    Hi Lakshmipathi
    How to deactive the functional module ? Just now I had checked Functional Module, IP_FIKRS is Financial Management Area and IP_FMA_OBJNR is Object number. If I deactive does this leads to some other problem ?
    Kindly guide me.
    Regards
    Nagendra

  • Error while posting mb1c

    He seniors,
    I am getting error while posting stock in T. code- MB1C
    Error- G/L account 799999 dose not exists in company code.
    dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
    thanks......

    Dear Sundyeep,
    As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
    CHART OF ACCOUNTS (MOST URGENT)
    Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
    Thanks,
    Davinder
    Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

  • Error while posting MB1C transaction

    Dear All,
    while posting MB1C transaction iam getting following error.
    "Error Accessing Function Module;FMFK_FIKRS_READ
    Parameter: IP_FIKRS_FMA_OBJNR"
    so pls suggest me to resolve it.
    thank u.

    Dear Siraj,
    I have extended the material to warehouse numbers as you suggested.  Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
    then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
    Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
    MESSAGE: L9009
    Thank you,
    SAHER.

  • Error while doing MB1C - 561 MVT

    Friends,
    while i am doing MB1C with movement type 561I am getting the following error.
    Fld selectn for mvmt type 561 / acct 950900 differs for Ext. GA amount in LC (023)
    Message no. M7093
    Diagnosis
    Comparison of the field selection strings from movement type 561 and G/L account 950900 has revealed that there is an incompatible field selection combination at one or more points.
    Field for which the field selection is different: Ext. GA amount in LC
    What might be the reason. and where to check.

    Hi
    Goto TCode OMBW and select 561 and select Materials management and see the status of field Ext. GA amount in LC.
    Goto TCode FS00 and enter GL  950900 and goto page Creat/Int and identify the FSG
    Goto TCode OBC4 and enter you FSV and select above FSG and select Material management and see the status of field Ext. GA amount in LC
    Both status are different and make it same status ofr both
    Cheers
    Srinivas

  • Getting Coding Blocked Error while recording MB1C

    Hi,
    While recording TCode MB1C when I enter the material number and quantity and press Enter I get a message "Coding Blocked". When I click on OK I'm able to proceed further. But, when I'm not recoding I'am able to make entries in the same without this message. Is it okay to record MB1C even if I get this message. I don't know the reason why I get this message.
    Please help.
    Regards,
    Sriram.

    Hi,
    the t-codes MB1B and MB1C need to record with Not a Batch input session..
    try this way..
    go to SHDB > create new record> etner t-code MB1C and check Not a Batch input session and record..
    later in the coding assign the field not bacth input session = 'X" and default screen size..
    prabhudas

  • ERROR WHILE USING MB1C

    Namaste Gurus,
    I am trying to post goods to std comp code 1000 in s loc 0001 by using MB1C the system shows an error ACCOUNT DETERMINATION FOR ENTRY INT GBB_BSA 7920 not possible.
    I have checked and rechecked the accounting, & costing tabs in the material master but still get the same error.
    Please advice
    Thanking you.
    With regards,
    Madhav

    Go to OBYC
    Double click on GBB
    Give chart of Accoutns: CAUS
    Give your vaulation area
    General Modification: BSA
    Valuation Class: 7920
    Enter the GL account
    reward points if helpful
    Thanks and Regards,
    Rahul

  • Error while posting material  in MB1c

    Hi
    how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
    Kindly help.
    Thanx.

    Hi Mukesh
    In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
    However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
    Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
    If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
    This should solve your problem
    Rukshana

  • Error while creating stock using tcode: MB1C

    Error while creating stock using tcode: MB1C
    The Error is: Check table T004F:entry G006 does not exist

    Hi ,
    Please check the FSV (field status variant) for your company code in OBY6 .
    then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
    if not please maintain it.
    Thanks & Regards
    Anshu

  • Error while saving INtial stock upload thru t-code MB1C

    I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
    the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
    I am from SD module. Please help me resolve this issue.
    THank you
    Brian

    Dear Brian
    When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
    Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals  push button,  you will go to the screen maintain number range Intervals ,  Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from  & to number ranges. You can repeat the last years no. range in the current year also.
    Best Regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:26 AM

  • ERROR WHILE UPDATING TABLE 'COBK'

    DEAR ALL!
    I am facing the following error while posting goods issue through VL01N and stock posting through MB1C ( m.type 521 without production order ).
    Table COBK is not updated wile doing those trasactions, this cause the runtime error.how to solve this issue?
    I searched SAP notes but problem not yet solved.Kindly go through the following error and give your suggestions.
    Thanks in advance.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "INSERT_TABLES" "(FORM)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    Sivasubramaniam,
    SD consultant.

    I am pretty sure table COBK is a the Cost Center Accounting table.
    You need to get your Finance consultant to check the periods and years are open in CCA. In fact check that they want to post to CCA.
    Also check the number ranges have been set up correctly for the type of postings.
    Please award points if this is useful.

  • Error while adjusting the Consignment Stocks

    Dear Forum,
    We have come accross an error while adjusting the Consignment Stocks. The error is "Field selection for movement type 701/acctt xxxxxx differs from Customer goods movement (015)". What do we need to check the resove this error and what additional maintenance is required to be done.
    Would appreciate the help for resolving this.
    Regards

    Hi Raj,
    For those transactions that are processed through MB1A, MB1B, and MB1C a check is made on both tables T004F (FI) and T156B (MM).
    These tables define what data is 'mandatory', 'optional', or 'display only' when the transaction is processed.
    There are certain fields (like the one you have met, the "Customer goods movement") that are contained on both tables.                                                                               
    For these kind of fields that are in both tables, the field selection must be the same: Since the data is processed through a single dynpro,  the system must have only one instruction for a data field. This is why the message M7093 is being generated when, for example, optional is specified for MM and required is specified for the General ledger.                                                                               
    Use report RM07CUFA to change the appropriate field setting. Compare the tables above to see which field may be set to required vs optional for the movement type/ account and change it accordingly.                                                                               
    The SAP Note 9281 gives a more detailed explanation of this.          
    I hope this information helps you.
    Esther.

  • Error while calling a select esb service

    javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback:
    I encounter the above error while executing a synchronous bpel process, that invokes an esb db select service to fetch a value from the db.
    the details available for the error are:
    An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0 at java.util.Vector.get(Vector.java:710) at oracle.tip.esb.server.common.wsif.WSIFInvoker.readResponseHeader(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(Unknown Source) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(Unknown Source) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(Unknown Source) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(Unknown Source) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(Unknown Source) at oracle.tip.esb.wsif.WSIFOperation_ESB.executeRequestResponseOperation(Unknown Source) at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:431) at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:353) at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:192) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:733) at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:368) at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:197) at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3266) at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1696) at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75) at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184) at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:269) at com.collaxa.cube.engine.CubeE
    Please suggest
    thanx
    AJ

    Done That,
    Thanx a ton Dave, it worked.
    So I am finally moving on :-)
    Just one question Dave, I happened to work on the Beta release of this version too, the problem was not there. How come we have been able to get it in dev preview.

  • Error while running a Java Program

    Can anyone help me,
    I am getting the following error while running a Java program, Below is the exception thrown, please help.
    java.nio.BufferOverflowException
    at java.nio.Buffer.nextPutIndex(Buffer.java:425)
    at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
    at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
    at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
    at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
    at org.jetel.graph.Edge.writeRecord(Edge.java:288)
    at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
    java.nio.BufferOverflowException
    at java.nio.Buffer.nextPutIndex(Buffer.java:425)
    at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
    at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
    at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
    at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
    at org.jetel.graph.Edge.writeRecord(Edge.java:288)
    at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

    Ok, let's see. Write the following class:
    public class Grunt {
      public static void main(String[] args) {
        System.out.println("Hello Mars");
    }Save it as "C:\Grunt.java", compile by typing:
    javac c:\Grunt.javaRun by typing:
    java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
    Regards

  • Error while generating a role

    Hi SAP Techies,
    I am getting the following error while generating a role,
    "18 field value(s) for object K_CCA were not entered in the profile"
    Can you please provide me a solution to fix this problem.
    Thanks.
    Regards,
    Agustuss

    How many cost centres are you putting in the role?  Do you have cost centre set as an org level?
    From your User Name I assume that you are at the BBC...Do you still use a program to populate the cost centres in the role based on the cost centre group names?  If so it is possible that you are trying to put too many cost centres in the field and the the profile will not generate because of this (we had it back in 2001 when I was working there).
    Do you have the technical error message details?

Maybe you are looking for