Error while changing a script / UCCX 8.5

Hi,
While trying to change scripts last night I got the following error DBMgr:delete:failed: file name java.sql.SQL.Exception: Could not position within a table (informix.scriptsfiletbl)
I have never encounterd this error. This morning it seemed to have work fine. Anyone know what that error means?
Thanks,
AJ

Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
% truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

Similar Messages

Error while executing the script adgetlnxver.sh

Error while executing the script adgetlnxver.sh on apps&db tier during upgrade from 11.5.9 to 11.5.10.2
-bash: [: -lt: unary operator expected
[aptinst@dba5 TINST_dba5]$ sh adapcctl.sh restart
adapcctl.sh version 115.55
/u01/app/tinst/tinstappl/ad/11.5.0/bin/adgetlnxver.sh: line 123: [: -lt: unary operator expected
Apache Web Server Listener :httpd ( pid 8645 ) is running.
Restarting the Apache Web Server Dedicated HTTP Listener..
Apache Web Server Listener (PLSQL) :httpd ( pid 8673 ) is running.
Restarting the Apache Web Server Dedicated PLSQL Listener..
adapcctl.sh: exiting with status 0
In adgetlnxver.sh: line 123 says
if [ ${setflag}x = "x" -a $os = "RH" ]; then
redhatver=`grep -oP "Enterprise Linux [a-z A-Z 0-9]* release [0-9]+" /etc/redhat-release | sed 's/Enterprise Linux [a-z A-Z 0-9]* release //g'`
if [ $redhatver -lt 5 ]; then
LD_ASSUME_KERNEL="2.4.19"
export LD_ASSUME_KERNEL
fi
fi
Thanks,
Vamsi

Hi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim

Error while running OMBPlus Script

Hi,
I am getting below error while running OMBPlus script.
+../../../jdk/bin/java[87]: getconf: not found+
OMB*Plus: Release 9.2.0.4.0
Copyright (c) 2003 Oracle Corporation. All rights reserved.
Exception in thread "main"
I am not even able to run ./OMBPlus.sh.
Can anyone help me on this?
Thanks in advance,
Regards,
Sachin Bansal

Hi Nawneet,
Thanks for the reply..
I tried the same thing on our server. But there also I am getting the same error.
Am I missing anything?
What I am doing is:
1. Created one .tcl file (deploy_map.tcl).
2. Going to path where OMBPlus.sh resides i.e.$OWB_HOME/bin/unix
3.Then I called ./OMBPlus.sh and passed the path of deploy_map.tcl as an argument.
For e.g. if path of deploy_map.tcl is /abc/xyz/deploy_map.tcl
Then I would call OMBPlus like below:
./OMBPlus.sh /abc/xyz/deploy_map.tcl
Even if I would not pass any argument then still it should be connected to OMBPlus. But that's not happening.
Regards,
Sachin Bansal

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

Budget Exceeded error while changing in Account Assignment

Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JK

I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth

Error while changing modules

On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

"error while evaluating Java script for the package"

Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

Okay, this is a new one on me! Anyone ever get this message? I don't know what is going on with my iMac, all I know is that about a month ago my iTunes was working fine, and when I just went to use it, it tells me "you can not use the application iTunes with this version of Mac OS X. So I thought maybe something was wrong with my iTunes and downloaded it again and i got the "error while evaluating Java script for the package" when I tried to reinstall iTunes. Another issue I am having is with updates. I haven't received an update for a long time and when I manually check, it tells me there are none.

Error while changing between modules

Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
Julia

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

Error while Changing Vendor

Dear all
I am getting the below error while changing the vendor master.
"Tax code 1 must be numerical
Message no.AR144 "

go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
Thx
Raju

UCCX error while updating Cisco Script Application

Hi all,
I am using UCCX 9.0.2 in my lab.
I have a working Cisco Script Application mapped to a trigger.
I want to update to the script to a new script in this application.
When I click on the Update button I get this error: "Error while performing the operation. Please look into logs for more information. "
Please let me know what logs would be helpful to check further on this error. I could not see any logs matching the error in the default MIVR logs.
Thanks,
Dilip

Hi Dilip,
Can you check if the Cisco Unified CCX Database is IN SERVICE on both the nodes?
To verify the integrity can you run the following command on both the nodes (non-business impacting)
utils uccx database dbserver integrity
Check the update post that. If it still fails, look out for the Replication Servers under the Cisco Unified CCX Serviceability -- Tools -- Datastore Control Center -- Replication Servers.
Both nodes should show Connected and Active with the Reset replication button available.
then proceed to the Related Links for Datastores and check the Config Datastore. See if it shows both the nodes and if the status is RUNNING.
The Config Datastore works on the Informix 2 phase commit protocol which means that for a transaction to be commited into the DB, both the primary and target node (Informix terminology) needs to participate in the transactions.
This will fail if the one of the nodes is down, DB on one of the nodes is down. If the secondary node goes down, then to make a config update, the Disable CDS/HDS can be carried out which will remove this protocol and the config changes will be successful from the primary.
if the primary is down and the secondary is up and if you try to make a config change, it will fail always as the IDS need the primary to be up for the protocol and there is no workaround to this.
Hope this helps!
Regards,
Arundeep

Error while executing UNIX script from BODS - exit code 127

I am trying to execute a unix script by calling it in BODS job. It is giving an error saying Program terminated with exit code 127. The same script when i am executing in UNIX it is working fine. I am unable to trace the issue.

Hi Sabre,
As per the guidelines provided by the article, i had done below changes..
InputStream is = null;
InputStreamReader iStreamReader = null;
BufferedReader bReader = null;
String line = null;
try{
String fileName ="test.ksh";
String argValue ="satish"; // value passed to the script
String exeParam = "/usr/bin/ksh "+fileName+" "+argValue;
Process proc = Runtime.getRuntime().exec(exeParam);
is = proc.getErrorStream();
iStreamReader = new InputStreamReader(is);
bReader = new BufferedReader(iStreamReader);
System.out.println("<ERROR>");
while((line = bReader.readLine()) != null)
System.out.println("Error is : "+line);
System.out.println("</ERROR>");
int exitValue = proc.waitFor();
sop("Exit Value is : "+exitValue);
catch(Exception e)
e.printStackTrace();
Now , it's showing something like..
<ERROR>
</ERROR>

Error while changing PO in SRM extended classic Version 5.0

Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
Srujank

Hello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima

Error while Changing IO group

HI Gurus
I facing problem while changing IO group using T code KOH2
some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error 'Position cursor correctly' .
Is there is any resion that IO got gray out ?
Thanks
Avadhut

Hi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar

Error while changing the physical IP address of SOA related datasource

Hello Everyone!!!
I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
     at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
     at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
     at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
     at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
Any suggestion would be of great help.
Thks in advance!!!

Hey thks for the reply,
We were able to solve the problem by just restarting our database,
i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
[http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
The Exception that appears in the log file is as follows:
[2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
     at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
     at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
     at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
     at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

Error while changing Service order through BAPI_ALM_ORDER_MAINTAIN.

Hi Frens,
I am facing problem while changing a service order .
I am changing the HEADER ( Planner group & Basic Finish date )   through
BAPI_ALM_ORDER_MAINTAIN.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = 'HEADER'.
lt_methods-METHOD = 'CHANGE'.
lt_methods-OBJECTKEY = l_aufnr.
append Lt_methods.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = ' '.
lt_methods-METHOD = 'SAVE'.
append lt_methods.
lt_header-orderid = l_aufnr.
lt_header-PLANGROUP = 'GE'.    " Hard coding for testing
lt_header-FINISH_DATE = '20081114'.
append lt_header.
lt_headerup-orderid = L_AUFNR.
lt_headerup-PLANGROUP = 'X'.
lt_headerup-FINISH_DATE = 'X'.
append LT_headerup.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
    TABLES
      IT_METHODS   = LT_methods
      IT_HEADER    = LT_header
      IT_HEADER_UP = LT_headerup
      RETURN           = LT_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       wait = 'X'.
I am getting error No : IWO_BAPI2 ( 118 )" *Order 5001887 cannot be saved, since no operation is maintained."*

Hi Balu,
You can refer to the note 966289 which talks about this problem if a service order template is used.
Thanks
Abishek

Error while changing a script / UCCX 8.5

Similar Messages

Maybe you are looking for