Error While Changing Contact Person in MSA
Hi,
When the users are trying to change the data of the already saved BP or CP it is giving out error "Value of Attribute Tile is Not Valid" This is happening only for some of the BP and CP not to all.
We are not maintaing any entries in the "Title" Drop down box and all the cp,bp are saved without the Title.
Does anyone has clue to the problem
Balaji Srinivasan wrote:
Based on the couple of OSS notes I have searched,
You should share the OSS note which you got from market place.
Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
It has the reason and solution.
Similar Messages
-
Error while creating contact person
Hi While creating contact person in customer master data
I am getting the message Partner XXXXXX is not assigned to a partner function?
What might be the possible reason,
Thanks in advance
Regards
JaiHi jaigss,
Please check the below threads,
Getting a "Business partner not found with partner function type requester"://Re: Partner function not found
Approver Can replaced by Requestor..
Thanks,
Swamy H P -
Error Message AM057 while deleting contact person
Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl. Person Seq. No. Table Field Application table key pers.addr. Key Addr. no. Owner
300 0200591046 1 KNVK PRSNR 2000000093060 BP 0200026699 X
300 0200591046 45333695 KNVK PRSNR 3000007093060 BP 0200026699 X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
BalajiDear Balaji
You have asked same question In Different places
Re: Error Message AM057 while deleting contact person in customer master -
When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help
Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class? -
Budget Exceeded error while changing in Account Assignment
Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JKI think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth -
On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.
Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771> -
Error while changing between modules
Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
JuliaHi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771> -
Dear all
I am getting the below error while changing the vendor master.
"Tax code 1 must be numerical
Message no.AR144 "go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
Thx
Raju -
Error Message AM057 while deleting contact person in customer master
Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl. Person Seq. No. Table Field Application table key pers.addr. Key Addr. no. Owner
300 0200591046 1 KNVK PRSNR 2000000093060 BP 0200026699 X
300 0200591046 45333695 KNVK PRSNR 3000007093060 BP 0200026699 X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
BalajiBalaji Srinivasan wrote:
Based on the couple of OSS notes I have searched,
You should share the OSS note which you got from market place.
Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
It has the reason and solution. -
Error while changing the PO BOX value for a Business partner
Hi Friends,
We are getting an error when we try to change the PO Box value for a Business Partner.
We have the dependency like when we give the value for the PO Box we also need to give the postal code value. And also we have a specific format for the Postal code. We gave both the values (a valid postal code) and try to save the details, then error message "The attribute GUID of Organization (a Contact Person is assigned to) of the Business Object contact person is not valid" is displayed. We have no clue why there is a conflict for the contact person details.
Can any one suggest the reason for this?
Thanks & regards,
Swarna SeetaHi Swarna,
You are getting this message not because you have entered wrong Post code .It will come even if you try to change some other field and save it. This is because on saving a business object, the framework tries to validate all the associated objects depending on the relation.In this case the data in the mobile client is either not present or is no longer valid.
Check if the field of the Business object which is being shown as invalid, has some data in the table. Check the combo associated to it and from where the combo is doing the validation. The table from where the combo is doing the validation does not have that data and so the value is invalid.
Also compare the number of entries in smokna1sht table in ides and in CDB.
Regards
Vivek -
Error while changing PO in SRM extended classic Version 5.0
Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
SrujankHello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima -
HI Gurus
I facing problem while changing IO group using T code KOH2
some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error 'Position cursor correctly' .
Is there is any resion that IO got gray out ?
Thanks
AvadhutHi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar -
Error while changing the physical IP address of SOA related datasource
Hello Everyone!!!
I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
Any suggestion would be of great help.
Thks in advance!!!Hey thks for the reply,
We were able to solve the problem by just restarting our database,
i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
[http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
The Exception that appears in the log file is as follows:
[2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) -
Error while changing Service order through BAPI_ALM_ORDER_MAINTAIN.
Hi Frens,
I am facing problem while changing a service order .
I am changing the HEADER ( Planner group & Basic Finish date ) through
BAPI_ALM_ORDER_MAINTAIN.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = 'HEADER'.
lt_methods-METHOD = 'CHANGE'.
lt_methods-OBJECTKEY = l_aufnr.
append Lt_methods.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = ' '.
lt_methods-METHOD = 'SAVE'.
append lt_methods.
lt_header-orderid = l_aufnr.
lt_header-PLANGROUP = 'GE'. " Hard coding for testing
lt_header-FINISH_DATE = '20081114'.
append lt_header.
lt_headerup-orderid = L_AUFNR.
lt_headerup-PLANGROUP = 'X'.
lt_headerup-FINISH_DATE = 'X'.
append LT_headerup.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
IT_METHODS = LT_methods
IT_HEADER = LT_header
IT_HEADER_UP = LT_headerup
RETURN = LT_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
I am getting error No : IWO_BAPI2 ( 118 )" *Order 5001887 cannot be saved, since no operation is maintained."*Hi Balu,
You can refer to the note 966289 which talks about this problem if a service order template is used.
Thanks
Abishek -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh......
Maybe you are looking for
-
More Guru Winners for February 2015 in the SharePoint 2010 category and many others!
It's been a busy week that also saw the TECHNET WIKI SUMMIT 2015 Then we had the results for February's TechNet Guru competition ALSO posted! http://blogs.technet.com/b/wikininjas/archive/2015/03/19/technet-guru-february-2015.aspx Below is a summary
-
Are cross-platform upgrades allowed?
I own a copy of Adobe CS3 for Windows. I have recently purchased a Mac, and need to get Adobe Creative Suite (preferably CS6) set up on it. Do I need to buy a completely new version of Creative Suite for the Mac, or can I buy a Mac upgrade version, a
-
Hi, i´m using badi WORKORDER_UPDATE. i´m trying to check field AFVGD-USR00 (operation, details, field materials group) before saving the changes to this field. i´ve essayed to do it in method BEFORE_UPDATE but the saving takes place before because i
-
Can I list/export more than 3-4 all-day events
Hi: I need a way to list more than 4 all-day events in the monthly view. The three dots up above mean they will list in the daily/weekly view but this does me no good. I also wonder if you can export to .pdf more than 3 all-day events. Why is this no
-
My rotation orientation sensor not working.
I am using iphone5 and I tried everything for the rotation even I showed it to istore engineers, they say my iPhone is perfectly alright, no software neither hardware issues. But still my iPhone does not rotate I don't know why. Photos, videos and ev