Error while Changing log level in Agentry 6.0.44.1

Hi ,
I am trying to change the log level from the Agentry Administration client, but i am getting the below error message.
And it is showing any option to change the log levels for users. How can I change log level for users also.
How can I resolve this error.
Regards,
Shyam

Shyam,
This is fixed or planned fixed in 6.0.46 Agentry Server (supposed to be available anytime soon in the Service Marketplace - it was submitted already to the SMP team). The fix was in SMP 2.3 and SMP 3.0 but it was ported back to the Agentry 6.0.X release. If you have no access to the Agentry 6.0.X patches this means that your SAP License is preventing you from downloading it. You may need to contact the SAP CIC (customer interaction center) group.
Or you can do the manual setup for a workaround for now.
SAP KBA article: 2048202 - AgentryGUI does not allow to change log settings - Not all setttings were successfully changed.
Regards,
Mark Pe
SAP Senior Support Engineer (Mobility)

Similar Messages

  • Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

    Team,
    I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
    Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
    On Google search, i found below article which is best matching for this error
    http://support.microsoft.com/kb/324321
    I have follows each step of troubleshooting. But still the issue persists.
    Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
    Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
    /*  SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
    But there was only one row returned with create date of today's.
    Error while Assigning database level role (db_datareader) to SQL login (Domain Account) 
    Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
    Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
    Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
    I tried other ways also.
    A. Creating login and providing permission in one go only = User account is not created
    B. Instead of GUI, use query to create login and provide required permission = Same error.
    Does anybody has faced any such situation
    Chetan

    See the below output
    srvid
    sid
    xstatus
    xdate1
    xdate2
    name
    password
    dbid
    language
    isrpcinmap
    ishqoutmap
    selfoutmap
    NULL
    0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
    14
    20:25.9
    57:33.4
    UKBAA\LHRAPPMuttavarapuS
    NULL
    1
    us_english
    0
    0
    0
    Chetan

  • I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

    When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

    Ah, see, you said you had done it differently before.
    > and I tried to add a toolbox button by navigating to AcroPDF.dll.
    You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
    Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

  • Budget Exceeded error while changing in Account Assignment

    Hi,
    The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
    Item 010 Order 0809/A15 budget exceeded
    Message no. BP604
    Diagnosis
    In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
    The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
    Need the suggestion.
    JK

    I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
    umakanth

  • Error while changing modules

    On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

    Hi Atul Saini.
    It is unbelievable how miserable the ADOBE support is.
    Iam sorry - but Iam awaiting answers, as we are paying
    since nearly a month and Lightroom does not work at all.
    Can you help or what is happening?
    Thanks.
    Really angry.
    Julia Ufer
    2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
        Error while changing between modules
    Jeff A Wright
    <https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
    marked Atul_saini123
    <https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
    reply on Error while changing between modules
    <https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
    helpful. View the full reply
    <https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

  • Error while changing between modules

    Dear Know-it-All out there.
    Iam a Newbie - Middlebie Photosop User , so to keep it short.
    We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
    is occurring while starting Lightroom and the program cannot be used properly.
    There seems no chance to create a catalog properly, the Library just
    does not open any menu which it should do.
    Adobe Support could not work it out either so roar, their suggestions was
    to restart in safety mode / deleting library 5plist / plus many more
    little stuff which actually did not help.  This is already the second installation ,
    same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
    Any ideas? Thank you so much and kind regards.
    Julia

    Hi Atul Saini.
    It is unbelievable how miserable the ADOBE support is.
    Iam sorry - but Iam awaiting answers, as we are paying
    since nearly a month and Lightroom does not work at all.
    Can you help or what is happening?
    Thanks.
    Really angry.
    Julia Ufer
    2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
        Error while changing between modules
    Jeff A Wright
    <https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
    marked Atul_saini123
    <https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
    reply on Error while changing between modules
    <https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
    helpful. View the full reply
    <https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

  • Receiving "Error truncating change log: null" after redeploying application

    Hi,
    I am running Weblogic 8.1 SP5 on Windows 2003. We are running into a problem where we redeploy an EAR on the server and it's causing an error "Error truncating change log: null" in the admin server. Here are the basic steps:
    1) We have an application from a third-party that is deployed to the managed nodes in a cluster.
    2) We Stop the application.
    3) We redeploy the application. The application redeploys ok.
    4) We stop the application for a 2nd time.
    5) We redeploy the application. This time, the server reports that it's in progress forever. This is when we start to see the errors in the log.
    6) To get the server back, we need to shut down the managed and admin servers.
    7) We have to kill the java.exe process on each node.
    8) We have to delete the ldap directory on the admin node.
    9) Once we restart the server, we are back again.
    So, after receiving hundreds (maybe a few thousand), we get the error:
    java.io.IOException: More than 2048 open files
    If anyone has any idea what's happening, it would be greatly appreciated.
    Thanks,
    Eric
    Here is the full stack trace:
    ####<Sep 2, 2011 12:44:15 PM EDT> <Error> <EmbeddedLDAP> <cdtscms11p> <VgnAdminServer> <ExecuteThread: '4' for queue: 'weblogic.kernel.System'> <<WLS Kernel>> <> <000000> <Error truncating change log: null>
    ####<Sep 2, 2011 12:44:15 PM EDT> <Error> <EmbeddedLDAP> <cdtscms11p> <VgnAdminServer> <ExecuteThread: '4' for queue: 'weblogic.kernel.System'> <<WLS Kernel>> <> <000000> <java.io.IOException: More than 2048 open files>
    ####<Sep 2, 2011 12:44:15 PM EDT> <Critical> <EmbeddedLDAP> <cdtscms11p> <VgnAdminServer> <ExecuteThread: '4' for queue: 'weblogic.kernel.System'> <<WLS Kernel>> <> <000000> <java.io.IOException: More than 2048 open files
         at java.io.RandomAccessFile.open(Ljava.lang.String;I)V(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:204)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:94)
         at com.octetstring.vde.replication.BackendChangeLog.open(BackendChangeLog.java:192)
         at com.octetstring.vde.replication.BackendChangeLog.truncate(BackendChangeLog.java:183)
         at com.octetstring.vde.replication.BackendChangeLog.receiveEntryChanges(BackendChangeLog.java:540)
         at com.octetstring.vde.backend.BackendHandler.modify(BackendHandler.java:717)
         at com.octetstring.vde.operation.ModifyOperation.perform(ModifyOperation.java:144)
         at com.octetstring.vde.MessageHandler.doModify(MessageHandler.java:280)
         at com.octetstring.vde.MessageHandler.answerRequest(MessageHandler.java:73)
         at com.octetstring.vde.WorkThread.executeWorkQueueItem(WorkThread.java:83)
         at weblogic.ldap.LDAPExecuteRequest.execute(LDAPExecuteRequest.java:28)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
    >
    ####<Sep 2, 2011 12:44:15 PM EDT> <Error> <EmbeddedLDAP> <cdtscms11p> <VgnAdminServer> <ExecuteThread: '2' for queue: 'weblogic.kernel.System'> <<WLS Kernel>> <> <000000> <java.lang.NullPointerException: null>

    Chris
    Could you please tell us what version of DVD SP your are using?
    If its 3.x or earlier, then A.Pack should be used.
    If it's 4.x, then you will need to use compressor's, Dolby 2.0 audio encoding, because A.Pack will have been removed by the DVD SP 4's installer.
    There are also adjustments you will need to make to the basic settings of the Dolby 2.0 settings that come with compressor or A.Pack, to get the best output.
    Here's a how to: http://www.kenstone.net/fcphomepage/a_packwarmouth.html

  • Change log level at runtime

    Is there any way to change a logger's level at runtime?
    I would like to change between INFO and DEBUG on some features I'm working on without restarting Kura.
    Thanks

    I know this feature has been added again, but its accessible only through OSGi console. I developed a simple web interface to change log levels at runtime.
    I uploaded the project on my github page. It compiles with Maven 3.0.5 as deployment package, you can install it on any running kura instance.
    I find it very useful when developing/debugging, hope it may help someone else.

  • Error while Changing Vendor

    Dear all
            I am getting the below error while changing the vendor master.
    "Tax code 1 must be numerical
    Message no.AR144  "

    go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
    Thx
    Raju

  • Error while Changing IO group

    HI Gurus
    I facing problem while changing IO group using T code KOH2
    some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error  'Position cursor correctly' .
    Is there is any resion that IO got gray out ?
    Thanks
    Avadhut

    Hi,
    Go to KOH2
    Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
    Regards,
    Jigar

  • Error while changing the physical IP address of SOA related datasource

    Hello Everyone!!!
    I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
    I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
    But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
    After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
    B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
         at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
         at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
         at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
         at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
         at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
         at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
         at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
         at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
    Any suggestion would be of great help.
    Thks in advance!!!

    Hey thks for the reply,
    We were able to solve the problem by just restarting our database,
    i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
    [http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
    but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
    Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
    The Exception that appears in the log file is as follows:
    [2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
    query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
    Check the XML schema and make sure your query string is valid
    [2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
    java.lang.Exception: BPEL compilation failed
         at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
         at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
         at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
         at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
         at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
         at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
         at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  • Activation error while changing the data type of a field of a table

    hi friends,
    i am facing one problem while changing a data type of a field of a table.
    i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
      while changing to NUMC data type activation error is comming as below.
    Table is not yet classified                           
    Field ZTOTAL_COUNT: Type change                       
      ALTER TABLE is not possible                         
    Structure change at field level (convert table YQM32) 
    Check on table YQM32 resulted in errors   
    Table YQM32 could not be activated                       
    (E- Structure change at field level (convert table YQM32)
    plz suggest.i need to change the data type from char to numc.
    Thanks & Regards

    Hi Pabitra......
    From the SE11 change the table as u wanted and then from menubar select
    UTILITIES--> DATABASE UTILITY
    It will open database utility
    there u select the Activate and adjust database button.
    then the database table will get adjusted.
    just try it once.........
    Suresh......

  • Getting error while fetching Log data using B1TE Tools

    Hi,
    i am using B1TE Tools to test an add on which generating an error while fetching the Log File using DI Logs Reader. The error is below:
    "Wrong Xml file format. "The data at the root level is invalid, Line 1, position 1.".
    please report it on B1TE blog"
    Please help..
    Regards,
    Sunita

    > Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
    >
    > so in that way :
    > bot the options are fine what ever take less time.
    Sorry mate, but YOU have to know what you want here.
    I gave you an easy to follow set of steps.
    As you don't seam to mind the outcome, just might just use them...
    > I wanted to know weathe i can use the  loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
    We had this discussion before...
    >
    > For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
    >
    > For ease of use you could also just do:
    > - logon as superdba
    > - drop user SAPR3
    > - create user SAPR3 password SOMEPW not exclusive dba
    >
    > After these steps you can easily pump the data into the database again.
    >
    > So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
    >  i already have that user SAPR3 can i use the same.
    Yes, you do have the SAPR3 user.
    But you don't seem to like to read documentation or learn about how the tools work or anything like that.
    Therefore I gave you s simple way to reach your goal.
    Of course it's possible to reuse the user.
    But then you would have to deal with already existing tables, already existing data etc.
    You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
    regards,
    Lars

  • Error while updating patch level 11 of HR

    Dear All,
    I am getting following error while updating HR patch level 11.
    Phase OBJECTS_LOCKED_?: Objects Locked in Requests
    Request      Names of Locked Transport Objects
    MRDK900089   LIMU REPS H99_POST_PAYMENT
                 LIMU REPS RPCIPE00
    MRDK900542   R3TR FORM HR_IN_TAXF16000Y
    the above request is in other client, and it is a local request, which is not getting transported; i mean it does not allow to transport. give the following error.
    Object messages: R3TR CINS 01200615322 0000824666
    Transport objects from package PCPO to target MRP only
    Object messages: R3TR NOTE 0000970953
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG DATA_TOP_FILL_TEXT
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU METH CL_HRPAY99_POSTING_LOG PUT_PERNR_INFO
    Transport objects from package PCPO to target MRP only
    Object messages: LIMU REPS H99_POST_PAYMENT
    Transport objects from package PCPO to target MRP only
    Please help me how to rectify.
    Thanks n regards
    Bhaskar

    Hello Bhaskar,
    is the transport already approved?
    If not approve it and try it again. (also it is a local one)
    If not check the objects and unlock them manually the following way:
    SE03 => Unlock Objects (Expert Tool)
    But if you approve your transport... the objects should be unlocked.
    Regards
    Stefan

  • Error while changing PO in SRM extended classic Version 5.0

    Hi Guys,
    we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
    The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
    Thanks
    Srujank

    Hello Srujan,
    Go through the following thread:
    Re: PO status change
    Hope it helps.
    Thanks,
    Neelima

Maybe you are looking for