Error while changing PO in SRM extended classic Version 5.0

Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
Srujank

Hello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima

Similar Messages

Manually blocking SRM Extended Classic PO invoices

Hi All,
I understand that in tcode MRBR, when we select the radio button: Manual Payment Block, we can see those invoices blocked at the Header Level. (tcode MIR4, Payment tab, Pmnt Block field)
It seems that only those invoices blocked at the time of invoice data entry (MIRO) are displayed. But many times, we need to manually block the invoice AFTER it has already been entered and those are not displaying in MRBR.
We are using SRM Extended Classic Config (if that matters) and are on ECC 6.0 SP10. To block the invoice after the invoice has already been posted, we need to use tcode FBL1N to find the coordinating FI doc # and block it in that transaction code. When we do that, it does show the block on the coordinating MM invoice number when viewing in MIR4, but it doesn't show in MRBR. In other words, table BSEG shows the block, but table rbkp_blocked does not.
Is there another way to manually block at the header level AFTER the invoice has been entered?? (so that it shows on the MRBR report). Or is this a possible error with SAP's FI/MM integration?
I thought I'd post my question here first before submitting an OSS message.
I'd appreciate any guidance on this,
Cindy

Decided to just create custom reports to view blocked invoices either in FI or MM.

I get an error while changing modules pop up when opening Lr. There is no import button to use and if I try to load the default catalog I get the error message again essentially making Lr completely unusable for me! please help

When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help

Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class?

Budget Exceeded error while changing in Account Assignment

Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JK

I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth

Error while changing modules

On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

SRM Extended Classic with eSourcing

Hi Team,
We are using ECC 6.0 with eSourcing and SRM 5.0 with Classic Scenario.
Now we are planning an upgrade from SRM 5.0 to SRM 7.0 and want to do the Extended Classic Scenario. This will help us to do additional functionalities of SRM.
eSourcing can be used for Strategic RFx and CLM functionalities.
SRM can be used for SC, Operational Sourcing and PO. We can also use the SRM-SUS Scenario for PO confirmation and Invoices.
Have any one used eSourcing with SRM Extended Classic? In that case, please provide some light into how to use all these application to better streamline the overall Source to Procure strategy.
Also, do you think Classic is the way to go or Extended Classic is better? Any documents or pictures are greatly appreciated.
Thanks
Jogy

Hi
SAP provide standard integration b/w ECC and Esourcing/ CLM (PR (both inbound and outbound). However in case you decide to go with extended classic scenario,you might need e Sourcing/ CLM integration with SRM (since PO would be created in SRM) which is not provided out of the box by SAP. However custom interface (based on flat file transfer) can be built b/w SAP SRM and e Sourcing.
MM-SUS scenario is not much different from EBP-SUS scenario in terms of functionality.
Regards
Mudit Saini

On Time Delivery Metric ( SRM Extended Classic Scenario)

Can anyone provide feedback on how you are measuring suppliers on time delivery performance based on SRM Extended classic POs. We are currently trying to use the Stat-Rel Date (SLFDT) in R3 to measure Original commitment date vs. Actual delivery date to get our OTD Metric However when we create an ECS PO with Reference to an R3 Requistion the SLFDT date is populated with the Requistion delivery date and not the delivery date on the Purchase Order.
R3 Version ECC 6.0 SP 12
SRM 5.0 SP 9
Thanks,
Erick Sick

Hi,
Have you defined your Log systems in both SRM and ECC? Have you assigned a client to the logical system? Are you sure that all RFC connections are working fine?
Regards,
Nikhil

SAP eSourcing with SRM Extended Classic Scenario

Hi Team,
We are using ECC 6.0 with eSourcing. Currently we use SRM 5.0 with Classic Scenario.
Now we are planning an upgrade from SRM 5.5 to SRM 7.0 and want to do the Extended Classic Scenario. This will help us to do additional functionalities of SRM.
eSourcing can be used for Strategic RFx and CLM functionalities.
SRM can be used for SC, Operational Sourcing and PO. We can also use the SRM-SUS Scenario for PO confirmation and Invoices.
Have any one used eSourcing with SRM Extended Classic? In that case, please provide some light into how to use all these application to better streamline the overall Source to Procure strategy.
Also, do you think Classic is the way to go or Extended Classic is better? Any documents or pictures are greatly appreciated.
Thanks
Jogy

Hi
SAP provide standard integration b/w ECC and Esourcing/ CLM (PR (both inbound and outbound). However in case you decide to go with extended classic scenario,you might need e Sourcing/ CLM integration with SRM (since PO would be created in SRM) which is not provided out of the box by SAP. However custom interface (based on flat file transfer) can be built b/w SAP SRM and e Sourcing.
MM-SUS scenario is not much different from EBP-SUS scenario in terms of functionality.
Regards
Mudit Saini

Error while changing between modules

Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
Julia

Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771>

SAP SRM Extended Classic Cookbook

I am a newbie of SRM, I must look for some book to start, Could you give me a hand, Maybe you can give me a ebook for SRM,such as <SAP SRM Extended Classic Cookbook>, thanks in advance
Message was edited by:
justin shen

Hi
I recommend you go ahead with online SAP help. It covers everthing what you require (from Basic / Beginner level to Advanced level).
Best way is to learn from SAP online help. Please refer to following links
http://www.ies.state.pa.us/srm/cwp/view.asp?a=3&q=197102&srmNav=|
http://help.sap.com/saphelp_srm40/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm30/helpdata/en/80/f9a93e08503614e10000000a114084/frameset.htm
SDN WIKI page in section Supplier Relationship Management
service.sap.com/instguides -> SAP Business Suite Apps. -> SAP SRM.
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/content.htm
Best Practices of SRM
Just check whether the info on following page helps you.
http://www.sap.com/solutions/business-suite/srm/businessbenefits/index.epx
http://help.sap.com/bestpractices/BBLibrary/bblibrary_start.htm
Also, I will send you some helpful documents later on.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul
Do not forget to award full points )

Error while Changing Vendor

Dear all
I am getting the below error while changing the vendor master.
"Tax code 1 must be numerical
Message no.AR144 "

go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
Thx
Raju

UNCAUGHT_EXCEPTION while creating Purchase Order in Extended classic SRM 7

Hi Experts,
I am getting the following message while creating Manual or SC/PO in Extended classic Scenario (SRM7.0 with ECC 6.0)
Pl suggest what could be the problems.
Error application is coming up.
20091130
E2001
172331
wicomp03
http://wicomp03.wipro.com:8003/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
UNCAUGHT_EXCEPTION
An exception has occurred in the procurement document methods
Form: DETERMINE_MATNR of program SAPLBBP_BD_DRIVER_46A
Form: FILL_BAPI_POITEM of program SAPLBBP_BD_DRIVER_46A
Form: MAP_BBP_DPO_TO_BAPI of program SAPLBBP_BD_DRIVER_46A
Function: BBP_DPO_TO_BAPI_MAP of program SAPLBBP_BD_DRIVER_46A
Method: IF_EX_BBP_DOC_CHECK_ICC~BBP_DOC_CHECK of program /SAPPSSRM/CL_PO_TOLERANCE=====CP
Form: DOC_CHECK_BADI_CALL of program SAPLBBP_PD
Form: PROCDOC_CROSS_CHECKS of program SAPLBBP_PD
Form: PROCDOC_UPDATE of program SAPLBBP_PD
Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_BASE~SAVE of program /SAPSRM/CL_PDO_BO_PO==========CP
http://wicomp03.wipro.com:8003/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
Regards,
Mohan Raj

The same error should appear in ST22. Run the transaction and locate this error entry. Then set an external break point at the statement before the dump and run the scenario in debug mode. You should be able to identify the error from there.

Buffer table not up-to-date error while working with local SRM PO

Hi all,
We are working in SRM 7.0 with extended classic scenario.
I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
UNCAUGHT_EXCEPTION
Buffer table not up-to-date
Function: BBP_PD_ABORT of program SAPLBBP_PDH
Form: ABORT of program SAPLBBP_PDACC
Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
Form: PROCDOC_UPDATE of program SAPLBBP_PD
Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same . Request your kind help in this regard.
Thanks in advance.
Regards,
Kalyani

There could be many issues..
or some data issue.
can you recreate the same issue you can fix it.
it could only one incident so you should thoroghly check what piece of data is wrong.
what actions are you doing in the purchase order.
Note 1580496 - Purchase order Buffer table not upto date dump in change ver
Symptom
1.Create a change version on any Purchase order.
2. Edit quantity of any item
3. Dont press 'Enter key'
4. Clickk on Order button.
Application gves dump 'Buffer table not upto date'
but it is very difficult to say what is the issue. request your technical resource to look your dump.
if you recreate the issue half of the problem resolved.

Error while changing PO

We are having a problem After a PO is ordered, you come back and change the PO (Quantity, Account assignment or add a new line) The PO errors out with incorrect account assignemnt. Even if you delete a line on previously created PO we get same error. I looked up OSS notes and note 918450 looked like will address this issue but applying the note did not help. Any ideas on how to fix this problem? Has anyone faced the same in past. We are on SRM 4.0 and extended classic scenario.
Jay

Hi
check the following notes if this is happening for service and limit PO's
0000561507 BAPI_PO_CHANGE for services encompasses 579205, 593428, 579987, 630097, 600019.
0000723554 Too many account assignments in service package / ite.
OSS notes 585410 + 586419
Previously we had similar problem with service PO's.
After implementing 561507, 585410 + 586419 we solved the problem. These notes has to be applied in R3 side.
Rgds
Reddy

SRM: Extended Classic scenario: Request your help.

Hi Guru's,
We are implementing the EXTENDED CLASSIC SCENARIO in our project. kindly request your help.
in our project the SRM box is : G3OSBSR102.
R/3 backend Box is : RCHSBR3142.
Now when i create a shopping cart it should create the Purchase order In SRM( G3OSBSR102) and also copy the created purcahse order in teh backend system : RCHSBR3142.
The issue here is which Logical system should be populated in the field at item level when creating the shopping cart :BE_LOG_SYSTEM.
1) In this field: BE_LOG_SYSTEM.
If i populate the SRM local: G3OSBSR102., then it will consider the Business object type as : BUS2201and creates the local Po but while transfering this local created document(PO) to R/3 system is loosing the Logical system at the item level of the PO.
If i populate this field at the item level via DEBUGG mode then system is sucessfull in transferring the document to R/3.
2) In this field: BE_LOG_SYSTEM.
If i populate the SRM local: RCHSBR3142, then it will consider the Business object type as : BUS2012 and creates the purchase order in R/3 system and will not create teh local purchase order.
Kindly request your help for any further settings if i did miss.Appreciate your help in this regards.
Many Thanks,
Prasad NN.

Dear Prasad,
To work on Extended Classic Scenario, you just have to maintain the following configuration in SPRO:
>SAP Supplier Relationship Management
>SRM Server
>Cross-Application Basic Settings
>Activate Extended Classic Scenario
Check the flag "Extended Classic Scenario Active".
You dont have to manipulate "BE_LOG_SYSTEM" field to choose your scenario.
Regards
Thiago Salvador

Error while changing PO in SRM extended classic Version 5.0

Similar Messages

Maybe you are looking for