Error while changing the master recipe (C202)

In transaction C202 (Material master recipe), I am trying to make a change but getting error message :Update was terminated.
I am trying to change a master recipe which contains an error. Recipe: A61234 transaction C202.
Thanks.

Hope, By this time you must have resolved this issue at your end. Due you know any root cause, If yes, could you please share it with us.

Similar Messages

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Error while changing the physical IP address of SOA related datasource

Hello Everyone!!!
I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
     at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
     at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
     at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
     at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
     at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
Any suggestion would be of great help.
Thks in advance!!!

Hey thks for the reply,
We were able to solve the problem by just restarting our database,
i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
[http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
The Exception that appears in the log file is as follows:
[2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
     at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
     at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
     at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
     at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
     at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
     at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
     at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Error while changing the Display Attribute into Navigational Attribute

Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B Venugopal

Hi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh

Error while changing the component quantity

Hi Experts,
I facing an issue, while changing the component quantity of the process order. Parent material have fixed lot size and the componenets maintained as fixed quantity in BOM. When I try to change the quantity of the components in process order, it showing an message "Please re-explode the BOM, since the component quanities are changed.
Why am getting this message?
Regards,
Sureshbabu G.

Hi
As Mr Reddy said, there is a fixed quantity indicator ticked in the BOM, therefore you are getting that error. Please remove the tick in BOM in the item details besides the quantity field and then try changing the quantites while confirming.
Chandra

Error while changing the UoM in material master

Hi experts....
I am not able change the UoM in the material master. Even if, all the PR , PO and reservations are cancelled .
It still gives me error message " Manual Reservations already exists "
Thanx
Ganesh

Hi
may be some entries got not cancelled properly and entries got locked.
Just check in SM12 if no entries are locked.
regards
Sidi

Error while activating the Master Data InfoSource for attributes

Hai
Im trying to load the attributes for master data characteristics .
I created the InfoSource and when im trying to activate it .
Then it gives the following error like below
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        505
Message:    The data object "P_S_COMM" has no component called
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'
So please tell the what is the error and how to resolve this issue.
And pls give the error 'RSAR 245' message from SAP note system.
I will assign the points
bye
rizwan

hi Rizwan,
check if helps Note 602318 - RSAR 245 error analysis with RSTMPL80
Summary
Symptom
The process of generating transfer rules or loading data terminates with error RSAR 245.
The long text for error message RSAR 245 indicates the cause of the generation error.
1. Error code: 6
a) Message: The P_S_COMM data object has no component
This is very likely to be due to an 'obsolete' communication structure.
b) Message: <table name> is already declared.
c) Other messages
2. Error code: 7
Other terms
RSAR245, RSAR 245, activate transfer structure, monitor, request
Solution
1. Error code: 6
a) 'Obsolete' communication structure:
            Due to an optimization algorithm, pressing the 'Generating button' does not have any affect on the communication structure. Therefore, use the following workaround:
Select 'Communication structure' -> 'Change'.
Add any InfoObject (for example, '0MATERIAL') to the communication structure -> 'ENTER'.
Communication structure ---> 'Save'
Selet the InfoObject you inserted and delete it.
Communication structure ---> 'Save'
Communication structure -> 'Generate'.
a) Message: <table name> is already declared. Check whether the local part of your routines contains TABLE statements. TABLE statements always have global validity and should therefore be in the global part of the routine.
b) If the error occurs when data is being loaded, the transfer rule should be generated using RSA1.
In many cases, generating transfer rules using RSA1 results in a detailed error message.
2. Error code:
           Program to be generated is locked by parallel process.
This error can sporadically occur if parallel processes simultaneously try to generate the same program.
Unfortunately, you cannot completely prevent the error from occurring since these types of lock situations can still crop up during data loading in parallel processes. We are currently working on improving system stability relating to lock situations during the load task.
Reloading usually works without any problems.

Activation error while changing the data type of a field of a table

hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & Regards

Hi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh......

Costing error while change the mrp data

Hi dears,
This is Rem process. when i try to change the material master MRP data ex. ( mrp type M1 to M0)
system not allow to change and show the error as
Product cost collector 000000750122 is still active (assigned to PrCtr 50601-025)
pls give some hints to clear
Any program is there to change the MRP data for the material master in production server directly
thanks

Dear ,
Did you try MASS or MM70 Transction ?
If you do not want to go for Deletion flag of PCC , you need to settle the REM qty .You need to do product cost for semi finished product and finsihed product in KKF6N and after that you have to do mark and release in CK24N .For standard cat Estimate create std Cost estimation(CK11n) and std cost Estimation Mark & release(CK24) .
1.Backflush (confirmation) the Planned order - MFBF. Results planned order will Reduced and GR,GI, activity cost will be posted. U need not convert the planned order to production order, Confirmation for planned order only.
2.To see Backflushed documents MF12
3.Then Goto KKF6n to see the Manufaturing cost.
4.Over head calculation - (Co42)
5. Variance calculation (KKS6)
6.Settlement(KK87)
Try and revert back
Regards
JH

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Lock error while Changing the Routings through IDoc

Hi All,
we are trying to change the routing by passing change mode X using IDoc /SAPMP/ROUTING01 with message type /SAPMP/ROUTING and we using the function module /SAPMP/IDOC_INPUT_ROUTING to process the IDoc. We have no problem while creating but when we are trying to change we getting errors that Header, Operation & Sequence cannot be locked (lock management error).
On executing this IDoc we are getting errors with meggase No. CPCL015 Header cannot be locked(lock management error), CPCL218 Operation cannot be locked(lock management error), CPCL115 Sequence cannot be locked (lock management error).
Please help me in resolving this isuue.

Use OP77 to define work area. Check the flag for locking the header and use that work area in BAPI interface for changing the task

Error while changing the Resource Object Status

Hi,
I am trying to change the resource object status from Waiting to Provisioned for a self service task. Before approval I see the Resource Object Status as " Ticket Sent To REMEDY" on the administrator's web console and at the Requestor's web console I get the following error message-
???en_US.global.viewProfileForm.Lookup.Ticket-Sent-to-REMEDY???
But after approval, based on the completion the task, the process on both the consoles is set to provisioned. That is what I want to display but the problem comes when the requestors sees the error status message on its console before approval.
Can any body tell me the reason of the above error and how to resolve it?
Thanks in advance

do you have any custom written event handlers getting triggered off after request submission or during approval?
It might also be due to either a browser issue or you might have missed any entry in the xladmin properties file for a custom label/error message etc.

Error while changing the data source at runtime

Hi All,
I want to change the DB connection(from Dev to QA) in the code before viewing it to the user. I browsed through the samples and found a code. But when I', trying to use the code, I'm getting the following error.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon Error: invalid arguments in call---- Error code:-2147217393 Error code name:dbLogonFailed
The following is the code:(Bold - problem area)
private static void switch_tables(DatabaseController databaseController) throws ReportSDKException {
final String DBUSERNAME = "irs_tin";
final String DBPASSWORD = "monica30";
final String SERVERNAME = "n3qvdb999.1dc.com";
final String CONNECTION_STRING = "Use JDBC=b(true);Connection URL=s(oracle.jdbc.OracleDriver://n3qvdb999.1dc.com:1631);" +
                                                   "Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(n3qvdb999.1dc.com);" +
                                                   "User ID=s(irs_tin);Password=;Database=s(IRSQA);Trusted_Connection=b(false);" +
                                                   "JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;" +
                                                   "DatabaseName={database};user=;password=!)";
final String DATABASE_NAME = "IRSQA";
          final String URI = "!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;DatabaseName=;user=;password=!";
          final String DATABASE_DLL = "crdb_jdbc.dll";
          Tables tables = databaseController.getDatabase().getTables();
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
               //Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
IConnectionInfo connectionInfo = table.getConnectionInfo();
PropertyBag propertyBag = new PropertyBag();
propertyBag.put("Trusted_Connection", "false");
               propertyBag.put("Server Name", SERVERNAME); //Optional property.
               propertyBag.put("Connection String", CONNECTION_STRING);
               propertyBag.put("Database Name", DATABASE_NAME);
               propertyBag.put("Server Type", "JDBC (JNDI)");
               propertyBag.put("URI", URI);
               propertyBag.put("Use JDBC", "true");
               propertyBag.put("Database DLL", DATABASE_DLL);
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);table.setConnectionInfo(connectionInfo);
databaseController.setTableLocation(table, tables.getTable(i));
Thanks for your time.

Hi Guys,
I managed to fix my problem.
I have used the method in the utility class at this location:
http://code.google.com/p/struts2demos/source/browse/trunk/Struts_Demo_ThirdDemo/src/com/businessobjects/samples/JRCHelperSample.java?r=4
-Anil

Error while changing the master recipe (C202)

Similar Messages

Maybe you are looking for