Error while changing useful life
Hi,
I was trying to change the Dep Key to 0000(No depreciation) with useful life of 39. I tried changing the useful life to 1 and 0 and I still could not make the change, I got the red message "Useful life exceeds allowable value". This assets have land lease.
Thank You,
Mark
Hi,
I have checked and their is a Z_lease table which has notice date specified to it. If I change notice date, then I am able to change master data. Now my question is do we need this lease table ? cause this is tied to asset default usefull life during implementation phase. At least tax books should not be tied to this lease table. Is their a process to tie/untie this table?
Thank You,
Mark
Similar Messages
-
Sales Order - Error while changing using BAPI
Hi,
I would want to compare the system price and the expected price for a sales order and in case of any discrepancy, set a 'reason for rejection' code. I'm using the bapi 'BAPI_SALESORDER_CHANGE' to make changes to the sales order (setting the rejection code). This is working fine in cases where there is some value for both the prices but is throwing an error while the system price is null.
Is there any way to overcome this error and still set the rejection code or should we make any changes in the config to let the system allow to save changes when the system price is null.
Thanks in advance.The message you mention - ZZ054 - seems to be a non-standard one - it may be generated by some of your user-exits. Check this in SE91-> "Where-used list" (standard system should allow saving the document in case of incimplete pricing - that's why you may have an exit which prevents this).
If so, you might modify your user-exits accordingly - to allow saving the document in cases defined by you.
Another approach (not sure if this will be a solution in this case but you may check): see parameter BEHAVE_WHEN_ERROR of fm BAPI_SALESORDER_CHANGE.
regards -
When launching Lr i get the initial screen to come up followed by an "error while changing modules" pop up. I have uninstalled and re-downloaded, followed all the suggested trouble shooting fixes and still nothing. When the app starts it has the basic info boxes but without any options in them (i.e. no import button or any buttons at all for that matter).All my other creative cloud apps seem to be working fine but Lr won't. Please help
Ah, see, you said you had done it differently before.
> and I tried to add a toolbox button by navigating to AcroPDF.dll.
You'll need to reinstall Reader if the libraries aren't registered. You can't register them manually.
Perhaps if you posted some of your code (where it creates the objects, etc.) we might be able to give you some more advice. You're sure you aren't trying to use anything outside of the AxAcroPDFLib.AxAcroPDF class? -
Error while changing between modules
Dear Know-it-All out there.
Iam a Newbie - Middlebie Photosop User , so to keep it short.
We just installed CC with Lightroom & PS. The problem „Error while changing between modules“.
is occurring while starting Lightroom and the program cannot be used properly.
There seems no chance to create a catalog properly, the Library just
does not open any menu which it should do.
Adobe Support could not work it out either so roar, their suggestions was
to restart in safety mode / deleting library 5plist / plus many more
little stuff which actually did not help. This is already the second installation ,
same problem as with the first. We are working on a IMac 2.9GHz, i5, 8GB 1600Mh, OSX 10.9
Any ideas? Thank you so much and kind regards.
JuliaHi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771> -
Budget Exceeded error while changing in Account Assignment
Hi,
The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
Item 010 Order 0809/A15 budget exceeded
Message no. BP604
Diagnosis
In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
Need the suggestion.
JKI think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
umakanth -
On a Mac, did digital download from B&H. Has never worked because error while changing modules. Did EVERY step in forums. Nothing. Still under manufacturers warranty, need to talk to actual customer rep but only gives me option to post question on forum. So far this is more than annoying to have to deal with.
Hi Atul Saini.
It is unbelievable how miserable the ADOBE support is.
Iam sorry - but Iam awaiting answers, as we are paying
since nearly a month and Lightroom does not work at all.
Can you help or what is happening?
Thanks.
Really angry.
Julia Ufer
2014-09-05 21:50 GMT+02:00 Jeff A Wright <[email protected]>:
Error while changing between modules
Jeff A Wright
<https://forums.adobe.com/people/JeffAWright?et=watches.email.outcome>
marked Atul_saini123
<https://forums.adobe.com/people/Atul_saini123?et=watches.email.outcome>'s
reply on Error while changing between modules
<https://forums.adobe.com/thread/1566317?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/6703771?et=watches.email.outcome#6703771> -
Dear all
I am getting the below error while changing the vendor master.
"Tax code 1 must be numerical
Message no.AR144 "go to XK02 and check what tax maintained in Tax Number 1 field of Tax Information tab in Control Data Screen for the Vendor..
Thx
Raju -
HI Gurus
I facing problem while changing IO group using T code KOH2
some of the IO are gray out ,while selecting such IOs for changing its IO group System is not allowing me to select these IO and giving error 'Position cursor correctly' .
Is there is any resion that IO got gray out ?
Thanks
AvadhutHi,
Go to KOH2
Select the order by pressing F9. Now place the cursor where you want to put the order group. i.e on same level or Lower level.
Regards,
Jigar -
Error while changing Service order through BAPI_ALM_ORDER_MAINTAIN.
Hi Frens,
I am facing problem while changing a service order .
I am changing the HEADER ( Planner group & Basic Finish date ) through
BAPI_ALM_ORDER_MAINTAIN.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = 'HEADER'.
lt_methods-METHOD = 'CHANGE'.
lt_methods-OBJECTKEY = l_aufnr.
append Lt_methods.
lt_methods-refnumber = '000001'.
lt_methods-OBJECTTYPE = ' '.
lt_methods-METHOD = 'SAVE'.
append lt_methods.
lt_header-orderid = l_aufnr.
lt_header-PLANGROUP = 'GE'. " Hard coding for testing
lt_header-FINISH_DATE = '20081114'.
append lt_header.
lt_headerup-orderid = L_AUFNR.
lt_headerup-PLANGROUP = 'X'.
lt_headerup-FINISH_DATE = 'X'.
append LT_headerup.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
TABLES
IT_METHODS = LT_methods
IT_HEADER = LT_header
IT_HEADER_UP = LT_headerup
RETURN = LT_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
I am getting error No : IWO_BAPI2 ( 118 )" *Order 5001887 cannot be saved, since no operation is maintained."*Hi Balu,
You can refer to the note 966289 which talks about this problem if a service order template is used.
Thanks
Abishek -
Error while changing base unit of measurere
Dear
i hav prob. while changing base unit of measure system gives error massage is material used in BOM, ECM is activated in our system and that material is showing only when valid from date is not entered othervise that material is not shown in BOM.how to remove that material from so i can change base unit of measure.HI
You can only change the BUM if there is no stock production order planned orders reservations, PO s etc are not in the system there should be no transaction of the material ,after ensuring all this, u can change unit of measure
For more info
check these threads
Base unit of measure cannot be changed
Re: BOM unit of measure
change base unit of measure
Regards
Anupam Sharma -
Error while changing the Display Attribute into Navigational Attribute
Hi all.. Gud Mrng.
I was changed the attribute (product) from display attribute into navigational attribute and while save and activating the info object it is not getting activated and it is throwing the below error message.
Error Message: u201CThe Info object is being used in several data targetsu201D
My Questions:
i) Do I need to delete the data from all the data targets (where this info object is using)??
ii) Do I need to delete data only from the main info object (Zmaterial)? Is this single action enough?
Please suggest me which action I need to follow & What are the precautions need to take while changing the Display Attribute (product) into Navigational attribute of info object (Zmaterial).
Thanks in advance.
Thanks & Regards,
B VenugopalHi Garima
Only in case of key figures we cannot change it from display to navigational.
If the info object is a characteristics then in the General tab of the info object if you select 'attribute only' then the iobj would be a display attribute only. If you leave it unmarked then you can use the iobj as a navigational atribute.
I am sure you know that these settings only mean if a IOBJ can be used as display or navigational. To use it as a navigational within another object you will have to change the settings from 'DIS' to 'NAV' for the said info object in the 'Attributes' tab of its parent info object.
Further if you use the parent info object in any data target / infio provider you will have to further mark the info object as 'navigational' while defining the attrbute of the said data target / info provider. The info object gets displayed in the data target / info provider attribute properties as 'parent IOBJ_info object'
Cheers
Umesh -
Error while changing PO in SRM extended classic Version 5.0
Hi Guys,
we are facing issue while changing PO in SRM , this is extended classic with version 5.0.
The system status is active() is error message and PO remains unchanged. Kindly help to resolve this issue. we have an approval for even PO if a user changes the qty in the PO then it calls the approval WF logic.
Thanks
SrujankHello Srujan,
Go through the following thread:
Re: PO status change
Hope it helps.
Thanks,
Neelima -
Error while changing the physical IP address of SOA related datasource
Hello Everyone!!!
I am facing a problem while changing the ip address of my SOA related datasource in weblogic 10.3,Below is a brief description about my prb:
I have created a domain in weblogic 10.3 and have configured a datasource to it and its working fine initially.
But i had to change the ip address of my datasource(i.e Edit the existing the setting of my domain) as my database was migrated to another m/c.The changes that i did was,I changed the url in the connectionpool tab of each of the datasource's listed in admin console(Please let me know if i have left out any other important place in which i had to make this change).
After making this change my ManagedServer starts but my Enterprise Application named soa-infra doesnt start and when i checked the log to find out the error,this is what i came across:
B2B-50025: Repository error: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
at oracle.tip.b2b.init.Repository.initExchange(Repository.java:658)
at oracle.tip.b2b.init.Repository.initialize(Repository.java:764)
at oracle.tip.b2b.init.B2BServer.readRepository(B2BServer.java:509)
at oracle.tip.b2b.init.B2BServer.initialize(B2BServer.java:212)
at oracle.tip.b2b.engine.ThreadWorkExecutor.startB2B(ThreadWorkExecutor.java:345)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:203)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Error -: B2B-51572: Error reading input stream.: java.io.IOException: Stream closed
Any suggestion would be of great help.
Thks in advance!!!Hey thks for the reply,
We were able to solve the problem by just restarting our database,
i got some reference from the below link(pls refer to this topic:Changing the IP Address of a Metadata Repository Installation):
[http://download.oracle.com/docs/cd/E12839_01/core.1111/e10105/host.htm#CHDHAEFE]
but m still confused do i have to restart my database server each time i change the DB server that m pointing to in my weblogic console and if yes can you pls help me understand what change happens when the database restarts that makes this work.
Another issue that m facing now is that after solving the above prb(by restarting the DB) m not able to deploy process's on to my server.
The Exception that appears in the log file is as follows:
[2011-02-08T13:03:33.220+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.compiler] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <BPEL1Processor::generateProcessClass> MerchantSales_BPELProcess.bpel(line 228): invalid query[[
query "/EmailPayload/ns3:FromAccountName" is invalid, because java.lang.IllegalArgumentException: null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService [Cause=null schema location for ns=http://xmlns.oracle.com/ias/pcbpel/NotificationService]
Check the XML schema and make sure your query string is valid
[2011-02-08T13:03:33.448+05:30] [soa_server1] [ERROR] [] [oracle.soa.bpel.engine.deployment] [tid: [ACTIVE].ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000Is4C5SLBLA1LzuP5iW1DKEXf000d33,0] [APP: soa-infra] [dcid: d61ccdb1526887f2:678e40b9:12e040e4cba:-7ffd-000000000000290f] <CubeProcessLoader::create> [[
java.lang.Exception: BPEL compilation failed
at com.collaxa.cube.lang.compiler.BPEL1Processor.generateProcessClass(BPEL1Processor.java:529)
at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:495)
at com.collaxa.cube.lang.compiler.BPEL1Processor.loadProcess(BPEL1Processor.java:438)
at com.collaxa.cube.lang.compiler.BPEL1Processor.createCubeProcess(BPEL1Processor.java:396)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:61)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:112)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:238)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployComponent(DeploymentManager.java:182)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean._deployOrLoadComponent(CubeServerManagerBean.java:726)
at com.collaxa.cube.ejb.impl.CubeServerManagerBean.deployComponent(CubeServerManagerBean.java:114)
at com.collaxa.cube.ejb.impl.bpel.BPELServerManagerBean.deployComponent(BPELServerManagerBean.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
Changing useful life of assets during asset to asset transfer
Hi All,
We need to transfer some assets to new assets changing its useful life. Below is my scenario.
Old Asset "A" has an useful life of 5 years and depreciation start date is 01.01.2006. Where this asset would be fully depreciated by the end of year 2011. The depreciation runs have been completed for November 2009.
Before using transaction ABUMN, I created a new asset "B" in a different asset class with the exact details of the old asset ONLY changing the useful life to 3 Years. (even the dep start date is 01.01.2006 - same as the old asset)
In Tcode ABUMN, I entered the old asset, doc date as 30.11.2009, posting date as 30.11.2009 and asset value date as 30.11.2009. Transfer variant 4 is been used in this case. The transaction went through successfully. The main idea behind this process was to depreciate the entire new asset "B" by the end of 2009, which should be the case as if 01.01.2006 is the dep start date with useful life of 3 years.
But this is not happenning. The entire depreciation is not been shown under plannned values for DEC 2009. Only a small value is shown. I need this asset to be fully depreciated by 31.12.2009 in variably absorbing the enire balance depreciation for the month of Dec 2009.
Please help me resolve this asap or please suggest me a different way of doing this if I am not doing it the right way.
Thanks & Regards,
MaleeqHi Kishore,
I need to change the asset class as well and thats why I need to to do the asset to asset transfer.
Thanks,
Maleeq
Maybe you are looking for
-
Thumbnail/preview images are not showing in Facebook (Safari/Firefox/Chrome)
Hello I've never had this problem before in a year of having a new MBP. The MBP completely ran out of juice for days to the point of the clock resetting (whether this is an issue I don't know), although the MBP works totally fine and is now on full j
-
Is there a way to import movies to iTunes?
Is there a way to import movies that I already own to iTunes?
-
What are the steps in trying to locate a lost or stolen iphone?
What are the steps to locate a lost/stolen iphone?
-
Discoverer Desktop CLI /pt parameter
Hi, Does any have setup Discoverer Desktop CLI using /pt parameter which sets the printer. I'm using this: dis51usr.exe /pt c:\Posting.DIS sysa.pr05 "FX DocuCentre-III 2007 PCL 6" 515 /connect discoverer/discoverer@disdb /parameter from '15-APR-2013'
-
Apple app disabled after a hold was placed on a bogus 50 charge to card. Apple disabled the account. Sent email to support and received no response. What isg up with this?