Error while check database in DB13

Hi,
I have scheduled check database in DB13 , I am getting an error as, BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3./BEV2/ED970. There are lot of messages found after check database. I am also getting error in verify database in DB13. What could be problem? Please help me with your solutions.....
Regards,
Nageshwar

This condition checks to see whether there are tables or indices that do not have any statistics, although they should have them.
The OBJECT field is not specified for this condition.
This condition has no checking operands, threshold values and value units.
Run your DB stats every week

Similar Messages

  • Error while scheduling VerifyDB in DB13

    Hi,
    I am facing an error while scheduling VerifyDB through DB13 in my SAP ECC 6.0 system. This problem is occuring in the entire landscape(Dev, Quality & Prod) after i did an oracle upgrade from 10.1.0.4 to 10.2.0.2. The error is as below:
    BR1301W Error message from likeywlib:
    ===...could not load SSF library libsapsecu.so .
    BR1301W Error message from likeywlib: likey_init: Couldn't load SAPSECULIB ("libsapsecu.so") using function SsfSupInit (), rc = 10.
    BR1302E Initialization of license key library likeywlib failed, return code 1
    BR0602E No valid SAP license found - please contact SAP
    I also checked the note 912969 which gives the below solution:
    The error is corrected in BRSPACE 7.00 patch 10
    But the BRSPACE is already on a higher patchset (18). Patch 10 is already applied.
    Can somebody please guide me on this.
    Thanks & Regards,
    Smitha

    Hi Andreas,
       the error is exactly the same.
    The database is Oracle 10.2.0.2 and the backup is performed with a mix of BRtools and Legato.
    Any idea?
    Thanks
    Gianluca

  • Error while creating database in classic appln

    Hi All,
    I am getting this error while creating database in classic application.
    com.hyperion.planning.olap.EssbaseException: Failed to create database, error code [%s] (1013221).
    Can anyone please let me know why I am getting it?
    Thanks in advance

    Can you check for a more specific error code in the Application log? There can be various reasons for this:
    1. For data storage and binary installation, Essbase supports the use of any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS). A disk array mounted using NFS or CIFS is not supported.Use any disk array device mounted with a local file system interface (for example, NTFS, HPFS, JFS, VxFS, and UFS).
    2. Error occurs when deploy Planning application with double byte enabled. When the plan name is changed to English, deploy will be successful. This issue can be fixed by setting Correct Essbase ESSLANG system value.
    3. The Essbase User that creates the application and DB folders has default ACL rw-rw-rw which does not allow the essbase app to create files inside the folder.
    HTH-
    Jasmine.

  • Error while creating database manually

    hi guru's i am getting error while creating database manually
    my sql is SQL>create database lily
      logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
                group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
                group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
      character set          WE8ISO8859P1
      national character set utf8
      datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
                size 50M
                autoextend on
                next 10M maxsize unlimited
                extent management local
      sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
                size 10M
                autoextend on
                next 10M
                maxsize unlimited
      undo tablespace undo
                datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
                size 10M
      default temporary tablespace temp
                tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
                size 10M;and i am getting following error
    create database lily
    ERROR at line 1:
    ORA-01501: CREATE DATABASE failed
    ORA-00200: control file could not be created
    ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already exists
    code}
    Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    create database lily
      logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
              group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
                group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
      datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'  size 150M
    sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
      undo tablespace undo  datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'  size 10M
    default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
    remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
    ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
    Edited by: rajeysh on Jul 19, 2011 6:59 PM

  • Error while checking in and storing document in storage category

    Dear Consultants,
    When i am trying to save a document in storage category thru tcode cv02n, its giving me error:-
    Error while checking in and storing document "c:/desktop/content.doc",
    while there is no error in csadmin and OAC0 tcode repository is in running status
    even output of
    dbmcli db_enum
    OK
    SDB     /sapdb/SDB/db                     7.6.03.09       fast    running
    SDB     /sapdb/SDB/db                     7.6.03.09       quick   offline
    SDB     /sapdb/SDB/db                     7.6.03.09       slow    offline
    SDB     /sapdb/SDB/db                     7.6.03.09       test    offline
    URL "http://192.168.2.11:1090/ContentServer/ContentServer.dll?serverInfo"
    output :-
    serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-14";serverTime="10:01:44";startUpDate="2011-12-14";startUpTime="06:36:18";lastAccessDate="2011-12-14";lastAccessTime="09:57:59";
    contRep="ZCONT_TEST";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";driver="MaxDB";defaultDocProt="";
    contRep="ZDMS_C1";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="hpsebdev1";security="1";contRepDescription="Database storage documents";driver="MaxDB";
    Please Help regading the issue
    Regards
    Gagan Sharma
    Basis Consultant

    Hi,
    Please revisit your DMS configuration. May be something is missing out in the configuration.
    Additionally you can retry to chekin by changing the following parameter
    security = 0.
    Hope this is useful.
    Regards,
    Deepak Kori

  • ERROR WHILE INSTALLING DATABASE INSTANCE

    Hi All,
        I am getting an error while installing database instance in 4.7EE with Oracle 8i.The error is
    running sapstart.exe name=AS9 nr=00 SAPDIAHOST=astrum -wait
    SAPSTART finished successfully on astrum_AS9_00, but Dispatcher is not connected to MessageServer.
    sapparam(1c): No Profile used.
    PLEASE HELP ME....

    hi pavan,
    i believe that oracle 8i are no longer supported by SAP.
    By default, SAP R/3 4.7 EE should come with Oracle 9i.
    Check your installer again.
    ardhian
    http://sapbasis.wordpress.com

  • CAD Desktop - error while checking in and storing...

    Hello SAP gurus',
    We have one problem regarding the CAD Desktop functionality, and we believe that you could help us!
    We are doing some tests with CAD-SAP Integration, and when we try to check in document in CAD Desktop, we receive the following error: "Error while checking in and storing c:\...".
    Funny thing is that we can check in originals "manually" in SAP GUI when we open DIR, but when we try to check it in via CAD Desktop it is not possible.
    In some previous posts I have seen that "hosts" file should be maintained properly, but what bothers me is that we are not using real content server yet (we are still in a test phase and we are checking in documents directly to SAP database).
    Does anybody have some idea what could cause this problem?
    Thanks for help guys!
    Regards,
    Karlo

    Hi,
    For viewing the CAD files Content sever will support. The exact technical stuff I don't know.But as per the previous experience I am sure that if you install k-pro your purpose will get fulfilled. The content server feathures you can get and may know the reason.
    But once you install a separate content server instead of the current storage system, your problem will get resolved.
    Regards,
    Ravindra

  • Error while checking RSRV of Cube

    hi all, I am getting following error while checking RSRV (DataBase indexses) of one of the cube.
    ORACLE: The status of index /BIC/FZPS_C02~020 is INVALID
    Please suggest something on it.
    amit

    Amit,
    Delete the cube indexes from Performance Tab of the Manage of the cube manually and check again.
    REDDY

  • ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

    Hi ,
    Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
    I executed the catupgrd.sql successfully and recompiled invaild objects.
    After that i tried to startup the database,but am getting the error:
    sql>startup
    oracle instance started
    database mounted
    ORA-01092 : Oracle instance terminated. Disconnection forced
    I checked alert log file.
    I am getting the following errors
    Errors in file /u01/......./udump/VIS_ora/7179.trc
    ORA-00604: error occurred at recursive SQL level 1
    ORA-00607: internal error occurred while making change to a datablock
    ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
    Error 604 happened during database open . Shutting down database
    instance terminated by USER pid =7179
    ORA-01092 error Signaled during alter database open
    Is there any block corruption? could u please share the solution for these errors?

    Hi;
    You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
    Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
    Regard
    Helios

  • Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

    Team,
    I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
    Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
    On Google search, i found below article which is best matching for this error
    http://support.microsoft.com/kb/324321
    I have follows each step of troubleshooting. But still the issue persists.
    Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
    Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
    /*  SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
    But there was only one row returned with create date of today's.
    Error while Assigning database level role (db_datareader) to SQL login (Domain Account) 
    Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
    Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
    Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
    I tried other ways also.
    A. Creating login and providing permission in one go only = User account is not created
    B. Instead of GUI, use query to create login and provide required permission = Same error.
    Does anybody has faced any such situation
    Chetan

    See the below output
    srvid
    sid
    xstatus
    xdate1
    xdate2
    name
    password
    dbid
    language
    isrpcinmap
    ishqoutmap
    selfoutmap
    NULL
    0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
    14
    20:25.9
    57:33.4
    UKBAA\LHRAPPMuttavarapuS
    NULL
    1
    us_english
    0
    0
    0
    Chetan

  • Error while checking in and storing

    Dear All
    I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
    Error while checking in and storing
    Message no. 26253
    What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
    Regards
    chandra

    Dear Chandra,
    please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
    Best regards,
    Christoph

  • Error while checking in a document: Unable to execute service

    Hi,
    I am using oracle UCM 11g. When i am checking in a document, i am getting error as "Unable to execute service CHECKIN_NEW_SUB and function validateCheckinData."
    In stacktrace found this is caused by:
    "Unable to find query or idc data source with 'DdeletedRows'. "
    How to resolve this?
    Thanks in advance

    Please refer to this thread ...may be u get ur answer out of it...........................
    Error while checking in and storing: C:\ ..... (Message no. 26253)
    regards,
    Tushar Dave

  • Error While Checking In & Storing

    Hi Guru's
    There are some documents which  are stored in our legacy system.We are trying to transfer documents from legacy to ECC6.0 through java connector.
    In java program we have done the coding by calling the function module BAPI_DOCUMENT_CREATE2.When we run the java program we are getting the error as Error while checking in and storing although we have defined the storage category
    While if we run the same java program by defining the storage category as SAP-System, documents are getting uploaded in 4.6 system and we are unable to find out  the Storage category SAP-SYSTEM in 4.6 system
    Kindly let me know how to resolve this issue or is there any way to transfer documents from legacy to ECC 6.0
    Regards
    Bhanu

    Hi Bhanu
    Is it error No 26253 correct me if I am wrong.
    If this is the error the check with basis administrator. Log space must be full or content server must be down due to some reasons.
    With Warm reagards
    Mangesh Pande

  • Error while checking in and storing: C:\Documents and setting*

    hI,
    I hace install the content server and i made content repository also.
    everything I made on development server, and the original application file is getting check in also.
    now when I tried to check in it in test sever, it giving me error like  Error while checking in and storing: C:\Documents and setting
    I transported all request like content repository and all to  test server from development server.
    regards,
    nitin

    Hi, Nithin,
    Check this also in development
    In your local machine Goto
    C:\windows\system32\drivers\etc
    There will be file called "hosts"
    in that file plz specify the IP of the content server.
    Eg;
    <IP address> <Content server name>
    102.210.23.186 My Content server
    Save the file.
    Restart the machine and then try check-in the file in content server.
    Regards,
    Ben

  • Error while checking in and storing: C:\Documents and Settings

    Hi,
    i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
    geeting error like "Error while checking in and storing: C:\Document and Settings.."
    please suggest me how to solve this problem.
    thx in advance...
    Karthik.

    Hi Karthik,
    There may be several factors contributing to this error.Some of these maybe:
    -Storage category defined improperly/missing
    -HTTP/FTP destination missing
    -Incomplete Workstation application definition
    -Incomplete Authorization
    Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
    Regards,
    Pradeepkumar Haragoldavar

Maybe you are looking for

  • Why cant i delete songs off my iphone?

    so all i want to do is delete JUST ONE BAND off of my iphone to make room for other things.. the band is already deleted out of my itunes library. the files, themselves, have been thrown in my trash and deleted permanently. BUT, the band is still on

  • Syncing Skype: How does it work?

    Hey guys, I'm running Skype on my Mac, but I'm about to install Skype on my Windows 8 PC. Before I login to my Skype account on my Windows 8 PC I just wanted to know where my 'Favorite Contacts' and 'Renamed Contacts' are located. If I login on my Wi

  • Settings for SAP Portal start page from BEx Query Designer

    Hi! In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer. When I push "execute" button within BEx Query Designer a wrong page will be shown in browser. I changed the settings in table RSPOR_T_PORTAL, but still get

  • Urgent Help in Networking

    Dear Sir, I've written an encryption algorithm.My problem is i 've to encrypt a file using the algorithm above at one computer.The receiver in another computer should get this file and decrypt it at another computer.I have written both encryption and

  • MIrrorlink anytime ... soon?

    I have a new car that offers Chevy's/GM's Intellilink, compatible with Mirrorlink. Any chance to get a native IL/ML implementation on BBOS 10 the very next time? Solved! Go to Solution.