Error while check-in CAF DC on NWDI "No prefix found"
Hi experts!
I receive The following error when I try to Check-in a CAF DC on NWDS.
FAILED: No prefix found for development component "mycompany/name/caf/dictionary"
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
I already tried the solutions described on this threads:
Error while Check-in DC's on NWDI: No Prefix found for DC
Problem With Checkin
CAF check-in to NWDI error
No prefix found for development component
None solved to me.
After I receive that error message I did:
- Reserved the name prefix "mycompany/name/caf" on SLD on category "Development Component Name" with purpouse "Used everywhere"
- Enabled the option "Enable this SLD as Name Server for NWDI"
- Registered the NWDI on SLD as "Landscape" with type "NWDI Systems" and two systems, one with type CMS and another with type SLD.
- Stop/Start SLD
- Stop/Start NWDI
- Update CMS on NWDI.
The problem is still happening. The NWDI version is 7.1 SP4.
Any ideas?
Thanks Jan! It solved!
I have already created another workspace after all the tests just to be sure that the problem wasn´t on NWDS.
It solved to me when I removed the reservation on SLD and recreated.
Thank you so much!
Gabriela
Similar Messages
-
Error while Check-in DC's on NWDI: No Prefix found for DC
Hi,
I receive the following error when I try to check-in a CAF DC creation activity on the DTR.
FAILED: No prefix found for development component "vendorname/name_A/caf/dictionary".
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
No prefix found for development component "vendorname/name_A/caf/ejbmodule".
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
No prefix found for development component "vendorname/name_A/caf/ear".
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
No prefix found for development component "vendorname/name_A/caf/permissions".
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
No prefix found for development component "vendorname/name_A/caf/metadata".
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
Project "vendorname.name_A.caf": No prefix found for table file "XAP_COM_MOD_COMP_S".
Try the default table prefix "XAP", or contact your SLD administrators for appropriate DB object prefix (Restart IDE after reconfiguring SLD).;
Project "vendorname.name_A.caf": No prefix found for table file "XAP_COM_MOD_COMP_T".
Try the default table prefix "XAP", or contact your SLD administrators for appropriate DB object prefix (Restart IDE after reconfiguring SLD).
In NWDS If I create a new DC the name prefix field is disabled.
On the SLD I have created the name prefix --> "vendorname/name_A" and restarted the SLD.
I am using NWDS 7.1 SP05.
Do I miss any configuration steps?
Thanks,
Regards,
YasarHi,
The issue is solved.
The name server for the NWDI System was not configured on the SLD under Technical Landscapes. After defining the NWDI System and configuring the name server, I restarted the SLD Server and updated the CMS.
Now Check - In and Check -Out of CAF DC's are working fine. If I define a new DC the name prefix is also editable and NWDS provides me my defined name prefixes in the name prefix combobox.
Regards,
Yasar -
Error while checking in and storing
Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandraDear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph -
Error while checking in a document: Unable to execute service
Hi,
I am using oracle UCM 11g. When i am checking in a document, i am getting error as "Unable to execute service CHECKIN_NEW_SUB and function validateCheckinData."
In stacktrace found this is caused by:
"Unable to find query or idc data source with 'DdeletedRows'. "
How to resolve this?
Thanks in advancePlease refer to this thread ...may be u get ur answer out of it...........................
Error while checking in and storing: C:\ ..... (Message no. 26253)
regards,
Tushar Dave -
Error While Checking In & Storing
Hi Guru's
There are some documents which are stored in our legacy system.We are trying to transfer documents from legacy to ECC6.0 through java connector.
In java program we have done the coding by calling the function module BAPI_DOCUMENT_CREATE2.When we run the java program we are getting the error as Error while checking in and storing although we have defined the storage category
While if we run the same java program by defining the storage category as SAP-System, documents are getting uploaded in 4.6 system and we are unable to find out the Storage category SAP-SYSTEM in 4.6 system
Kindly let me know how to resolve this issue or is there any way to transfer documents from legacy to ECC 6.0
Regards
BhanuHi Bhanu
Is it error No 26253 correct me if I am wrong.
If this is the error the check with basis administrator. Log space must be full or content server must be down due to some reasons.
With Warm reagards
Mangesh Pande -
Error while checking in and storing: C:\Documents and setting*
hI,
I hace install the content server and i made content repository also.
everything I made on development server, and the original application file is getting check in also.
now when I tried to check in it in test sever, it giving me error like Error while checking in and storing: C:\Documents and setting
I transported all request like content repository and all to test server from development server.
regards,
nitinHi, Nithin,
Check this also in development
In your local machine Goto
C:\windows\system32\drivers\etc
There will be file called "hosts"
in that file plz specify the IP of the content server.
Eg;
<IP address> <Content server name>
102.210.23.186 My Content server
Save the file.
Restart the machine and then try check-in the file in content server.
Regards,
Ben -
Error while checking in and storing document in storage category
Dear Consultants,
When i am trying to save a document in storage category thru tcode cv02n, its giving me error:-
Error while checking in and storing document "c:/desktop/content.doc",
while there is no error in csadmin and OAC0 tcode repository is in running status
even output of
dbmcli db_enum
OK
SDB /sapdb/SDB/db 7.6.03.09 fast running
SDB /sapdb/SDB/db 7.6.03.09 quick offline
SDB /sapdb/SDB/db 7.6.03.09 slow offline
SDB /sapdb/SDB/db 7.6.03.09 test offline
URL "http://192.168.2.11:1090/ContentServer/ContentServer.dll?serverInfo"
output :-
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-14";serverTime="10:01:44";startUpDate="2011-12-14";startUpTime="06:36:18";lastAccessDate="2011-12-14";lastAccessTime="09:57:59";
contRep="ZCONT_TEST";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";driver="MaxDB";defaultDocProt="";
contRep="ZDMS_C1";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="hpsebdev1";security="1";contRepDescription="Database storage documents";driver="MaxDB";
Please Help regading the issue
Regards
Gagan Sharma
Basis ConsultantHi,
Please revisit your DMS configuration. May be something is missing out in the configuration.
Additionally you can retry to chekin by changing the following parameter
security = 0.
Hope this is useful.
Regards,
Deepak Kori -
Error while checking in and storing: C:\Documents and Settings
Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
I configured Content Repository, Content Category & Document Area in KPro.
I tried to test connection in OAC0, I am getting the message "Connection test for content repository XXXXXXXXXXXX was successful".
But when I tried to check in the docs in CV01N and while saving the DIR I am getting the error "Error while checking in and storing: C:\ ..... (Message no. 26253)".
Same time I can able to check in the docs to SAP DB.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Hello David,
I assume you’re using windows contentserver.
sounds like a problem with the parameter maxAllowedContentLength of ISS.
Default value would be 30 MB
Check the limit:
C:\windows\system32\inetsrv\appcmd list CONFIG -section:requestFiltering
Set limit to 4 GB:
c:\windows\system32\inetsrv\appcmd set config -section:requestFiltering -requestLimits.maxAllowedContentLength:4294967295
resatart ISS and try again.
Best Regards
Andreas -
Error while checking in and storing: C:\Documents and Settings\Administr
Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R KarthikeyanHi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar -
Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
Dear Friends,
I am trying to save the documnet in content server but getting the below error:
Error while checking in and storing: C:\Users\cbt.abap\Desktop\LOP.XLS
Message no. 26253
I hv checked CSADMIN certificate , is activated
In DC20 - i hv maintained data carrier type as PC for front end
and i hv all the authorizations, still I am getting this error
pl check and tell the steps to solve this issue.
regards,
Atul TulaskarHi Atul,
please see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26253-Reasonforthiserror which should be useful to find out more about possible reasons for this error message.
Best regards,
Christoph -
Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S AnandError Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
PLM Integration AutoCAD 4.0
In AutoCAD Mechanical while Check in Drawing using KPro through CAD View I am encountering an error : "Error while checking in and storing C:\.........."
ACADM Log:
Command: _qsave Using configuration "SaveAsDialog" for document creation for
Drawing2.dwg.
Starting SAPGUI ...
Assigning file "C:\SapWorkDir\AcadM\SUKAN-TEST-7_DRW_000.dwg" to document
SUKAN-TEST-7/DRW/000/00.
Reading titleblock data for SUKAN-TEST-7/DRW/000/00...
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
Command:
Command: _SAPCADDESKTOP2
Command: Working without change number.
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
Reading titleblock data for SUKAN-TEST-7/DRW/000/00...
Updating document info record SUKAN-TEST-7/DRW/000/00 ...
The same ACAD Drawing I am able to check in through SAP Transaction CV02N.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Sukan
Is the issue resolved.
Check in content repositories, just check if the repository which u tryin to Check In the document(CAD file) is giving u response..
i guess there must be some problem from server side.
just ask basis @ the same.
dont change config okk...
Niranjan -
Error while checking in and storing:Message no. 26253 - CV02N
Hi Friends
I have received the following error Error while checking in and storing:Message no. 26253 while check in of file in Content Server.
I have done all seeting such as Creation of content repository, Storage category.
Content server is also installed properly as per installation guide.
Is note SAP Note 1327343 applicable for me.
With Regards
Mangesh PandeChristoph Hopf
First thanks for the tip, my problem is that the Basis configured the server content in DMS because, will be used two servers.
I configured Data Carrier Sets / Sets date carrier type "server, front end".
Type (data carr.type) / Description / Path / CAD system / Online
80 / DMS Jundiai / Z_EMP_JD / 80 / X
I view an attached file in DMS normally, however when I make the check in Orig. the error occurs.
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 26729080"
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
" ;ODBC State 00000; Error Code 26729080"
An error occurred when calling module SCMS_DOC_CREATE_FILES
Message no. 1R579
Diagnosis
Exception number 6 occurred when function module SCMS_DOC_CREATE_FILES was called with document 00155D0216091ED1BE84D6471C796DB4.
Since ja thanks for the help
Márcio -
Error while checking in and storing.....Msg No 26253
Hi,
I am getting the Error while checking in and storing: C:\Users\abcd\Desktop\Hotel.docx
Message no. 26253 while checking in the document to the content server.
What may be the possible reasons from the configuration and basis side..please advice.
Regards,
MuzamilHI Muzamil,
we have faced same problem. And the solution is when you are using external content server . The transport is not done properly by request. Ask basis person to transport the repository properly then your problem will get resolved.
There is no setting from functional side for this. The system throws error 26353 when repository is not transported properly.
I hope this will resolve the query,
Regards,
Ravindra
Maybe you are looking for
-
How to compile and execute lex,yac,c and java programs
its the 3rd day on my New MacBook pro.. as i just migrated from windows to mac i love to work on this.. The main problem is i DON't know ....... how to compile and execute 1) lex and yac programs 2) c program 3) java program so please help me THIS i
-
LCD display problem- bright spot
Hi, I just bought my idea u310 online. By opening laptop for the first time, I noticed the screen frame is detached. the frame was not fixed in its own place. it was separated from lcd. I pushed corners so that it can get fit in the right place. it s
-
DO and Entitybean mapping(how to)
I have used a tool to generate entity beans and its related artifacts such as corresponding DAO and DAO implementation as described here http://www.hibernate.org/328.html I have also modelled my Domain Objects Nicely. Now am stuck in anemic coding. h
-
9iAS vs. Oracle 8i HTTP Server
Hi, Can anyone explain in some sentences main differences between 9iAS and Oracle 8i HTTP Server. The latter we have "for free" with the database and in many applications (e.g. PL/SQL + Web Toolkit) this seems to work quite well. What do we pay for w
-
Working very slow on internet. Yet without internet shows normal speed.
I am using Window 7. I have very serious problem with speed in firefox when connected with internet. It works very slow. When I tested without internet it was working normal. I have tried various anti-virus tools and adware removal softwares. I also