Error while checking in Document as attachement

Hi All
I am getting the following error when i am trying to check in documents as "add
attachement"
Error Deatils are as follows :
The service stack for this request is --EDIT_RENDITIONS (dID=12155)
intradoc.data.DataException: !syParameterNotFound,HttpWebRoot at
intradoc.data.DataBinder.getEx(DataBinder.java:1127) at
intradoc.data.DataBinder.getActiveValueSearchAll(DataBinder.java:908) at
ziprenditions.ZipRenditionsData.get(ZipRenditionsData.java:64) at
ziprenditions.ZipRenditionsData.getSystem(ZipRenditionsData.java:92) at
intradoc.data.PropParameters.getValue(PropParameters.java:107) at
intradoc.data.PropParameters.getSystem(PropParameters.java:90) at
intradoc.data.MapParameters.getValue(MapParameters.java:102) at
intradoc.data.MapParameters.getSystem(MapParameters.java:84) at
intradoc.data.MapParameters.getValue(MapParameters.java:102) at
intradoc.data.MapParameters.getSystem(MapParameters.java:84) at
intradoc.data.MapParameters.getValue(MapParameters.java:102) at
intradoc.data.MapParameters.getSystem(MapParameters.java:84) at
intradoc.data.MapParameters.getValue(MapParameters.java:102) at
intradoc.data.MapParameters.get(MapParameters.java:78) at
intradoc.filestore.filesystem.FileSystemUtils.evaluateComponent(FileSystemUtils.\
java:342) at
intradoc.filestore.filesystem.FileSystemUtils.evaluatePathEx(FileSystemUtils.jav\
a:244) at
intradoc.filestore.filesystem.FileSystemDescriptorImplementor.createDescriptor(F\
ileSystemDescriptorImplementor.java:102) at
intradoc.filestore.BaseFileStore.createDescriptor(BaseFileStore.java:300) at
intradoc.filestore.filesystem.FileSystemDescriptorImplementor.getClientURL(FileS\
ystemDescriptorImplementor.java:276) at
intradoc.filestore.BaseFileStore.getClientURL(BaseFileStore.java:339) at
intradoc.shared.DocumentPathBuilder.computeWebUrlDir(DocumentPathBuilder.java:31\
5) at
ziprenditions.ZipRenditionsHelper.locateZipRendition(ZipRenditionsHelper.java:39\
7) at
ziprenditions.ZipRenditionsHelper.findZipRendition(ZipRenditionsHelper.java:315)
at
ziprenditions.ZipRenditionsHandler.editRenditions(ZipRenditionsHandler.java:245)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.jav\
a:25) at java.lang.reflect.Method.invoke(Method.java:585) at
intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617) at
intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java\
:293) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79) at
intradoc.server.Service.doCodeEx(Service.java:490) at
intradoc.server.Service.doCode(Service.java:472) at
intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.jav\
a:1360) at intradoc.server.Service.doAction(Service.java:452) at
intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.ja\
va:1201) at intradoc.server.Service.doActions(Service.java:447) at
intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplement\
or.java:1121) at intradoc.server.Service.executeActions(Service.java:433) at
intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.ja\
va:635) at intradoc.server.Service.doRequest(Service.java:1707) at
intradoc.server.ServiceManager.processCommand(ServiceManager.java:359) at
intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Thanks
Raj

HI Srinath
I added the variable in config.cfg
Getting the same Error :
The service stack for this request is --EDIT_RENDITIONS (dID=12155) intradoc.data.DataException: !syParameterNotFound,HttpWebRoot at intradoc.data.DataBinder.getEx(DataBinder.java:1139) at intradoc.data.DataBinder.getActiveValueSearchAll(DataBinder.java:920) at ziprenditions.ZipRenditionsData.get(ZipRenditionsData.java:64) at ziprenditions.ZipRenditionsData.getSystem(ZipRenditionsData.java:92) at intradoc.data.PropParameters.getValue(PropParameters.java:107) at intradoc.data.PropParameters.getSystem(PropParameters.java:90) at intradoc.data.MapParameters.getValue(MapParameters.java:102) at intradoc.data.MapParameters.getSystem(MapParameters.java:84) at intradoc.data.MapParameters.getValue(MapParameters.java:102) at intradoc.data.MapParameters.getSystem(MapParameters.java:84) at intradoc.data.MapParameters.getValue(MapParameters.java:102) at intradoc.data.MapParameters.getSystem(MapParameters.java:84) at intradoc.data.MapParameters.getValue(MapParameters.java:102) at intradoc.data.MapParameters.get(MapParameters.java:78) at intradoc.filestore.filesystem.FileSystemUtils.evaluateComponent(FileSystemUtils.java:342) at intradoc.filestore.filesystem.FileSystemUtils.evaluatePathEx(FileSystemUtils.java:244) at intradoc.filestore.filesystem.FileSystemDescriptorImplementor.createDescriptor(FileSystemDescriptorImplementor.java:102) at intradoc.filestore.BaseFileStore.createDescriptor(BaseFileStore.java:300) at intradoc.filestore.filesystem.FileSystemDescriptorImplementor.getClientURL(FileSystemDescriptorImplementor.java:276) at intradoc.filestore.BaseFileStore.getClientURL(BaseFileStore.java:339) at intradoc.shared.DocumentPathBuilder.computeWebUrlDir(DocumentPathBuilder.java:315) at ziprenditions.ZipRenditionsHelper.locateZipRendition(ZipRenditionsHelper.java:397) at ziprenditions.ZipRenditionsHelper.findZipRendition(ZipRenditionsHelper.java:315) at ziprenditions.ZipRenditionsHandler.editRenditions(ZipRenditionsHandler.java:245) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79) at intradoc.server.Service.doCodeEx(Service.java:490) at intradoc.server.Service.doCode(Service.java:472) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360) at intradoc.server.Service.doAction(Service.java:452) at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201) at intradoc.server.Service.doActions(Service.java:447) at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121) at intradoc.server.Service.executeActions(Service.java:433) at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635) at intradoc.server.Service.doRequest(Service.java:1707) at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359) at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)

Similar Messages

Error while checking in document using CV01/02N

While trying to check in a document I get an error saying:
Error while checking in and storing: C:\Documents
and Settings\sarita\Desktop\9011_SND_.
This is while trying to check in from my desktop. The content server and the repository have been defined , the connection established and the certificate has been sent as well. I am not sure what maybe missing .Please help.

Please refer to this thread ...may be u get ur answer out of it...........................
Error while checking in and storing: C:\ ..... (Message no. 26253)
regards,
Tushar Dave

Error while checking-in Document using PLMWUI

Hi All,
When we try to check-in an original file from PLM WUI to DMS_C1-ST it is not allowing to save.. An error is displayed as "Security list does not exist "
We can check-in the document in R3, but the same is not wrking from PLM WUI..
Any idea why this is happening..? User has all roles related to SAP_PLMWUI
Regards,
Aby
Edited by: Aby Thomas on May 4, 2010 11:52 AM
Edited by: Aby Thomas on May 4, 2010 11:59 AM

Hi Marcus,
We are accessing the Document through Netwear portal using PLM WUI..
Parameter vaues I have mentioend iis n the whitelist setup in spro-sap netweaver-application server-webdynpro abap-set up whitelist
Inside that for each application we need to define parameter vaues, I am not sure what is the value I should give there..
The error says - Incorrect parameter vlaues while trying to display the document.. Its opening using the "Copy to " option but not from "Display" option in PLM WUI..
Hope I am clear..
Regards,
Aby

Error while checking in and storing: C:\Documents and Settings

Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.

Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar

Error while checking in a document: Unable to execute service

Hi,
I am using oracle UCM 11g. When i am checking in a document, i am getting error as "Unable to execute service CHECKIN_NEW_SUB and function validateCheckinData."
In stacktrace found this is caused by:
"Unable to find query or idc data source with 'DdeletedRows'. "
How to resolve this?
Thanks in advance

Please refer to this thread ...may be u get ur answer out of it...........................
Error while checking in and storing: C:\ ..... (Message no. 26253)
regards,
Tushar Dave

Error while checking in and storing: C:\Documents and setting*

hI,
I hace install the content server and i made content repository also.
everything I made on development server, and the original application file is getting check in also.
now when I tried to check in it in test sever, it giving me error like Error while checking in and storing: C:\Documents and setting
I transported all request like content repository and all to test server from development server.
regards,
nitin

Hi, Nithin,
Check this also in development
In your local machine Goto
C:\windows\system32\drivers\etc
There will be file called "hosts"
in that file plz specify the IP of the content server.
Eg;
<IP address> <Content server name>
102.210.23.186 My Content server
Save the file.
Restart the machine and then try check-in the file in content server.
Regards,
Ben

Error while checking in and storing document in storage category

Dear Consultants,
When i am trying to save a document in storage category thru tcode cv02n, its giving me error:-
Error while checking in and storing document "c:/desktop/content.doc",
while there is no error in csadmin and OAC0 tcode repository is in running status
even output of
dbmcli db_enum
OK
SDB     /sapdb/SDB/db                     7.6.03.09       fast    running
SDB     /sapdb/SDB/db                     7.6.03.09       quick   offline
SDB     /sapdb/SDB/db                     7.6.03.09       slow    offline
SDB     /sapdb/SDB/db                     7.6.03.09       test    offline
URL "http://192.168.2.11:1090/ContentServer/ContentServer.dll?serverInfo"
output :-
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-14";serverTime="10:01:44";startUpDate="2011-12-14";startUpTime="06:36:18";lastAccessDate="2011-12-14";lastAccessTime="09:57:59";
contRep="ZCONT_TEST";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";driver="MaxDB";defaultDocProt="";
contRep="ZDMS_C1";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="hpsebdev1";security="1";contRepDescription="Database storage documents";driver="MaxDB";
Please Help regading the issue
Regards
Gagan Sharma
Basis Consultant

Hi,
Please revisit your DMS configuration. May be something is missing out in the configuration.
Additionally you can retry to chekin by changing the following parameter
security = 0.
Hope this is useful.
Regards,
Deepak Kori

Error while checking in and storing: C:\Documents and Settings\Administr

Dear
Whille saving then document in dms , i am getting this error.....
Error message is : "Error while checking in and storing: C:\Documents and Settings\Administrator\My Documen...."
Message Number is 26253
R Karthikeyan

Hi all,
Similar kind of issue occurred in one of our webdynpro applications of SAP NetWeaver Portal-
The error message "Error while checking in and storing" was returned by the BAPI while trying to replace documents in the DMS Server via portal.
But the documents were getting stored in the back end by the use of standard T-Codes.
Later it was found that ABAP tables COMPONENTS & COMPONENT_DATA are inconsistent by looking into the HTTP trace file.
The HTTP patch "http.c#21" was being used in our server.
SAP suggested the below mentioned steps-
-->Download the most recent SAPHTTP version & install it.
-->Then delete the RFC connections SAPHTTP & SAPHTTPA through T-Code SM59
-->Regenerate them again with report RSHTTP05
They were carried out in our ECC server & the issue was resolved.
Please try them out if applicable in your case & let us know.
Thanks & Regards,
Shreyashri Kar

Error while checking in and storing: C:\Documents and Settings\user\Desktop

Hi all,
I'm getting the following Error while checking in original to Content Server
"Error while checking in and storing: C:\Documents and Settings\user\Desktop" Message 26253
OAC0, OACT, CSADMIN settings seems to be Ok .
Settings in DMS SPRO - in dc10, dc20(data carrier used PC)- everything fine
-Authorization issues are not there
Earlier checking in was possible with same settings, but now we are getting this error.
From my end i had test the RFC Connection (SAPFTP, SAPFTPA, SAPHTTP, SAPHTTPA) through SM59 and its test run was successful. So the possibilty of RFC Failure was ruled out.
I knew this problem was arised as there is some issue in Content Repository, but not able to trace it out.
If any one knew what to do in this case, then let me know.
Secondly, what are the things need to be checked to identify the content repository Checking in Issue.
Regards,
S Anand

Error Resolved.
I had only executed the below command
./dbmcli on SDB>db_execute SET LOG AUTO OVERWRITE ON
OK
seems like Log file was full. but now its working.
Thanks for your suggestion.
Regards
S Anand

Error while checking in and storing:Message no. 26253 - CV02N

Hi Friends
I have received the following error Error while checking in and storing:Message no. 26253 while check in of file in Content Server.
I have done all seeting such as Creation of content repository, Storage category.
Content server is also installed properly as per installation guide.
Is note SAP Note 1327343 applicable for me.
With Regards
Mangesh Pande

Christoph Hopf
First thanks for the tip, my problem is that the Basis configured the server content in DMS because, will be used two servers.
I configured Data Carrier Sets / Sets date carrier type "server, front end".
Type (data carr.type) / Description / Path / CAD system / Online
80 / DMS Jundiai / Z_EMP_JD / 80 / X
I view an attached file in DMS normally, however when I make the check in Orig. the error occurs.
HTTP error: 500 (Internal Server Error) " ;ODBC State 00000; Error Code 26729080"
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
" ;ODBC State 00000; Error Code 26729080"
An error occurred when calling module SCMS_DOC_CREATE_FILES
Message no. 1R579
Diagnosis
Exception number 6 occurred when function module SCMS_DOC_CREATE_FILES was called with document 00155D0216091ED1BE84D6471C796DB4.
Since ja thanks for the help
Márcio

Error While "Check in" of a orignal in DIR

Hi All,
I am trying to attach the orignals to DIR's in SAP. These orignals are PDF files and they are located on a external shared network drive. I need to run this process in background as i need to upload around 60000 orignals. I am able to upload the orignal successfully with FM "BAPI_DOCUMENT_LOAD" in background mode. But now when i try to checkin the uploaded orignals with FM "CVAPI_DOC_CHECKIN", it gives me an error saying "Error While checking in and storing XXXX". Any clues in this would be very helpful.
Regards
Charitha

Dear Charitha,
You have placed the file on the application server and trying to access via front end.The presence of file on the application server could be seen via AL11 however you cannot access the file directly from windows. This is the reason you get an error.
For checking in originals in background, API functions are much more flexible. Therefore please see also SAP note 504692, which includes several sample programs which could be helpful by checking in original files in background.
The document BAPIs always require a SAPGUI or an open RFC connection, because this channel is required to start the program SAPHTTP (or SAPFTP) on the client for the check-in. When the BAPI is used in background, the system doesn't know where to get the original files from.
Please note that the functionality you would like to realize is a very special one for which no standard solution exists. However, API-s are more flexible in some cases, i.e. CVAPI_DOC_CHECKIN with RFC destinations defined as SAPHTTPA/SAPFTPA could fulfill your requirements.
Further please see also the SAP note 796709 which contain also necessary information for this action too. In note 766277 you will find also a complete documentation of all available DMS BAPIs in the attachment. Unfortunately there is not standard solution for such scenarios like explained by you. Because a lot of environment variables could influence the BAPI behavior.
As additional information source kindly go through the note 729800. This will be of use for the current issue. If one uses BAPI's in via RFC-Lib, the ABAP-System makes a callback and starts the saphttp, sapftp via the open RFC channel. Therefore the RFC-Client has to allow this by calling RfcAllowStartProgram("sapftp;saphttp"). SAP note 144256 clearly describes the process.
Best regards,
Christoph

E26 253 Error while checking in and storing: \\sapserver\file.tif

Hi Experts,
I have now been fighting with this problem for a couple of weeks, and not been able to solve the issue.
My problem is to upload/check-in documents from the application serve in background.
I have a program to create DIF and attach files using BAPI_DOCUMENT_CREATE2.
When I'm running the program in foreground there is no problem.
When I run it in background I get the error message E26 254 Error while checking in and storing:
sapserver\file.tif
I have checked that the background process can see the document on the server and that is OK, so the problem must be within the actual storing of the document in DMS in the BAPI.
Any input to how I can solve this issue is appreciated.
Thanks in advance,
Thomas

Hi All,
We have now done some testing.
We got it to work on one of our systems but not on the other
I ran report RSCMST on both systems with the same backend directory. (A directory on the application server of the one that fails).
Running this report I get this result on the system that does not work.
HTTP interface test using function group SCMS_HTTP
21.06.2010 14:39:01
serverInfo:
contRep                   ZEBAN
contRepDescription        PR Attachments
serverStatus              running
serverVendor              Copyright SAP AG, All rights reserved 1998, 2001
serverVersion             6300
serverBuild               193
serverTime                123902
serverDate                21.06.2010
serverStatusDescription
pVersion                  0046
contRepStatus             data(89%) log(1%)
contRepStatusDescription
                                                  ok           58.848
create(1): new doc (frontend)                     ok          445.211
create(2): new doc (back end)
check_subrc: subrc     2 instead          0
check_subrc: HTTP error: 400 Bad Request
create(2): new doc (back end)                    error
docGet/create(1): copy document                   ok          105.684
info(1): existing doc                             ok           26.881
update(1): new comp                               ok           47.050
info(2): after update                             ok           30.458
delete(1): unknown doc                            ok           33.061
delete(2): unknown comp                           ok           31.669
delete(3): existing doc                           ok           53.330
delete(4): deleted doc                            ok           34.781
delete(5): existing doc                           ok           31.088
putCert:                                          ok           35.785
         1 errors
Any ideas to what could be wrong?
Thanks in advance.

Error while creating delivary document

Hi
i got error while creating delivary document
"Delevivary documents could not be created"
Thanks&regards
kishore kumar

Hi Kishore,
Please check the sales order is this relevent for the delivery or not.
Check the copy control settings between your sales document type and delivery document type in VTLA transaction.
Check the incompletion log for the sales order.
I hope it will help you,
Regards,
Murali.

Error while checking in and storing

Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandra

Dear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph

Getting error while uploading a document in a library

Hi,
I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
It reads:
The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
How to resolve this ? I have referred many articles on this one, but none helped.
Thanks for your response in advance.
Regards

Hi Prajk,
Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
If above cannot work, please check ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error while checking in Document as attachement

Similar Messages

Maybe you are looking for