Error while choosing BP In Mktng Doc

Hi
In address tab of vendor both ship to pay to are filled.but excise information is not filled.while making marketing doc and choosing vendor the error i receive is No matching record found " (CRD1)(ODBC-2028)Message 131-183
But if i do same thing in another company following same procedure.It doesnt happen.
Whats the problem?

hello,
i experience this before, i just did some modification on the address of my BP and let it Update the BP master data. this fixed my problem,
also try to check Note:903383 this may help you.
Regards
Fidel

Similar Messages

Error while choosing vendor in document

Hi
In address tab of vendor both ship to pay to are filled.but excise information is not filled.while making marketing doc and choosing vendor the error i receive is No matching record found " (CRD1)(ODBC-2028)[Message 131-183]

hello,
i experience this before, i just did some modification on the address of my BP and let it Update the BP master data. this fixed my problem,
also try to check Note:903383 this may help you.
Regards
Fidel

Error while activating WM Physical Inventory doc..........

Hi All,
While activating an WM physical inventory doc (LI02N) I am getting error as follows:
"Number of allowed bins exceeded after storage bin 01-01-01
Message no. L4063"
Warehouse in SU Managed & has Bin-Sectioning upto 3 -sections.
Kindly let me know if any more data is required.
Regards,
NVK

Hi,
I think it is because of the maxinum number of items limited for your warehouse in the SPRO setting LE -> Activities -> PI -> Define differences and document limits. Check the max number of bins/quants allowed per PI document for your warehouse.

Error while choose inbound operation in action

Dear all,
if I create an action in a SWC I am not able to choose an inbound or outbound interface. For function module or
IDOC the dialog is opening without problems, but for Operation I get following error message:
====================================================================
= Root Exception ===================================================
====================================================================
Thrown:
com.sap.aii.utilxi.swing.framework.FrameworkException: Internal problem occurred
     at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.init(ExceptionDialog.java:126)
     at com.sap.aii.utilxi.swing.toolkit.ExceptionDialog.<init>(ExceptionDialog.java:98)
     at com.sap.aii.utilxi.swing.toolkit.IBMessages$1.run(IBMessages.java:318)
     at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:84)
     at com.sap.aii.utilxi.misc.thread.ThreadPool.assureAWTEventQueueing(ThreadPool.java:67)
     at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:308)
     at com.sap.aii.utilxi.swing.toolkit.IBMessages.showException(IBMessages.java:298)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor$1.run(Guitilities.java:396)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:320)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 2
     at com.sap.aii.ibrep.gui.f4.composite.CompositeTableViewAccessor.mapAccessor2TreeModelParams(CompositeTableViewAccessor.java:418)
     at com.sap.aii.ibrep.gui.scenario.ps.PSInterfaceSearchHelp$PSCompositeViewAccessor.mapAccessor2TreeModelParams(PSInterfaceSearchHelp.java:103)
     at com.sap.aii.ibrep.gui.f4.composite.CompositeSelectionControl.initializeTree(CompositeSelectionControl.java:633)
     at com.sap.aii.ibrep.gui.f4.composite.CompositeSelectionControl.setUsedConditions(CompositeSelectionControl.java:554)
     at com.sap.aii.ibrep.gui.f4.SelectionControl.setUsedConditions(SelectionControl.java:99)
     at com.sap.aii.ib.gui.f4.AbstractSearchHelp.setUsedConditions(AbstractSearchHelp.java:134)
     at com.sap.aii.ib.gui.f4.BasicSearchHelpSettings.initializeSearchHelp(BasicSearchHelpSettings.java:99)
     at com.sap.aii.ib.gui.f4.AbstractSearchHelp.setSearchHelpSettings(AbstractSearchHelp.java:138)
     at com.sap.aii.ib.gui.table.TableValueListAction.executeF4Help(TableValueListAction.java:75)
     at com.sap.aii.ib.gui.shelp.ValueListAction.actionPerformed(ValueListAction.java:97)
     at com.sap.aii.utilxi.swing.framework.mtaction.MTActionGroup.actionPerformed(MTActionGroup.java:52)
     at com.sap.aii.utilxi.swing.framework.mtaction.IBToolButton.performDefaultAction(IBToolButton.java:430)
     at com.sap.aii.utilxi.swing.framework.mtaction.IBToolButton.access$600(IBToolButton.java:50)
     at com.sap.aii.utilxi.swing.framework.mtaction.IBToolButton$3.run(IBToolButton.java:341)
     ... 8 more
On another PC I can access the same system/SWC and I am able to create an action and select an interface of type
Operation. So the system seems to be allright. Does anyone know this error and can tell me how to fix it?
I just figured out, that it must have to do with my user. Another colleague could log on on my PC and is able to create
an action. So Java WebStart or other generic problems are not relevant. But I have all roles in ABAP like him.
I also created actions in this SWC some months ago.
Regards
Chris
Edited by: Christian Riekenberg on Jul 15, 2010 4:11 PM

Hi,
which Java version have you on this PC ?
because if version is too recent... then in PI we have bad behaviour like some buttons are no more available, and perhaps we have also your problem.
to know your Java version, open the windows configuration console, then choose "Java". In the openned application, in tab "Java" click on the second display button. In my case, I have a JRE 1.5....
If you have 1.6, it's not good, I suggest you to just deactive it in this same tool (there is a checkbox).
Regards.
Mickael

Error while attaching PDF to FI doc via SAP services

Hi,
I am calling SCMS_DOC_CREATE_FILES funtion module to attach PDF to FI doc via SAP services and SAP internally calling standard function 'HTTP_POST_FILESu2019 with RFC_DESTINATION u2018SAPHTTPAu2019 and returned error due to connection fail.
RFC DESTINATION SAPHTTPA checked and   its working fine.
call function 'HTTP_POST_FILES' destination rfc_destination
    EXPORTING
      uri                   = absolute_uri
      path                  = component_path
      proxy                 = proxy
      trace                 = http_trace
      prefix                = component_prefix
      user                  = user
      pwd                   = password
    IMPORTING
      status                = status_code
      stext                 = stext
      error                 = cerror
      etext                 = comp_err
    TABLES
      resp                  = response_entity_body
      resphead             = response_headers
      reqhead               = request_headers
      comp                  = components
      compx_255             = componentsx
    EXCEPTIONS
      system_failure        = 1 message msg
      communication_failure = 2 message msg.
     output:   Sy-subrc is 0 and status_code is '403'
response_entity_body internal table return the below error information:-
-     HTTP/1.1 403 Forbidden
-     Server: Apache-Coyote/1.1
-     X-ErrorDescription: Genuine channels operation exception: Can not connect to the remote host "gtcp://127.0.0.1:49008". System error message: No connection could be made because the target machine actively refused it 127.0.0.1:49008.
-     Content-Type: text/html;charset=utf-8                           Date: Tue, 08 Nov 2011 21:36:02 GMT
-     Connection: close
Please help i am not to able find the reason why i am getting status_code is '403' and RFC failed.
Thanks
Sireesha
Edited by: Sireesha_SAP on Nov 10, 2011 8:53 PM
Edited by: Sireesha_SAP on Nov 10, 2011 10:16 PM

Hi,
I would like to know what font type, you are using in the forms.
Ideally it should be HELVETICA .
If you are using any other font in your style/form,try changing it to HELVETICA & Test.
Also Check the OTF data at the call of gen. FM,before converting it to PDF.
Regds,
AS
Edited by: abheesawant on Oct 12, 2011 7:48 AM

Error while trying to print a doc

Hi,
One of our Hyperion Essbase user is facing the below issue.
Trying to print something in Word and cannot print because of this error message.
"Object has been deleted"
I saw this in one of the links "Object has been deleted" error message in Word 2010
But I am not clear on which are the registry entries which needs to be deleted. Can anyone please help on this?

The thread refers to registry entries for smart view, even after uninstalling smart view you will see that some registry entries are not removed so you need to remove those entries before installing smart view again...
while deleting anything from registry make sure you are not touching registry entries other than smart view...
Thanks

'Unknown Error' while exporting a document as '.DOC'

I'm using Pages '09 on a Mac Mini running OS-X Lion. I have a 66-page document, originally a .DOC file which I modified and am trying to convert back to a .DOC file. When I try to convert it I get a warning dialog which says: 'An Unknown Error Occurred'.
I searched these pages and found that a number of people reported this and managed to fix it by solving some sort of problem with fonts, but I could not understand what people said they did to fix it. So I made a duplicate of my document, removed the last 30 pages, tried to export, got the error. Removed the last 15 pages, etc. until I found the page which was causing the problem.
Doing this I found two problem pages. The first one had a style called 'Body Bullets' which was using Helvetica 10 point. I changed it to Arial 10 point, but it did not solve the problem. So I deleted the style and used a built-in style called 'Bullet' which I redefined to use Arial 11 point. That worked.
The next problem page had a small section in Arial 10-point. I changed it to use 'Body' style (which I had defined earlier to use Arial 11-point) and now the whole document can be successfully converted to .DOC without errors.
My question is can this be fixed or do I have to avoid using Helvetica/Arial 10-point fonts in my document?
Thanks.
Martin Barker.

Hi
Here I have no problem with these fonts :
For Doing this I found two problem pages I used Helvetica 10.
For The next problem page had I used Arial 10.
I was able to export without any kind of problem.
It would be a good idea to scan your fonts with FontBook.
Some may be corrupted or some may be conflicting.
Yvan KOENIG (VALLAURIS, France) mercredi 18 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Getting Runtime error while uploading Business document (in .DOC format) to project in Solution Manger under Gen. Documentation tab (SOLAR01) .

Hi there,
Below are the steps that I followed to upload the business doc.
S1: Uploading the business process related document file (.DOC) to the business process step under Gen. Documentation tab.
S2: Providing the title, docuemtnatation type and released status for uploading the new document.
S3: Selecting the .DOC file to be uploaded. As soon as I try to upload the document I am getting the run time error as shown in the attachment. It is showing the short description that function Module "IW_C_PH_CLASS_VSP_GET" not found. I followed the steps to resolve this issue mentioned in the description. But still I am getting the same dump again and again. Any help will be highly apperitiated.
Thanks and Regards,
Rutvik Upadhyay

Hi Rutvik,
Please check and implement notes:
1823986 - SYB: Improved Data Load ("ins_by_bulk")
1605169 - SYB: SAP BW7.02 Correction Collection
Thanks
Vikram

Why do I get a generic system error while choosing an icon while on safari

While shopping online, I select an item from the home page and get a generic system error message. How do I resolve this?

Hi Serdj,
you don't get a GPIB error, the error number has just 2 different explanations...
Well, you have two programs accessing the same file. One program just wants to make a copy, the other (LabView) is trying to write to the file. When copying a file that is written to you get inconsistent results! That's why one of both programs is complaining an error...
You can't have write and read access at the same time! (But you can have more than one read access at the same time...)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Error while choosing the "Company" attribute in Self Registration

hi all,
I've configured user self registration with the approval process. On clicking the "Company Search" button, i get an error " You are not authorized to perform this action. Contact your system administrator " instead of the list of companies that i had given during configuration.
The error occurs in EP 7 but it is working fine in EP 6.Can anybody please help me with the solution?
regards,
Srinath

You need to start the useradmin tool and make a new role (not a portal role!) that contains the action UME.SelfRegister_User. Now assign this role to the Everyone group...

Vf02 error while releasing a billing doc to accounting

Hello All,
I m getting the below mentioned error while releasing a billing doc for a accouting.
I have checked all the settings in vkoa , ob52 and many more and all are set properly, now m not able to track where actually the prob is.
error is: No account is specified in item 0000001004
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000001004" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000001004" of the FI/CO document.
Points wil be rewarded
Thanks,
SUnny

Hi,
Have you checked what is the determination account determination log ? You can do this by entering in VF02 and select from the menu Environment -> Account Determination Analisys -> Revenue Accounts.
In this log you can see what are posting keys determined from the pricing procedure that should be posted in the FI document and determine very easy in which step the account was not determined.
After that you can maintain the correct account in VKOA transaction.
BR,
Valentin

Error while releasing Billing doc to Accounting

Hi all
I am gettin the following error while releasing a Billing doc to FI-
Reconciliation account 240001 or short key 00 is not permitted
The Billing doc pertains to Export sales and the billing Doc type is Export Invoice. However the Customer Recon A/c is defined as 240000 which is for Domestic Sales. A/c 240001 stands for Export Sales. I am wondering why it is asking for the Export Sales Recon a/c. Does this has something to do with Alternative Recon A/c? Should I set an Alternative Recon A/c and check this? If yes, then should it be defined in SD or FI?
If any1 has come across this prob, plzz help me.
Regards

It is all Fi related, and should be defined by the Fi Consultant.
But by changing the sort key I think your error can be solved. But I don't exactly know your config settings to recommend any solution.
Regards
AK
Please reward if helpful

Error while generating ARE doc. Internal number .

Error while generating ARE doc. Internal number .
Message no. 4F238
while creating ARE1 ,whilke saving the system is giving a message.
please help.
points will be rewarded.

check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P

ERROR WHILE GENERATING ARE-1 doc internal number

Dear sir
while creating ARE-1 Doc following error getting
error while generating ARE 1 DOC internal number
message no : 4F238
I MAINTAIN ALL NO RANGE OBJECT ALSO THEN ALSO GETTING ERROR
Sl No
Object
Tocde
Module
After Closing the Year ;
Maintain the Number ranges for following number
range objects related to CIN for the New year
Excise/
Series Group
1
J_1IINTNUM
SNRO/SNUM
Internal Document number to be Generated
2
J_1IRG23A1
SNRO/SNUM
MM
RG23A PART1 number Range object
3
J_1IRG23A2
SNRO/SNUM
MM
RG23A PARTII number Range object
4
J_1IRG1
SNRO/SNUM
SD
RG1 Number range object
5
J_1IRG23C1
SNRO/SNUM
MM
RG23C Part1 Number Range Object
6
J_1IRG23C2
SNRO/SNUM
MM
RG23C PartII Number Range Object
7
J_1IPLA2
SNRO/SNUM
MM
PLA PartII number Range Object
8
J_1IINTPR2
SNRO/SNUM
SD
Despatch Serial number
9
J_1IEXCLOC
SNRO/SNUM
SD
DOMESTIC EXCISE INVOICE
10
J_1IDEPINV
SNRO/SNUM
SD
EXCISE INVOICE FOR PLANT STO
11
J_1IEXCEXP
SNRO/SNUM
SD
Export excise invoice number range
12
J_1I57FC
SNRO/SNUM
MM
57FC Number Range Object
13
J_1IARE1
SNRO/SNUM
SD
ARE1 Series Group
14
J_1IARE3
SNRO/SNUM
SD
ARE3
15
J_1IBOND
SNRO/SNUM
SD
Bond Maintain (2007)
16
J_1ILIC
SNRO/SNUM
SD
Licence capture - CT3 maintain (2007)
THANKS & REGARD:
ROHIT NARSALE
9624886654

check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P

Why am I getting an error while accessing the service pop up when I try to convert a doc from pdf to a doc?

I keep getting a pop up of "error while trying to access the service" when I am trying to convert a pdf to a doc?

Hi snork8253,
Please let me know the exact workflow you are following when you get this error.
Are you trying to convert from within Reader or from Browser?
If from Reader then make sure you are signed in within Reader
Also try updating Reader to the latest v11.0.09 and check.
Regards,
Florence

Error while choosing BP In Mktng Doc

Similar Messages

Maybe you are looking for