Error while clearing Customer open items

Hi,
When I am trying to clear the Customer open items via F-30 I am getting following error -
+Profit center 9000/SEA001 does not exist for 08.04.2011
    Message no. KM026
Diagnosis
    The desired profit center SEA001 is not in the master data table for the specified date.
Procedure
    Check your entry.
    Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
    If necessary, create the desired profit center for the appropriate time
    frame.+
First of all SEA001 is not a Profit Center. It's a material. Correct PC is attached to this material SEA001 and I also checked the validity period of the PC and it's OK.
Can someone please advice how to nail down this issue?
Thanks,
Sanjay

Found the reason.
Actually there was a substitution to fill the PC from XREF3 for document splitting and SD module was passing the material in XREF3 hence the system was thowing the error.
Gaurav - thanks for your input. Your reply pointed out towards substitution.
Infact thanks everyone for the inputs.
Regards,
Sanjay

Similar Messages

Error while clearing the open items - Error Message GLT2152

Dear Forum,
While clearing the open items in the Customer Account with the Bank receipt we get the error message -
Account Determination 01001/missing Message No. GLT2152 The following error occured for the document you entered -
The online document splitting is active in the system.
The account determination does not exist yet and document cannot be posted.
Procedure - Either check the splitting rule or create the account determination key.
Would need your help as to how to resolve this and what to check.
Thanks!
Regards

HI Murli,
Thanks for the prompt response, I have checked in OB09, this refers to the Account Determination for OI Exchange Rate Differences and the entries maintained appear to be ok. What else could be the issue?
Regards

EBS posting to clear customer open items - Function not working?

Hello SAPers
I have an issue I just canu2019t seem to resolve! We are receiving MT940 statements and receive customer invoice reference details with field: 86 as follows:
:61:090910C1500,00FOSB1000270 //100909050      0        035315
:86:DEPOSIT
Remitter:1000270 MISSION AUSTRALIA   Ref:1200000017
Immediately following the BTC FOSB the bank quotes the customer number however I am not using this as standard SAP should identify the customer by document number within the note to payee field?
I am using a 2 step process in posting to the clearing account and customer. Config as follows:
Pst Type 1
40     Bank
50     Clearing
Pst type 2
40     Clearing
15     BLANK          DZ     3      15
I have also set up a string to look for the documents ^(12########)$. When we load the statement the first posting is successful however the second does not post to the customer or clear based on the invoice reference. I am using algorithm 020. The error that occurs is F5 102 Customer does not exist in company code xxxx. It actually does exist in the company code.
I have loaded the EBS to the buffer and simulated the search on BELNR and it picks up the document?
I am sure this is standard and a CMOD is not required on this type of functionality? What have I not done to allow posting to the customer based on document number or to post on account where it is not cleared?
Any assistance on this issue is appreciated? Thanks in advance.

Function Module for GL open Items
how to clear customer open items by another customer open item
Function Module for GL Open Items
Reward points..

Clearing customer open items

Hello!
Can anybody help to find a way how to clear customer open items when there is no reference number in use for customer. In electronic bank statemen there is only billing document number in TXT field. How to configure "Make Global Settings for Electronic Bank Statement" and "Define Search String for Electronic Bank Statement" for that purpose.
With all the best,
Merlin

Hello,
IMG => Financial Accounting => Bank Accounting => Business Transactions => Payment Transactions => Electronic Bank Statement => Make Global Settings for Electronic Bank Statement
Give your chart of Accounts
1. Create your account symbols
Create freely definable account symbols. Make sure that you are able to identify them when you are configuring in future steps.
2. Assigning Accounts to Account Symbols
Here you need to assign the account symbols to GL Accounts or you need to use masking logic. You must have designed your accounts in such a way that the end digits will work for posting the entries to FI. Account Modifier you use as + and use your local currency, if you do not have any foreign currency postings.
3. Create Posting Rules
Create freely definable posting rules.
4. Define Posting Rules (This is the most important configuration for your FI Postings / Clearings)
a) For all the payments you need to create the entries for posting area 1
b) For all the receipt you need to create the entries for posting area 1 and 2
c) Use the document type DZ in case if you want to clear the items. Use Posting type 8. If the invoice number is there in the reference field of bank statement, automatically the same will be selected by the system and cleared.
d) If you want just only entries to be posted use posting type 1.
e) If you want to clear the check, then use the posting type 4.
f) Configure according to the entries to be posted.
g) If you are going for clearing something the offsetting debit / offsetting credit (as the case may be) need not be given.
5. Create Transaction Type
Create freely definable Transaction Type
Select the transaction type and assign the external transactions to your posting rules.
For outgoing check use 13 as Interpretation Algorithm and 1 as the processing type.
Remaining all case use 1 (Standard algorithm) and 5 as the processing type.
Please also go through the below mentioned note in case if you are required to use further available interpretation algorithms or processing types.
6. Assign Bank Accounts to Transaction Types:
You need enter the Bank Key / Bank Account / Transaction type here.
You can get the the bank key and bank account details from table T012K (Go to SE16)
Further supplementary notes may be useful to you:
There are different programs to upload electronic bank statement.
FF.5 or FF_5.
I think your case Multicash format you are using.
You need have three files in FF.5 and two files in FF_5
You can prepare a Z program in order to truncate the electronic bank statement into two or three part files and save them on the application server.
1. Take all the external codes list from bank.
2. Take any available documentation from the Bank describing the relevance of the external codes.
3. Make sure that your Chart of Accounts (Bank Accounts) last digits logic is appropriate to meet the requirements.
4. Based on this decide the Account Symbols that are required to be created.
5. Make sure that the masking rules are configured properly.
6. Decide the posting rules that needs to be created.
7. Link up your external symbols provided by the bank with Posting rules and give proper algorithms for posting and clearing logic.
6. Concentrate on the posting areas to be posted while uploading the bank statement.
Further explanation would help you to understand the functionality when uploaded the electronic bank statement.
Main purpose of uploading the bank statement into SAP is to make your Bank Main Account and physical bank statement balance in sync.
You do not have any traditional Bank Reconciliation Statement (BRS) report in SAP.
SAP is normally you maintain bank main account and bank sub account. Whenever you make a payment through F-53 or F-58 or F110, the entry would be:
Vendor Account Dr
To Bank Sub Account
The ending digits of the sub-account would be important in configuring the masking rule. Based on this masking rule when you upload the bank statement the entry the system would pass is:
Bank Sub Account Dr
To Bank Main Account
It depends on the configuration, either the sub account will be cleared by the system automatically or you need to run F.13 to clear the sub accounts.
At the time of receipts, you have different accounting entries unlike payments. It needs to post to two posting areas. 1. GL Accounting 2. Sub-Ledger Accounting
The entries would system itself pass is:
Bank Main Account Dr
To Bank Sub Account
Bank Sub Account Dr
To Cutomer account.
Clearing logic mentioned for your posting rules and the alogrithm used for your external bank symbols will also play pivotal role in clearing the accounts.
Ideally you will use
FF67 / FF.5 / FF_5 for uploading manual or electronic bank statement
FEBA / FEBA_BANK_STATEMENT is used for furthe rprocessing.
GO THROUGH SAP NOTE 48854
Please go through SAP Note. 48854. You will get an idea regarding the functionality of the algorithms.
Though this note is in relevant to GB specific, you will find this very useful.
description follows below regarding the normal procedure for maintaining table T028G. Due to the different bank codes and posting rules, pre-Customizing is not possible at this point.
The following processing types are available - unless stated otherwise, you should use the interpretation algorithm: '000 - No interpretation' in each case.
1. '00': There is no processing. The entry line is ignored.
2. '01': A validation is made whether an entry exists for the transferred check number in the check table (PAYR). The check number and payment document number are transferred for further processing. Interpretation algorithm: outgoing check processing '011'-'013'; the update in the check file is via the interpretation algorithm.
3. '02': Transfer of the ending balance to the electronic bank statement
4. '03': Transfer of the opening balance to the electronic bank statement
5. '04': Clearing via the allocation number which is delivered with the bank statement. No interpretation algorithm.
6. '05': Clearing of BACS payments or BACS bank collection. The reference text field is first read to ascertain whether it involves payments initiated by users or bank collection via BACS. Providing it does involve a cash transaction initiated by the user, the payment document numbers concerned are determined via the reference number and transferred as a reference to further processing. Interpretation algorithm: '000 - No interpretation' or '019 - Reference number DME'.
Note
To differentiate between the two procedures in table T028G, you have to maintain two separate entries.
Example: the bank uses bank code '62' for cash receipts and for BACS bank collection.
Ext. Transaction +/- sign Posting rule Int. Algorithm Processing type 62 + GB62 001 5
62 SAPBACS + GB63 000 5
7. '06': Bank costs or interest revenues
Recommended interpretation algorithm: '000 - No interpretation'
8. '07': Total amount of cash disbursements
9. '08': Total amount of cash receipts
10. '09': Items not paid
Recommended interpretation algorithm: '000 - No interpretation'
Regards,
Ravi

Charge off difference whening clearing customer open item with bank receipt

Hi,
Our company users will use F-32 to clear customer open item with bank receipt, sometimes, our invoice is 100 RMB issue to customer, the customer finally pay 99.98, then in F-32, we use charge off difference to post 0.02 difference to a account.
The user then want to control this, saying for example, if the customer pay only 90, whening using charge off differnce, the system will pop up a error message.
Can this be done in SAP, or we need to use user exit, then which user exit?
Thanks.

Dear,
This is done through customer tolerance group using transaction OBA3. Here enter the maximum amount in Loss under the Permitted Payment Differences. you are able to hold tolerance for customer clearing.
Is this what you wanted?
Regards,
Chintan Joshi.

Function module to clear customer open items

Hi ,
I have a requirement in FI module to clear the customer open items through Function Modules. The standard functionality is done through the tcode f-28 / f-32.
Please let me know if there is any program or Function Module to clear the customer open items.(without using BDC).
Thanks in advance.

Function Module for GL open Items
how to clear customer open items by another customer open item
Function Module for GL Open Items
Reward points..

How to clear customer open items by another customer open item

Hi Guru's
I have a problem, we need to assign and clear the open items of one customer with another customer from same company code. is it possible?
for eg: I have a customer X whose Debit balance is USD1000 and Cusomer Y is having Credit balance is 1000. Customer Y is agreed to settle the amount to customer X.
since customers are not related , we dont maintain any relationship in SAP. how do we post and clear the open items?
please let me know the procedure.
regs
kumar

Hi,
When the moment you finish choose open item for 1st customer and then you have to press F7 (Charge off diff.) new screen comes then press F6 (Choose Open Items), then enter required data for 2nd customer (such as customer code, doc number, etc). You can post partially, and residually for this clearing posting.
Good luck.
-dwih-

Clear_document FM not working to clear customer open item.

Hi Experts,
1) I need to develop a report to clear the customer open items, the report has to display whether the Customer open items cleared or not?
     As we do f-30 transaction to clear documents.
   I have developed the report in this ways but its not clearing.
    a) First I have posted the document through   'BAPI_ACC_DOCUMENT_POST
    I have filled the document in the below way. The Bapi returning OBJ_KEY value also.
LOOP AT it_data INTO wa_data.
****Fill DOCUMENTHEADER
    wa_docmentheader-doc_type     = 'DA'.   "doc type
    wa_docmentheader-doc_date    = wa_data-bldat.   "doc. date
    wa_docmentheader-pstng_date = wa_data-budat.   "posting date
    wa_docmentheader-comp_code   = wa_data-bukrs.   "company code
    wa_docmentheader-ref_doc_no = wa_data-belnr.   "Reference
    wa_docmentheader-header_txt = wa_data-bktxt . "Header Text
    wa_docmentheader-username    = sy-uname.        "user name
****Fill ACCOUNTGL Table
    wa_gl-itemno_acc = l_no.
    wa_gl-gl_account = 2909509----" which i marked in the screen second red color(ACCount).
    wa_gl-alloc_nmbr = wa_data-xref2.
    APPEND wa_gl TO it_gl.
    CLEAR wa_gl.
****Fill ACCOUNTRECEIVABLE
    wa_receivable-itemno_acc = l_no + 1.
    wa_receivable-customer = wa_data-kunnr.
    wa_receivable-gl_account = wa_data-saknr.
    wa_receivable-alloc_nmbr = wa_data-xref2.
    APPEND wa_receivable TO it_receivable.
    CLEAR wa_receivable.
****Fill CURRENCYAMOUNT
    wa_currencyamount-itemno_acc = l_no.
    wa_currencyamount-currency = wa_data-waers.
    wa_currencyamount-amt_doccur = wa_data-dmbtr.
    APPEND wa_currencyamount TO it_currencyamount.
    CLEAR wa_currencyamount.
    wa_currencyamount-itemno_acc = l_no + 1.
    wa_currencyamount-currency = wa_data-waers.
    wa_currencyamount-amt_doccur = wa_data-dmbtr.
    wa_currencyamount-amt_doccur = wa_currencyamount-amt_doccur * -1.
    APPEND wa_currencyamount TO it_currencyamount.
    CLEAR wa_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader
= wa_docmentheader
IMPORTING
OBJ_TYPE
=
obj_key
= lv_obj_key
OBJ_SYS
=
TABLES
accountgl
= it_gl
accountreceivable = it_receivable
ACCOUNTPAYABLE
=
ACCOUNTTAX
=
currencyamount
= it_currencyamount
return
= it_return.
EXTENSION2
=
endloop.
2) After posting the document am using Clear_document to clear the document
   am filling the Clear_Document in the below way.
1. a)get belnr, bukrs, gjahr & buzei from bsid table for invoice and append to T_AUSZ1
    b)T_AUSZ1-BUKRS, 'A', OBJ_KEY+0(10)(which you get from BAPI_ACC_DOCUMENT_POST bapi), posting date, posting date year pass it to T_AUSZ2-BUKRS, T_AUSZ2-AKTIO, T_AUSZ2-AUGBL, T_AUSZ2-AUGDT & T_AUSZ2-AUGGJ and append it.
2. a)get BELNR, BUKRS, GJAHR, BLART & BUDAT from bkpf where awkey = OBJ_KEY(which you get from BAPI_ACC_DOCUMENT_POST bapi)
b) get belnr, bukrs, gjahr & buzei from bsid table where BELNR EQ bkpf-BELNR AND
                      ZUONR EQbkpf-BELNR AND
                      BLART EQ bkpf-BLART AND
                      GJAHR EQ bkpf-GJAHR AND
                      BUDAT EQ bkpf-BUDAT
and append to T_AUSZ1
c) T_AUSZ1-BUKRS, 'A', OBJ_KEY+0(10)(which you get from BAPI_ACC_DOCUMENT_POST bapi), posting date, posting date year pass it to T_AUSZ2-BUKRS, T_AUSZ2-AKTIO, T_AUSZ2-AUGBL, T_AUSZ2-AUGDT & T_AUSZ2-AUGGJ and append it.
delete duplicates from T_AUSZ2.
3) but am not able to clear the document using Clear_document Function Module
4)I am able to post the document through BAPI_ACC_DCUMENT_POST
5)Please tell me how to clear the document.

Hi Sunny,
Please see the following :
1. Down Payment Received (2500 INR.) F-29
2. Customer Invoice Posted (2500 INR.) FB70
3. Clear Down Payment (2500 INR) F-39
4. Now Run Automatic Clearing (F.13)
And then check the Customer line item report in FBL5N. It will clear both line items.
Hope this helps.
Kind Regards,
Prakash Kumar

Error 'Update Was Terminated' - While clearing an open item

Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad

>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID....   QAS
Client.......   100
User.....   MOHGYA323233
Transaction..   FB1K
Update key...   4A206A2D00E5001202000000C0A80A35
Generated....   04.06.2009, 11:24:59
Completed....   04.06.2009, 11:24:59
Error info...   F1 805: Clearing: Line item 001

Customer open item clearing based on the customer PO no in Sales order

Hi,
Is it possible to clear customer open item based on teh customer PO number eneterd in the sales order BSTKD.
Points will assigned for any useful answer.
Thanks
Vamsi

Hi this i spossible and cleared.Thanks

BAPI or FM or Class for Customer open items CLEAR (F-32)

Hi Everyone,
Is there any BAPI or FM to CLEAR customer open items (F-32).
Thanks,
NK

Hi,
For clearing open items you can use BAPI_ACC_DOCUMENT_POST.
but need to write extra code in BTE
check this function module SAMPLE_INTERFACE_RWBAPI01.
need to update below four fields of table accit.
REBZG (document no against u want to clear)
REBZJ (fiscal year)
REBZZ (line item)
REBZT
to update these field use BTE.
Thanks,
Avadhut.

Dissending customer open item clearance

Dear All ,
While doing customer open item clearance through F-32 , 1st I will select total collection line item, then subsequent customer debit line item. System should accept open item clearance dissenting posting date wise other error message will popup. So please give me advice for same
regards
purushottam

hi
thanx for reply .. we configured cash discount for customer base on Payment term . my question is while doing open item clearance payment againest customer debit clearing in order by posting date. in case end user wrongly select in between date system should stop running process .
regards
purushottam

Clear Customer Line Items

Experts,
Is there anyway we can clear customer open items ? - I am looking for a similar transaction like f-44 like we have for clearing vendor open line items.
All answers would be duly appreciated and rewarded with points.
Thanks,
Nandita

FB1D                 Clear Customer
FBA3                 Clear Customer Down Payment
F-32                 Clear Customer
F-39                 Clear Customer Down Payment
VVR

EBS Customer open items automatic clearing within tolerances

Hi Experts,
We have already implemented Elecronic Bank Statements automatic uploading functionality. As part of this process, customer open items need to be cleared automatically.
As per the standard process, SAP will be able to clear off the open items ONLY if the collection amount (reflected in MT940) is exactly equal to the invoice amount (reflected in the open item). But general practical situation is that customers may under / over pay. For example, if the customer invoice is for USD 100,005 the actual payment from the customer could be for USD 100,000. In this case, it is normal business practice that open item will be cleared off rather than keeping balance USD 5 in ledger and chasing the customer.
So tolerances are already set up both at GL account level (Trans OBA4) and customer level (Trans OBA3) with blank tolerance group with permitted payment difference of USD 15. And no tolerance group is assigned to the customer master. Also account determination is maintained for the differences with nil reason code.
Inspite of all these settings, I am getting an error message indicating that the difference is too large for clearing while trying to upload this bank statement. Here the difference is only USD 5.
My doubts are:
1. Does the standard EBS program RFEBKA00 considers the permitted payment difference tolerances set in transaction OBA4 and OBA3 ? I don't need to post the differences with reason code. That's why account determination is maintained with blank reason code as well.
2. SAP Note 124655 (Point No 3) says that entering reasons for differences is not possible in the standard system through EBS. Does that mean clearing of open items WITHOUT reason code is possible ?
3. SAP Note 549277 (Point No 5) says that even though Note 124655 specifies certain functionalities as not supported in standard system, they can be achieved by customer through user exits. Does that mean it is possible to code in the user exit saying that system should consider the payment difference tolerances for clearing off of the open items ?
Could you kindly let me know your experience with these questions. I will be very glad to hear from you. Thanks for your time.
Warm regards,
Sridhar

Hi Experts,
I got this resolved by using the enhancement FEB00001. If the field "Distribute by age" is activated through this enhancement, then system will be able to match the paid amount and the combination of open items for automatic clearing. If there is no exact match, then automatic clearing through FF.5 is not possible as indicated in SAP Note 124655.
There is no more necessity to use BAdI FIEB_CHANGE_BS_DATA. Complete relevant logic can be maintained directly in the enhancement itself.
Have a nice day.
Regards,
Sridhar

How to clear vendor open items with customer open items in APP?

Hi Experts,
Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'. Still problem is not solved, hence I am requesting you to help me in this regard.
Thank you very much,
Regards,
Ganesh.

Hi
In FBCJ after payment you have clear manually vendor balance in F-44.
If you want SPL GL in FBCJ then write a Substitution .
1. step 001 - Special G/L Substitution
2. Prerequisite - Transaction code = 'FBCJ'
3. Substitution posting key -- Exit (need help from abap) exit name
G/L Exit (need help from abap) exit name
Special G/L Ind Exit (need help from abap) exit name
you can't do this without ABAP help
Best Of Luck
Tanmoy

Error while clearing Customer open items

Similar Messages

Maybe you are looking for