Error while compiling model in Visual Composer 7.1.

Hi,
I am getting a error while compiling model in Visual Composer 7.1.
An exception occurred at the server while running the build process, reason: Extension with id com.sap.vc.runtimeproviders.null not found. For more details please refer to the log file.
Can any one please tell me what the error is?

Hello
This problem usually indicates the model Runtime provider is not set properly
Please goto configure pane and check the RT provider that is et for the model or any other model in the same DC
Also services usages require this property to be set accordingly
To make sure the services are set properly please look into the configuration pane when the respective service usage is selected (and check the same)
Please let me know if this helped or not
Guy

Similar Messages

Error while compiling Model in VC 7.1

Hi,
I am getting a error while compiling model in Visual Composer 7.1.
An exception occurred at the server while running the build process, reason: Extension with id com.sap.vc.runtimeproviders.null not found. For more details please refer to the log file.
Can any one please tell me what the error is?

Hi
The common reason for this kind of error is a misconfigured model or data service proxy
To verify this is not the case please follow these steps:
1. In the DC where you get the error open your models one by one and verify that the runtime provider that is configured is set properly (usually should be WebDynpro but could be Voice or Portal if this is the runtime that you are targeting your application to)
This configuration is accessible in the configure panel when your model is in focus
2. Do the same as described in bullet 1 on your data services' usages as well. Select the usage of the data service and check that the runtime provider is set properly
3. remove any unused service in your DC (this is a good practive regardless of the current problem. To view your data services in a certain DC open the "Manage Models Dialog". Select the "Data Services" entry in the filter dropdown on the top right corner. Drill down into the DC you are clearing and delete services you do not think they are in use. Please note that removing a service must be done carefully since you might delete services that could be in use by other models in the same DC or by dynamic entry list of a control in your model, etc.)
Please let me know if it helped
Guy

Error while making iview with visual composer

I am trying to make an iview usign visual composer.
In the document that i have for making the iview , it says that when you have the bapi list you need to drag and drop the bapi to the empty iview pane . When i do so it gives me the following error ...
"Portal request failed
(com/sap/mdi/ObjectFactory)"
What do i do ?
Would appreciate a prompt help!
thanks again for making me move ahead
I had a conversation with a parson on the forum named Venkat . I am posting the same for other people in the forum to understand what exactly is my problem and how much have we explored .
Regards
Deepak Singh
Hi Venkat ,
I tried to do so research on the problem and it is being talked about in a thread on the forum . They ask to refer to the sap note 765461 to resolve the mdi reference . In the note they ask you to refer the installation guide of the installed version of EP . I have EP 6.0 SP2 . The installation guide says the following ...
7.1.2 Adding References
To enable some of the features in the portal environment, add references to reference file.
To add a reference:
1. With a text editor, open the file:
Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
number>\cluster\state\services\file\work\managers\reference.txt
Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
cluster/state/services/file/work/managers/reference.txt
2. Look for the line:
reference service:eisconnector library:jco
3. After the line mentioned in previous step, add the following in a new line:
reference service:eisconnector library:com.sap.mdi
4. Save your changes and close the file.
5. Delete the file:
Windows: <installation drive>:\usr\sap\<SAP J2EE instance name>\j2ee\<instance
number>\cluster\state\services\file\work\managers.bin
Unix: /usr/sap/<SAP J2EE instance name>/j2ee/j2ee_<instance number>/
cluster/state/services/file/work/managers.bin
6. Restart the SAP J2EE Engine. See Starting the SAP J2EE Engine [Page 60].
7. Restart the SAP J2EE Engine again.
I did the same ....but now my server is not starting . By chance i didn't keep a bakup of the file which they asked me to delete .
Now what do i do ?
I think i am stuck up badly here .
EVERYBODY IN THE FORUM PLEASE HELP
I am not sure how a thing that is mentioned in the installation guide cannot work !
Regards
Deepak Singh
Deepak,
It is not that bad. By deleting you are recreating that managers.bin file during startup based on the reference.txt and library.txt (recollecting from my memory). This could also happen if there is a typo or some special characters in the reference.txt
I don't know what J2EE patch you are at, but after PL22 you can actually add the reference using the "add reference" command from the administrator console.
could you please send the error you are getting? To revert back the simplest thing is removing the line you have added and restart.
Hope this helps.
-Venkat Malempati
Note: Please reward points if your problem is solved or useful.
Venkat ,
I am using J2EE engine 6.20 SP2 .I tried to get the server started by the following two methods
1) I removed my entry in the reference.txt file and then start the engine by running go.bat from the required path .
2) I got the original file managers.bin which i deleted and then placed in the required path and restarted the server
Both the options didn't work .
I am not getting any error when i restart the server. When i run the batch file go.bat it starts the console and shows me the various managers loading . After it shows the Clustermanager loading , it stops and gets stuck .
Not sure what should i do now .Is reinstallation the only solution ?
Is there a solution from the administrator console ?
Regards
Deepak Singh
Deepak,
No you don't need to re-install. Try the following.
1. First start the state controller by runing go.bat in the following directory.
/usr/sap/xxx/j2ee/cluster/state/go.bat
You get the message waiting for cluster manager.
2. start the server in a different window
/usr/sap/xxx/j2ee/cluster/server/go.bat
You get the message waiting for cluster manager
3. Start the dispatcher
/usr/sap/xxx/j2ee/cluster/dispatcher/go.bat
Please let me the know the error messages.
You can chat with me between 10:00 - 11:00 PM US EST.
Regards
-Venkat Malempati

People ,
I tried to do what venkat suggested . Infact I had mailed him the snapshot of the screen when i start the state controller as he suggested . For other people in the forum this is what is happening . When i start the state controller it displays an error and then the window closes immediately . I have managed the screen shots somehow and in those i could find two messeges in the begining and the end which could be useful for debugging the problem ...they are
1) [DBMS]: ID3004:DB file header do not match exception .
com.inqmy.services.dbms.server.interfaces.DatabaseException: Error while opening database ...
2) ID000544: Error statrting service dbms. DBMS service not started properly due to: Errro while opening database
[Framework -> criticalShutdown] Service dbms startup error !
After the state controller window closes i run the server in a different window and i get a message waiting for the cluster manager as suggested . Now i start the dispatcher and i get the same messege there as well ie waiting for the cluster manager .
What is to be done now . Is this information sufficient to suggest me something ? Please let me know if you require any other information .
Regards
Deepak singh

Error while creating model classes, operation aborted in NWDS

Hi All,
When i select Adaptive rfc 2 model and then search for the RFC, when i select RFC and click on next i get an error while importing :
Error while creating model classes, operation aborted.
It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
Can any one help me out??
Regards,
Pradeep kumar
Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

Hai guys thanks for reply
Tushar,
I am using NWDS 7.2, ce7.2 server, ECC 6.0.
Amit,
I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
Deepak,
I am unable to create model in other projects also.
I have sufficient amount of memory in my drive.
I have imported the DC to other NWDS but it gives same error.
Thanks for all,
Regards,
Pradeep Kumar G
Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

Error while deploying model

Dear friends,
I am facing following error while deploying model. can anyone help me how to resolve this error?
Error in compiling Flex application: java.lang.InternalError: An error occurred because there is no graphics environment available. Please set the headless-server setting in the configuration file to true.
   at macromedia.graphics.images.LosslessImage.<init>(LosslessImage.java:34)
   at flex.compiler.ImageLoader.lossless(ImageLoader.java:135)
   at flex.compiler.ImageLoader.load(ImageLoader.java:70)
   at flex.compiler.reflect.CompositeResourceLoader.load(CompositeResourceLoader.java:63)
   at flex.compiler.reflect.Type.importResource(Type.java:625)
   at flex.compiler.reflect.Type.parseEmbedAttributes(Type.java:517)
   at flex.compiler.reflect.Type.parseProperties(Type.java:219)
   at flex.compiler.ASComponent.<init>(ASComponent.java:66)
   at flex.compiler.ASClassLoader.loadComponent(ASClassLoader.java:131)
   at flex.compiler.CachedComponentLoader.getComponent(CachedComponentLoader.java:197)
   at flex.compiler.CachedComponentLoader.loadDefinition(CachedComponentLoader.java:101)
   at flex.compiler.CachedComponentLoader.getDefinition(CachedComponentLoader.java:263)
   at flex.compiler.CompositeLoader.getDefinition(CompositeLoader.java:54)
   at flex.compiler.linker.Loader.getType(Loader.java:266)
   at flex.compiler.linker.Loader.findType(Loader.java:248)
   at flex.compiler.linker.Loader.findType(Loader.java:247)
   at flex.compiler.reflect.Property.getType(Property.java:74)
   at flex.compiler.parser.MxmlParser.parseAttrProperties(MxmlParser.java:3432)
   at flex.compiler.parser.MxmlParser.parseUIObject(MxmlParser.java:662)
   at flex.compiler.parser.MxmlParser.access$300(MxmlParser.java:85)
   at flex.compiler.parser.MxmlParser$UIObjectHandler.element(MxmlParser.java:800)
   at flex.compiler.parser.MxmlParser.startElement(MxmlParser.java:367)
   at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
   at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)
   at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
   at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
   at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
   at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
   at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
   at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
   at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
   at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
   at flex.compiler.parser.MxmlParser.parseDocument(MxmlParser.java:4363)
   at flex.compiler.MxmlLoader.parse(MxmlLoader.java:277)
   at flex.compiler.MxmlLoader.loadComponentType(MxmlLoader.java:178)
   at flex.compiler.MxmlLoader.loadComponent(MxmlLoader.java:204)
   at flex.compiler.CachedComponentLoader.getComponent(CachedComponentLoader.java:197)
   at flex.compiler.CachedComponentLoader.loadDefinition(CachedComponentLoader.java:101)
   at flex.compiler.CachedComponentLoader.getDefinition(CachedComponentLoader.java:263)
   at flex.compiler.CompositeLoader.getDefinition(CompositeLoader.java:54)
   at flex.compiler.linker.Loader.getType(Loader.java:266)
   at flex.compiler.linker.Loader.findType(Loader.java:248)
   at flex.compiler.CompilerPackageManager.loadType(CompilerPackageManager.java:629)
   at flex.compiler.MxmlCompiler.openDocument(MxmlCompiler.java:61)
   at flex.compiler.MxmlCompiler.compile(MxmlCompiler.java:234)
   at flex.tools.Mxmlc.main(Mxmlc.java:166)

Nirav,
Have you checked the IGS (Internet Graphics Services)?
Regards,
Gilson

Can we use custom RFC in creating models in Visual composer??

Dear Experts,
Can we use custom RFC in creating models in Visual composer??
If yes, kindly provide some documents or links which would guide me how to achieve it.
Warm Regards
Upendra Agrawal

Hi,
Yes,you can do it.
Configure the rfc and use like others Standard BAPI procedure.
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc/connectivity]
Regards,
Govindu

Getting a bad bind variable error while compiling a custom form in R12

Hi,
I am getting a bad bind variable error while compiling a custom form.
I tried setting the forms_path variable and I am still getting the error. Can anyone please suggest what can be done?
DECLARE
BEGIN
IF :parameter.p_line_ship_to = 'T'
THEN
IF :SYSTEM.cursor_item = 'LINE.SHIP_TO'
THEN
:parameter.lov_num_param1 := :line.ship_to_customer_id;
oe_lines.ship_to ('WHEN-VALIDATE-ITEM');
:parameter.lov_num_param1 := :line.ship_to_customer_id;
END IF;
:parameter.p_line_ship_to := 'F';
END IF;
END;
I am getting this error:
Bad bind variable 'parameter.p_line_ship_to'

The Parameter is not defined in the form.. But, this form is already been compiled and deployed.. I have to make some changes to the form and tried to compile it, when i am getting this error. Is it possible that the parameter would be defined in some other form or can this error be due to some other reasons?
Thanks in Advance.

Error while compiling the PO Item Category KFF

Kindly help me. I am new and learning Purchasing module and now stuck because of an error while compiling the PO Item Category KFF. This is because a segment is saved in the database incompletely.
Now the segment does not show in the Segments Summary form. But when I enter the same Number, I get the error APP-FND-00924: You chose a sement number that is used by another segment.
When I freeze and compile the structure with different segments, I get the error
APP-FND-00668: The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: FDFRKS could not find the structure definition for the flexfield specified by Application = &APPL, Code = MCAT and Structure number = 201 (APPID=401)
APP-FND-00738: Error detected when attempting to load value set on Context: &CONTEXT for Segment: &SEGMENT in Routine: FDFBKS
APP-FND-01564: ORACLE error 1403 in FDFAVS3
Cause: FDFAVS3 failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
Regards
Reem

Hi Sandeep
Sorry that I am bothering with basic questions, but I am not able to run any Select queries. It gives error Table or View does not exist. I can see the table from ALL_TABLES view, but I cannot Select.
I have logged in as oracle user. This is not Vision datbase. Can you let me know the default dba user and password or how to get the permission?
Regards
Reem

Error while compiling java file using J2SE 1.5.0

Dear Sir,
I'm getting the following error while compiling the java file.The code is also given.
package test;
public class TestRowSet {
public TestRowSet() {
"TestRowSet.java": cannot access java.lang.Object,bad class file: D:\Program Files\Java\jdk1.5.0\jre\lib\rt.jar\java\lang\Object.class,class file has wrong version 49.0, should be 48.0,Please remove or make sure it appears in the correct subdirectory of the classpath. at line 4, column 1
Please help me out.
--Suketu Naik.

But I'm compiling within "Borland JBuilder 9.0". I've
set the JDK path of the current project to point to
the path of JDK 1.5.0 . I've also tried to compile at
command prompt with "javac". I'm getting the same
error of "Undefinedclassloader" with long StatckTrace.
I don't know anything about JBuilder either. If you use the command prompt and enter the full path to the 1.5 javac.exe then that will prove whether the issue is using an older javac or not. For example "c:\j2sdk1.5.0_01\bin\javac HelloWorld.java"

Error While Compiling Jdbc Application

Hi,
I am getting an error while compiling a JDBC application ... as shon below...
please help me regardinmg this and also please specify how to include jar file ....
JdbcApp.java:5: package Oracle.jdbc.driver does not exist
DriverManager.registerDriver(new Oracle.jdbc.driver.OracleDriver());

Thanx for that!!!
but i am still getting the exception...
D:\Java>java JdbcApp
Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
ter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:334)
at oracle.jdbc.ttc7.TTC7Protocol.handleIOException(TTC7Protocol.java:366
8)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:353)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:371)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:551)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:351)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at JdbcApp.main(JdbcApp.java:7)
kindly solve this...

Error while compiling the composite through custom ant script

Hi,
I am getting the following error while compiling the composite through custom built ant scripts which are intern call the ant-sca-package.xml. And the composite is created by upgrading the 10g bpels. But the same composite is successfully compiling from Jdeveloper (11.1.1.4).
oad of wsdl "oramds:/soa/shared/workflow/NotificationService.wsdl" failed
oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/NotificationService.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:555)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:417)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:241)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:304)
     at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:388)
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
     at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
     at java.net.URL.openStream(URL.java:1010)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
     ... 9 more
Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
And in the following blog, its recommended to check for the adf-config.xml. But when upgrading the bpels from 10g to 11.1.1.4, I don't see any such file created by Jdeveloper.
http://orasoa.blogspot.com/2010/08/ant-and-mds-composite-compile-error.html
Not sure if I am missing some properties to add in by custom script while compiling.
Thanks
Sree
Edited by: Sree on Jul 4, 2011 7:25 AM

Hi Hussain,
Thanks for the reply.
Were you able to compile the form at the client side successfully?
1) Were you able to compile the form at the client side successfully?:
Ans: Yes, I was able to compile the form successfully at client side.
2) Are you logged in as applmgr user? Have you sourced the application env file before compiling the form?
Ans: No, I have not logged by applmgr user, i am using my own login. Yes I have sourced the application env file before compiling the form
3) What does "echo $FORMS_PATH" return?
Ans: echo $FORMS_PATH on server gives this path
/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource:/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource/stub
Can you please advise?
Thanks,

Exiting from sqlplus when there is any errors while compiling pl/sql progra

I am connecting to sqlplus from unix and I am executing a pl/sql script . Now if I get some error while compiling a procedure, package, function or any sql statement I want to exit sqlplus.
whenever sqlerror works only for sql statements but not for plsql
I dont want to query user_errors table and then throw some exception depending on the same .
Is there any command available or any easier way to solve this problem ?

Those errors we get only when there is conflict in same etc.
Now consider the example here
sample.sql
whenever sqlerror exit failure ;
declare
        s1 long;
begin
        s1 := 'create or replace procedure proc1 as '||
          'declare '||
          'begin '||
              'end; '||
          'end;';
        execute immediate s1;
end;
select 1 from dual;When I run the script
SQL> @sample.sql
ERROR:
ORA-24344: success with compilation error
ORA-06512: at line 9
Warning: PL/SQL compilation errors.
         1
         1Actually I want to get out before it executes select means once it throws error in pl/sql.

Error while compiling SOA composite using Jdeveloper

Hi,
I am getting below given error while compiling the SOA composite using Jdeveloper..
I m referring this PDF to develop a custom workflow.
http://st-curriculum.oracle.com/obe/fmw/oim/oim_11g/developing_oim_custom_approval_process_for_self_registration/developing_oim_custom_approval_process_for_self_registration.pdf
Error(45,34): Failed to compile bpel generated classes.
failure to compile the generated BPEL classes for BPEL process "ApprovalProcess" of composite "default/SelfRegistrationApproval!1.0"
The class path setting is incorrect.
Ensure that the class path is set correctly. If this happens on the server side, verify that the custom classes or jars which this BPEL process is depending on are deployed correctly. Also verify that the run time is using the same release/version.
Can u please let me know what am I missing here.
Regards,
Ab

Hi,
If u have any custom jars..make sure to add them at SCA-INF/lib directory.
Thanks,

Error while compiling form 6i

Hi All,
I am getting Memory fault error while compiling the form.
I tried with two commands.
I executed these commands from $AU_TOP/forms/US
At first I tried with
f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
and I got following error
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Memory fault
Secondly I tried with
f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid=apps/opopop123 Module_Type=FORM batch=yes Output_File=XXTEST.fmx
Now the error came was only 'Memory fault' without any other messages.
Please any one look into it.

Sure,
I used two commands both are not working.
First
f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
Second
f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid=apps/opopop123 Module_Type=FORM batch=yes Output_File=XXTEST.fmx
Both are not working
Error messages in first command
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Memory fault
Error message in second command
Memory fault
I ran this command from
$AU_TOP/forms/us --(/opt/egapmdev/ebmdappl/au/11.5.0/forms/US)
Looking forward from you.

JAXB Bindings - error while compiling Schema(s)

Hello, I want to create Java classes from a XML Schema by using JAXB Binding. However, when I do that a message error appears: "Error while compiling Schema" and then it says:
"C:\...\NetBeansProjects\myproject\build.xml:12: Problem: failed to create task or type import
Cause: The name is undefined.
Action: Check the spelling.
Action: Check that any custom tasks/types have been declared.
Action: Check that any <presetdef>/<macrodef> declarations have taken place."
Does anybody know what it's happening? It could be that there is a .jar missing?
Thank you very much

The document build.xml at line 12 says <import file="nbproject/build-impl.xml"/>. The file nbproject / build-impl.xml exists. If you want I could send it to you.You could post it here (the build-impl.xml, I mean).
I have a working example, we could compare.
I have included all the .jar you mentioned (excep the jaxb1-imp.jar).?
If you added this JAXB compiling target via NB's wizard, as you describe below, you shouldn't have to "include" whatever jars wich are already in the JDK. That is, if you're using JDK6 - JAXB was not (or not so much) included in the JDK prior to 1.6.
If the JDK is 1.5, I have no idea where you have to add these jars, possibly you're not add them in the correct classpath. Presumably Ant itself would need them in its classpath to be able to define the task.
And I have not touched anythingThey all say that... :o)
the only thing I did was to add other .jars (for other purposes).See?
Is it possible that you removed one of the important jars when doing back-and-forth tries?
But anyway I went back to remove this new .jars and the JAXB Binding still doesn't work .
Should I uninstall the IDE and re-install? I do not know what else to do ...Do you have any reason to believe you did corrupt the JDK or NetBeans's installation? For example, when you write about adding/removing the mentioned jars, did you do that somewhere in the JDK or NB installation?
Other than that, I don't see what reinstalling NB would do.
Without going to such extremes, have you tried simply to remove the JAXBBinding, and add it again in the NetBeans project, using the wizard?

Error while compiling model in Visual Composer 7.1.

Similar Messages

Maybe you are looking for