Error while configuring ADC (Additional Domain Controller)

Hello Experts,
I am configuring ADC (Additional Domain controller) in a member server which is in workgroup. while configuring ADC on that server, I got a window saying "additional information for this domain controller", where there were three options, i.e.
DNS server, Global Catalog, RODC (Read only Domain controller) and bydefault first two options(DNS & Global Catalog) were checked. I kept that setting and clicked on next. Now this is showing I need to give a static IP to my adapter, but I have already
given a static IP. when I unchecked the DNS button from that window it was not giving such error. Now my question is if I continue without checking the DNS, will it give me trouble in future. Please suggest. I am using MS2008 R2.
Swaprakash..

Ensure that you don't have another NIC in your server that is set to obtain IP address from DHCP. However, even if you proceed with this warning, you will probably not have any errors later, as long as you're sure that you have static IP assigned to your
internal NIC.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Similar Messages

What is the best practice and Microsoft best recommended procedure of placing "FSMO Roles on Primary Domain Controller (PDC) and Additional Domain Controller (ADC)"??

Hi,
I have Windows Server 2008 Enterprise and have
2 Domain Controllers in my Company:
Primary Domain Controller (PDC)
Additional Domain Controller (ADC)
My (PDC) was down due to Hardware failure, but somehow I got a chance to get it up and transferred
(5) FSMO Roles from (PDC) to (ADC).
Now my (PDC) is rectified and UP with same configurations and settings. (I did not install new OS or Domain Controller in existing PDC Server).
Finally I want it to move back the (FSMO Roles) from
(ADC) to (PDC) to get UP and operational my (PDC) as Primary.
(Before Disaster my PDC had 5 FSMO Roles).
Here I want to know the best practice and Microsoft best recommended procedure for the placement of “FSMO Roles both on (PDC) and (ADC)” ?
In case if Primary (DC) fails then automatically other Additional (DC) should take care without any problem in live environment.
Example like (FSMO Roles Distribution between both Servers) should be……. ???
Primary Domain Controller (PDC) Should contains:????
Schema Master
Domain Naming Master
Additional Domain Controller (ADC) Should contains:????
RID
PDC Emulator
Infrastructure Master
Please let me know the best practice and Microsoft best recommended procedure for the placement of “FSMO Roles.
I will be waiting for your valuable comments.
Regards,
Muhammad Daud

Here I want to know the best practice
and Microsoft best recommended procedure for the placement of “FSMO Roles both on (PDC) and (ADC)” ?
There is a good article I would like to share with you:http://oreilly.com/pub/a/windows/2004/06/15/fsmo.html
For me, I do not really see a need to have FSMO roles on multiple servers in your case. I would recommend making it simple and have a single DC holding all the FSMO roles.
In case if
Primary (DC) fails then automatically other Additional (DC) should take care without any problem in live environment.
No. This is not true. Each FSMO role is unique and if a DC fails, FSMO roles will not be automatically transferred.
There is two approaches that can be followed when an FSMO roles holder is down:
If the DC can be recovered quickly then I would recommend taking no action
If the DC will be down for a long time or cannot be recovered then I would recommend that you size FSMO roles and do a metadata cleanup
Attention! For (2) the old FSMO holder should never be up and online again if the FSMO roles were sized. Otherwise, your AD may be facing huge impacts and side effects.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

New Virtual Machine Wizard error: The server encountered an error while configuring hard disk on SEPmW8

on a backup DNS w2008 R2 server I tried create a new VM.
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
The server encountered an error while configuring hard disk on SEPmW8.
[Content]
You might not have permission to perform this task.
[Close]
when I tried creating v a new Vhd using default or custom folder, I get
[Window Title]
New Virtual Hard Disk Wizard
[Main Instruction]
The server encountered an error trying to create the virtual hard disk.
[Content]
You might not have permission to perform this task.
[Close]
But I verified the admin ID does have full access to the folders. furthermore it belongs administrators, domain Admins, enterprise admins,
What gives? what additional privilege I need to give to the login ID, I tried in vain adding to Virtual machines but got rejected. I also could not locate anything like virtual machines in the active directory,
Btw I finally managed to create a new VM wi/ VHD but still can't create new vhd
------------Platform info ---
the physical quad core Xenon server for backup dns also works as exchange server
has 12 GB RAM, 931 GB Raid 5 storage with 325 GB free.

These actions are not performed in the security context of the user. The Local System / computer account of the Hyper-V Server is what needs the access, not the user.
Also, many AV products will cause these problems if the exclusions are not set properly, as they block the hypervisor from doing its job.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Ports for Creating Additional Domain controller at my remote DRC site

Hello Expert,
I have my disaster recovery center (DRC) at a remote place, now I want to configure Additional domain controller (ADC) at my DRC, kindly share me the list of ports that I need to open at my firewall to configure this ADC. I am having Server 2008R2 environment.
Swaprakash..

Hi,
The blelow link has a detailed information of the required port should be open for AD communication
Active Directory Firewall Ports - Let's Try To Make This Simple
http://msmvps.com/blogs/acefekay/archive/2011/11/01/active-directory-firewall-ports-let-s-try-to-make-this-simple.aspx
http://technet.microsoft.com/en-us/library/dd772723(WS.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Error while Configuring environment parameters

Hi,
I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
Database- Oracle 11g R2
OS- Windows Server 2008
1. Environment Description
Environment Description: DEV01
2. Business Application Server Configuration
Business Server Host: 01HW342889
WebLogic Server Name: myserver
Business Server Application Name: SPLService
MPL Admin Port Number: 6502
MPL Automatic startup: false
3. Web Application Server Configuration
Web Server Host: 01HW342889
Web Server Port Number: 6500
WebLogic SSL Port Number: 6501
Web Context Root: ouaf
WebLogic JNDI User ID: systemjndi
WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
CcwlbnXl2b1kMnvE8DD0wfI1Y=)
WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Server Name: myserver
Web Server Application Name: SPLWeb
Application Admin User ID: appladmin
Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
cBz4cubUr2U5BbRl75SY2pP6Q=)
Expanded Directories: false
Application Viewer Module: true
4. Database Configuration
JDBC Name: oubi-jdbc
MPL Database User ID: SPLADMV2
MPL Database Password: ENC(mfG7quacTagw5qEvov
oaQIRpnogRvroY4NcXp6WZCZo=)
XAI Database User ID: SPLADMV2
XAI Database Password: ENC(tNfRJUthvYQR990TzW
314nXU+5jWBuYBDs5AgT5qG7g=)
Batch Database User ID: SPLADMV2
Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
kFDsgUIjDm5I6TJU5Suz0Wy/k=)
JDBC Database User ID: SPLADMV2
JDBC Database Password: {3DES}L43JfrbOrCtupkwm
4I/Adw==
Database Name: DEV1
Database Server: 01HW342889
Database Port: 1701
ONS Server Configuration:
Database Override Connection String:
Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
5. General Configuration Options
Batch RMI Port: 6509
Batch Mode: CLUSTERED
Coherence Cluster Name: OUBICLUSTER1
Coherence Cluster Address: 172.25.138.45
Coherence Cluster PORT: 6508
Coherence Cluster Mode: dev
Each item in the above list should be configured for a successful install.
Choose option (1,2,3,4,5, <P> Process, <X> Exit): P
--> Calculating additional variables ... done.
--> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
N.INI ... done.
Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
"ERROR - Detected while running install.plx."
Thks,
Mohan

This is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post

ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.

DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it.

Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]

Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself.

Error while creating a new Domain in BEA Weblogic

I am getting the below mentioned error while creating a new Domain in BEA Weblogic
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Saving the Domain Information...
Storing Domain Information...
String Substituting Domain Files...
Performing OS Specific Tasks...
Performing Post Domain Creation Tasks...
Domain Creation Failed!
Domain Location: C:\bea\user_projects\domains\base_domain_1
Reason: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
Exception:
java.lang.Exception: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:138)
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:170)
     at com.bea.plateng.domain.DomainGenerator.generate(DomainGenerator.java:435)
     at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)

Hi,
It look two ways either you dont have permission to write any new thing to that domain.properties file or might file is got corrupted.
Please check for the permission to that file.
Regards,
Kal.

Error while configuring work repository details in topology Manager

Hi,
Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
When i try to do so, am getting the below error while configuring the work repository details in topology manager.
“A work repository already exists for this connection.
Enter the repository password to declare it in your Master Repository”
I tried with both the new master and work repository password. But no luck.
Previous Master & work details:
Master: PCS_MASTER
Work:PCS_WORKREP
New Details
Master: PCS_MASTER_INT
Work:PCS_WORKREP_INT
Instance: PCBID
Am trying to create new master repository for PCS_MASTER_INT.

In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema..

Error while configuring talent profile for ESS

Dear Experts
I am having following error while configuring talent profile for ESS:
The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
Note
The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
Method: GET_NEXT_UIBBS of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
Method: RUN_EVENT_LOOP of program CL_FPM========================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Any suggestions on how to resolve the error?
Regards
Imran

Imran,
check this thread
http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
Thanks
Bala Duvvuri

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Error while Configuring Repository INS0017: Installation of the seeded data

I am getting error while configuring repository at 36%
Error:
Seeding Failed:
The warehouse builder workspace owner installation failed on user OWBSYS.
INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
xmlClasses.xml (Access is denied)
Operating system: Windows 2008 server 64 bit
Database: Oracle 11g Release 11.2.0.1.0 64 bit
Log file is not created in given location(Unified repos)

Hi David,
But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
Nawneet

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TR: Thread Package error while configuring

De : Joel RIANDEY
Date : mercredi 24 septembre 1997 12:42
A : Francois BOUCHARD
Objet : Thread Package error while configuring
I've got the following error while trying to assign a partition on a node during configuration.
SYSTEM ERROR: This component cannot be moved to this node. Node does not
support logical component
Class: qqsp_ErrorDescriptor
Error Time: Wed Sep 24 11:08:34
Exception occurred (locally) on partition "Forte_cl0_Client", (partitionId
= 172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1, taskId =
[172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1.54]) in application
"Forte_cl0", pid 183 on node JOELR in environment nt_dvpte.
USER ERROR: The node ORDAM-NT_DVPT is unable to support this partition
(LaunchCcsProject_cl0_Part1). This is because either all of the restricted
projects required by the partition have not been installed on the node or the
node does not have the external resource or thread package that the partition
uses. This partition requires the restricted project(s) <none> and the thread
package Forte.
Class: qqsp_UsageException
Error #: [1301, 460]
Detected at: qqem_LogicalPartition::Assign at 4
Last TOOL statement: method AppComponentVM.Install
Error Time: Wed Sep 24 11:08:34
Exception occurred (locally) on partition "Forte_cl0_Client", (partitionId
= 172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1, taskId =
[172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1.54]) in application
"Forte_cl0", pid 183 on node JOELR in environment nt_dvpte.
The partition is containing a library wrap object which Multithreaded attribute is set to FALSE;
The node to which I want to transfer the partition is a NT node while my library remains in an AIX one.
Nevertheless I can drag my partition if this library Multithreaded attribute is set to TRUE but I need it to be positionned at FALSE.
I) Anyone could tell me if there is a solution for assigning such partition on such node ?
II) What is "the thread package Forté' ?

De : Joel RIANDEY
Date : mercredi 24 septembre 1997 12:42
A : Francois BOUCHARD
Objet : Thread Package error while configuring
I've got the following error while trying to assign a partition on a node during configuration.
SYSTEM ERROR: This component cannot be moved to this node. Node does not
support logical component
Class: qqsp_ErrorDescriptor
Error Time: Wed Sep 24 11:08:34
Exception occurred (locally) on partition "Forte_cl0_Client", (partitionId
= 172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1, taskId =
[172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1.54]) in application
"Forte_cl0", pid 183 on node JOELR in environment nt_dvpte.
USER ERROR: The node ORDAM-NT_DVPT is unable to support this partition
(LaunchCcsProject_cl0_Part1). This is because either all of the restricted
projects required by the partition have not been installed on the node or the
node does not have the external resource or thread package that the partition
uses. This partition requires the restricted project(s) <none> and the thread
package Forte.
Class: qqsp_UsageException
Error #: [1301, 460]
Detected at: qqem_LogicalPartition::Assign at 4
Last TOOL statement: method AppComponentVM.Install
Error Time: Wed Sep 24 11:08:34
Exception occurred (locally) on partition "Forte_cl0_Client", (partitionId
= 172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1, taskId =
[172B8B7C-C095-11D0-9ECC-3870EE77AA77:0x33ae:0x1.54]) in application
"Forte_cl0", pid 183 on node JOELR in environment nt_dvpte.
The partition is containing a library wrap object which Multithreaded attribute is set to FALSE;
The node to which I want to transfer the partition is a NT node while my library remains in an AIX one.
Nevertheless I can drag my partition if this library Multithreaded attribute is set to TRUE but I need it to be positionned at FALSE.
I) Anyone could tell me if there is a solution for assigning such partition on such node ?
II) What is "the thread package Forté' ?

Error while configuring ADC (Additional Domain Controller)

Similar Messages

Maybe you are looking for