Error While Configuring DB adapter in Admin Server
Hello All,
i am unable to configure the DB adapter 's settings in the Console.
DBAdapter->Configuration->outbound Connection Pools ->
There was an error reading the descriptor files.
Errors occured while initializing a new deployment plan.
[J2EE Deployment SPI:260080]Unable to define application install directory at 'C:\Oracle\Middleware\Oracle_SOA1\soa\connectors'. Directory could not be created or is a file.
Hi,
The message is pretty clear, either you don't have the directory or the user starting weblogic is not able to read/write there.
If you don't have the dir, you probably have an installation problem.
If it's pointing to the wrong place you can try and fix it editing the config.xml file.
If none of the above are true, verify if the user starting weblogic has read/write permissions on that directory.
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points
Similar Messages
-
Error while configuring B2B adapter in Jdev 11.1.1.6
Hi All,
While configuring B2B adapter in jdev 11.1.1.6, i'm getting the following error at the Document definition step,
Unable to connect to URL: https://ip address:port no/integration/services/b2b/B2BMetadataWSPort due to javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: Violated path length constraints
please let me know if anyone of you faced this issue and has a resolution. We have SSL configured and using Rosettanet protocol.
Thanks,
TerryTerry,
It seems like a SSL issue related to the certificate. Can you make sure that certificate being presented by the server (hosting URL https://ip address:port no/integration/services/b2b/B2BMetadataWSPort) is valid and you have complete cert chain in the keystore of SOA server?
Regards,
Anuj -
Error while configuring BC Adapter
Hi,
I am trying to send a message from xi to bc using bc receiver adapter,but while configuring i am not sure about the parameters like url etc.
To invoke a service of bc through xi what url has to be provided?
Could you please brief me more about bc adapter configuration parameters?
What settings we have to perform in bc?
Could you give me brief idea about the process?
Thanks.Hi Shweta,
Go through these help documents..
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3bc0401b778031e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/4fb240ac052817e10000000a1550b0/frameset.htm
Hope these help!
cheers,
Prashanth -
Getting Error while configuring thirdparty adaptor on weblogic server.
Hi,
I am using Oracle SOA Suite 11g & weblogic server 10.1.3. We have requirement in which SAP need to call BPEL webservice. So i came to know that this i can achive through oracle thirdparty adaptor. I have installed this as per oracle document. Now for SAP, i am going to deploy J2CA into weblogic server. I am getting following error. Could you please help me on this?
java.lang.IllegalArgumentException: </resourceadapter> </connector> icrosystems, Inc.//DTD Connector 1.0//EN' 'http://java.sun.com/dtd/connector_1_0.dtd'> <connector> <display-name>IWAFJCA10</display-name> <vendor-name>IWAY Software</vendor-name> <spec-version>1.0</spec-version> <eis-type>IWAF</eis-type> <version>1.0</version> <license> <license-required>false</license-required> </license> <resourceadapter> <managedconnectionfactory-class>com.ibi.afjca.spi.IWAFManagedConnectionFactory</managedconnectionfactory-class> <connectionfactory-interface>javax.resource.cci.ConnectionFactory</connectionfactory-interface> <connectionfactory-impl-class>com.ibi.afjca.cci.IWAFConnectionFactory</connectionfactory-impl-class> <connection-interface>javax.resource.cci.Connection</connection-interface> <connection-impl-class>com.ibi.afjca.cci.IWAFConnection</connection-impl-class> <transaction-support>LocalTransaction</transaction-support> <config-property> <config-property-name>AdapterName</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value>SAP</config-property-value> </config-property> <config-property> <config-property-name>Config</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value></config-property-value> </config-property> <config-property> <config-property-name>IWayHome</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value>D:\Oracle\ora11g\fmw11gHome\Oracle_SOA1\soa\thirdparty\ApplicationAdapters</config-property-value> </config-property> <config-property> <config-property-name>IWayConfig</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value>J2CA_SampleConfig</config-property-value> </config-property> <config-property> <config-property-name>IWayRepoDriver</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value></config-property-value> </config-property> <config-property> <config-property-name>IWayRepoURL</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value></config-property-value> </config-property> <config-property> <config-property-name>IWayRepoUser</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value>weblogic</config-property-value> </config-property> <config-property> <config-property-name>IWayRepoPassword</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value>weblogic1</config-property-value> </config-property> <config-property> <config-property-name>LogLevel</config-property-name> <config-property-type>java.lang.String</config-property-type> <config-property-value>DEBUG</config-property-value> </config-property> <config-property> <config-property-name>LogSize</config-property-name> <config-property-type>java.lang.Integer</config-property-type> <config-property-value>100000</config-property-value> </config-property> <config-property> <config-property-name>LogCount</config-property-name> <config-property-type>java.lang.Integer</config-property-type> <config-property-value>10</config-property-value> </config-property> <authentication-mechanism> <authentication-mechanism-type>BasicPassword</authentication-mechanism-type> <credential-interface>javax.resource.spi.security.PasswordCredential</credential-interface> </authentication-mechanism> <reauthentication-support>false</reauthentication-support> is not a legal value for TransactionSupport. The value must be one of the following: [NoTransaction, LocalTransaction, XATransaction]
ThanksHi,
anybody has any idea on this??
i am also facing one issue in which after installing Oracle Application Adaptor. i am not able see adaptors detail like SAP, peoplesoft, JDEdwards, Siebel.
Please help me onthis issue.
Thanks
Amit -
on a backup DNS w2008 R2 server I tried create a new VM.
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
The server encountered an error while configuring hard disk on SEPmW8.
[Content]
You might not have permission to perform this task.
[Close]
when I tried creating v a new Vhd using default or custom folder, I get
[Window Title]
New Virtual Hard Disk Wizard
[Main Instruction]
The server encountered an error trying to create the virtual hard disk.
[Content]
You might not have permission to perform this task.
[Close]
But I verified the admin ID does have full access to the folders. furthermore it belongs administrators, domain Admins, enterprise admins,
What gives? what additional privilege I need to give to the login ID, I tried in vain adding to Virtual machines but got rejected. I also could not locate anything like virtual machines in the active directory,
Btw I finally managed to create a new VM wi/ VHD but still can't create new vhd
------------Platform info ---
the physical quad core Xenon server for backup dns also works as exchange server
has 12 GB RAM, 931 GB Raid 5 storage with 325 GB free.These actions are not performed in the security context of the user. The Local System / computer account of the Hyper-V Server is what needs the access, not the user.
Also, many AV products will cause these problems if the exclusions are not set properly, as they block the hypervisor from doing its job.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====Have you installed AppController on the same machine with VMM?
-
SQM uploader error while configuring BizTalk Server
Hi,
I am getting following error while configuring BizTalk Server 2013 on Windows Azure VM
Log Name: Application
Source: Application Error
Date: 8/26/2013 1:08:46 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: BizTalk2013VM
Description:
Faulting application name: SqmUploader.exe, version: 3.10.229.0, time stamp: 0x50fe35e2
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18015, time stamp: 0x50b8479b
Exception code: 0xe0434352
Fault offset: 0x0000000000009e5d
Faulting process id: 0x988
Faulting application start time: 0x01cea27eec7ba1b4
Faulting application path: C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 2acf119c-0e72-11e3-9e61-00155d6120c3
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-26T17:08:46.000000000Z" />
<EventRecordID>32154</EventRecordID>
<Channel>Application</Channel>
<Computer>BizTalk2013VM</Computer>
<Security />
</System>
<EventData>
<Data>SqmUploader.exe</Data>
<Data>3.10.229.0</Data>
<Data>50fe35e2</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18015</Data>
<Data>50b8479b</Data>
<Data>e0434352</Data>
<Data>0000000000009e5d</Data>
<Data>988</Data>
<Data>01cea27eec7ba1b4</Data>
<Data>C:\Program Files (x86)\Microsoft BizTalk Server 2013\CEIP\SqmUploader.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>2acf119c-0e72-11e3-9e61-00155d6120c3</Data>
</EventData>
</Event>
Any help will be highly appreciated.Hi Nilesh,
Following article should help you:
http://social.technet.microsoft.com/wiki/contents/articles/11426.windows-azure-biztalk-services-resources-on-the-technet-wiki.aspx
I hope this helps!!!!!!
Maheshkumar S. Tiwari|BizTalk Developer Interview Questions and Answers
http://tech-findings.blogspot.com/ -
Error while Configuring environment parameters
Hi,
I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
Database- Oracle 11g R2
OS- Windows Server 2008
1. Environment Description
Environment Description: DEV01
2. Business Application Server Configuration
Business Server Host: 01HW342889
WebLogic Server Name: myserver
Business Server Application Name: SPLService
MPL Admin Port Number: 6502
MPL Automatic startup: false
3. Web Application Server Configuration
Web Server Host: 01HW342889
Web Server Port Number: 6500
WebLogic SSL Port Number: 6501
Web Context Root: ouaf
WebLogic JNDI User ID: systemjndi
WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
CcwlbnXl2b1kMnvE8DD0wfI1Y=)
WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Server Name: myserver
Web Server Application Name: SPLWeb
Application Admin User ID: appladmin
Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
cBz4cubUr2U5BbRl75SY2pP6Q=)
Expanded Directories: false
Application Viewer Module: true
4. Database Configuration
JDBC Name: oubi-jdbc
MPL Database User ID: SPLADMV2
MPL Database Password: ENC(mfG7quacTagw5qEvov
oaQIRpnogRvroY4NcXp6WZCZo=)
XAI Database User ID: SPLADMV2
XAI Database Password: ENC(tNfRJUthvYQR990TzW
314nXU+5jWBuYBDs5AgT5qG7g=)
Batch Database User ID: SPLADMV2
Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
kFDsgUIjDm5I6TJU5Suz0Wy/k=)
JDBC Database User ID: SPLADMV2
JDBC Database Password: {3DES}L43JfrbOrCtupkwm
4I/Adw==
Database Name: DEV1
Database Server: 01HW342889
Database Port: 1701
ONS Server Configuration:
Database Override Connection String:
Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
5. General Configuration Options
Batch RMI Port: 6509
Batch Mode: CLUSTERED
Coherence Cluster Name: OUBICLUSTER1
Coherence Cluster Address: 172.25.138.45
Coherence Cluster PORT: 6508
Coherence Cluster Mode: dev
Each item in the above list should be configured for a successful install.
Choose option (1,2,3,4,5, <P> Process, <X> Exit): P
--> Calculating additional variables ... done.
--> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
N.INI ... done.
Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
"ERROR - Detected while running install.plx."
Thks,
MohanThis is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post -
Error while configuring Informatica Repository
HI,
I am getting error while configuring repository services in Informatica(http://host:6008/administrator) can any one rectify how to do this
this is log i found in infoematica - services
OBJM_54538
Unable to connect to the repository Info_rep on database ORCL.
PowerCenter Repository Service
Info_rep
ERROR
01/18/2013 02:24:17.838 AM
3003197664
REP_51002
Failed to logon to Database server
Database driver error...
Function Name : Logon
Error while trying to retrieve text for error ORA-12154
Database driver error...
Function Name : Connect
Database Error: Failed to connect to database using user [info_rep] and connection string [ORCL].
PowerCenter Repository ServiceThis is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post -
Error While Installing IDES ECC6 with SQL Server 2005
Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade. -
Error while using DB Adapter in BPEL process
Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?did u deploy your dbadapter through console to the plan mentioned for deployment?
-
Error while configuring talent profile for ESS
Dear Experts
I am having following error while configuring talent profile for ESS:
The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
Note
The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
Method: GET_NEXT_UIBBS of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
Method: RUN_EVENT_LOOP of program CL_FPM========================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Any suggestions on how to resolve the error?
Regards
ImranImran,
check this thread
http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
Thanks
Bala Duvvuri -
Error While Configuring the Shared Service with Active Directory
Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
SunilThank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan.... -
Error while Configuring Repository INS0017: Installation of the seeded data
I am getting error while configuring repository at 36%
Error:
Seeding Failed:
The warehouse builder workspace owner installation failed on user OWBSYS.
INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
xmlClasses.xml (Access is denied)
Operating system: Windows 2008 server 64 bit
Database: Oracle 11g Release 11.2.0.1.0 64 bit
Log file is not created in given location(Unified repos)Hi David,
But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
Nawneet -
ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.
I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it.
Maybe you are looking for
-
Iphone 5s - slider wont slide when receiving call. What do I do???
Hi - Both my mom and I have 2 week old iPhone 5s'. Both of us have had issues where it is often difficult to answer incoming calls. Its as if the slider is broken. I can often get the slider to slide, thus answering the call, right before it goes t
-
Having trouble getting computer to read MicroSD
I currently have a MacBook Pro running Mac OS X 10.5.8 that will not read my 64GB class10 MicroSD card off my GoPro3 camera. I read in another forum that this is because OS X 10.5 doesn't support exFAT format which is what both the card and camera ar
-
Prevent reschedule on released process order in APO
Hi, We have a business requirement that does not want APO to reschedule on released process orders regardless of production posting quantity. (don't want to change the order end date/time) It is similar to R/3 scheduling type "only capacity require
-
Finding the "best" application for backing up
Any advice for a computer illiterate who needs to find the best app to use for backing up to a portable external drive. I have seen many mentioned. I need a user-friendly, cheap, reliable one (for tiger). I am computer dumb, so please understand if I
-
Mac OS 10.6 Safari 4.0.3. Cannot get Flash Player to install.
Did an archive and reinstall of the OS, then went to download center and downloaded Flash Player (again), but when I try to open a video, continue to get the message that I need to download the latest Flash Player. Called Applecare and they got me th