Error while configuring GCM: The push settings were not saved. Error 400

Hi,
While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
I have regenerated the key multiple times but of no use.
Am I missing something? I am a paid subscriber of Azure
Thanks, Laks.

Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
is no associated hub, you will always get errors when trying to configure.

Similar Messages

  • Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"

    Hi,
    Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list.  The operation failed" 
    I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
    She is also getting this error when she tries to remove a delegate.
    I have tried recreating her mail profile.
    I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
    She is on Exchange 2010
    Any assistance would be appreciated.

    The article you provided is not related to the error message that the user is getting it.
    Can you please provide better solution? I know this answer and this post is old but I am having same issue.
    The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

  • Microsoft Outlook 2010 The delegates settings were not saved correctly. Cannot activate Send-on-behalf-of list. You do not have sufficient permission to perform this operation on this object.

    I am trying to assign delegation to a user and I receive the following message.
    The delegates settings were not saved correctly.  Cannot activate Send-on-behalf-of list.  You do not have sufficient permission to perform this operation on this object.
    We are using 2010 for the server and client.  There are only specific mailboxes that this is happening for after being migrated from Lotus Notes.  The user can use their mailfile fine however it is just the delegation that appears corrupted somehow. 
    I'm not sure how to fix this.  I have checked the access through the security tab in ad and that looks fine.
    Any help would be appreciated.

    I did some more digging and I solved it.
    This would be the solution:
    In Active Directory Users and Computers
    -Click on VIEW
    -Click on ADVANCE FEATURES  (this is important otherwise you won't see
    the complete list in the next steps)
    -Click on the USERS container
    -Find the problem user's account
    -Right mouse the account and click on PROPERTIES
    -Click on the SECURITY tab
    -In the top box, click on the SELF account
    -In the bottom portion of the screen make sure the READ PERSONAL
    INFORMATION  & WRITE PERSONAL INFORMATION  should both be checked for
    ALLOW
    If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
    not work, more than those 2 permissions were missing.
    Good luck!
    David

  • VMware Player: Error while powering on: The file specified is not a virtual disk.

    dear vmware community,
    starting position:
    - vm (os ubuntu) running on esx 4.1
    - i moved the vmdk and vmx file on a windows client, for testing a local update
    - when i power on the vmx with vmware Player 7.1 i receive the error message:  Error while powering on: The file specified is not a virtual disk.
    anyone an idea for me? thank you!

    hi continuum,
    thanks for your replay.
    all files in D:\Webservice
    i also try to "create a new virtual machine" and attach the vmdk file. same error.
    would be great if you any idea for me!

  • I got a message "the settings were not saved for the iPod "Jenny's iPod" because it could not be found. But I named my iPod "Jenny's iPod". What should I do?

    What should I do to connect to my iPod?

    - Are you updating clicking on the update button in iTunes?
    Try a reset. Nothing is lost.
    - Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try deleting file and try again. It is located:
    IPSW file location for Mac and Windows

  • Intermittent errors while configuring a model in custom ui: P_3040383 :4 No

    Hi All,
    We have implemented custom configurator in our company. It was working fine, but from last one year we are getting some intermittent error while configuring an item from custom ui.
    All errors look like this.
    P_3040383 : No such variable defined
    This number P_3040383 changes every time.
    This is an intermittent issue. To replicate this issue we need to keep on trying to configure an item with same options. After trying 2-3 time this error occurs. We are facing this issue in all the models we are using. Please help and let us know how to find the root cause of the issue.
    Thanks
    Anil Chamoli
    Edited by: 950124 on Jul 31, 2012 4:36 PM

    Hi Hussein,
    I tried to capture the runtime exception in jserv.log file and found that most of the time it throwing error in below code.
    ioption.getState()
    another piece of code that is throwing same error.
    IRuntimeNode iruntimenode1 = statusinfo.getNode();
    IRuntimeNode iruntimenode2 = iruntimenode1.getParent();
    int j = iruntimenode1.getType();
    I also got below exception but it is very rare.
    oracle.apps.cz.cio.LogicalRuntimeException: Fatal Logic Error: P_1964 :4 No such variable defined
    I am not able to understand why same code shows two different behavior for same set of data.
    Please give me some idea so that i can work in right direction.
    Thanks
    Anil Chamoli

  • Nokia N8 camera settings is not saved

    Hey.
    I found out that all the camera settings is not saved. For exampel i always want the grid displayed but then i have to turn it on manuelly every time. Same goes for the timer, id like it to be on 2sec so the picture not is taken as you push the button (shaky etc).
    Probably more camera settings that not saved havent checked it all.
    Solved!
    Go to Solution.

    OK first of all look at this, 333 people viewed your original post and followed by 171, 144 and the last one that you responded 55 people viewed and yet your the only one with this problem lol
    Here is the thing, I'm sure nokia had a damn good reason for not letting the grid option be set as default, and if you can't press two buttons to get to it, well that's your own fault for being lazy lol all these people viewed your post and not even one decided to say something, that's probably because no one really have a problem with what your complaining about and I don't count that new user since all her said was "No reply from Nokia on this???" hehe
    anyways if nokia makes any changes in their camera setting and give us more options, well GREAT, but right now most people are happy with their N8 camera and its setting. Their are much more important issues regarding Nokia N8 and you picked the least important one lol way to go.
    Don't forget that you  can't compare the N8 with a digital camera, just because you can do things differently on a digital camera doesn't mean you suppose to do it on a camera phone. In my opinion the N8's setting is damn good, could get better and if nokia does something about it Great but I can do what I wanna do with the setting. So please try not to bring up any little problem you thing it has or you thing needs to be changed because I really don't think what you calling a problem is a problem
    Nokia N80
    Nokia N82
    Nokia N97
    Nokia N8 Dark Gray- RM-596

  • Server settings are not saved on client

    The client has a new workstation (Vista) where the server settings are not saved. The client is able to login but have to setup the server settings overtime she logs on to SAP B1.
    Client: Vista
    SBO: 2007A SP01
    what is causing this and how can this be resolved?

    You may check these threads first:
    Re: Server name in Change Company does not stay
    Re: SQL Connection to SAP Reset
    Thanks,
    Gordon

  • Error While Configuring the Shared Service with Active Directory

    Hi All,
    I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
    "EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
    The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
    But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
    "The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
    Example: cn=admin,dc=myCompany,dc=com
    But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
    Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
    Thanks in Advance,
    Sunil

    Thank you All,
    i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
    after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
    Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
    Thank you once again Friends....
    Regards,
    Sunil...
    Shantan....

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • Error while Configuring Repository INS0017: Installation of the seeded data

    I am getting error while configuring repository at 36%
    Error:
    Seeding Failed:
    The warehouse builder workspace owner installation failed on user OWBSYS.
    INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
    xmlClasses.xml (Access is denied)
    Operating system: Windows 2008 server 64 bit
    Database: Oracle 11g Release 11.2.0.1.0 64 bit
    Log file is not created in given location(Unified repos)

    Hi David,
    But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
    and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
    Nawneet

  • Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

    Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
    Dell Latitude E7440 i7-4600U @ 2.10GHz
    I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
    Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
    Failed to create the virtual hard disk.
    The system failed to create C:\Users\user\Documents\Test\New.vhdx .
    Failed to create the virtual hard disk
    The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
    I have ran all Dell Client System updates and all of windows updates.
    I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
    I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
    Any thoughts on how I can fix this?
    Thank you,
    -Jake

    Hi Jake,
    "Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
    1. Uninstall Intel Active System Monitor 3.0, if installed.
    2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
    3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
    4. Change the Start Key to 4 (Disabled).
    5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
    6. Take ownership of the ‘Properties’ key.
    7. Give yourself full permission for this key.
    8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
    9. Try attaching or adding the VHD again after rebooting.
    If above steps did not help, add the Network Service account to Local Administrator group."
    It is quoted from the similar thread below :
    http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
    Hope it helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hyper-V encountered an error while Configuring the network on Vmachine

    Hi all,
    i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
    Hyper-V encountered an error while configuring the network on Vmachine 
    Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
    on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

    Windows Server 201? Are you sure?
       What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
    Bill

  • New Virtual Machine Wizard error: The server encountered an error while configuring hard disk on SEPmW8

    on a backup DNS w2008 R2 server I tried create a new VM.
    [Window Title]
    New Virtual Machine Wizard
    [Main Instruction]
    The server encountered an error while configuring hard disk on SEPmW8.
    [Content]
    You might not have permission to perform this task.
    [Close]
    when I tried creating v a new Vhd using default or custom folder, I get
    [Window Title]
    New Virtual Hard Disk Wizard
    [Main Instruction]
    The server encountered an error trying to create the virtual hard disk.
    [Content]
    You might not have permission to perform this task.
    [Close]
    But I verified the admin ID does have full access to the folders. furthermore it belongs administrators, domain Admins, enterprise admins,
    What gives? what additional privilege I need to give to the login ID, I tried in vain adding to Virtual machines but got rejected. I also could not locate anything like virtual machines in the active directory,
    Btw I finally managed to create a new VM wi/ VHD but still can't create new vhd
    ------------Platform info ---
    the physical quad core Xenon server for backup dns also works as exchange server
    has 12 GB RAM, 931 GB Raid 5 storage with 325 GB free.

    These actions are not performed in the security context of the user.  The Local System / computer account of the Hyper-V Server is what needs the access, not the user.
    Also, many AV products will cause these problems if the exclusions are not set properly, as they block the hypervisor from doing its job.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.

    I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5.  I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool".  When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005].  Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges".  However, I did not experience this error with all of the migrated sites.  I traced my steps backward to discover the problem.  I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS.  I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc.  Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine.  In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well. 
    Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting.  Why would this make wsconfig.exe crash?
    Thanks in advance and I hope this saves someone from hours of research and frustration.

    DiscoDelight,
    Have you forwarded this information directly to the ColdFusion product team?  If not, I'll try to draw their attention to it.  Only a few of them are active on these forums, so this issue might be overlooked.
    -Carl V.
    EDIT: I just pinged them on Twitter to take a look at this post.
    EDIT #2: They just pinged me back that they are looking into it.

Maybe you are looking for